Related
HELP!!
My Sprint Galaxy tab seems to be soft bricked. I tried to install the CWM recovery using the bootstrap method and then rebooting into recovery, factory reset/data wipe, and cache wipe, then rebooting. Got stuck at samsung logo and the directions of the thread said to just hold power and volume up and that will reboot into recovery so the file convertion could continue, but its SCREWED! And the worst part is that I am on vacation and I use my tab for everything. I was planning on using all this trip and I only have a mac, not a PC so Odin is out. If someone could please help and get me back up and running I would really appreciate it. Like I said all the resources at my disposal are a macbook pro and a HTC Inspire 4g. TIA
do you have an sdcard installed? Yours is doing what mine did, and then i inserted the sdcard and it started working. basically, if you dont. the phone is trying to find it so it can convert it to ext 4 and just loops.
laxwillsch said:
...Got stuck at samsung logo and the directions of the thread said to just hold power and volume up and that will reboot into recovery so the file convertion could continue, but its SCREWED!
Click to expand...
Click to collapse
Actually the instructions are to power off the device, then hold vol up and power. This may be what you were trying to say, but if you indeed tried to do it exactly as you said then it would simply power off the device.
Yes that is what I was trying to say, I held volume up and power till the samsung logo came on
And mine had an sd card in the device, do you think it is worth it to take it out and put it back in? I am willing to try anything at this point. I really just want to get it back up and running, I bought it outright and don't use the sprint network, and I use my phone for gps so I don't need either of those. Just want to know how to flash back to stock, want to use it for an ereader and to watch movies.
Sent from my Desire HD using XDA App
How far into the CwM process did it get? Did you ever make it into CwM Recovery? If not, then the issue was with the kernel/recovery flash and that should be all you need to fix.
You have a few options for doing this if you can still get to DL mode (vol down and power to boot), the easiest being Heimdall GUI or Odin. You already said Odin is out due to your current situation, so how about Heimdall? I am not sure where to get a stock kernel/recovery for Sprint, but the KhasMek Voodoo Kernel with Recovery is working for Sprint users, but perhaps with some limitations that are outlined in the thread later on. Check out the Heimdall instructions in the OP to see what you need to do if you can use Heimdall. The same instructions should apply if you can find a reliable stock kernel/recovery zImage for the Sprint tab.
beestee said:
How far into the CwM process did it get? Did you ever make it into CwM Recovery? If not, then the issue was with the kernel/recovery flash and that should be all you need to fix.
You have a few options for doing this if you can still get to DL mode (vol down and power to boot), the easiest being Heimdall GUI or Odin. You already said Odin is out due to your current situation, so how about Heimdall? I am not sure where to get a stock kernel/recovery for Sprint, but the KhasMek Voodoo Kernel with Recovery is working for Sprint users, but perhaps with some limitations that are outlined in the thread later on. Check out the Heimdall instructions in the OP to see what you need to do if you can use Heimdall. The same instructions should apply if you can find a reliable stock kernel/recovery zImage for the Sprint tab.
Click to expand...
Click to collapse
Ok Thanks I just downloaded Heimdall and am going to give it a shot, what do I have to lose. If all else fails I can just wait till I get home where I have a PC with odin and I can just flash the almost stock rom that is floating around. If I successfully flash the zimage from the kernel thread will that just replace the current kernel that may be causing the issues?
Well I think I am screwed. Heimdall failed with a failure to get a response from device error and now all I have is the phone ! pc graphic. I really dont know what to do now. I think I am going to be screwed I dont know how to get out of this. No more download mode no recovery mode. NOTHING!
PLEASE ANYONE OUT THERE!!! I REALLY NEED SOME HELP WITH THIS!! I eard that if the battery goes dead while your at phone ! pc your screwed and have to tear it down. And because I dont have a windows computer I cant use the odin method just yet.
Well not that anyone cares because of the lack of activity on this thread, but I thought I would post what fixed it just in case someone else has this problem. I downloaded a stock Sprint Rom, that actually came with a modem that works I think (I don't use sprint service but my baseband is there) and with working GPS. I found it on this forum somewhere it was called Sprint_D30_Tab or something. I went and borrowed a windows 7 pc from a neighbor, plugged my tab in when it was in Phone ! Pc mode, let it download the drivers, then loaded odin up with no PIT no Repartition, and did the CSC and PDA slots, then let it run. It took alot longer than any odin did on my captivate but it worked. I have a fully functional Tab again!
Thats good news! The cwm bootstrapper sure seems volatile for some, likely why it has never left beta status. I would recommend avoiding it, and if you get the itch to install recovery again I would go straight for KhasMek kernel until a better solution for CDMA tabs comes around, if ever.
find one windows pc and flash the pit with rerepartition, dont know if it gona boot your tab but a least alow you to acces to the download mode! pm if you need the file.
HOW TO UN-BRICK YOUR FASCINATE NOW THAT YOU HAVE BRICKED IT
SINCE IT HAS COME TO MY ATTENTION SOME POEPLE ARE CONFUSED ABOUT WHAT PHONE THIS IS FOR, I WILL MAKE IT AS CLEAR AS POSSIBLE
THIS IS FOR THE VERIZON FASCINATE
So you think you bricked your phone? The first thing you need to do is CALM DOWN, NO NEED TO PANIC , the odds are great that following this guide will fix your mistakes and recover your phone.
Sorry Fascinate owners, but I can no longer support this thread. As state below I test everything I post to make sure it works as advertised. I no longer have a fascinate so i can not test anything new. Sorry but the links to some of the files are gone I don't have them anymore so I suggest you look through the comments someone will have someplace to get what you need. Your recovery methods may have changed but this can still be used to recover your device. If you are looking for anything new look at nitsuj17's roll up post here, he maintains it very well so you should be able to find whatever else you need there.
I HAVE PURPOSELY BRICKED MY PHONE BY DOING THE THINGS YOU ARE TOLD NOT TO JUST TO TEST THE CAPABILITIES OF THESE RECOVERY PROGRAMS. UNLESS YOU CAN AFFORD TO HAVE YOUR PHONE REPLACED BY INSURANCE, TRUST THAT I KNOW WHAT I AM TALKING ABOUT.
SECTION 1: ODIN
SECTION 2: HEIMDALL
SECTION 3: ROOTING METHODS
Since there seems to be an abundance of posts in the Q&A and General Forums asking for help fixing, unbricking, their Fascinates, I decided to try to make a one stop walk through for odin and heimdall with links. Most of us "flash addicts", Developers, and testers have found the Samsung Galaxy Phones are nearly impossible to truly brick without causing physical damage to your phone, in almost all cases it is possible to get it working again.This is nothing more than how to get back a working STOCK phone, nothing custom here that's in the Development section. The first section will cover odin, the second heimdall, the third recovery and rooting.
USUAL WARNING: Everything here is done at your own risk. None of us on the XDA Developers site are responsible in any way, after all we didn't brick it you did. Doing any of this is your decision, I am just providing a collection of information. All credit for everything here belongs to others, who worked hard to give you a way to fix your mistakes, and it usually is the owner of the device trying something without learning how first, or not following directions that got you here in the first place.
My Phone wont boot at all, is stuck at logo, or I cant do anything with it is it a paperweight?
Most likely, no, so lets get to fixing it. All download links necessary for each process will be posted in this walk through and have been tested to make sure they work.
SECTION 1: ODIN
Everything except for the pit file in odin MUST be done in the PDA slot, if not it will not work requiring you to odin again, or possibly have to use heimdall (covered later in this thread) to fix that. After you download odin, I use v1.83 but I will provide all versions I have.
First you need to decide if you want to go all the way back to DI01 (Android 2.1 "Eclair") or EB01, EC01, or a little more involved process for ED01, or ED03 (android 2.2 "Froyo") it makes all the difference with the files you need. The pit file is not necessary for most recoveries, but I have included due to a few issues that will require you to completely wipe everything but your SD card and start over. All of this is possible thanks to our talented developers. After you have odin and all the files you need on your Windows Vista or Win 7 PC, This DOES NOT work on XP, I have had a lot of responses to support this, so lets go with it won't work use Vista or Win 7. To load any file you click that button and use the windows explorer pop up to find your file select it and click open at the bottom of the window.
Start by powering off phone, the pull out battery.
Open odin and load your file in PDA and ONLY THE PDA (downloads) section, If you knew enough about this program to use the other areas you would not need this walk through, soPDA and ONLY THE PDA (downloads) section, for an, all in 1 Recovery. If you are doing a non packaged update I suggest installing the rom one first, modems and recoveries are a lot faster install.
If you are repartitioning put the pit file in the (Pit) section,verify repartition is checked.
Plug your phone into a USB slot, then hold the volume down hard key on the side of the phone. You should see a yellow triangle with a construction droid on your phones screen, and a box on the left right above options (ID:COM) is now yellow.
Now you are in download mode, verify check box next to PDA is checked and the block has the file location in it. Make sure Repartition (unless you are repartitioning and have the pit file in place), Dump, Phone EFS clear, and Bootloader, Phone Bootloader Update, and Flash Lock are NOT CHECKED in the Options section. Auto Reboot and F. Reset Time can be checked or not it doesn't really matter with the battery out. These are the default settings in the options section but double check it anyway.
You are ready to go, click start, and let odin run, it can take anywhere from just a minute to around a half hour. If anything happens like your computer shuts off, you accidentally unplug your phone from your PC, or download failed. Don't freak, just do it again from step one, sometimes it takes multiple attempts to get it. I think at six failed attempts in a row it may be time to look into heimdall, the walk through for that is below this one.
Once odin finishes and does its test you will get a green box lit up that says Pass in it just above where you saw the yellow box showing you were connected. Congratulations on a successful recovery. reinstall your battery and the back cover, reboot your phone and wait for it to boot up. The boot process can take several minutes so be patient. If the boot was successful you should be looking at a stock bloated Verizon Fascinate, that is asking you to back up your system and log into Gmail.
Fascinate USB driver from Samsung, just in case you need it.
Sch-i500 USB driver
odin v1.3
odin v1.7
odin v1.83
Atlas v2.2 Pit file
DI01All in 1
EB01All in 1
ODIN CWM ED01 Stock ROM/Kernel/Recovery Courtesy of Imnuts
ODIN ED03 ROM/Kernel/Recovery Courtesy of Imnuts
MODEM ODIN CWM DL09, EA28, ED01, ED03 modems without ridiculous 100MB OTAs Courtesy of Comradesven (I can now say this works and is easy to do just folloy the instrictions on thread.) Decided to try out this method after bricking my phone again, EASY AND FAST, love it.
EC09 Gingerbread Leak CAUTION:It has not happened to me yet even after several times of flashing something custom and using this to odin back to stock with, but there are many reports of this corrupting users SD cards. This is a leak and as always USE THIS AT YOUR OWN RISK!!
Here are the ONLY TWO, as far as we know guaranteed to get you fixed up, odin files, for anyone coming from CM7 or MUI MTD for the Fascinate.
YOU MUST USE THE ATLAS V2.2 PIT FILE, ONE OF THESE FILES, AND REPARTITION. IF YOU DON'T ODIN WILL FAIL TO COMPLETE THE RECOVERY.
CI500_VZW_DL09_ECLAIR
CI500_VZW_EB01_FROYO
SECTION 2: HEIMDALL
Now for the heimdall walk through, so follow along. I don't think it is possible to completely brick this phone short of actually smashing it, why take unnecessary chances.
First go to the link for heimdall. Download, unzip this and open the folder. In this folder you will find another folder labeled Drivers, open it and you will see a program called zadig.
Now put your Phone into download mode, that is remove the back cover, take out the battery and plug it into your PC with the OEM cable (the one that came with the phone when you got it), then press and hold the down volume button till a yellow triangle and construction droid , now you are in download mode.
Double click zadig and when it opens, click on options and click list all devices. Now drop the usb drop down box and you will find an option for SAMSUNG android composite ADB device, or Samsung composite usb driver, select it then click install drivers. the usual install stuff from windows about do you want to install this, yes you do. Now If the warning about publisher could not be verified, whatever, install it anyway, no it's not a virus. Your phone MUST be in download mode or zadig will not have the USB you need as an available option.
Now you need the files for this program to install and recover your phone. I was motivated to set up a zip file for download with files ready due to confusion on how to accomplish this step, you will find links below.
Now back into the heimdall file you opened earlier you will need to double click the heimdall.exe file, and click run on the windows pop up, it will show a cmd prompt type screen then disappear shortly after, it's supposed to do that.
Again in the click the application called heimdall-frontend. here is where you can go wrong so I will do this side by side with heimdall names and DI01/EB01 file names. I don't believe there are currently any other full recoveries.
To eliminate confusion on where to put your files follow the guige below.
Heimdall on this side of =Recovery file names on this side.
In Repartition:
PIT = atlas_v2.2.pit see below.
In PDA/Code:
FactoryFS=factoryfs.frs
Kernel(zImage)=zImage
Param.lfs=param.lfs
Primary Bootloader=boot.bin
Secondary Bootloader=slb.bin
In CSC:
Cache=cache.rfs
Database Data=dbdata.rfs
In Other:
Modem=modem.bin
Recovery=recovery.bin
Now that all the are files loaded into the correct spots, the necessary drivers installed, and phone in download mode, the start button will be able to be clicked, not shaded outlines like before, did you even notice that? If you followed everything in this tutorial step by step, click the START button and let heimdall run. After it finishes reboot your Verizon stock, Bing bloated, WORKING Fascinate. After this is completed successfully you will be able to use odin again if you need or want to.
Heimdall
DI01 heimdall package
EB01 heimdall package
Why did this happen?
Why was this necessary, as far as I can find out, through research, I wont even try to figure out how many times I had to odin ,and the eight, yes that's right I said 8, times I have HAD to use heimdall, because my phone would not recover through odin. Usually because like me you flashed a rom on for a different phone or, it seems to be, dbdata or another partition can not mount. This has happened to me because I didn't remove voodoo, or flashed a pre edify rom after accidently putting cwr3, which is for edify, on a non edify rom. So moral of the story is twofold, yes it is very likely it can be fixed, and remove voodoo before going to nonvoodoo, and make sure you have a version of cwr that supports both ammend and edify script if you are not sure. Don't flash a rom for a different phone on your Verizon Fascinate or you most likely WILL need heimdall.
NEVER USE A FILE, ROM, KERNEL, ANYTHING, THAT IS NOT CLEARLY FOR THE VERIZON FASCINATE.
Remember, thank the developers by clicking the thanks button on threads you find helpful, they did the work. All I did was take some time and put together all the links and processes I have read and had to learn. Some of the walk through threads are well written by the Dev's and some were hard for me to follow. Sometime I wonder if our Dev's forget that us mere mortals have no idea what they are talking about, and I pride myself on being much better than average with computers and software. That said if you have trouble working e mail and office, I think it's fair to say you would be lost. I hope this is easy to follow and always successful for you. Better yet I hope you never need this.
READ:If heimdall, or odin fail, but you can still get into download mode, do it again, and keep trying while you look for further assistance on this site. If you can't get into download mode with your phone plugged into your PC, unplug usb from PC and plug it into the wall outlet, and try to put it into download mode there. When It goes into download mode, unplug usb from adapter, plug it into PC and put it into download mode, This does work.
If this has Helped you not have a $600 dollar paperweight, consider donating to some of our Dev's working so hard to not only give you better than what big red and sammy gave you, but also a way to fix your mistakes without the need for an insurance claim. Isn't it worth a few bucks to support the developers who save you from the insurance deductable? Think about that before you complain about the devs.
SECTION 3: ROOTING METHODS
Here are two easy ways to accomplish rooting your phone.
ROOTING YOUR PHONE VOIDS YOUR WARRANTY. I NOR ANYONE ELSE WILL BE RESPONSIBLE FOR ANYTHING YOU CHOOSE TO DO. NO ONE HERE IS MAKING YOU DO ANYTHING, JUST PROVIDING INFORMATION ON WAYS TO ACCOMPLISH WHAT YOU WANT TO DO.
Super One Click method: unzip file, open file, double click ADB, it will show a quick cmd like window. Now make sure you phone has USB debugging enabled, connect to PC, don't mount USB. Click the SuperOneClick.exe icon and let it run. If it fails run it again, sometimes it does that. If anything pops up on the screen, read and answer. Unless you are using a Captivate leave the Captivate tab alone it is for getting an unlock code and you don't need that for your Fascinate. (works on all fascinate stock OS to include ED03, and EC09 GB, tested by me.)
CWR & SU Method: (DOES NOT WORK ON 2.2.1) Put superuser.zip zip file on root of SD card, odin in cwr, boot phone into recovery by holding power and volume at same time. To do this simply install battery after unpluging from PC press and hold power and volume buttons at the same time. DO NOT let the phone boot as far as the Samsung logo or you will have to odin in cwr again. Go to Install zip, choose zip, install from SD card. Find your superuser.zip file and install it. Reboot, you are rooted, install busybox, free from market if necessary. If you need odin or instruction on using it, see section 1.
GINGERBREAK Method: Gingerbreak v1.20.apk is an easy to do method, put the apk on your sd card, install from file manager, run it.
KEEPING CWR3 IN 2.2.1: To keep CWR on any ED OTA release you need to make some adjustments to a few files. Don't worry I am going to tell you which ones, and I suggest a simple method of adding .no to the end of the file. That way if you ever need to undo it, simply go back in and remove the .no and your not trying to remember what the file name and extension was. Now here are the file names for each file, you will need something like root explorer and a rooted Fascinate to do this, and you can't rename a file unless you tap the mount system as r/w not r/o, its easy here are the examples of how I did it.
/system/recovery-from-boot.p becomes /system/recovery-from-boot.p.no
/system/bin/recovery becomes /system/bin/recovery.no
/system/etc/install-recovery.sh becomes /system/etc/install-recovery.sh.no
Superuser+busybox
CWR 3/30 Fix all
CWR3 Voodoo.tar Blue
times_infinity's recoveries
Gingerbreak v1.20
Special thanks to Adrynalyne, Imnuts, Jt1134, Nitsuj17, Landshark, Sbrissen, ChainsDD, Times Infinity, and Comradesven and anyone I forgot to thank, for creating and sharing, the heimdall, odin, and other files.
This is a great source of information. The formatting could be a little better though. Perhaps break up those great giant paragraphs a bit. It would be easier to follow along. Especially for noobs in a panic state after "bricking" their phone.
Great work though. This should be stickied.
I will Update thread to an easier format over the next few days. Thanks for the tip, i looked good to me but now i see what you are talking about. It took hours today to gather all the info, pull up each program ans walk through it. I guess I was in mental overload.
Attempted Heimdall today after odin has failed using the EB01, error was "Failed to retrieve config descriptor" any ideas?
If I flash with all CSC options unchecked the flash is successful.
When trying to boot after flash without CSC i receive a phone and a computer with a dotted line connecting the to on power up. Phone will return to DL mode.
Also attempted to flash DL01, it seems there are several files that correspond with Heim that are not in the package are the EB01 files interchangeable with the missing files?
Not trying to be that guy, but the DL01 is actually DI01. The build number DL01 doesnt exist.
Sent from my SCH-I500 using XDA App
times_infinity said:
Not trying to be that guy, but the DL01 is actually DI01. The build number DL01 doesnt exist.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
You were that guy.
times_infinity said:
Not trying to be that guy, but the DL01 is actually DI01. The build number DL01 doesnt exist.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Oops, but at least i was consistant on the typo...LOL. I will fix it this weekend.
I just got a fascinate.....commingle from a vibrant.....I can't find a root method that doesn't include a computer,my previous phone I downloaded update.zip went into recovery and bammo rooted then have spent the last unknown amount of time playing with the Roms and now want the same. With this phone anyone help? Thanks.
Sent from my SGH-T959 using XDA Premium App
Figured out this morning I wasnt using my factory usb cable switched cables odin'd stock eb01 worked perfectly now I feel retarded.
Sent from my SCH-I500 using XDA App
Excellent write up. Thanks a bunch.
What are some other differences in Odin 1.7 vs 1.3? I have used 1.3 many times and never had any issues. Any improvements?
Thanks so much Dale! headed to work now, but will try this tonight
Rayn1328 said:
I just got a fascinate.....commingle from a vibrant.....I can't find a root method that doesn't include a computer,my previous phone I downloaded update.zip went into recovery and bammo rooted then have spent the last unknown amount of time playing with the Roms and now want the same. With this phone anyone help? Thanks.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=897889 you pretty much need a computer. z4root worked at one time iirc I used it on my fascinate at some point.
More reasons as to why you should never fear bricking your phone and testing new kernels and ROMs. Thank you for the thorough tutorial.
cbalt said:
http://forum.xda-developers.com/showthread.php?t=897889 you pretty much need a computer. z4root worked at one time iirc I used it on my fascinate at some point.
Click to expand...
Click to collapse
I prefer what i think is a much simpler method. Just go to this link and follow Post 2. I don't believe I have ever had it so easy to root a phone:
http://forum.xda-developers.com/showthread.php?t=948722
nice write up, thanks for posting. I hope I never have to use it
netwalker0099 said:
Attempted Heimdall today after odin has failed using the EB01, error was "Failed to retrieve config descriptor" any ideas?
If I flash with all CSC options unchecked the flash is successful.
When trying to boot after flash without CSC i receive a phone and a computer with a dotted line connecting the to on power up. Phone will return to DL mode.
Also attempted to flash DL01, it seems there are several files that correspond with Heim that are not in the package are the EB01 files interchangeable with the missing files?
Click to expand...
Click to collapse
Got that once cause i didn't install the drivers in zadig. I installed it, didn't reboot PC, worked fine. If you had the CSC unchecked then you didnt install a cache or database, so no your phone wont work like that. Unless you ran into something new, follow this guide step by step, and it should work. I would also make sure you get the files from here, they are tested and known to be good. There are some incomplete, and bad files out there, these work.
Heimdall is officially the greatest piece of software ever created and DaleV is my hero!!! FINALLY have my phone up and running again! Was serious contemplating dropping around $300 for a new phone on Craigslist.
Trying to root a Fascinate, and it showed up in ODIN once, then the flash failed. Now it's in download mode and not showing up in ODIN, any ideas?
Oxirane said:
Trying to root a Fascinate, and it showed up in ODIN once, then the flash failed. Now it's in download mode and not showing up in ODIN, any ideas?
Click to expand...
Click to collapse
after it failed did you unplug then replug and go back into download mode? also I updated the OP with a superuser.zip file it works better than the one in the market for showing you have root access, I have no idea why.
Also you might try a different usb port, sometimes that does the trick.
I've unplugged and replugged and rebooted it a dozen times... it first goes to 2e recovery, then I reinstall packages and it reboots to the simplified download mode with just basic little icons. Doesn't get recognized by the computer though. :/
Wont boot into anything but 2e, and from there into oldschool download mode.
I gave up looking. I dont know what happen because i rooted my tab and somehow i cant go back. I did factory reset but no luck. I just wanna go to back to 3.1 so i could update my gtab to 3.2. I know its here in this thread but i cant find it (i tried) . If you could just help me out so i could update to 3.2 that would be a help. THANKS SO MUCH!!!!
JESSICA
Hiya, I haven't done this, but will try to help anyway.
Can I ask first, why do you want to go back to the "factory" state? Do you need to return it?
Edit: coz just having root access does not stop you updating to 3.2...
factoy reseting your device will NOT WIPE SYSTEM and thats were superuser is. You need to Odin flash the firmware of you choiche. thats the best and easiest way, its done in 5 minutes. And i think its wise to not update while rooted as some have reported errors during update and some have not. good luck
Why not just flash Galaxy Task 10 Rom? It's 3.2 and much better than the stock 3.2. All you need is Clockwork Mod installed and you can do that with Odin.
I flashed it with Pershoots kernel and it runs VERY stable. You can also flash it with the stock kernel if you don't want overclocking, etc.
I bricked my galaxy tab. I want to go back to 3.1 so i could update it to 3.2. I dont know much aout hacking so I guess i messed up. Im trying to go back to 3.1 so i could update my tab to 3.2 then root it. However, i couldnt find any thread to fix.
thanks for your all reply. If I used 3.2 rom? will it stay 3.2 if I use other roms? thanks in advance
jessica
Well, a custom rom like Galaxy Task 10 is "3.2" and so yes, it will stay 3.2.
I'd recommend Task's rom, it's much better than the stock 3.2.
And no doubt he will update to Android 4 (IceCream Sandwich) so you'll be able to keep up to date.
Your comments about bricking your device are now confusing the situation.
Can you please write what steps you did (or thought you did), and what your device does or does not do right now?
Also, please be vey specific about what device you have, whether it is 3g+wifi or just wifi. Give us the model number from the box if you do not know.
We'll help, we just need details.
Cheers..
i have the 16gb wifi us version. I used odin and
everything went perfect but still cant update to 3.2 using kies. Kies say your tablet doesnt support firmware upgrade. What I did next is i tried to root my tablet
somehow it wont let me root and giving me this "your storage not prepared yet please use ui menu for format and reboot actions"
I downloaded termulator and root checker to see if im rooted however it says im not. So I cant download any roms or upgraded to rom 3.2.
Ive been searching online to how to fix it for almost 6 hours and cant find a solution. pls help!!! THANKS FOR YOUR HELP GUYS AND I REALLY APPRECIATED!
Jessica
I've put numbers (eg [*1]) in to your message quoted below;
killua_bryan said:
i have the 16gb wifi us version. I used odin and
everything went perfect [*1] but still cant update to 3.2 using kies. Kies say your tablet doesnt support firmware upgrade [*2]. What I did next is i tried to root my tablet [*3]
somehow it wont let me root and giving me this "your storage not prepared yet please use ui menu for format and reboot actions"
I downloaded termulator and root checker to see if im rooted [*4] however it says im not. So I cant download any roms [*5] or upgraded to rom 3.2.
Click to expand...
Click to collapse
1. Used ODIN to do what? Put in a recovery image? or replace a whole ROM?
2. Is a firmware upgrade available? There isn't for mine, I'm also on a 16g wifi version but no 3.2 FW has been released for my specific model yet...
3. How? By flashing a zip in recovery? Can you post the link to the information you used to do this?
4. These may give false negatives. Check in your apps list to see if you have "SuperUser". If so, run it, it will show you apps that have tried to ask for root access. They may have been asking but you didn't receive the prompt, and have therefore been denied root access. If so, grant them root and try to run them again.
5. Just FYI, you don't need root access to download/install a ROM, you need a "recovery".
Honestly, I think the best thing for you to do (besides answer these questions ) is to download the ROM Galaxy Task 10, boot into recovery, and flash it. That is assuming you do have a recovery image in place, which depends on the answer to #1 above.
i tried everything. it wont let me root the device. Tab keep saying your storage not prepared yet please use ui menu for format and reboot actions. So i cant use any or replace rom. I upgraded my tab to 3.2 before but kies keep saying its not upgradeable. Any suggestions? thanks!
jessica
Sorry, I need specific information to those questions from my previous post. As stated, replacing a rom doesn't need root, it needs a recovery image.
Maybe some screenshots of your tab and/or computer would help? Or photos, if you can't take screenshots?
Sorry, if you won't answer my questions I'm not going to be able to help.
ill try to post some pics. sorry!
killua_bryan said:
ill try to post some pics. sorry!
Click to expand...
Click to collapse
Start with answering the questions, please?
Pics can tell about "now" but I need the history too.
Back to Stock,
Here's what I did to get back to stock.
You must choose the files under the GTAB GT7510 /retail/google edition
First you have to install Clock Work Recovery using this link:
http://forum.xda-developers.com/showthread.php?t=1171089
Download the files under FilesForDummies 2 mirrors are listed. These files will help you flash Clockworkrecovery and also the retail recovery is included.
This step needs to be flashed through Odin. You also need to root your device after the flash if your not already rooted. You need the Clock Work Recovery to enter recovery mode so you can flash the Stock Files that I'll point you later.
Once you've flashed the Clockwork recovery you should reboot normally. At this point try to root your device if its not already rooted. Look for OneClickRoot I'll point to that later if you don't already have it.
Not too sure if you need to be rooted as I've always rooted my device before installing roms anyways, but you can try the next steps if your not rooted. If the next steps don't work then reboot and root the device.
Start with your tablet off.
1. Push Powerbutton as soon as you see it startup put your finger on the volume down button and press until you see the android. One side is a box saying recovery the other download. Choose download mode by pushing volume down to choose and up to enter you will be prompted at this time just take if from there. Make sure Odin is up and running, choose the PDA file as Clockwork cm4.04 its that file in the zip you just downloaded and extracted.
2. Flash Clockwork file Clockwork CM4.04 etc... using ODIN should be included in the zipped file you've downloaded. Make sure these files are unzipped in the same folder. Now after flashing the tablet should reboot and it would look normally like it did before except you have clockworkrecovery instead of the stock one.
3. Go back to the link I sent you above and scrool down until you see flashing roms and kernals heading. Click on Stock US Retail Rom, this will download the Stock US Retail 3.1 file for Clockwork. choose : hc-3.1_ota-full_sam file, and then also click on the recovery hc3.1 file.
Put these files in the same folder or somewhere where you can find them. Not sure if these are already in the file you downloaded above, if they are then don't have to download these.
4. Unzip the files and make sure you remember where they are.
5. With your tablet on and plug into your usb port transfer the hc-3.1 ota file you've just downloaded and put it into the root directory of your tablet. It should not be in any folders just in the /SD folder.
5. Now turn off the tablet, once off push power button again and enter recovery this time choosing the left android with the box. Push left button to choose and right volume button to enter. Now you should be in clockwork recover orange writing. Now look for update from Sd card, use volume button left to choose and right to enter. Click then you should see the file you've copied on your sd card of your tablet. Click down and then use left volume button to choose.
6. Once there it should start flashing the Stock Rom, once done it will return you to where you started, at this point you can choose to wipe data/ cache etc. You can do that to make sure you've clear everything in your tablet before you actually reboot. Once done choose reboot and your tablet should be back to stock but not just yet.
7. You could leave Clockwork on there or you can go directly back to stock by doing the same steps from 1 and 2 and flash the STock Recovery instead. This will bring the tablet right back to HC3.1 and Retail Stock. From this point on you can flash up to 3.2 etc.
Hope this helps but I can't go into it in any length as I'm hoping you know most of the terminolgy.
There is also videos on this link to help you.
nice
I suspect that if we see screenshots, that the wrong recovery has been flashed right from the start.
My colleague brought his stock A500 to me in a bricked condition last week.
I need a way to restore it. If I try to do a wipe it will say bootloader error if i try the recovery the droid falls down with the red sign with the exclamation mark.
This tablet has never been rooted, my colleague is not in to such things, it's lived its life with ordinary acer otas and the occational very young human (5 year old) trial wich it has survived.
He has installed all the OTAs he ever got on the tablet and this is in Sweden so it would probably be a 4.0.3 acer stock on it now.
I'm guessing it has died during a OTA or something. if i turn it on it will sit at the acer logo indefinitly.
I Bricked my A500 during a rooting atempt resulting in me needed to flash a stock rom to get it working again, but i cant find the thread i read to un-brick my A500.
Please Help!
try this http://forum.xda-developers.com/showthread.php?t=1839313
dibb_nz wrote:
try this http://forum.xda-developers.com/showthread.php?t=1839313
Click to expand...
Click to collapse
Well that thread seems to hold all i need, although i can't do a full wipe. when i do the flipswitch wipe procedure it halts with bootloader error
Im hoping to just be able to flash the stock rom from the link you gave me. Is it entirely necessary to do the wipe prior to flash? can i wipe it afterwards?
Hogbola said:
Well that thread seems to hold all i need, although i can't do a full wipe. when i do the flipswitch wipe procedure it halts with bootloader error
Im hoping to just be able to flash the stock rom from the link you gave me. Is it entirely necessary to do the wipe prior to flash? can i wipe it afterwards?
Click to expand...
Click to collapse
we're assuming the tab is full stock and currently on ICS...
and we're assuming he never tried to 'fix' his tab by flashing one thing or another...
the bootloader error worries me...what exactly does it say...
Yes the wipes are really important!! and not being able to use the button method to do so is concerning...
what happens with the Over The Air (OTA) updates is its just that...an update...it leaves all your settings/data intact. When you OTA from one build to another, like Gingerbread 3.0 to Honeycomb 3.1/2 and then to ICS 4.0 - you drag all your apps and settings with you and of course some things that work with 3.2 will not work under ICS....fjor instance, lots of folk had trouble with wifi disconnects, once they got to ICS - or they had apps force closing and other 'glitches'. This is why everyone tells you to do the wipes - as this fixes these things! In the case of stock ICS my gmail would f/c all the time no matter how many times I wiped/formatted....So for a smooth running tab - flash a custom rom!!!!!!
But getting back to you...
From that link i gave you...download the 3.1_Full.zip....its decrypted so just extract it and get the "update.zip" from it..
This "update.zip" is not an incremental "update" but the full stock rom....
once installed you'll be on GB you will need to root it with iconia root and then use acer recovery installer to flash cwm....(get these from the playstore)
do a backup or adb devices so you can get your CPUID....this is important...if anything goes wrong at any stage this is the only thing that will get you unbricked....see the cpuid link in my sig for more on this, please take the time to read it, even if it doesnt make much sense to you, read it anyway....
AFTER you have retrieved your cpuid, you can nvflash the patched bootloader/recovery pkg which means you are able to flash ICS/JB custom roms
they cannot be flashed via cwm like normal...you must use nvFlash to do it....
OR
take the OTA route to ICS...this takes a bit of time...I did it last week and it was a good 6-7 hours to go from GB to ICS
there are pre-rooted stock roms if you wanna stay stock see civato's stock rom thread for that here http://forum.xda-developers.com/showthread.php?t=1633907
official stock rom list by blackthund3r are here http://forum.xda-developers.com/showthread.php?t=1816560
civs guide to flashing the unlocked bootloader here http://forum.xda-developers.com/showthread.php?t=1622425
I am in a similar situation. Push the power button and it goes to a screen with white acer on black and stays there. Totally stock ICS, no root. I tried the update.zip thing and after automatically rebooting it says "Boot verified failed...". I don't have my cpuid, or have installed previously CWM or anything like that. I can get into APX mode. This guy here: http://forum.xda-developers.com/showthread.php?t=1751978 could only get into APX with no cpuid as well, but i don't understand all of the ubuntuu and command line stuff. I would love for someone to be able to walk a dummy like me through this mess. Thanks for any help.
if u got boot verified fail error you need nvFlash to repair that....as u know, with nvflash you need yr cpuid....wot about usbdeview? if you've never plugged yr tab into yr PC - then it won't work and the ONLY other way is Linux....
might be best to start yr own thread with a descriptive title, not just a help I'm bricked no uid, thread there are hundreds of those....the more effort u put into the title the more likely you will attract the attention of someone who can actually help...and remember you just don't need a bit of help but a blow by blow description of what to do and how....this will be very time consuming....at the very least get ubuntu installed, maybe just try a few things, anything to show you are capable of at least giving it a go yourself..
there are others who would like 2 know how to do this as well...having a specific thread of its own would be great
good luck
dibb
Sent from my GT-I9300 using Tapatalk 2
Actually, I have connected it to my PC before. Only for transferring media though. If I've done that, is the some way to retrieve my cpuid from the PC?
yup...usbdeview.zip see the bottom of the OP in the cpuid guide in my sig
Thanks alot for your help. I used usbdeview and got my cpuid. Now I should use nvflash? Know where a good step by step is for that one?
you could try the one in my sig??
dibb_nz said:
you could try the one in my sig??
Click to expand...
Click to collapse
Right. Sorry, I didn't notice that before. Thanks again for your direction.
"To install one of these roms you will need a custom recovery and to get that you must flash the patched bootloader FIRSt - once its patched you can install a recovery any old way you like"
Looking at that guide, would you please tell me what a custom recovery is and how to get one? Btw, I don't plan to do a custom ROM yet, I just want to get the damn thing working first. Was thinking of using the HC EUUs from the firmware files list. However there are two files, a .rar and a .exe listed. Which do i use?
NvigR8 said:
Right. Sorry, I didn't notice that before. Thanks again for your direction.
"To install one of these roms you will need a custom recovery and to get that you must flash the patched bootloader FIRSt - once its patched you can install a recovery any old way you like"
Looking at that guide, would you please tell me what a custom recovery is and how to get one? Btw, I don't plan to do a custom ROM yet, I just want to get the damn thing working first. Was thinking of using the HC EUUs from the firmware files list. However there are two files, a .rar and a .exe listed. Which do i use?
Click to expand...
Click to collapse
The .rar EUU is for an A500, the .exe is for the A501, which do you have?
I've got the a500. However, I decided to go with a custom ICS rom after all. I managed to put a new bootloader and custom recovery on using the a500apx flash tool. That part went fine. I flashed this rom:
Acer_AV041_A500_1.054.00_WW_GEN1-FULL-ROOT (original odex)
and that appeared to go well according to twrp, but after rebooting, it just shows the bootloader again and stops there. Not sure what i did wrong.
I renamed the rom update.zip. Should i not have done that?
well congrats for getting thru the flash process with no probs!!!
as far as renaming to update.zip that was not such a good move...hopefully things havent been screwed up too much
just go back into recovery and do a FULL wipe/format
then to flash use the option "install from zip file" not sure where that is in TWRP but it will have one
Okay. I will reflash the rom after completely wiping again. Thanks.
On a different note, why do roms require particular bootloaders?
Also different, how do you like your SGS3? If i can manage to fix this thing, perhaps I'll root my phone...
NvigR8 said:
Okay. I will reflash the rom after completely wiping again. Thanks.
On a different note, why do roms require particular bootloaders?
Click to expand...
Click to collapse
The stock ICS BL is encrypted - more or less - the only way to 'flash' a recovery or rom is to have the "key" that "unlocks" - it more or less - if you dont use the right key then the OS will not boot - the 'key' is based on your cpuid which is why everyone is forever telling you to save it somewhere safe....
Also different, how do you like your SGS3? If i can manage to fix this thing, perhaps I'll root my phone...
Click to expand...
Click to collapse
I enjoy the big screen, took awhile to get used to it in my hand, kept dropping it....then I ran it over with my 44tonne truck after 3 days and munted it!!!!
I have a case for it now, and its gr8 - I havent installed a rom on it yet...the forums over there are jampacked and I have no idea what I'm doing, lol - its the first android device I've had that I've left stock for so long...but it does what I want...the camera is awesome -burst mode is the bomb - BUT do I think it was worth the money???? Still on the fence about that one.....
Ouch. Sorry to read about running over your phone. That would kill me. I really like my SGS3. I think I'll look into rooting it just to be able to back it up and get rid of the bloatware. I did that on my Captivate and prior to today, thats all I've ever done modding wise to an android device.
So, I managed to get my tab up and running again. Yay! I reflashed the rom w/out changing the name and worked like a charm. Now If only I knew why this happened in the first place... Thanks for all your help.
NvigR8 said:
Ouch. Sorry to read about running over your phone. That would kill me. I really like my SGS3. I think I'll look into rooting it just to be able to back it up and get rid of the bloatware. I did that on my Captivate and prior to today, thats all I've ever done modding wise to an android device.
So, I managed to get my tab up and running again. Yay! I reflashed the rom w/out changing the name and worked like a charm. Now If only I knew why this happened in the first place... Thanks for all your help.
Click to expand...
Click to collapse
yeh sometimes happens with the tab for some reason - thank your lucky stars it didn't get stuck in apx mode...if that happens its normally a hardware fault so theres not alot u can do...I'm just pleased you got sorted without too much drama and it was as easy as reflashing the zip....so now you have the v8 BL - you're gold!!!
dibb_nz said:
we're assuming the tab is full stock and currently on ICS...
and we're assuming he never tried to 'fix' his tab by flashing one thing or another...
the bootloader error worries me...what exactly does it say...
Yes the wipes are really important!! and not being able to use the button method to do so is concerning...
what happens with the Over The Air (OTA) updates is its just that...an update...it leaves all your settings/data intact. When you OTA from one build to another, like Gingerbread 3.0 to Honeycomb 3.1/2 and then to ICS 4.0 - you drag all your apps and settings with you and of course some things that work with 3.2 will not work under ICS....fjor instance, lots of folk had trouble with wifi disconnects, once they got to ICS - or they had apps force closing and other 'glitches'. This is why everyone tells you to do the wipes - as this fixes these things! In the case of stock ICS my gmail would f/c all the time no matter how many times I wiped/formatted....So for a smooth running tab - flash a custom rom!!!!!!
But getting back to you...
From that link i gave you...download the 3.1_Full.zip....its decrypted so just extract it and get the "update.zip" from it..
This "update.zip" is not an incremental "update" but the full stock rom....
once installed you'll be on GB you will need to root it with iconia root and then use acer recovery installer to flash cwm....(get these from the playstore)
do a backup or adb devices so you can get your CPUID....this is important...if anything goes wrong at any stage this is the only thing that will get you unbricked....see the cpuid link in my sig for more on this, please take the time to read it, even if it doesnt make much sense to you, read it anyway....
AFTER you have retrieved your cpuid, you can nvflash the patched bootloader/recovery pkg which means you are able to flash ICS/JB custom roms
they cannot be flashed via cwm like normal...you must use nvFlash to do it....
OR
take the OTA route to ICS...this takes a bit of time...I did it last week and it was a good 6-7 hours to go from GB to ICS
there are pre-rooted stock roms if you wanna stay stock see civato's stock rom thread for that here http://forum.xda-developers.com/showthread.php?t=1633907
official stock rom list by blackthund3r are here http://forum.xda-developers.com/showthread.php?t=1816560
civs guide to flashing the unlocked bootloader here http://forum.xda-developers.com/showthread.php?t=1622425
Click to expand...
Click to collapse
When i do the wipe it says
Code:
Erasing userdata...
Code:
Unrecoverable bootloader error (0x19000008)
Unrecoverable bootloader error (0x19000008)
Hogbola said:
When i do the wipe it says
Code:
Erasing userdata...
Code:
Click to expand...
Click to collapse
I googled your error - the consensus from what I read is a corrupt OS due to running OTA updates...
Some had luck with rebooting. Others had to send it to Acer.
Did you run the update.zip? so what happens when you run the update.zip
Are you able to get into "apx mode"? If you can, hook up to your PC and see if your tab is recognised as an "apx device" - check "Hardware, Printers in win7"
Thats all I can suggest atm - if your tab does get into apx mode OK then you can find your cpuid by running Linux -
Maybe ask the guy if he's ever had the tab hooked up to his PC like to transfer files and stuff - get him to download "USBdeview" to his PC -
this will show every single device thats ever been connected to the PC and it will show the "cpuid"...
Even if we do get the uid theres no guarantee it will fix the bootloader error - but we may as well explore all the options we can....
dibb_nz said:
USBDeview will only work when you have previously plugged your tab into the PC WHILE you were running HC Rom and BL
1. If you haven't plugged your tab into this pc before, do so now, before you run the program. HC ROM/BL ONLY
1a. Run the exe and you will be presented with a window of all the USB devices you have ever plugged into your computer.
2. Click on "VendorID" column along the top to sort them
3. Look for the number "0502" under Vendor ID AND "3325" Product ID
4. In the serial number column will be a 15-digit number this is your device ID.
5. Write the number down and put a 0 in front of it and now you have your CPU ID!!!
Click to expand...
Click to collapse
Hello!
I was recently gifted a Samsung Galaxy Tab S6 SM-P13. I only use my tablet to watch chess videos on Youtube, so I was happy to get a tablet to mess around a bit with it. I did not know much about rooting, but I thought installing Lineage OS and learning from it would be exciting.
I'm good at following instructions, but with some overenthusiasm, I realized that Lineage OS did not support my model a bit too late. So I reached step 5 of "Installing a custom recovery using heimdall" in the official instructions (https://wiki.lineageos.org/devices/gta4xlwifi/install).
But I could not do step 6 as it could not boot into recovery mode. It will stay in download mode with the following message:
<!>
_partition recovery
Reason recovery: Error verifying vbmeta image: invalid vbmeta header(6)
CUSTOM recovery
VBMETA P613XXU1AVG5, 54410278R
I have looked around to see fixes, but I have felt slightly overwhelmed. So I have installed Odin, and at this moment, as Lineage OS is not an option, I don't care which ROM to install (stock, lite, etc...).
Can someone guide me on what to do now so I won't worsen things?
Thank you for your help in advance!
Hey Pablosky000, have you tried using odin to flash stock firmware to fix it back to how it orignally was?
oFluffy said:
Hey Pablosky000, have you tried using odin to flash stock firmware to fix it back to how it orignally was?
Click to expand...
Click to collapse
Hi. Liked I said, I feel a bit overwhelmed and risk-averse at the moment. I have Odin installed and a the stock lite version downloaded. Was hoping for a "Try Odin with stock first" before making any further mistakes.
Pablosky000 said:
Hi. Liked I said, I feel a bit overwhelmed and risk-averse at the moment. I have Odin installed and a the stock lite version downloaded. Was hoping for a "Try Odin with stock first" before making any further mistakes.
Click to expand...
Click to collapse
I don't fully understand whether or not you are wanting to return it to normal or not here, but I do know about the S6 lite. I have my own S6 lite, and I noticed no one has been updating the patched files for it. A recent update forces it to have the file it was talking about, and unless someone makes a specific twrp for that device specifically, we won't be able to use a custom recovery to flash a rom.
If your issue is getting it into recovery mode however, you aren't alone. The Samsung tablet's usually have the same method for launching, but this one specifically was weird.
You have to:
1.Unplug it
2.Hold power and volume down
3. As soon as it turns off plug it back in and begin holding the recovery key buttons
4.If it isn't in recovery you may have just missed the small window you had to do it, which is fine just start from step one until it works.
If you did flash your own recovery and expected it to show the stock Samsung recovery menu, that won't happen since you overwrote it by flashing a recovery. You should be able to find your device model on https://sfirmware.com/
In odin "AP" is where you flash your recovery files. If the device isn't working you may have to also flash the "BL" or binaries for your device. I usually do anyway just to make sure it is going to work correctly. Make sure you have adb, and any Android drivers needed for it to work. Let me know if you need more help! Thanks.
oFluffy said:
I don't fully understand whether or not you are wanting to return it to normal or not here, but I do know about the S6 lite. I have my own S6 lite, and I noticed no one has been updating the patched files for it. A recent update forces it to have the file it was talking about, and unless someone makes a specific twrp for that device specifically, we won't be able to use a custom recovery to flash a rom.
If your issue is getting it into recovery mode however, you aren't alone. The Samsung tablet's usually have the same method for launching, but this one specifically was weird.
You have to:
1.Unplug it
2.Hold power and volume down
3. As soon as it turns off plug it back in and begin holding the recovery key buttons
4.If it isn't in recovery you may have just missed the small window you had to do it, which is fine just start from step one until it works.
If you did flash your own recovery and expected it to show the stock Samsung recovery menu, that won't happen since you overwrote it by flashing a recovery. You should be able to find your device model on https://sfirmware.com/
In odin "AP" is where you flash your recovery files. If the device isn't working you may have to also flash the "BL" or binaries for your device. I usually do anyway just to make sure it is going to work correctly. Make sure you have adb, and any Android drivers needed for it to work. Let me know if you need more help! Thanks.
Click to expand...
Click to collapse
Perfect!!! Thanks a lot. I didn't have much expectation apart from "not bricking it". I just wanted to make sure I did not do anything stupid. Follow your instructions. And it worked perfectly! Thanks a lot for the help! I truly appreciated. I am usually alright at a lot of these things, but I ended up being a bit lost, and just wanted to make sure I stopped doing stupid stuff!
Million thanks!!!!
I am facing a similar issue, but I can't seem to find a recovery image, so can you please help with that? I went to the sfirmware website, but can't locate the recovery image for sm-p613, though I did find it for other models such as p610. At this point, I'm fine with going stock os if it means I haven't bricked the tablet.
mr_scientific127 said:
I am facing a similar issue, but I can't seem to find a recovery image, so can you please help with that? I went to the sfirmware website, but can't locate the recovery image for sm-p613, though I did find it for other models such as p610. At this point, I'm fine with going stock os if it means I haven't bricked the tablet.
Click to expand...
Click to collapse
I softbricked mine with Snapdragon last night. See the fix and link to a working recovery image here. Developer says there's no hope for Snapdragon support for the S6 Lite Wifi now or in the future. Samsung doesn't even support the firmware reload for this device in their own Smart Switch Windows app.
deckardsdream1988 said:
I softbricked mine with Snapdragon last night. See the fix and link to a working recovery image here. Developer says there's no hope for Snapdragon support for the S6 Lite Wifi now or in the future. Samsung doesn't even support the firmware reload for this device in their own Smart Switch Windows app.
Click to expand...
Click to collapse
Thank you, I managed to get my tablet working. Really wish samsung made the firmware more available.