Database Users

My phone got screwed after upgrading my rom

Hello,
Im not new to rom upgrades ive done it before with many rom releases
I installed this rom like any other
Dutty's HD V3.4 XT
after installing this my cell's screen got blury and when i take it into hypernate and bring it back (press the off button) it get fixed, something i have never had before
Other than that i cannot start the phone proccess, everytime i do, its getting closed.. so my phone got no service now,
I tried upgrading to another rom after trying this one and got the same response
(the phone service is the one allowing me to make phonecalls, the WM6 is starting up fine but really slowly)
Ive even tried hard restarting my device a few times, nothing fixe's this..
Anyone got a solution for this?

http://forum.xda-developers.com/showthread.php?t=505377

DRTigerlilly said:
http://forum.xda-developers.com/showthread.php?t=505377
Click to expand...
Click to collapse
I already flashed my rom 2 times and got those results, what good will this do?

what spl are you on
what my senior member above meant to say is what spl are you on
1.14 or 1.56
check that first and then follow cracwhore's instruction step by step

kingspeare said:
what my senior member above ment to say is what spl are you on
1.14 or 1.56
Click to expand...
Click to collapse
right now i cant check since i left the phone at home and im at work, ill give you guys an answer in a few hours, thanks.

Amit86 said:
right now i cant check since i left the phone at home and im at work, ill give you guys an answer in a few hours, thanks.
Click to expand...
Click to collapse
Reason why you are getting this colour distortion is because you haven't used USPL or HSPL before flashing rom
If you are using USPL you need to re-run USPL before every flash to rom or radio. If you are using HSPL you only need to run it once.
Check your SPL in bootloader
If it says 1.54.0000 you will need to use USPL and then flash 1.56+ rom
As mentioned previously by DRTigerlilly & kingspeare you will need to follow cRaCKwHoRe's guide correctly and make sure you follow the whole guide.
Let us know if you are still having problems or alternatively (and I'd recommend this) post your queries in cRaCKwHoRe's guide thread so either myself, cRaCKwHoRe etc can provide you with better support

Returning phone to HTC

Heya ppl
My phone has a weird issue, Im goint to send it back to HTC. I went to HTC website and flashed their original latest rom, do i need to do anything else to send it back to them stock?
This is the rom filename:
RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.34_1.13.25.24_Ship
This also has SPL, or do i still need to flash SPL, and what SPL version i need to flash?
Thnx alot in advance, take care!
FoOtY

whats the weird issue???... maybe somebody here can help you, which will prove it not so weird after all..

I flashed the stock SPL and ROM back, nothing more. My screen went bananas totally loosing it touch orientation i.e pressing something on the screen the pressure was 1-2cm above where i pressed(sure i dropped it on the street a few times accidently). They changed the whole screen, bazel and the only old part was the back cover that wasn't change. Prompt and fast service within the warranty period.

leftkats said:
whats the weird issue???... maybe somebody here can help you, which will prove it not so weird after all..
Click to expand...
Click to collapse
The problem is with my device screen. Suddely the screen goes all black and can't use it, it's like it's powered off but the phone isn't off. It still responds to the volume change keys (it still makes that annoing sound but the screen stays all black.
I have to get the battery out, sometimes it will start working again, sometimes I have to wait some time and pull out the battery out for a couple of times very strange.
It also happens when i flash the original rom from HTC (the one i mentioned in first post)
Can it be problem with the SPL? The original HTC rom has SPL included?
What can I do? I tried every rom on this forum, problem exists on every rom even original rom.
Do I still need to flash a SPL when using the original HTC rom from first post?
Thnx in advance guys
Peace!!

I put SPL 1.14 back and default rom.

Thanks for the reply!
My only question right now is, what SPL to use with this ROM:
RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.3 4_1.13.25.24_Ship
SPL 1.13, 1.14, 1.15, or 1.54?
Thanks!
Edit: I hope to fix my device screen problem by flashing stock SPL.

3sade said:
Thanks for the reply!
My only question right now is, what SPL to use with this ROM:
RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.3 4_1.13.25.24_Ship
SPL 1.13, 1.14, 1.15, or 1.54?
Thanks!
Edit: I hope to fix my device screen problem by flashing stock SPL.
Click to expand...
Click to collapse
Your need SPL 1.54 or greater

Fallen Spartan said:
Your need SPL 1.54 or greater
Click to expand...
Click to collapse
Thanks for your answer mate, I did only find STOCK SPL 1.54, a greater version exists? I found version 1.54 in the SPL topic.
Peace!

3sade said:
Thanks for your answer mate, I did only find STOCK SPL 1.54, a greater version exists? I found version 1.54 in the SPL topic.
Peace!
Click to expand...
Click to collapse
1.54 is latest, sorry, was thinking of something else....whoops

3sade said:
The problem is with my device screen. Suddely the screen goes all black and can't use it, it's like it's powered off but the phone isn't off. It still responds to the volume change keys (it still makes that annoing sound but the screen stays all black.
I have to get the battery out, sometimes it will start working again, sometimes I have to wait some time and pull out the battery out for a couple of times very strange.
It also happens when i flash the original rom from HTC (the one i mentioned in first post)
Can it be problem with the SPL? The original HTC rom has SPL included?
What can I do? I tried every rom on this forum, problem exists on every rom even original rom.
Do I still need to flash a SPL when using the original HTC rom from first post?
Thnx in advance guys
Peace!!
Click to expand...
Click to collapse
I got the same problem on my HD (original ROM, never flashed) and I sent the phone to the HTC service.
Result: they changed the motherboard. So I suppose it is a hardware issue and not a ROM issue.

Had the same problem as well, was sent back already 2 times! Hardware problem in motherboard. What is this SPL? can you post the link with the thread?
thanx

1st one who killed the HD2 ;-(

I just HSPL my new T-Mobile 2.08 US HD2.
Worked soooo smooth. Thanks for that. Now the tricky part, I did not read detailed enough that the rom I flashed was a 1.66 based one.
now the HD2 is dead, no powerup, bootloader mode, reset or chargeing led.
Any way to safe it or back to t-mobile?
Thanks Guys

=( omg.... i was impatient too... I was downlaoding all these roms but remembered i didnt install the new HSPL thing.. and then i read the posts -_- sigh.. sorry man

I am so sorry man. Your best bet is to hope you can find a station where they'll work some factory reset magic on there...
Yeah. Sorry to hear that. I wish the SPL program would warn the user or refuse to install if it detected an old 1.66.

No brother
YWell Brother u and me both have to play the old hood wink on tmobile and play the it just died face so we can get a new one. Fortunatly we have 14 days if you kept your receipt, to take it back and nag saying it just shut of for no reason. Its hell of bricked, even HTC would have to completely take it apart to fix it, so no trace of anything would ever come back. the bad thing is their sold out everywhere till Tuesday or Wednesday. But ill wait its a bad ass phone. woooo! where do you live dude? in vegas?

I have read that you can microwave it for a few seconds and that kills it stone dead. No way they can tell what you flashed.
This is a very extreme method and an absolute LAST RESORT!!!!

pablo11 said:
I have read that you can microwave it for a few seconds and that kills it stone dead. No way they can tell what you flashed.
This is a very extreme method and an absolute LAST RESORT!!!!
Click to expand...
Click to collapse
That's.. insane.

madman_nyc said:
I just HSPL my new T-Mobile 2.08 US HD2.
Worked soooo smooth. Thanks for that. Now the tricky part, I did not read detailed enough that the rom I flashed was a 1.66 based one.
now the HD2 is dead, no powerup, bootloader mode, reset or chargeing led.
Any way to safe it or back to t-mobile?
Thanks Guys
Click to expand...
Click to collapse
remove your battery for 3 minutes and put it again and try ti lunch boot loader

Have you tried the SD card flash method.
You need to copy the original Tmob ROM file to your blank SD card, rename it to leoimg.nbh (i Think), and then try start in bootloader.

madman_nyc said:
I just HSPL my new T-Mobile 2.08 US HD2.
Worked soooo smooth. Thanks for that. Now the tricky part, I did not read detailed enough that the rom I flashed was a 1.66 based one.
now the HD2 is dead, no powerup, bootloader mode, reset or chargeing led.
Any way to safe it or back to t-mobile?
Thanks Guys
Click to expand...
Click to collapse
Which hspl did you flash and which rom?

the new one for 1024 T-Mobile 2.08.
Thanks for all replies,
For the Microvawe version, if you smash it with a hammer, has the same effect. Go Green.
No kidding, I ask for a repair solution not a Brick it more.
Bootloader is not working at all, so no SD way as well. And a rom based on 1.66. Smart as I am, I deleted the file.
Like I said, HSPL was great. Was still working after that.

madman_nyc said:
For the Microvawe version, if you smash it with a hammer, has the same effect. Go Green.
No kidding, I ask for a repair solution not a Brick it more.
Click to expand...
Click to collapse
I laughed my ass off so hard at that comment!

So I got it exchanged, I did the Hard spl and its fine so far. Still working.
Dont want to brick it again,
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?

(post removed, wrong thread)

This is why I'm choosing to wait a little bit before jumping in and flashing my TMOUS HD2. I don't have the 'cajones' to be a guinea pig! I'm waiting until everything plays out and the process is tried and proven safe.
For now I'm enjoying the stock TMOUS Rom, and applying tweaks here and there. I'm running into bugs and annoyances here and there, but don't feel a strong urge to flash roms just yet...especially when so many others are having issues!

Yeah, when it comes to the software side of this phone, I just take it all in with the regular rom and see what I REALLY want out of it as far as options and whatnot. THEN I get to the rom goodies after a lot of review and feedback.
Hardware I'll dissect the guts if I have to anyday though.

FloatHeavy said:
Yeah, when it comes to the software side of this phone, I just take it all in with the regular rom and see what I REALLY want out of it as far as options and whatnot. THEN I get to the rom goodies after a lot of review and feedback.
Hardware I'll dissect the guts if I have to anyday though.
Click to expand...
Click to collapse
Yes, but still no answer for me ;-(
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?

madman_nyc said:
Yes, but still no answer for me ;-(
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?
Click to expand...
Click to collapse
I think you'd be much better off browsing all the thread titles in the ROM Development section looking for a rom that is [GER] and [2.08+]/TMOUS based
As long as it's been taken off a TMOUS device, it will work on your TMOUS device

madman_nyc said:
the new one for 1024 T-Mobile 2.08.
Thanks for all replies,
For the Microvawe version, if you smash it with a hammer, has the same effect. Go Green.
No kidding, I ask for a repair solution not a Brick it more.
Bootloader is not working at all, so no SD way as well. And a rom based on 1.66. Smart as I am, I deleted the file.
Like I said, HSPL was great. Was still working after that.
Click to expand...
Click to collapse
he he. I know it's hilarious. As I said, absolutely last resort if you are taking it back for warranty cos if they find any spl other than factory one your warranty is void straight off the bat. Nice to see you got a replacement without problems.
I just read that advice from another post here on the forum and it is way extreme!!!
As posted above - any rom based on tmous original roms should work. Good luck

madman_nyc said:
So I got it exchanged, I did the Hard spl and its fine so far. Still working.
Dont want to brick it again,
Is there any cooked German Rom that I can use on a USA T-Mobile HD2 based on 2.08?
To make my HD2 in German language?
Click to expand...
Click to collapse
YOU might use BSB Tweaks and choose manila language in the menu.
I bet it is based on the tool that downloads the needed manila files from the internet.
Try searching for the tool here on xda or use BSB tweak (but there is a solution to get it fully working german!)

[Q] HSPL

Hey guys, I got a question.
After installing HSPL, than I should get the cooked rom. What I'm getting is
Miri HD2 V18
After I run the CustomRUU it should update right?
What if anything happens while updating? This will brick the device.. Or if anything goes wrong, I can just plug it back in the PC, and click the customRUU again?
Also, can I flash it back to a official HTC Rom if I want to? or no after I use the HSPL. Edit: seems like I can't find the OFFICIAL HTC ROM from HTC site. It said it does not support Tmobile HTC HD2. Anyone mind giving it to me too? ^^
Please help, thanks!

Bump. If I install HSPL will I brick the phone of flashing rom failed?
Please help >< Sry for being noob

nitrogen618 said:
Hey guys, I got a question.
After installing HSPL, than I should get the cooked rom. What I'm getting is
Miri HD2 V18
After I run the CustomRUU it should update right?
Click to expand...
Click to collapse
yes
What if anything happens while updating? This will brick the device.. Or if anything goes wrong, I can just plug it back in the PC, and click the customRUU again?
Click to expand...
Click to collapse
so long as you can enter bootloader, all should be well
Also, can I flash it back to a official HTC Rom if I want to? or no after I use the HSPL. Edit: seems like I can't find the OFFICIAL HTC ROM from HTC site. It said it does not support Tmobile HTC HD2. Anyone mind giving it to me too? ^^
Please help, thanks!
Click to expand...
Click to collapse
STOP!
there are NO official HTC roms that work on the tmous. ONLY the t mobile us official roms from the t mobile website (or here) work.
ALL others WILL KILL your phone.
You can ONLY use tmous official roms, or cooked roms that say they are tmous compatible,

[WARNING][SOLVED] Installing New T-Mobile update for HD2 disables HSPL

T-mobile sent me a text this morning about a major update.... I fell for it! Once installed it try's to prevent custom ROM installs. I was unable to back to energy ROM see attatched pic

Didn't it just wipe your HSPL? Did you try and run HSPL3 again?

Boot loader still displays HSPL but will give it a shot. bastards!
Thanks

I don't know if the T-Mobile version use the same SPL version as the Europe/Asian on (SPL 3.03)
But if this is the case, there isn't a HSPL version who is compatible with the new SPL 3.03 version jet.
So don't use HSPL, and remove HSPL before installation of this Rom!!!

You are using a wrong CustomRUU Flashing utility.
Use the one specific for HD2.

Removed HSPL and re-applied before I saw post about incompatibility... yep does not work... no custom ROM for me for a while looks like

rselva_kr said:
You are using a wrong CustomRUU Flashing utility.
Use the one specific for HD2.
Click to expand...
Click to collapse
I am using the one that worked last night and is packaged with Energy... so if you have any suggestions on which one you might be reffering to would be much appreciated.

If you have removed HSPL, and you will install a custom Rom use the SSPL procedure to install custom Rom.
Like I mentioned before I can't test it fore you (Belgium device) but on the European version I can get custom Rom on this way! (by using SPL 3.03)
Hope this can help you out.

kurt-willems said:
If you have removed HSPL, and you will install a custom Rom use the SSPL procedure to install custom Rom.
Like I mentioned before I can't test it fore you (Belgium device) but on the European version I can get custom Rom on this way! (by using SPL 3.03)
Hope this can help you out.
Click to expand...
Click to collapse
Nada
Thanks for your help thus far... big time bummed... kicking myself!

awagner said:
I am using the one that worked last night and is packaged with Energy... so if you have any suggestions on which one you might be reffering to would be much appreciated.
Click to expand...
Click to collapse
Try with attached and let us know.
Also, try to post a screenshot of your boot screen. It may help for some solution.

I had no issues installing the T-Mobile rom, running Task29 and then flashing radio 2.15.50 and CleanEx Ultra custom rom.
I did this all via USB cable

CustomRUU same issue.. nothing new. here is my boot loader... BootloaderNew is the new Bootloader after installing new T-Mobile update

awagner said:
CustomRUU same issue.. nothing new. here is my boot loader... BootloaderNew is the new Bootloader after installing new T-Mobile update
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893

awagner said:
CustomRUU same issue.. nothing new. here is my boot loader... BootloaderNew is the new Bootloader after installing new T-Mobile update
Click to expand...
Click to collapse
Try HSPL3, & select to update to 2.08HSPL from scroll down list.
It may take longer but should work.
If no, then you may need to use SD card flashing method with your original regional ROM.

rselva_kr said:
Try HSPL3, & select to update to 2.08HSPL from scroll down list.
It may take longer but should work.
If no, then you may need to use SD card flashing method with your original regional ROM.
Click to expand...
Click to collapse
Any idea where I can get the original rom? Had one for the TP2 just bought the HD2 a few weeks ago and did not downloader the older rom... I have done all the following to no avail

nerdstrap said:
I had no issues installing the T-Mobile rom, running Task29 and then flashing radio 2.15.50 and CleanEx Ultra custom rom.
I did this all via USB cable
Click to expand...
Click to collapse
Weird that is working... flashing now... no go on Energy ROM... have to retry when it is up

I installed the update just fine. This is the official T-mob US update 3.14.531.1 with radio 2.15.x.x from here: http://support.t-mobile.com/doc/tm54430.xml?
you will be asked for your IMEI identifier.

zkid2010 said:
I installed the update just fine. This is the official T-mob US update 3.14.531.1 with radio 2.15.x.x from here: http://support.t-mobile.com/doc/tm54430.xml?
you will be asked for your IMEI identifier.
Click to expand...
Click to collapse
I can update just fine, but it's going back to custom that is the issue... I am able to go clean ultra but not back to Energy... hmmm

Seems to be 100 percent isolated to Energy ROM... Core Cell Evo and Clean EX both flash perfectly

awagner said:
Seems to be 100 percent isolated to Energy ROM... Core Cell Evo and Clean EX both flash perfectly
Click to expand...
Click to collapse
Have you tried an older Energy Rom it may just be the particular build on the one you are trying to use .