Related
Hi guys, i am currently trying to set up my Athena with my car, i wonder if it's possible to connect my Athena with a external touch screen monitor like this one: http://cgi.ebay.co.uk/8-INCH-TOUCH-...9QQihZ005QQcategoryZ32826QQrdZ1QQcmdZViewItem
throw the VGA cable.
I know it will display the screen throw VGA out, but I am not sure whether it will enable the touch screen function, any of you know this?
Thanks a lot
p.s. I will post some screen shot if I succeed in this project.
Is that a PS2 port?
Seems to me the key question is how would it get positioning info back to the ameo? That looks like a PS2 port on the non-vga cable. IF it was sending back mouse positioning info AND a simple ps2 to USB converter would work then I'd guess it MIGHT work with the mouse drivers i've seen discussed elsewhere. There is a fair few conditions to meet but mostly at a low level by the look of things. Not much info to go on and also it loks like they are using a pen of some kind there. That makes it less useful I think?
inframan said:
Seems to me the key question is how would it get positioning info back to the ameo? That looks like a PS2 port on the non-vga cable. IF it was sending back mouse positioning info AND a simple ps2 to USB converter would work then I'd guess it MIGHT work with the mouse drivers i've seen discussed elsewhere. There is a fair few conditions to meet but mostly at a low level by the look of things. Not much info to go on and also it loks like they are using a pen of some kind there. That makes it less useful I think?
Click to expand...
Click to collapse
I am sure you don't need a pen, there are lots of touch screen out there, for example this one: http://cgi.ebay.co.uk/ws/eBayISAPI....tToStoreCat&refwidgettype=cross_promot_widget
I just don't know if we simply plug in the vga cable from our Athena to the touch screen, will that work?
Possibility not, I can kind of see a usb cable there, how about plug that in the usb host ? but then maybe we still need to install the driver.....
Basically, what I am trying to do here to use get a bigger screen to show for Athena in a car. So, I will then have much bigger TOMTOM, and also can watch movie or go on internet.
Any good suggestion guys? Thanks a lot for all your help.
I cant see any specks on that, but i did find another that said it was usb, if thats the case theres no reason why it shouldnt work.
johnwalk said:
I cant see any specks on that, but i did find another that said it was usb, if thats the case theres no reason why it shouldnt work.
Click to expand...
Click to collapse
it seems like they all need to install driver, do you think it will work without driver?
thats the only problem, does it need specialist drivers? I havnt been able to come up with an answer yet.
But i wont be buying one for the car, somone nicked me vario yesterday from the car so not even chancing the Ameo.
I was just going to buy a little 7" tv I bought this tiny Keyboard out of Maplin on offer. thought it would look sweet in the car. but this is giving me other ideas, anybody shed light!
They ALL need specialist drivers.
Touchscreen is absolute position, mouse is relative. You NEED the custom driver. It may be possible, but I dont know how.
1. I think on the Pic is a S-Video cable not PS2.
(The specs say nothing about PS2)
2. Till now i just saw Touchscreens with USB and like Profer said they all
need secial drivers.
Basmelek said:
1. I think on the Pic is a S-Video cable not PS2.
(The specs say nothing about PS2)
2. Till now i just saw Touchscreens with USB and like Profer said they all
need secial drivers.
Click to expand...
Click to collapse
Thanks for your answer, i just ask one of the seller there on ebay, and the answer I got is I will be able to plug the VGA cable in, that will enable the screen to display, but in order to get the touch screen working, I also need to plug in a USB, so now the question is whether the USB host will work on this....and of course the driver need to work too
The 4in1 cable should allow the USB to connect, but you would have to convince 3m or somebody (make most of the drivers) to write a PPC driver.
As almost ALL ppc's are touchscreen, they probably wouldnt bother for the 1 customer that wants it
If you know a coding guru who understands USB, then get them to do it for you. Either way, I doubt its gonna happen.
IT WORKS!
Hi, everybody.
Don't know how many of u are interested in this issue, but anyway:
1. just grab the generic touch screen driver for win ce 5.0 from the usual site.
2. Copy 'n paste the UsbTouch.dll file into windows root directory of the X7500.
3. Plug the video cable (the one with usb connector).
4. Plug the xenarc TS usb cable in the abovementioned cable.
5. Wait for the dialogue box asking for the driver to be used with the unknown device.
6. Write the name of the .dll file copied into the device.
7. Press ok.
et voilà, les jeux sont fait! It woks perfectly, without even the need for calibration.
This is (even if it lacks some of the fun of setting up a carputer from scratch) the ultimate carputer, perfect integration among all application and real time (quite) OS.
Cheers.
Cyberlancer.
Pyrofer said:
The 4in1 cable should allow the USB to connect, but you would have to convince 3m or somebody (make most of the drivers) to write a PPC driver.
As almost ALL ppc's are touchscreen, they probably wouldnt bother for the 1 customer that wants it
If you know a coding guru who understands USB, then get them to do it for you. Either way, I doubt its gonna happen.
Click to expand...
Click to collapse
Your on the right track with this answer,
Look for a touch screen that has a protocol that is treated as a standard HID ( Human interface device ) Ie:mouse, keyboard etc.etc.
if you can find such a device then the built in drivers for plug and play HID's will work fine.
otherwise the rest are right
Did this really work??? What car? This would simply be quite fantabulous.
cyberlancer said:
Hi, everybody.
Don't know how many of u are interested in this issue, but anyway:
1. just grab the generic touch screen driver for win ce 5.0 from the usual site.
2. Copy 'n paste the UsbTouch.dll file into windows root directory of the X7500.
3. Plug the video cable (the one with usb connector).
4. Plug the xenarc TS usb cable in the abovementioned cable.
5. Wait for the dialogue box asking for the driver to be used with the unknown device.
6. Write the name of the .dll file copied into the device.
7. Press ok.
et voilà, les jeux sont fait! It woks perfectly, without even the need for calibration.
This is (even if it lacks some of the fun of setting up a carputer from scratch) the ultimate carputer, perfect integration among all application and real time (quite) OS.
Cheers.
Cyberlancer.
Click to expand...
Click to collapse
I have the following problem with my HTC Touch HD. Since yesterday after i transfered 2 video files and a few pictures, when i connect it through USB, the computer doesn''t detect HTC anymore (nor syncing nor file transfer). Even the Bluetooth syncing does not work. I performed several soft and hard resets, and it seems it;s getting worse after every reset.
I bought the phone 2 weeks ago, after i sold my Apple iPhone 3G 8GB. As we speak, i kind of regret i did that...any advise for me ?
I forgot to mention: when i plug the uSB cable, the device goes recharging.
Have you tried booting your pc ?
Also try unchecking Settings/connections/Usb to Pc/ "enable faster data synchronization"
r
Andrew
What cable do you use? I had similar problems with non original (asus) usb cable.
greetings everybody..
1) i tried what you said several times, no result.
2) i get same results with the original and the other cables..
3) i noticed one thing . . . if i connect the device to a computer that i never conected before the device, it launches active sync....and Active Sync just wont interact with my device.
Did you try reinstalling ActiveSync on your PC?
yes i tried....same result. Do you think a change of ROM would solve that ?
Now, even a syncronisation using bluetooth is almost impossible, since i cant pair the computer and the device. Damn, it's like a virus or something.
stupid thought:
Do you think a change of ROM would solve that ?
Click to expand...
Click to collapse
Impossible since i cannot connect using USB. Sorry !
I too had problems with my PC not recognizing the HD. Found out that it was a problem with my firewall and anti-virus. I adjusted anti-virus settings to allow active sync to pass through and have had no problems after that.
HTC also recommends going to Start --> Settings --> Connection tab --> USB to PC and deselect the checkbox for "Enable faster data sync"
For device recharging when plugged in to USB : go to Start --> Settings --> System tab --> Power. here below the battery charge indicator, there is a checkbox. Read the message and check/uncheck as desired.
Hope this helps !!
i thought one potential source for my problem would be the antivirus, but i disabled firewall (eset at work and symantec end point protection at home) and no result what so ever.
I cand figure a way to sync the device even with the bluetooth since i cannot pair the device and the computer.
I am starting to regret i bought HTC...
Try click the Activesync icon on HD Program, there is a "Option" on the menu, click and see if you could delete all the old connect. If yes, re-establish the connection again to see.....good luck
Option menu item is disabled (i performed several hard resets)...(
Another thing i noticed. I unchecked the box (when connected to USB charge), so now when i plug the usb cable, it wont charge. But, if the device is in stand by (black screen), and i plug the usb cable, it wakes the device up. So, in my mind, i think it is something wrong with the OS, it still "feels" the USB cable, but cannot (for an unknown reason) take the necesary action.
For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so.
Is there any way to reinstall ActiveSync on my HTC device ?
daemonus said:
Option menu item is disabled. For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so. Is there any way to reinstall ActiveSync on my HTC device ?
Click to expand...
Click to collapse
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
NLBeev said:
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
Click to expand...
Click to collapse
Tonight i will try to install at home Windows VIsta (at work and at home right now i have XP). I cannot use my phone - no phone number in agenda and it's driving me mad. The phone rings and there are quite a few persons i dont want to talk with.. HEEEEEELP
nobody there to help me ?
If you did a hard reset, and you can connect in drive mode, but can not sync, then I am 99.9% sure that there is nothing wrong with your phone, but that your computer is messed up.
Uninstall all your antiviruses, firewalls, and other bloatware, and see if it works then.
Just a possible solution, but did you try plugging in your phone into other USB slots on your PC? Are you perhaps trying to sync it through an USB extension cord, or maybe USB hub? I had problems with my PC recognizing the THD if I tried syncing that way. Best results were plugging it directly into the back side of the casing.
The reason I'm asking this is that if you have too many USB devices plugged in, it's possible that the USB voltage drops too low and devices won't connect to the computer.
I tried on 5 different computers, all available USB ports.
On a new computer, sometimes on the device screen it shows up Active Sync but that is all, no sync occurs. If i try again on that computer, i get the same result as i get using the computer at home or work.
The device cannot conect as a Disk Drive
Is there a way to reinstall Active Sync on HTC ? My guess is that this software is all gone with the wind (even i performed a hard reset). The big question is what the hell happened ? Could be a ROM fault ? I mention i never tried to change ROM, the only software i installed was S2U2 and Core Player.
If by monday it wont work, then i'll send it into service (i have warranty). But i hate service
all out of ideas...
Any ideas ?
Which items are checked when you go to Settings/connections/Usb to Pc/ on youre phone?
Have you tried to use another memory card (because youre problems started with copying)?
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Same thing here.
It charges through USB but it doesnt connect.
If i choose the storage option it works fine.
I want to sync my outlook and i cant...
What the heck...?
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Come on... give something drastic!
Already done that, rebooted the pc and the hd2...
still nothing
djchubbs said:
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Click to expand...
Click to collapse
believe it or not i have done that mannyy times and did alot of device manager things to try and let both computers recognize the hd2 but still nothing haha..
ive had previous hd2's and they've all connected fine untill this one, maybe its this specific one thats giving me trouble. but regardless, it charges via usb then it should be able to recognize it
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
johncmolyneux said:
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
Click to expand...
Click to collapse
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
k20a1 said:
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
Click to expand...
Click to collapse
That is very weird. Sorry mate - never heard of it doing that for anyone before.
Make sure you have the mobility center/active sync program installed on your computer. Without it it won't work.
On Vista or Seven, with the HD2 plugged in, you can find the program/drivers by launching and refreshing manually Windows Update. On XP you have to do that manually.
Good luck.
This happens to me often. In my case I have found it to be a weird driver issue. Go to device manager and look for the yellow triangle. Right click and update driver software. This worked for me I hope it helps.
bit late but just flashed maxsence and i love the look, but have allready had to restart by phone 10 times in 10 minutes. I'll wait for the next release. back to GTX for now.
Good work NRG. keep it up.
this is one of the many WM6.5 errors!
need Android soon!
Ok here we go.
The phone did not connect through activesync to my pc. When i selected to connect as mass storage it connected.
I checked for driver issues in device manager but nothing came up.
I checked the hd2's activesync. Bingo! the activesync was crashing when i was running it. I had to hard reset the phone.
Now it works fine.
My guess is that maybe a program that i installed recently was buggy and created this particular problem. Unfortunately i have about 50+ programs installed (including themes etc) and i m not sure which one it was.
I was installing all the programs again today one by one and after the install process was completed i connected the hd2 to usb to find which app was the problematic one.
After installing almost(some were found useless) all of the apps (here is the crazy part) the hd2 still was connecting through activesync....
HTC will drive me nuts...
Anyway the phone now connects correctly.
I cant understand which was the problem....
as odd as it may sound i think i figured it out.
i think its the usb cable that im using, i have to wiggle it around for it to connect to active sync but once it connects its not a stable connection as it cuts in and out.
but charging capabilities work though!
pos wire, i ordered a new wire and if that one fails also, i will have to get my hd2 replaced for faulty usb port
thanks for all the replies much appreciated
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
angelossssss said:
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
Click to expand...
Click to collapse
i did whenever i custom rom'd it, it still does the same thing. yes it will connect via usb while in bootloader but will not during regular phone operations lol
"Disk drive" mode not working with XP laptop
HD2 is working fine with my desktop, but wit laptop I can only use ActiveSync to browse files.
When I connect the USB cable I get:
"Found new hardware wizard"
but it tells me that it Cannot Install This Harware - Disk Drive
"An error occurred during the installation of the devie The system cannot find the file specified"
And I only have "Finish" to click - if I click it the wizard lunces again immediately and goes on and on with no end.
HD"/Leo does not appare in Disk Manager (I know ablut the drive lettering issue)
I'm sure its my XP issue, but I havent found drivers to fix that, and I'm not about to reinstall XP on my lappy in near future.
Transfer files - Solved
;
k20a1 said:
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Click to expand...
Click to collapse
I share the same here and I was despaired of trying to solve it with any logical, as well with illogical, measures. Such as: rebooting, changing usb cables, reinstalling activesync 4.5, etc.....etc...blla..blla...blla...
However, I solved the "Transfer files issue" by taking out the sd card from the HD2 and connect it with an external cards reader to my pc.
The card reader connected and works with the same usb cable that does not work with the HD2.
That way I load it with all files and in the same occasion I reload into my computer the daily spb backup files.
However, I have the feeling that the reason for that problem is a missing file/driver named: "Setup1.SPL" in the pc windows operating system.
In order to solve that it seems that only reinstalling windows on my pc will be the solution which defiantly do not like.
hi guys,
i have searched the forums for wm 6.5 ROM, but lots of them are still in beta phase,have bugs or slow.
can anyone give link to a stable WM 6.5 ROM for my xda orbit
Thanks in advance
...
6.5
Babbelut ROM WM6.5-28005 v0.3 NLD/WWE
*spb mobile shell is great, he is currently developing beta rom
http://www.sendspace.com/file/97d3p7 (download link for v.3)
http://www.megaupload.com/?d=ZTXWO4D7 (download link for v.Beta)
Downloading it now, will check it later on. THX
Was about to create topic but found this and hopefully will try this and hope it works on my XDA Orbit 2. I brought it off Cex from Aylesbury and it needs some love and update as i have Windows Mobile 6.1 (eeurrgh) and brought it off cos i thought i can upgrade to Winodws Mobile so i hope these works well for me.
Any introductions of doing that?
Thanks in advance.
First link didnt work. The XDA tried to block it by restarting it themselves. Tried third time. And unlucky.
Second Link. How can i use NBH file for my XDA?
...
Wrong place dude..
this is for xda orbit 1/artemis..
your looking for xda orbit 2/ poloris..
you need to be here..
Rn
Hi all I'm new here. My phone "O2 XDA Orbit" behaving strangely. Suddenly the sound disappeared and I can not hear phone calls directly into the phone, and any other person hears me not(microphone off), and not just one click sound on the screen. If I restart the phone with USB cable inserted into the phone and computer (on), then the sound occurs again(but not in original style, sound occur in to the back speaker not in front ), and phone function almost normally with microphone (on)>>> until the next reboot when sound disappear again and microphone is off. I mention that;.... connection the phone to the computer can not be achieved in any of this cases. The error code (USB connection) connection on my computer is {Code 10(One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it)} who can not recognize the new hardware. In your opinion of specialists in this field what would be done? I think something happens to the ROM which gives errors of hardware power. The sound occurs when I insert into the phone power charger connector and disappears when the power supply plug out ... Please if you can help me with some guidance what I have to do one upgrade of ROM or something? Specification of the phone is:
[*]IPL-3.04.0001
[*]SPL - 3.04.000
[*]OS - 3.4.0.0
[*]CPU - OMAP850
[*]Speed 201Mhz
[*]RAM 64Mb
[*]Flash 128Mb
[*]Data bus 16bits
[*]ROM 3.4.206.2WWE
[*]ROM date 4/18/07
[*]RADIO Vers. 02.67.90
[*]PROTOCOL Vers. 4.1.13.28
[*]EXT. ROM.Vers 3.4.206.101
[*]MODEL of phone -ARTE200
[*]Platform - PocketPC
Funny ...!!! Today I put the phone to the charger and after I removed the plug from the power supply, the sound has returned, but the USB connection to a PC still can not set ...! What should I do? A new version of Windows can install on my phone; without connecting the USB cable to the phone(ex.-of my card micro SD)??
Adryum said:
Funny ...!!! Today I put the phone to the charger and after I removed the plug from the power supply, the sound has returned, but the USB connection to a PC still can not set ...! What should I do? A new version of Windows can install on my phone; without connecting the USB cable to the phone(ex.-of my card micro SD)??
Click to expand...
Click to collapse
have you got activesync or windows mobile device centre installed on the pc?
if yes..
i suggest you buy a new usb cable.
i have this problem with a couple of cables.
"USB DEVICE NOT RECOGNISED"
but when i change to a differant cable, everything is ok.
flashing via micro sd - upgrading windows.
have you done uspl 1.11.cmon?
Thanks for your attention Raving in the first place ...! Data cable has no damage that I checked the same cable with my photo camera and it works normally with PC and I have two more data cables and the problem is the same. It seems weird that the phone do some work once, ...once not. It starts when he wants the sound, and can not find any explanation ... In contrast with the USB connection can not establish anything, something happens to the sound module and USB ...PC see's something, but it's not sure what it is, and says he can not establish connection with the new hardware and it gives me error "CODE 10". in Universal Serial Bus Controller and the Active Sync is instaled on my PC but he don't say a word about this connection...I don't know on what to do...! I must mention that this oddity occurred only three days go and without them I do something wrong ... He grabbed him crazy after a normal operation for a year and a half, because we had no problems with it until now ... I used as a GPS and the phone and I was really pleased with him. By the way, what they mean uspl 1.11.cmon? All data of my phone are in the first post.The phone it was once unlocked by someone else, and now I can use any SIM card from any GSM provider..............I forgot to say that I've rebooted 2 times in general mode and now works but without USB connection sound when he wants it or not................But I think she has lost some registry ...!!!
click 1.11.cmon in my signature.
this will divert you to a tutorial thread.
when you can connect your device to your pc successfully, you should do the uspl 1.11.cmon but not for now. do not try and flash a rom yet either, you will break your device. (thats what uspl 1.11.cmon is for)
id like you to just try the "hard reset".
back up all your data first.
bookmark the page as ill be updating it regularly.
personaly i think its your usb cable, eg:
one of my cables works with a micro sd reader but not my for my device, i understand your cable worked but now does not.. however thats what happened to me.
Sound engages when he wants and where he wants. If I restart the phone, sound disappears and microphone stop; and I can not talking on the phone. Enter data cable from PC to phone, and give the phone restart. Once the phone is starts, sound appear but only in back. When talking on the phone sound very loud and sounds of the touchscreen controls can not disconnect the rear speaker who remains engaged and does not want to disengage it from the normal operating mode. Another job here would be that when inserted in the charger cable, the sound is right: each speaker and microphone or operational. If I remove the plug (charger) of phone then the phone function normally just like before, but without USB connection. If I plug "USB cable data" on the phone, to the desktop I see message "One of the USB devices attached to this computer has malfunctioned, and Windows does Not Recognize it. USB Device not recognized." If I unplug USB cable from phone the sound disappears, and what I have to do is to start over again.......!!!!!!!!!
I tested all data cables, and are ok. The problem is hard. The hardware has a technical failure which somehow blocks the data on USB. Battery power consumption is higher and the battery is discharged rather quickly than it was before the cage. At night when I charge the battery full, morning at 10:00 is only 30/40% of capacity. But what is even stranger is that: when I connect phone to PC, in device manager shows me the new hardware (Mobile Device) but after a few seconds there appear a connection error code (CODE 10) that is the hardware can not start. Active sync has not started when the fault occurred..... In your opinion what should be done in this case? ... Should contact a service or ... in any way I can test something before others get the screwdriver into my phone?
sabih00 said:
hi guys,
i have searched the forums for wm 6.5 ROM, but lots of them are still in beta phase,have bugs or slow.
can anyone give link to a stable WM 6.5 ROM for my xda orbit
Thanks in advance
Click to expand...
Click to collapse
Thanks, i will test...
The connection was made the first attempt. After a week of "digging" through all possible places I noticed that the connection was obstructed by the firewall.PFFFFFFFF ..... Finally found! The FIRE WALL(on PC) settings to be set: ADD PORT------ "Outbound UDP ----5679" -on exceptions tab....See this:http://www.microsoft.com/windowsphone/en-us/howto/wp6/sync/activesync-troubleshooting.aspx?WT.mc_id=FWLink
TKX Raving U're the best...
...
Adryum said:
PFFFFFFFF .....FIRE WALL
Click to expand...
Click to collapse
lol, i didnt think about the fire wall being the problem.. typical that it was something that simple.lol although it did sound like a dodgy usb cable..
thats something ill remember
have a good new year dude!
guys i am having a problem....whenever i try to install any ROM i get error 224 device not responding......my htc is connected through activesync.....what can be the issue...i am using windows 7.
..
raving_nanza said:
ERROR [224] : DEVICE NOT RESPONDING
check the ActiveSync connection and run RUU again. if problem continues, uninstall active sync and re-install.
Click to expand...
Click to collapse
1. unplug device
2. re-connect device to pc
3. wait for active sync/wmdc to connect
4. run ruu
5. if error continues unplug device
6. uninstall active sync/wmdc
7. re-install active sync/wmdc
8. restart pc
9. go to step 1.
Rn
quertz?
Hi raving nanza,
you did a great work with BAB v03.
It works great. sometime the touchpanel reacts slow but good.
But i can't change my touch keyboard from qwerty into qwertz.
HKEY_LOKAL_MACHINE\System\CurrentControlSet\Control\Keyboard Layout\"Active" is "00000407"
Thats the German code - but still having Qwerty?
HKEY_LOKAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\"TaskManVKey" is "0x23"
HKEY_CURRENT_USER\keyboard layout\Preload\1\"default" is "000000407"
What to do?
...
che.bike said:
Hi raving nanza,
you did a great work with BAB v03.
It works great. sometime the touchpanel reacts slow but good.
Click to expand...
Click to collapse
thats Babbeluts rom, not mine!
i merely suggest it to the other users
ill look into your qwerty to qwertz keyboard, when i find out ill post it here and ill update the tips&tricks thread
Rn
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
have you tried put yoy're phone in depurating mode?
I guess yo mean Debugging mode, as I couldn't found Depurating anywhere. Have selected it and the same effect
HI
I had the same problem after getting nowhere with it, for some reason and I don"t know why, I put it in download mode and then connected it to odin and my PC found it I then disconected it and its been fine eversince.
Jim
#Samsung Kies always makes problems on Windows x64 !
##I would recommend, if you got 32-Bit Computer, to use that ;-)
#If you Want just flash over Odin, then is this driver package enough
##[Link]--http://download2us.softpedia.com/dl/85b009d47a0940e89eee2297a531d100/4f577870/300141878/drivers/mobile/SAMSUNG_USB_Driver_for_Mobile_Phones_1.4.8.0.exe
#The Package is also enough for If you want just to connect to mass Storage (Phone's SD Card)
Don't Forget to Thanks, if it was useful for you!
_______________________________________________
Hi there.
By direct connection you mean the USB Mass Storage mode, right?
It might be some weird, random problem with the samsung system drivers. I used to have such problems about two years ago, back in the days of Froyo. Have you tried re-installing them? There was a link to proper drivers file in one ICS installation tutorial, and those drivers can be downloaded here. If you go about trying this method, lemme know if it worked.
Cheers.
PS: Unlike diklooc there suggested, do not never EVER go back to x86 OS. That's the worst advice. Kapisch?
Did you check your usb port in System ?
Sometimes it stuck with another lastest device
Hi,
have tried everything, and finally only in a WinXP32 could be abble to get the error shown on the file atached.
But nothing (warnings) come up in Device Manager
Unninstalled everything (kies) and tried to install only the driver and nothing happens.
Should I try to mount it on a linux?
or is it dead?
thanks
i have this problem too
wat chan I do???
my sgs can not connect to my PC
This may help...
Hi there - I don't have the same phone as you, but I did encounter the exact same problem. I've been searching around and it looks like the most common fix was to simply replace the cable. I don't know what kind of cable you have, but my phone (a Samsung Focus i917) uses a mini-usb connector. I found that my Amazon Kindle used the same connector.
When I was using the Samsung cable, I'd get intermittent connects and charge power. The OS would report unknown device. When I switched computer's = same result. I switched to my Kindle cable and the computer instantly recognized the device and installed the drivers. After 12 hours of troubleshooting, factory resetting my phone (blah - lost everything) it turned out to be the cable. I know that this isn't an easy troubleshooting step for most people, because who has an extra cable? I just got lucky that my Kindle uses the same connector. I'm now suspecting (due to the prevalence of this connectivity problem coming from people with Samsung phones - there are a LOT of reported issues) that there is probably a Samsung cable problem in general.
Good luck with your phone.
try
try select mass strong ...
Tips and unlock advice.
nasdriver said:
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
Click to expand...
Click to collapse
Nasdriver, I currently have a similar problem but mine is related with Samsung Kies as I can't get either my older SGS1 or my newer Samsung Nexus to get recognized by Kies. I also suspected the cable thing and even read it could be a USB port issue but neither of them was my problem (I have 3 cables and 8 ports on 2 computers that result in the same thing). I can connect other devices with the same cables and they work, so I suspect my problem is focused around the Samsung device drivers.
My advice is if you can go in a systematic manner, first focus on the cable (easiest to replace), if you get the same results with a new cable, then focus on the USB physical port, clean it with some Isopropyl alcohol, if the port works for other devices (camera, other phones, etc..) on the same cable but not with the SGS, then try reinstalling the samsung device drivers.
Oh, and if you want to unlock your phone, the EASY way is to download the Galaxy S Unlock application from the Android market (no affiliation) it's free (but the developer does accept donations) and it WORKS. I won't bore you with my 3 week journey trying to unlock my Bell SGS phone here in Canada, had I found this app first I would have done it in less then 2 min saved myself a LOT of frustration.
Good luck