hi everyone , i'm newbie , pls tell me about what is kernel? , i access website htc kernel , i see they don't support mytouch 4g anymore , i want to download new kernel for mytouch 4g , pls tell me where i can download , thanks so much , my english is not good
Kernels are very ROM type specific. We need to know what ROM you're on. Then we can help you.
i tested rom ViperTouch v1.0.1 | Sense 4.1 | 4.0.4 and yoshi 4.1, but i have a problem myscreen about 1-2 minute flash and go on ,i try fix but i can't , i don't know why and i think to up kernel , i don't know where download kernel mytouch 4g 4.1
If you're having the screen flickering problem, it is kernel related. However, it is across all of the kernels on this device. At least, as far as I know. Sorry
Use an old rom that uses 2.x kernel or switch to GB.
Sent from my Nexus 4 using Tapatalk 2
thanks everyone , i will try it
blue1231988 said:
thanks everyone , i will try it
Click to expand...
Click to collapse
I don't have screen flickering on CM 10.1 with the 3.0.57 kernel. You can try that if you want a newer version of Android.
Undiscovered said:
I don't have screen flickering on CM 10.1 with the 3.0.57 kernel. You can try that if you want a newer version of Android.
Click to expand...
Click to collapse
Some phones get flickering, some don't. Mine never did. Did yours flicker on other ROMs?
Undiscovered said:
I don't have screen flickering on CM 10.1 with the 3.0.57 kernel. You can try that if you want a newer version of Android.
Click to expand...
Click to collapse
i have screen flickering and camcorder problem on cm10.1 with 3.0.57 with mt4g. may be new kernel will fix this problem.
My never flicked with GB, but the moment I flash a ICS or JB, the flicker is on. Some said that it is in Sense framework and kernel, but I do not have Sense. With CM10 4.2.1 and .60 kernel, the flicker is on. Got to be patience. Some day, some one, will find solution.
Related
hello all i recently joined xda because i bought samsung galaxy 3. now as i have been looking for the rom threads in developement section i noticed that i cant post there so i read couple of rom threads and i was stunned. as i see there are 4 main rom makers, lastatious, kyrillos, apocalyps and greenmod. but when i first watched lastatious rom thread i saw that there are MANY problems in lastatious 1.8 also the same thing happened in apocalyps thread, people complain about the rom and they say it crashes/freezes a lot and some even say that they have flashed their phone with the same rom over and over again (like atleast 5times) and still they complain... but when i watched kyrillos and greenmod rom thread people said that they are almost bug free, even tough that greenmod rom is in beta it looks like its far more stable than apocalyps. and as i see it kyrillos rom is more stable than lastatious(and it isnt in beta) but most of the people will flash their rom with unstable lastatious or apocalyps... why? and if the rom wont work they will flash it again and again... why? why wont you use almost bug free roms instead of crashing/freezing rom? as i see it lastatious and apocalyps are the most downloaded and favorited roms but they are also very unstable roms... and this post was not a hate post to the great rom developers out there, i just dont get it... please reply to my post
p.s this was too big first post right?
Hmm... I don't know (about the unstable ROM flashing) p.s that was quite big post but it doesn't matter p.p.s yes you need 10 posts to post on Dec section
jazux said:
Hmm... I don't know (about the unstable ROM flashing) p.s that was quite big post but it doesn't matter p.p.s yes you need 10 posts to post on Dec section
Click to expand...
Click to collapse
dec? you mean dev? ok thanx for clearing that up
filumbro said:
dec? you mean dev? ok thanx for clearing that up
Click to expand...
Click to collapse
yeah i mean dev thanks for clearing that up
I myself do it to help the developer by testing his ROM and all of It's features, and then report results to the dev. Seeing as I've got very minimal skills or brain to contribute in the development I see it as the least I can do.
i tryed some. kyrillos did with every reboot a factory reset? i couldnt install apps and my phone got really hot i flashed it twice.. i tryed apocalypse but i got a softbrick when i rebooted my phone? I flashed back to indroid everytime becouse that one worked perfectly but when greenmods v1.0 is ill flash that one. it has 1% battery mod and it has neon theme that i like (sorry for my english)
Lestatious 1.7 worked bug-free.
Lestatious 1.8 has some minor issues with the kernel and Data2SD.
I'd still say Lestatious is the best ROM for me!
Sent From My 1.3GHz Galaxy 3 Lestatious V2 ACID (Build 1.8)
It's the urge to stay on the cutting edge and also the psychology of greener grass. I'm taking more of a backseat now as opposed the first few weeks of having the phone.
why flash unstable / beta ROMs? If you mean mindless flashing ('WOW, cool name, let's flash!!!') then I don't know
but if you want to help with development, testing, reporting bugs, contribute somehow, then it is perfectly justified
Apocalypse is in beta stage and of course it may have some bugs but will be fixed untill the final release.
Lestatious i think its a stable rom but v1.8 has an alpha version kernel which is not as stable as beta or final.
My rom has also an alpha version kernel with some freezes rarely.
I havent tried GreenMod but it seems that its nice rom
kyrillos13 said:
I havent tried GreenMod but it seems that its nice rom
Click to expand...
Click to collapse
thanx
Sent from my GT-I5800 using XDA App
I use Kyrillos because it's very fast and without A2SD+ I wouldn't have enough space for my apps...
And I also think that Kyrillos is mostly stable
kyrillos13 said:
Apocalypse is in beta stage and of course it may have some bugs but will be fixed untill the final release.
Lestatious i think its a stable rom but v1.8 has an alpha version kernel which is not as stable as beta or final.
My rom has also an alpha version kernel with some freezes rarely.
I havent tried GreenMod but it seems that its nice rom
Click to expand...
Click to collapse
I flashed your rom 4.1 directly from DDJP2 with the hope that the camera and the faceobook touch site would open. But still it has the camera bug. So i changed to Stock european version new release. XWJPF and i like it.
Though its has the camera bug and facebook touch site wont open. Do you have any solution for this???
DDJP6>DDJP2>Kyrillos 4.1>XWJPF
Will be waitng for your reply soon.
people flash unstable roms because they want to support the developer and test out some of the newer features of the rom. if nobody tests them, how are they gonna stamp out the bugs? unless you want to stick to the boring stock g3.
unstable as it is, its not like any real damage is done. whatever happens, you can just reflash it. no biggie
ayancold said:
I flashed your rom 4.1 directly from DDJP2 with the hope that the camera and the faceobook touch site would open. But still it has the camera bug. So i changed to Stock european version new release. XWJPF and i like it.
Though its has the camera bug and facebook touch site wont open. Do you have any solution for this???
DDJP6>DDJP2>Kyrillos 4.1>XWJPF
Will be waitng for your reply soon.
Click to expand...
Click to collapse
I think that you have a hardware problem with your camera. I had problem with it only on Apocalypse beta 3 OC. With any other rom camera working good.
Sent from my GT-I5800 using XDA Premium App
cop1976 said:
I think that you have a hardware problem with your camera. I had problem with it only on Apocalypse beta 3 OC. With any other rom camera working good.
Sent from my GT-I5800 using XDA Premium App
Click to expand...
Click to collapse
I dont think so because it was working perfect on my Stock eclair DDJG6. But after upgraing i am having this prblm. My camera is working perfect but if the location is enabled and if i dont have lock on my position my camera would force close if a click a photo. But if its turned off it works flawlessly. And in FROYO their isnt any option for turning off Geo-tagging.
Do you have any solution for this prblem..or a most stable ROM that doesnt have any prblm.
DDJG6>DDJP2>Kyrillos 4.1>XWJPF
I dont have a solution because like i said before for me camera working good on every froyo rom except apocalypse beta 3 oc.
Sent from my GT-I5800 using XDA Premium App
ayancold said:
I dont think so because it was working perfect on my Stock eclair DDJG6. But after upgraing i am having this prblm. My camera is working perfect but if the location is enabled and if i dont have lock on my position my camera would force close if a click a photo. But if its turned off it works flawlessly. And in FROYO their isnt any option for turning off Geo-tagging.
Do you have any solution for this prblem..or a most stable ROM that doesnt have any prblm.
DDJG6>DDJP2>Kyrillos 4.1>XWJPF
Click to expand...
Click to collapse
Did you try settings -> location & security -> uncheck "use wireless networks". GPS is also not necesarry.
kyrillos13 said:
Apocalypse is in beta stage and of course it may have some bugs but will be fixed untill the final release.
Lestatious i think its a stable rom but v1.8 has an alpha version kernel which is not as stable as beta or final.
My rom has also an alpha version kernel with some freezes rarely.
I havent tried GreenMod but it seems that its nice rom
Click to expand...
Click to collapse
hi
i think u got ur answers here
but i have been using kyrillos13 recent rom and its quite stable and good for me
i think its more what one wants if ur a basic user like me its ok. IF u are a heavy user that is u want LWP gps & blah blah then yes u would have many problems
and no matter how good the rom is overclocking is always gona give u the problem because the manufacture has a reason why he has made the phone for a certain speed we try to boost it very very high then their will be a problem
somewhere i read that a +10to 15% is ok but guys here boost it like double so ur bound to get problems
Well basically we all like to stay on the current situation...coz if u miss out on sumthing ull get thrown behind eons...so its better to stay updated here on xda!
Plus checking out alphas betas n oder stable ROMs is quite fun...u get a look of what oder smart-brained dev did to ur fone frm a piece of junk to a heavenly piece!...Happy Flashing!
Hi any one having trouble with launching apps on cm9 v2 for x8 i can't launch any at all not evan any stock cm9 apps. Ive got nAa kernal did full wipes and still won't work anyone else having the same trouble or have any solution. Im new here so can't post on the maine thread.
stock ICS apps work fine with me,
i have trouble with anTuTu
wilbso said:
stock ICS apps work fine with me,
i have trouble with anTuTu
Click to expand...
Click to collapse
Yeah , for me too , its just freezs :/
vanillaLVL said:
Yeah , for me too , its just freezs :/
Click to expand...
Click to collapse
Well, for me it:
Freezes then reboots my phone, so, looks like we gonna have to make changes, OR the dev pulls his act together and realises that his ap isnt compatible with a very popular ROM
LOL
try + oc
there is compatibility issue..
not all apps support ICS (for now)
even many of them not support official ICS..
app devs maybe on the progress go to that..
ex: 2weeks ago quick pic not support ICS.. a couple day ago,,quickpic rel a new version that support ICS..
maybe you have to be more patient
bout ur ics gapps not work,,try the newest gapps..
or maybe u have to increase ur proc OC.. ICS need more resources than gb..
that's happen to me first time i use cm9,,always not responding..
but now its all ok..
just gallery n maps that sometimes only show black (blank)..
:thumbup
Ok thsnks reflashed nee gapps just the music player dosent work
which is the stable ROM for defy+ for Daily usage....plz do rply
thanks in Advance
coolshahabaz said:
which is the stable ROM for defy+ for Daily usage....plz do rply
thanks in Advance
Click to expand...
Click to collapse
Didint test CM 9s myself , coz i jumped from Stock to 2ndboot immediately CM 10 Cyanogen, but from what i can read - mostly all 4.0.4 are stable now.
CM 10s are also stable enough, used all versions of Cyanogen by Quarx from 2013 - suggest , if you decide to go that way to start with 0409 ROM. It has pretty good battery management, and no WiFI dropouts..All in all good choice..And no ringtone bug too.
If you get no WiFI and or no mobile signal - check FIRST aeroplane mode - it tends to boot with it on.
Just turn it off - and all works.
Cheerz
raven34 said:
Didint test CM 9s myself , coz i jumped from Stock to 2ndboot immediately CM 10 Cyanogen, but from what i can read - mostly all 4.0.4 are stable now.
CM 10s are also stable enough, used all versions of Cyanogen by Quarx from 2013 - suggest , if you decide to go that way to start with 0409 ROM. It has pretty good battery management, and no WiFI dropouts..All in all good choice..And no ringtone bug too.
If you get no WiFI and or no mobile signal - check FIRST aeroplane mode - it tends to boot with it on.
Just turn it off - and all works.
Cheerz
Click to expand...
Click to collapse
thx buddy i've installed latest CM10 and running well too....
at the start i got wi-fi problem, wi-fi is not starting but after tweaking the baseband all started well....
now the thing is that I can not overclock my cell stcuk on 1GHz stcok frequency....
anyone here plz suggest me what should i do to get overclocked CPU...
FURTHER
is that franco kernel updater will able to update the kernel???
coolshahabaz said:
thx buddy i've installed latest CM10 and running well too....
at the start i got wi-fi problem, wi-fi is not starting but after tweaking the baseband all started well....
now the thing is that I can not overclock my cell stcuk on 1GHz stcok frequency....
anyone here plz suggest me what should i do to get overclocked CPU...
FURTHER
is that franco kernel updater will able to update the kernel???
Click to expand...
Click to collapse
Think that read here on forums that SetVsel won't work well with CM10s..and tends to crash the thing ...look it up, not sure about it where i read it. If ur using it - try with something else. Also , read about developers pages - they are doing something wtih 3+ kernel but still very experimental.. check Quarx pages ull find all kinds of it there.
wajkiui 3.1.27 (gb) seems very stable, more than any other rom i tried including stock. second best would be stock (imo)
gsd99mg1 said:
wajkiui 3.1.27 (gb) seems very stable, more than any other rom i tried including stock. second best would be stock (imo)
Click to expand...
Click to collapse
But, its based on 2.3.7 , isn't it? My guess was we are talking about CM10 4.1.2...All 4.0.4 are fully stable and thats CM9. Your talking about CM7 if im not mistaken, and that's way old. For that to put on defy plus - you can leave stock..
raven34 said:
But, its based on 2.3.7 , isn't it? My guess was we are talking about CM10 4.1.2...All 4.0.4 are fully stable and thats CM9. Your talking about CM7 if im not mistaken, and that's way old. For that to put on defy plus - you can leave stock..
Click to expand...
Click to collapse
cm9/10 seemed too slow to me. stock is somewhat better but nowhere near gb-based miui. and the subject thread does not mention cm10. to me, the improvements of cm10 in terms of features do not make up for the loss in speed.
Hi guys, i rooted my phone days ago and i decided to flash a custom ROM into it. I chose AOKP latest nightlies build but after flashing it i realise that the wifi is not working (take forever to turn on in grey color even after i rebooted for many times). I thought maybe the nightlies build is not stable so i changed to m2 but the same problem occurfed. I really need help please,.. Thanks alot for the considerations.
strife91 said:
Hi guys, i rooted my phone days ago and i decided to flash a custom ROM into it. I chose AOKP latest nightlies build but after flashing it i realise that the wifi is not working (take forever to turn on in grey color even after i rebooted for many times). I thought maybe the nightlies build is not stable so i changed to m2 but the same problem occurfed. I really need help please,.. Thanks alot for the considerations.
Click to expand...
Click to collapse
Try wiping cache, davilk cache and then data. If WiFi still don't work try reflashing ROM. If the issue still here, try flashing factory image and see if the WiFi is working. If it is working on stock ROM, install CM or Paranoid Android or SlimKat.
msihp said:
Try wiping cache, davilk cache and then data. If WiFi still don't work try reflashing ROM. If the issue still here, try flashing factory image and see if the WiFi is working. If it is working on stock ROM, install CM or Paranoid Android or SlimKat.
Click to expand...
Click to collapse
Thanks for the reply. i tried reflashing rom but the pproblem is still there. The WIFI work perfectly in stock ROM.. Anyway, any Nice ROM have similar customization as AOKP recommended?
Restore your Nandroid backup, it would definitely solve the problem.
Btw what device are you on?
Sent from my GT-I9082 using XDA Premium 4 mobile app
Well, you can customize every ROM with Xposed which is now out for Android 4.4. I'd recommend you SlimKat but to be honest it dosen't have many features due to early Alpha stage of KitKat but they are coming in every update!
If you've gone from 4.3 to a 4.4 rom, you may need to flash the latest radio to have WiFi working.
agrawalshlok96 said:
Restore your Nandroid backup, it would definitely solve the problem.
Btw what device are you on?
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Im using N4.. i did restore my stock ROM and it work perfectly ff that's what u mean by nandroid backup..
could be kernel issue. Try flashing stock kernel.
meangreenie said:
If you've gone from 4.3 to a 4.4 rom, you may need to flash the latest radio to have WiFi working.
Click to expand...
Click to collapse
I' staying at 4.3.x
badboy47 said:
could be kernel issue. Try flashing stock kernel.
Click to expand...
Click to collapse
II guess it's kernel problem.. I try to flash franco.Kernel.Plus-r193-1110-JSS-CAF but the phone wont start at all...
If you insist on staying on 4.3.1, i would like to suggest the below rom:
AOKPK by kecinzer
Thread:
http://forum.xda-developers.com/showthread.php?t=2491689
Download this version:
aokpk_mako_jb-mr2_daily_1310271731
http://goo.im/devs/kecinzer/aokpk/mako
It comes with forked of franco.Kernel JWR version with new prima drivers (faster wifi speed, better battery life). Its a great rom with lots of features.
You need to change baseband to something like .33. Look on xda and you will find it.
Sent from my Nexus 4 using xda app-developers app
wcn said:
If you insist on staying on 4.3.1, i would like to suggest the below rom:
AOKPK by kecinzer
Thread:
http://forum.xda-developers.com/showthread.php?t=2491689
Download this version:
aokpk_mako_jb-mr2_daily_1310271731
http://goo.im/devs/kecinzer/aokpk/mako
It comes with forked of franco.Kernel JWR version with new prima drivers (faster wifi speed, better battery life). Its a great rom with lots of features.
Click to expand...
Click to collapse
Thanks for the suggestion What if i wanted to move to 4.4? Any good suggestion?
Hello, you have to flash older radio to enable wifi. Try version 84. Just flash the zip from CWM.
http://forum.xda-developers.com/show....php?t=2087227
strife91 said:
Hi guys, i rooted my phone days ago and i decided to flash a custom ROM into it. I chose AOKP latest nightlies build but after flashing it i realise that the wifi is not working (take forever to turn on in grey color even after i rebooted for many times). I thought maybe the nightlies build is not stable so i changed to m2 but the same problem occurfed. I really need help please,.. Thanks alot for the considerations.
Click to expand...
Click to collapse
I‘ve met problems similar to you using AOKP, I've solved it by flashing another stable AOKP rom.
i had my nexus on 4.4 rooted, when i use a rom based on 4.3 wifi, bluetooth and sounds doesnt work, when i flash a rom based on 4.4 (omni, crdroid) everything work just fine... could it be a RADIO problem??? where i can find the older radio since the link in here doesnt work?
Thank you
strife91 said:
Thanks for the suggestion What if i wanted to move to 4.4? Any good suggestion?
Click to expand...
Click to collapse
Well, everyone has their own preferences. There are many great 4.4 roms out there. I could not suggest something that I've had never used before. I've tried a few roms and only the below stayed on my phone:
Multiboot:
•Cataclysm-Nov-25 - by atlantis
•Project KitKat v2.1 - by gnome
Kernel:
•hells-Core-b42 (kexec-harboot patched)
•AK.207.KK
Give yourself chances to try some other rom. There is nothing to loose. Nandroid backup your existing rom. If you don't like the new rom, restore from Nandroid. You'll then determine which rom suits you best.
i found out the solution is very simple....
if you use a 4.4 based rom.... flash the radio version 97
if you use a 4.3 based rom.... flash the radio version 84
thats it
Hi guys, happy new year!
So, i'm testing the rom "Nexus 5 Experience (Kitkat 4.4.2)" and everything seems ok, i'm testing the version CAF Kernel. now i'm tryin install new kernels on this rom, but at every kernel I install i get the same error, after instal any kernel, I turn on my N4 and the screen seems very strange, colors flashing, sometimes when i start a game (or anything that forces the gpu) the screen is filled by one or two colors, but the touch is still working, is just a screen or gpu (i dont know) error.
I tryed to take some printscreens, but when i will check this on my pc, everything is ok, like if theres no error.
When i flash the rom again, everything works normally.
what i'm doing wrong ? I thought to change kernel is only flash him, is it wrong ?
i'm newbie, got my n4 yesterday but i have some experience in my old xperia..
sorry the bad english, im br
Thanks guys!!
Are you installing CM compatible kernels?
Try the AK kernel CM version
http://ak.hiddenbytes.org/old/cm//AK.309.CM11P.zip
goofball2k said:
Are you installing CM compatible kernels?
Try the AK kernel CM version
Click to expand...
Click to collapse
heyy, this worked!
but i don't understand, i tryed this and a lot of kernels before (all compatible with CM) and doesnt work
so.. thanks! i will check this, recommend me another kernel ?
thanks again! cheers
mendes1995 said:
heyy, this worked!
but i don't understand, i tryed this and a lot of kernels before (all compatible with CM) and doesnt work
so.. thanks! i will check this, recommend me another kernel ?
thanks again! cheers
Click to expand...
Click to collapse
I can't say what you did wrong, maybe you got the wrong version since many make 2 versions of their kernel, one for AOSP and one for CM.
I don't run CM ROM's so I don't know which kernels are out there. HellsCore is also another kernel to consider, I believe there are CM versions of it as well.
goofball2k said:
I can't say what you did wrong, maybe you got the wrong version since many make 2 versions of their kernel, one for AOSP and one for CM.
I don't run CM ROM's so I don't know which kernels are out there. HellsCore is also another kernel to consider, I believe there are CM versions of it as well.
Click to expand...
Click to collapse
yes, i'll try HellsCore.
thanks for the help, i appreciate it!