[Q] died g-Young - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

hello,
my g-young just recently dies, i dont know why, i cant even start it, cant even enter restore mode.
my g-young: rooted, CMWmod, i dont even change the ROM yet,
does uninstalling samsung chat via link2SD effect it?
thank you.
[UPDATE]
i can use my phone (normally), but only if i connect it to my laptop/charger. if i disconnect it, its just like there's no power in the batery.

jun2xweh said:
hello,
my g-young just recently dies, i dont know why, i cant even start it, cant even enter restore mode.
my g-young: rooted, CMWmod, i dont even change the ROM yet,
does uninstalling samsung chat via link2SD effect it?
thank you.
Click to expand...
Click to collapse
try first the DL MODE,, if so.....flash odin,,

kimerika said:
try first the DL MODE,, if so.....flash odin,,
Click to expand...
Click to collapse
but, odin cant recognize my phone :crying: :crying: :crying: :crying: :crying:

jun2xweh said:
but, odin cant recognize my phone :crying: :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
Instaal Samsung USB Drivers in the computer..
Rom:JellyBlast V3
Kernel:Kurotstogi
Theme:Xperia theme with some personal modification.

above post is correct,,
so if u can access to DLMODE maybe stock recovery also,,
try 1st stock recovery,,you no what im sayin dont you?

restore = recovery
he said he cant enter recovery....
Sent from my Nexus 4 using Tapatalk 2

go for odin and flash with fresh firmware...download the firm from sammobiles.com
do to dwnlad mod...vol down+home+power

[UPDATE]
if i connect my phone to laptop, the charging screen is on, i can start my phone (the time setting is back to jan 1 2011), but it dies again, then back to charging screen.
if i disconnect it from my laptop, the pho wont respond to any combination i try (DLmode and restore mode), and even if i connect my phone to my laptop, i still cant enter DLmode neither restore mode. :crying::crying::crying:

[UPDATE]
the good news is i can finally go to DLmode and odin can detect my phone,,
but, when i try to flash my phone, after a couple minute odin is not responding and there's messege:

jun2xweh said:
hello,
my g-young just recently dies, i dont know why, i cant even start it, cant even enter restore mode.
my g-young: rooted, CMWmod, i dont even change the ROM yet,
does uninstalling samsung chat via link2SD effect it?
thank you.
[UPDATE]
i can use my phone (normally), but only if i connect it to my laptop/charger. if i disconnect it, its just like there's no power in the batery.
Click to expand...
Click to collapse
u just got ans of your problem yourself...that means go get a new battery your battery is expiered lol
---------- Post added at 11:33 AM ---------- Previous post was at 11:31 AM ----------
jun2xweh said:
[UPDATE]
the good news is i can finally go to DLmode and odin can detect my phone,,
but, when i try to flash my phone, after a couple minute odin is not responding and there's messege:
Click to expand...
Click to collapse
i got it the pda file which u are using iscorrupt...download a fresh copy and try again.....

jun2xweh said:
[UPDATE]
the good news is i can finally go to DLmode and odin can detect my phone,,
but, when i try to flash my phone, after a couple minute odin is not responding and there's messege:
Click to expand...
Click to collapse
do not check repartiotion

hariskoirala said:
u just got ans of your problem yourself...that means go get a new battery your battery is expiered lol
---------- Post added at 11:33 AM ---------- Previous post was at 11:31 AM ----------
i got it the pda file which u are using iscorrupt...download a fresh copy and try again.....
Click to expand...
Click to collapse
ok, false alarm then. :silly:
when i checked its voltage, it shows olny 2.7V (its should be 3,7)
so i try to charge it with desktop charger, and VIOLA, its back!!!
hope its last for long, amen.
many many thank for you guys who respond to this newbs thread,,
sincerely thank you so much. :good::good::good::good:

jun2xweh said:
ok, false alarm then. :silly:
when i checked its voltage, it shows olny 2.7V (its should be 3,7)
so i try to charge it with desktop charger, and VIOLA, its back!!!
hope its last for long, amen.
many many thank for you guys who respond to this newbs thread,,
sincerely thank you so much. :good::good::good::good:
Click to expand...
Click to collapse
my pleasure pal...

Related

Well crap...I think I bricked it :-(

I tried to unroot my phone via OCLF from the market. It went dark, then got the normal Vibrant screen, the the Galaxy S screen, then it went dark again. Now, it just sits. Black screen. All the buttons at the bottom are lit up. :-/
Anyone?
Silly question, I know. But did you have a nandroid backup, by any chance?
This is probably a last resort, but try boot into recovery and wipe everything. This fix the problem for me, the downside is you lose all you data.
Sent from my SGH-T959 using XDA App
If you are anything like me, recovery didn't work and using Odin and reflashing Stock with repartition didn't work either.
You'll need to use odin to flash Eugenes "Vibrant that doesn't brick" (NO REPARTITION), then use odin again to flash Stock (check repartition this time) and you'll be good to go.
You can try to flash the froyo rom with odin...... I had that same exact problem and this is what fixed it for me. Once froyo us flashed then you can flash whatever rom you want. Hth
Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!
hospo said:
Ok, I probably should have stated that I'm a complete newby and have no idea what I'm doing. I believe I do have nandroid, but other than that you all are speaking French to me.
Right now I'm in the recover mode (I think). It's hooked up to my computer and I'm in the "Downloading... Do not turn off target!!" mode. This is where I'm stuck...I have no idea where to go from here.
Please talk to me like I'm a 5 year old, because as far as this is concerned, I am!
Oh, and thank you so much for any help you can give me!
Click to expand...
Click to collapse
Well, good news is... you didn't brick your phone, this is recoverable. Best idea would be to search the forums on how to ODIN back to Stock. Theres plenty of posts on how to do it. You should also be able to find this in the tips & tricks threads. Good Luck.
Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)
Kienz said:
Silly question, I know. But did you have a nandroid backup, by any chance?
Click to expand...
Click to collapse
Is it even possible to make a nandroid backup before rooting?
hospo said:
Thank you all for your help! I recovered it!! Seems as though I was just going about it the wrong way!! I got into the actual recovery mode and cleared it all out. Now it's as good as new!
Again, appreciate your help and patience with what I'm sure is the 120,000th post on this subject. ;-)
Click to expand...
Click to collapse
Hey - what does you doing? Please told me, I've the same problem:
If I start the phone with an USB cable and the battery symbol with the running point under this, the PC recognize that something is connected, but Windows found no driver....
How could you could flash the Stackfirmware back, if the recovery and download menu does not work ?
PLS help !!!
Check out this thread http://forum.xda-developers.com/newreply.php?do=newreply&p=8129898
Go to the section where it says "Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out."
And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works
And do fix #1 it is pretty easy and it wont take you more than 20 minutes.
Let us know if that works
Click to expand...
Click to collapse
If I following the link and the next one, I can read:
Caution!!! You Must be on STOCK Vibrant Rom & NEVER Have Already Flashed the JP3 Froyo Image
Click to expand...
Click to collapse
It isn't -> it's a Firmware for the normal Galaxy (3key)[I'm a idiot]
First,
You must already Have Odin installed & Know how to boot into Down-loader Mode!!
Click to expand...
Click to collapse
Thats also the problem as described in front : I have had no chance to received the DL Mode.. maybe I make something wrong? The phone is booting up till the "S" is there, after that, the screen is black, keys are lightning...
The recovery 3button are blocked from the beginning; the DL Menu - I did not have reached it successfully
The PC recognize, that is something on USB, but not what ... so Odin did not see the Mobile, too.

[Q] Flashing Firmware failed, Kies not working

Hello dear Forum Geeks
I Recently rooted my samsung s5, sm-g900f, and then deleted Applications whitout freezing them first to see if theyre unecessary.
My Menue Button didnt seem to work anymore. Anyway, thats the short story why i wanted to Flash the whole system whit the Stock firmware.
i downloaded the 1.5 giga Rom, it seems to fit my country and even my provider. G900FXXU1ANE2_G900FVFG1ANE1_G900FXXU1ANE2_HOME.tar.md5
i went into download mode and flashed the rom via odin, which went well until 99%, then a Fail! message appeard.
i removed the battery and tryed to turn the device on, now the message Firmware upgrade envountered an issue, please select recovery mode appears.
This sayd i followed the turtorial http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
and now iam on step 5, which is putting your S/N number into Kies so it can find your device. Unfortunately it doesnt accept my S/N number, i reaally dont have a clue why.
so, no firmware emergency available. It might be because i didnt use Kies from the beginning to flash the rom, or..... anyway i dont know what to do now. Please help!
Thanks in advance,
jan
Could you enter into Download mode?
Masum56k said:
Could you enter into Download mode?
Click to expand...
Click to collapse
it is not possible anymore. only the place where firmware upgrade encoutnered an issue please select recovery mode & try again appears.
Pull the battery.. Wait 5 sec..
Place battery..
And now first hold the Menu key & Volume --(down) button..
Keep holding them and now press the power button..
Try it once or twice or so many times, until you enter into download mode..
It should work..
Me also faced same problem before..
Masum56k said:
Pull the battery.. Wait 5 sec..
Place battery..
And now first hold the Menu key & Volume --(down) button..
Keep holding them and now press the power button..
Try it once or twice or so many times, until you enter into download mode..
It should work..
Me also faced same problem before..
Click to expand...
Click to collapse
okay iam in download mode, what next?
jan91 said:
okay iam in download mode, what next?
Click to expand...
Click to collapse
Congrats..
That means your device is okay..
Now tell me, did you used any Recovery? Like- Cwm /Twrp?
Masum56k said:
Congrats..
That means your device is okay..
Now tell me, did you used any Recovery? Like- Cwm /Twrp?
Click to expand...
Click to collapse
a shameful no.
jan91 said:
a shameful no.
Click to expand...
Click to collapse
No need to feel shame..
Now download Philz touch CWM for G900F..
Then flash it via Odin..
That should give your device's life back..
Try this. http://forum.xda-developers.com/showthread.php?t=2706253
Masum56k said:
No need to feel shame..
Now download Philz touch CWM for G900F..
Then flash it via Odin..
That should give your device's life back..
Try this. http://forum.xda-developers.com/showthread.php?t=2706253
Click to expand...
Click to collapse
i use this tutorial http://www.galaxys5update.com/insta...galaxy-s5-g900h-g900f-international-variants/
shall i also download thecf auto root zip, they tell me to do so there..?
jan91 said:
i use this tutorial http://www.galaxys5update.com/insta...galaxy-s5-g900h-g900f-international-variants/
shall i also download thecf auto root zip, they tell me to do so there..?
Click to expand...
Click to collapse
Nope.. You've already rooted your device. Right?
Then you don't need to CF auto root again..
Just flash the cwm..
Masum56k said:
Nope.. You've already rooted your device. Right?
Then you don't need to CF auto root again..
Just flash the cwm..
Click to expand...
Click to collapse
i dont know which file to use, some of them are only 1 kb small, the md5's which are shown to use in the tutorial
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/klte/ may you suggest one? if i choose the md5 there is an error message
jan91 said:
i dont know which file to use, some of them are only 1 kb small, the md5's which are shown to use in the tutorial
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/klte/ may you suggest one? if i choose the md5 there is an error message
Click to expand...
Click to collapse
That file size would be 9-10mb..
---------- Post added at 08:57 PM ---------- Previous post was at 08:53 PM ----------
Okay download the tar.md5 type file.
2nd one from last.
okay hihi i succeeded and my phone is running jiipa
\philz_touch_6.26.6-klte.tar.md5 used this file
jan91 said:
okay hihi i succeeded and my phone is running jiipa
\philz_touch_6.26.6-klte.tar.md5 used this file
Click to expand...
Click to collapse
Congratulation. [emoji106]

[Q] stuck in bootloader after messing with lcd density

hey guys, ive rooted my galaxy s5 and i messed with the lcd density of the phone.Ive done a reboot and then the phone got stuck in the bootloader showing only the samsung galaxy s5 logo. i dont know what to do. can anyone help me pls
also ive done a wipe data factory reset. I DONT KNOW WHAT TO DO. PLEASE HELP ME!!!! IM FREAKING OUT!!!!
Please guys, someone help me!!!!!!!!!!
didof993 said:
Please guys, someone help me!!!!!!!!!!
Click to expand...
Click to collapse
Reflash a stock rom with Odin, data factory reset afterwards and reroot again.
is there any guide in the forum that can help me to do this?
didof993 said:
is there any guide in the forum that can help me to do this?
Click to expand...
Click to collapse
Download the rom you need on sammobile.com/firmwares/2/ and here https://www.youtube.com/watch?v=j--RS0bx5c4 is a guide to use Odin 3.09. Download Odin 3.09 https://www.google.com/url?sa=t&rct...=NmzktT-NH8OzJXIuOXeylA&bvm=bv.74649129,d.ZWU.
i will do all these things but please if u can, stay with me online so u can help me cause im freaking out with this thing
didof993 said:
i will do all these things but please if u can, stay with me online so u can help me cause im freaking out with this thing
Click to expand...
Click to collapse
Oke,
- First download the rom and Odin
- Unpack the rom with 7-zip once
- Unzip and open Odin as administrator
- Enable usb debugging on your phone and turn off the phone
- Pull the battery, wait for 20 seconds and boot into downloadmode
- Place the unpacked rom (.md5.file) in AP section of Odin
- Connect the phone to the pc
- If you see IDCOM light up and show a COM number you are connected
- Uncheck Auto Reboot (upper right corner)
- Press start and flash
- After the flash pull the battery again, wait 20 seconds and boot in to recovery mode and data factory reset and wipe caches and boot up.
- Done
hope this fix my phone but i highly doubt it...
didof993 said:
hope this fix my phone but i highly doubt it...
Click to expand...
Click to collapse
Just follow the steps and all will be fine
weeeell, i cant do one of the steps that you said to me cause i cant open my phone so i cant enable usb debbuging but whatever, ill give it a shot
didof993 said:
weeeell, i cant do one of the steps that you said to me cause i cant open my phone so i cant enable usb debbuging but whatever, ill give it a shot
Click to expand...
Click to collapse
It will also work without usb debugging.
if this is true then im really happy , now i'll just wait for the md5 file to download and then ill start
didof993 said:
if this is true then im really happy , now i'll just wait for the md5 file to download and then ill start
Click to expand...
Click to collapse
Oke, i`am not here to brick devices but to help out users like you
im glad u say that but sammobile doesnt help at all. the chrome crashed twice while i was downloading the md5 file and now whenever i press the download button it says 502 bad gateway
didof993 said:
im glad u say that but sammobile doesnt help at all. the chrome crashed twice while i was downloading the md5 file and now whenever i press the download button it says 502 bad gateway
Click to expand...
Click to collapse
www.sammobile.com/firmwares/2/, just opened it in Chrome.
it says 502 bad gateway when i press the download button. i know that the sammobile site works fine. the download doesnt
didof993 said:
it says 502 bad gateway when i press the download button. i know that the sammobile site works fine. the download doesnt
Click to expand...
Click to collapse
Try this site http://samsung-updates.com/latest-firmware/, select your device and choose the correct rom.
well, i found the file but the page that i download it from has a download speed limitation and the download gonna last for about 10 hours.
So i'll go to sleep for now cause its already midnight ( here in greece ) and ill do this tomorrow morning.
Of course with all those things that happened i dont think that ill be able to sleep.
Im really stressed out. Whatever, ill try the steps that you told me to do and ill send you tomorrow the results.
Hope it get fixed. Goodnight
didof993 said:
well, i found the file but the page that i download it from has a download speed limitation and the download gonna last for about 10 hours.
So i'll go to sleep for now cause its already midnight ( here in greece ) and ill do this tomorrow morning.
Of course with all those things that happened i dont think that ill be able to sleep.
Im really stressed out. Whatever, ill try the steps that you told me to do and ill send you tomorrow the results.
Hope it get fixed. Goodnight
Click to expand...
Click to collapse
Good night and good luck bro

Touch screen not working after install CM12.1

Hello everybody:
I have problem with my phone (sm-g360h)
I firstly install the cm12.1 (the rom bulid from the source) then I wanted to reinstall the rom and install the CM12.1(ported rom) and the touch screen not working and back and also menu key not working and when I enter to recovery mode it take long time to enter
I try install stock rom by odin but the same problem
any one can help me?
Installing a ROM never breaks hardware, except you've installed it not properly (wrong installing method)
doesntexits said:
Installing a ROM never breaks hardware, except you've installed it not properly (wrong installing method)
Click to expand...
Click to collapse
I just install the rom you added in this thread
http://forum.xda-developers.com/galaxy-core-prime/development/rom-cyanogenmod-12-1-samsung-galaxy-t3405669
Did you follow the instructions carefully? I doubt it.
AtomR said:
Did you follow the instructions carefully? I doubt it.
Click to expand...
Click to collapse
yes ,but why back and menu key also not worke
Ah-pal said:
yes ,but why back and menu key also not worke
Click to expand...
Click to collapse
IDK. But...... Is CM12.1 booting or are you stuck on bootloop? Make the whole problem clear, then somebody can help.
doesntexits said:
Installing a ROM never breaks hardware, except you've installed it not properly (wrong installing method)
Click to expand...
Click to collapse
i too lost my touch screen! please help us fixingit
---------- Post added at 07:35 PM ---------- Previous post was at 07:32 PM ----------
AtomR said:
IDK. But...... Is CM12.1 booting or are you stuck on bootloop? Make the whole problem clear, then somebody can help.
Click to expand...
Click to collapse
actually i missed a file like properiety something which @doesntexists said to install! at first phone was soft bricked(on samsung screen display was going black slowly) after installing stock !touch is not working everything is working except touch ,home button and back including me! help me
AtomR said:
IDK. But...... Is CM12.1 booting or are you stuck on bootloop? Make the whole problem clear, then somebody can help.
Click to expand...
Click to collapse
CM12.1 booting but touch screen and soft keys not workig and the phone takes long time to boot or enter recovery mode
well I have face this error too and even I can't figure out what the problem is it so
only one way to solve this is to
give your phone to care centre .
Remember ( flash your phone with Odin and tick erase option then give your phone to care centre ) otherwise your Odin download mode say its on custom
good luck
Dreamstar said:
well I have face this error too and even I can't figure out what the problem is it so
only one way to solve this is to
give your phone to care centre .
Remember ( flash your phone with Odin and tick erase option then give your phone to care centre ) otherwise your Odin download mode say its on custom
good luck
Click to expand...
Click to collapse
No care center for samsung in country
Is the problem software or hardware?
that's happened to me too
i went to care center and they say that i need a new digitizer.
try to fix it i hope it will be back to normal mode

[Hard Problem] Not Showing anything but boot screen!?

Alright guys, i have never had any phone that i could not fix either hardware or software.
I bought this phone few years back on ebay from Korea for my dad its Note 3 SM-N900L and it used to work fine everything until my dad decided to take it on his holiday to India it suddenly stopped working there and since he doesn't know much about techs so he took it to the shop where he was told it is something they could not fix. Whilst speaking with him i told him don't worry just don't let them take the phone apart so bring it back and till then buy a temp phone which he did and he brought it back.
Now i have this phone and the problem is it boots show The first startup logo but after that nothing when you touch the screen it does give you haptic feedback and sound showing it works but it doesn't show anything at all!
I tried flashing old ROM didn't work.
I tried flashing custom rom didn't work
I tried flashing Korean Custom rom didn't work
I tried flashing different custom roms from various sources it didn't work
I tried Stock Roms Korean and Non-Korean yet they did not work!
As I didn't know what to do with this thought i'd ask help here see if we can get some help here please feel free to share your suggestion i am willing to take risk.
Kind regards
What about TWRP recovery does that work .
Odin where is it failing .
JJEgan said:
What about TWRP recovery does that work .
Odin where is it failing .
Click to expand...
Click to collapse
TWRP didn't flash any i think last time i tried gave me some problem so i choose to stick with the normal i'll try this if you want do you have any specific ones in mind please do let me know i'd gladly flash.
Odin did not fail, it goes through completely for the stock ROMS but the problem persist whilst the first Android boot logo is removed i can't seem to see the Samsung boot logo or anything after that.
I have no clue what is going on here, why its happening and whilst touch works and display works where does the problem lie?
JJEgan said:
What about TWRP recovery does that work .
Odin where is it failing .
Click to expand...
Click to collapse
I flashed ODIN it doesn't show any info it used to show download section in korean language now it doesn't even show that section anymore. after holding the enter download mode combinations i've to wait a second and by guesstimate have to press vol down button to enter download mode in order to flash anything...
Any other ideas please feel free to drop them.
Use a diffrent Odin version.
Try flashing stock firmware from sammobile.com using odin make sure the model matches the one you downloaded
Please read thread before posting .
OP says
I tried flashing old ROM didn't work.
I tried flashing custom rom didn't work
I tried flashing Korean Custom rom didn't work
I tried flashing different custom roms from various sources it didn't work
I tried Stock Roms Korean and Non-Korean yet they did not work!
JJEgan said:
Please read thread before posting .
OP says
I tried flashing old ROM didn't work.
I tried flashing custom rom didn't work
I tried flashing Korean Custom rom didn't work
I tried flashing different custom roms from various sources it didn't work
I tried Stock Roms Korean and Non-Korean yet they did not work!
Click to expand...
Click to collapse
Thanks for saving me hustle of replying to each
Am still waiting for the solution i have used different versions of Odin, firmware, laptops, computers, yet the problem persist!
Usb cable change
Try cold booting into Odin
Just power off your phone and unplug any cables
Then take out the battery and do not put it back plug the USB cable in and then just boot in Odin normally and flash stock rom
---------- Post added at 05:32 PM ---------- Previous post was at 05:27 PM ----------
If that didn't work either try flashing this http://www.mediafire.com/file/x4jlkvxdr3revzo/N900LKLU0GOC4_N900LKLU0GOC4_LUC_4files.zip
IMPORTANT put every file in the zip in the correct order in Odin it says in the name each partion it should be in
How with no power and no cables ??
PC cannot see usb connection and neither can Odin.
I'm sorry forget to say put cable back in I appoligize but do not put the battery in
Repeat No battery
Odin cannot see phone on ID com so it can flash nothing ever.
Tested failed twice as it cannot see anything to connect to .
If cable is plugged without battery it still can read and flash it is a cold boot look it up cause the PC is providing power instead of the battery
Sorry tested twice as you said.
Odin cannot see the dead phone.Odin flashed one second later shows fail .
Phone been out 7 years and this is the first mention of cold boot I have heard .likewise s1 2. 3 etc
YOU could of course provide evidence of this wonder method of cold boot as it would be very valuable to XDA Samsung users .
Gwgwy said:
Try cold booting into Odin
Just power off your phone and unplug any cables
Then take out the battery and do not put it back plug the USB cable in and then just boot in Odin normally and flash stock rom
---------- Post added at 05:32 PM ---------- Previous post was at 05:27 PM ----------
If that didn't work either try flashing this http://www.mediafire.com/file/x4jlkvxdr3revzo/N900LKLU0GOC4_N900LKLU0GOC4_LUC_4files.zip
IMPORTANT put every file in the zip in the correct order in Odin it says in the name each partion it should be in
Click to expand...
Click to collapse
Thanks dear i am right on it i'll report back in detail later i'll give this a proper try and try my best for it to work Thanks for your help in advance regardless whether it works or not
JJEgan said:
Usb cable change
Click to expand...
Click to collapse
I think i may have tried over 10 or so if i am not mistaken with laptops and computer changed too!
JJEgan said:
Sorry tested twice as you said.
Odin cannot see the dead phone.Odin flashed one second later shows fail .
Phone been out 7 years and this is the first mention of cold boot I have heard .likewise s1 2. 3 etc
YOU could of course provide evidence of this wonder method of cold boot as it would be very valuable to XDA Samsung users .
Click to expand...
Click to collapse
I tried flashing all those files in fact i had the very same files for repair and they did not work whereas, i am now not able to see the boot screen at all! now nothing shows just the notification is shown that's all...
Gwgwy said:
If cable is plugged without battery it still can read and flash it is a cold boot look it up cause the PC is providing power instead of the battery
Click to expand...
Click to collapse
I the so called COLD boot used to work not sure it didn't work on my Note 3 900L maybe something else might? I tried quite a lot but oh well didn't work!

Categories

Resources