[Q] Update Problem - Huawei Ideos X5 U8800

Guys i m having a problem. I cannot upgrade to ICS Aurora.. I have a miui version with 32 kernel. I m going to flash on Official GB, but when it finishes, the phone is rebooting all the time.
What have to do..??

Staf1988i said:
Guys i m having a problem. I cannot upgrade to ICS Aurora.. I have a miui version with 32 kernel. I m going to flash on Official GB, but when it finishes, the phone is rebooting all the time.
What have to do..??
Click to expand...
Click to collapse
Boot into recovery (the official recovery is fine too) and make factory reset. After that reboot the phone.
That helped me when I was in your situation.

nagato.fm said:
Boot into recovery (the official recovery is fine too) and make factory reset. After that reboot the phone.
That helped me when I was in your situation.
Click to expand...
Click to collapse
I made that but nothing happens.. It s the first time a have this problem..

Staf1988i said:
I made that but nothing happens.. It s the first time a have this problem..
Click to expand...
Click to collapse
Try to flash official froyo and then gb (b517).

When i m flashing on Froyo it s ok.
When i m going to GB it stucks on the boot screen. Shows every time the Huawei logo, then rebboting and again the same..

Related

Is there a way to downgrade GB KERNEL?

Hi!
I accidentally installed GB Kernel and CM9 on my DEFY with green lens.
The camera is not working as we all know..
Is there any way I can downgrade the kernel and install CM9 with froyo kernel??
This is bothering me for some time, I was browsing the forum for ages, with no solution
Thanks for any help!:good:
did u just flash a file tiny file or did u flashed a sbf? i guess delete date in custom recovery if u did the first thing. not sure though..
How could you be so irresponsible? Always get all the information before trying anything. I think you can't downgrade.i
S3nt fr0m my D3fy/w1u1 GB st4BL3
regenboognl said:
did u just flash a file tiny file or did u flashed a sbf? i guess delete date in custom recovery if u did the first thing. not sure though..
Click to expand...
Click to collapse
This is the answer!
SBF Flash. Or wipe data/caché + CM7 (Froyo) Kernel flash.
Also check your bootloader version, that's not downgradeable :/.
nikola986 said:
Hi!
I accidentally installed GB Kernel and CM9 on my DEFY with green lens.
The camera is not working as we all know..
Is there any way I can downgrade the kernel and install CM9 with froyo kernel??
This is bothering me for some time, I was browsing the forum for ages, with no solution
Thanks for any help!:good:
Click to expand...
Click to collapse
by that you mean you installed the .zip of the GB kernal or you flashed one of the GB's SBF?
if you didnt flash SBF id recommend you to flash 3.4.2_179-002(only if your phone came stock with froyo), dont forget to full wipe before flash and just than start updating to CM9 from step1 again. I recommend you on eppy's build, its really good.
Cman41 said:
by that you mean you installed the .zip of the GB kernal or you flashed one of the GB's SBF?
if you didnt flash SBF id recommend you to flash 3.4.2_179-002(only if your phone came stock with froyo), dont forget to full wipe before flash and just than start updating to CM9 from step1 again. I recommend you on eppy's build, its really good.
Click to expand...
Click to collapse
I have installed the CM9 (for defy+ and red lence defy), and than the KERNEL for GB... (CM9 Kernel, GB, for DEFY+)
Thanks everyone for the info and replies!
ps.
Core version: 2.6.32.9-ge281b6e
nikola986 said:
I have installed the CM9 (for defy+ and red lence defy), and than the KERNEL for GB... (CM9 Kernel, GB, for DEFY+)
Thanks everyone for the info and replies!
ps.
Core version: 2.6.32.9-ge281b6e
Click to expand...
Click to collapse
what rom did you have before you tried installing cm9? stock froyo?
Cman41 said:
what rom did you have before you tried installing cm9? stock froyo?
Click to expand...
Click to collapse
CM 7
First perform a full wipe and then flash this SBF: http://sbf.droid-developers.org/umts_jordan/JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf.gz
You will be back to a froyo and than to install CM9 follow the steps here: http://forum.xda-developers.com/showthread.php?t=1756234
good luck
I have flashed the SBF you gave me.. It justs says: PASS.. I cannot start the phone..
RSD says that the bootloader version is 0910
Is there any solution??
nikola986 said:
I have flashed the SBF you gave me.. It justs says: PASS.. I cannot start the phone..
RSD says that the bootloader version is 0910
Is there any solution??
Click to expand...
Click to collapse
what do you mean? it just should have re booted into froyo.. are you stuck in some bootloop? if so did you wipe?
Cman41 said:
what do you mean? it just should have re booted into froyo.. are you stuck in some bootloop? if so did you wipe?
Click to expand...
Click to collapse
When I flash it with RSD Lite, It seems okey, it does the job, at the end it says PASS (on the PC in the app)
Then, I unplug the phone from the PC and try to power it, nothing happens.. I can plug it back to the RSD lite and it detects the phone so I can flash it again..
nikola986 said:
When I flash it with RSD Lite, It seems okey, it does the job, at the end it says PASS (on the PC in the app)
Then, I unplug the phone from the PC and try to power it, nothing happens.. I can plug it back to the RSD lite and it detects the phone so I can flash it again..
Click to expand...
Click to collapse
but didnt the phone boot normally into froyo? i suggest you not to unplug untill phone boots up. If you are stuck in boot loop go to stock recovery by: hold vol down+power up>wait until triangle with '!' mark appears>push vol down and up at the same time> wipe and reboot
The phone was flashed but it did not boot at all.. It cant be turned on after the flash is done.. it can be just reflashed again via cable
nikola986 said:
The phone was flashed but it did not boot at all.. It cant be turned on after the flash is done.. it can be just reflashed again via cable
Click to expand...
Click to collapse
if you just push the power button the phone is getting into bootloader mode? are you sure volume up isnt pressed somehow?
Cman41 said:
if you just push the power button the phone is getting into bootloader mode? are you sure volume up isnt pressed somehow?
Click to expand...
Click to collapse
The sreen is completely black, but I can flash it over the PC...
Well.. you should try flashing it again... and the phone should boot into froyo normally when you finish flashing.
Nearly at the end of the process you should see RSD lite telling you:"Phone is being rebooted" and percentage under the progress column, and if you look on your phone you will see it booting up(M logo, then Android logo and then froyo.. normally).
By the way:what was your stock build and if you dont know it, where are you from??
Cman41 said:
Well.. you should try flashing it again... and the phone should boot into froyo normally when you finish flashing.
Nearly at the end of the process you should see RSD lite telling you:"Phone is being rebooted" and percentage under the progress column, and if you look on your phone you will see it booting up(M logo, then Android logo and then froyo.. normally).
By the way:what was your stock build and if you dont know it, where are you from??
Click to expand...
Click to collapse
maybe he has a 2.3.6 sbf installed previously i had same problem cant downgrade i guess
Why did Motorola make that defy + -.-
Sent from my MB525 using xda app-developers app
gaimle said:
maybe he has a 2.3.6 sbf installed previously i had same problem cant downgrade i guess
Click to expand...
Click to collapse
i assumed he was on froyo since he had CM7
NI55AN said:
Why did Motorola make that defy + -.-
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Simple: To make bigger profit!
Thats why im not buying moto phone again mate. Though i love the cm9, i dont know what we would have done without it..

Defy wont boot!!!

Hi,
I was running CM10 on my defy and then i tried to update it with Quarx latest build and something went wrong....i was stuck at the motorola logo screen....
I used RSD Lite V5.3.1 to flash the stock rom to my defy and it still wont boot....its still stuck at the motorola logo....
Please help.....its booting only under the Bootloader mode (Power+Vol Up).....nothing else
Thanks
Shrewdy said:
Hi,
I was running CM10 on my defy and then i tried to update it with Quarx latest build and something went wrong....i was stuck at the motorola logo screen....
I used RSD Lite V5.3.1 to flash the stock rom to my defy and it still wont boot....its still stuck at the motorola logo....
Please help.....its booting only under the Bootloader mode (Power+Vol Up).....nothing else
Thanks
Click to expand...
Click to collapse
Did you flash the correct sbf?
How long are you stuck at the Motorola logo? Give a bit more information =P
It's most likely not bricked as it's almost impossible to brick the defy.. (I've never heard of it)
Please help
pk92 said:
Did you flash the correct sbf?
How long are you stuck at the Motorola logo? Give a bit more information =P
It's most likely not bricked as it's almost impossible to brick the defy.. (I've never heard of it)
Click to expand...
Click to collapse
Hi,
First i had upgraded to froyo and and used this link to get Gingerbread on my defy
http://forum.xda-developers.com/showthread.php?t=1285007
After that i installed many roms and the last one to be tried was CM10...which started all the problems...
I have now tried to flash rom from this link
http://forum.xda-developers.com/showthread.php?t=1386942
now it is booting up but now it is stuck with the animation screen....the phone actually does not start....
i know its something to do with the kernel but then i dont know which type of kernel to flash and how!!
Please help..
Let me know if you need any more information
Thank you....
Shrewdy said:
Hi,
First i had upgraded to froyo and and used this link to get Gingerbread on my defy
http://forum.xda-developers.com/showthread.php?t=1285007
After that i installed many roms and the last one to be tried was CM10...which started all the problems...
I have now tried to flash rom from this link
http://forum.xda-developers.com/showthread.php?t=1386942
now it is booting up but now it is stuck with the animation screen....the phone actually does not start....
i know its something to do with the kernel but then i dont know which type of kernel to flash and how!!
Please help..
Let me know if you need any more information
Thank you....
Click to expand...
Click to collapse
Red or Green Lens? Defy or Defy+?
If Red Lens then you can use Defy or Defy+ build straight from Froyo after installing 2nd init.
If Red Lens Defy with Defy+ build, you will need a battery fix
If Red Lens Defy with Defy build, nothing else needs to be installed
If Green Lens Defy, you can only use Defy build. Nothing else needs to be installed.
If Defy+ You can only use defy build, nothing else needs to be installed.
Download the defy/defy+ builds here:
http://forum.xda-developers.com/showthread.php?t=1768702
http://quarx2k.ru
There is also an SBF of CM10 here: http://forum.xda-developers.com/showthread.php?t=1691901
Thanks buddy
pk92 said:
Red or Green Lens? Defy or Defy+?
If Red Lens then you can use Defy or Defy+ build straight from Froyo after installing 2nd init.
If Red Lens Defy with Defy+ build, you will need a battery fix
If Red Lens Defy with Defy build, nothing else needs to be installed
If Green Lens Defy, you can only use Defy build. Nothing else needs to be installed.
If Defy+ You can only use defy build, nothing else needs to be installed.
Download the defy/defy+ builds here:
http://forum.xda-developers.com/showthread.php?t=1768702
http://quarx2k.ru
There is also an SBF of CM10 here: http://forum.xda-developers.com/showthread.php?t=1691901
Click to expand...
Click to collapse
i am downloading the CM10 sbf's for both Froyo and GB..
i will try to install each and will see which ones works for me....
Coz i have a defy and i think it is a red lense one.
But i had a GB kernel running on my defy....
I hope thinks get well with my defy....
Thanks, will update you as soon as something happens....
Nothing works
Shrewdy said:
i am downloading the CM10 sbf's for both Froyo and GB..
i will try to install each and will see which ones works for me....
Coz i have a defy and i think it is a red lense one.
But i had a GB kernel running on my defy....
I hope thinks get well with my defy....
Thanks, will update you as soon as something happens....
Click to expand...
Click to collapse
----------------
All hopes going down... I have flashed these sbf's from the link your provided but nothing works !!
1. Froyo-cm-10,JB.Quarx.30.07.build.Defyred/green.bl4.fixed'sbf NEW
2. A.2.3.6-cm-10,JB.Quarx-30.07build-Defy+/red fixed'sbf cm-10 bootanimation New
Infact i get an error at the bootloader itself Err: A5,70,00,00,23 (wonder whats that)
There is only 1 sbf that boots it up....but then my defy keep looping on the blur animation and never boots up....
SBF that works the most i got it from here
http://forum.xda-developers.com/showthread.php?t=966537
which was (4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage Thread)
This works and atleast it sort of tries to boot up....
Also if i try to get into the recovery mode (Power + Vol Down)....i cannot see any options in recovery....just the small android exclamation image !!
Can you please help and get me atleast booted up till recovery ??
Thanks
Shrewdy said:
----------------
All hopes going down... I have flashed these sbf's from the link your provided but nothing works !!
1. Froyo-cm-10,JB.Quarx.30.07.build.Defyred/green.bl4.fixed'sbf NEW
2. A.2.3.6-cm-10,JB.Quarx-30.07build-Defy+/red fixed'sbf cm-10 bootanimation New
Infact i get an error at the bootloader itself Err: A5,70,00,00,23 (wonder whats that)
There is only 1 sbf that boots it up....but then my defy keep looping on the blur animation and never boots up....
SBF that works the most i got it from here
http://forum.xda-developers.com/showthread.php?t=966537
which was (4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage Thread)
This works and atleast it sort of tries to boot up....
Also if i try to get into the recovery mode (Power + Vol Down)....i cannot see any options in recovery....just the small android exclamation image !!
Can you please help and get me atleast booted up till recovery ??
Thanks
Click to expand...
Click to collapse
I believe that little android guy is the stock recovery. From what I remember you hold both volume buttons and it takes you into stock recovery.
Unfortunately, you will no longer have 2nd init installed, which allows for CWM recovery, so you can't flash a zip from there.
How long does it stay stuck on the blur logo? Maybe you're just not waiting long enough? (Stupid question I know, but some people complain after 2 minutes, the first boot can take a long time!)
Try looking at This thread and see if the link which is in this post will work to download the Taiwanese SBF. For me it doesn't seem to load
Edit: - Oh the Taiwanese SBF did eventually download. Took about 5 minutes with the tab open loading. I've uploaded it to my Dropbox so you can download from there... should be a bit faster!
JRDNEM_U3_3.4.3-33-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B50AA03A.0R_PDS03C_USAJRDNFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz
(MD5 - 34E9A43EAB8D2FF6101536C4B3F104BD)
Note: This is Taiwanese, NOT CHINESE. The Chinese one burns out the flashlight and it cannot be used after that.
Still stuck
pk92 said:
I believe that little android guy is the stock recovery. From what I remember you hold both volume buttons and it takes you into stock recovery.
Unfortunately, you will no longer have 2nd init installed, which allows for CWM recovery, so you can't flash a zip from there.
How long does it stay stuck on the blur logo? Maybe you're just not waiting long enough? (Stupid question I know, but some people complain after 2 minutes, the first boot can take a long time!)
Try looking at This thread and see if the link which is in this post will work to download the Taiwanese SBF. For me it doesn't seem to load
Edit: - Oh the Taiwanese SBF did eventually download. Took about 5 minutes with the tab open loading. I've uploaded it to my Dropbox so you can download from there... should be a bit faster!
JRDNEM_U3_3.4.3-33-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B50AA03A.0R_PDS03C_USAJRDNFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz
(MD5 - 34E9A43EAB8D2FF6101536C4B3F104BD)
Note: This is Taiwanese, NOT CHINESE. The Chinese one burns out the flashlight and it cannot be used after that.
Click to expand...
Click to collapse
Thanks for helping me out....
The motorola logo stays around for 20 seconds after with the Motorola boot animation starts.....
So i left my defy on for around 20 mins and nothing is happening its still playing the boot animation. !!
I havent yet downloaded the sbf link you have given me as i am at work now and will be able to do that only when i reach home.
Another thing i have noticed is that i am able to charge my defy....that means the rom is present and hopefully working !!
What say....???
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Euro your awesome!!
Euro_Rules said:
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Click to expand...
Click to collapse
Hi buddy,
Thanks yaar...i did exactly you told me to and the phone booted normally...
thanks a million buddy...:good::good:
And i also owe a million thanks to pk92...you have been there when i need you the most buddy....:good::good::good:
Thanks...m so happy to see my defy come back to life... :laugh::laugh::laugh::laugh:
O god!! its been a tough time but i learnt something new too....
Thanks guys :laugh:
friend request !!
hi, pk92 & euro
i have sent you friend request...do accept if you like !!
Thanks guys...
Shrewdy said:
Hi buddy,
Thanks yaar...i did exactly you told me to and the phone booted normally...
thanks a million buddy...:good::good:
And i also owe a million thanks to pk92...you have been there when i need you the most buddy....:good::good::good:
Thanks...m so happy to see my defy come back to life... :laugh::laugh::laugh::laugh:
O god!! its been a tough time but i learnt something new too....
Thanks guys :laugh:
Click to expand...
Click to collapse
Hehehehehehehehe
You are Welcom Shrewdy
Say thanks to our awesome XDA developer's Because of them we are nothing...
Shrewdy said:
hi, pk92 & euro
i have sent you friend request...do accept if you like !!
Thanks guys...
Click to expand...
Click to collapse
Accepted :highfive:
Guys I have the same problem.
Phone was upgraded from Froyo to CM7 and took it fine. Played for a while in CM7 but decided to upgrade to CM10.
Followed the steps from this thread http://forum.xda-developers.com/showthread.php?t=1795647
flashed foryo Kernel
Flashed CM10-20120924-NIGHTLY-mb525.zip
Flashed Google apps
Cleared cache, cleared Dalvik
Phone boots but gets stuck at Motorola logo and after blue and green light it loops back again to the same sequence.
It's a Defy with green lens and it had stock T-Mobile Froyo (rooted) before flash to CM7.
I'm now back to CM7 as CM10 didn't want to work.
sorry didnt get you
czarekusa said:
Guys I have the same problem.
Phone was upgraded from Froyo to CM7 and took it fine. Played for a while in CM7 but decided to upgrade to CM10.
Followed the steps from this thread http://forum.xda-developers.com/showthread.php?t=1795647
flashed foryo Kernel
Flashed CM10-20120924-NIGHTLY-mb525.zip
Flashed Google apps
Cleared cache, cleared Dalvik
Phone boots but gets stuck at Motorola logo and after blue and green light it loops back again to the same sequence.
It's a Defy with green lens and it had stock T-Mobile Froyo (rooted) before flash to CM7.
I'm now back to CM7 as CM10 didn't want to work.
Click to expand...
Click to collapse
hey buddy...m sorry i didnt quite get you....
As per my understanding i believe your phone is working fine with CM7 installed and you want to install CM10 on your defy !!
am i correct !!
if you then let me make it clear that the latest CM10 build used a custom kernel made by quarx himself....it is not running a froyo or gb kernel...
so here is what you need to do....
1. simply factory reset your phone...clear cache and dalvik...
2. now flash the latest CM10 build
3. again...clear cache and dalvik...
4. and now let defy boot....first boot may take a longer time....
hope this works for u...if it does not...let me know...will b glad to help u...
Thanks
Shrewdy said:
hey buddy...m sorry i didnt quite get you....
As per my understanding i believe your phone is working fine with CM7 installed and you want to install CM10 on your defy !!
am i correct !!
if you then let me make it clear that the latest CM10 build used a custom kernel made by quarx himself....it is not running a froyo or gb kernel...
so here is what you need to do....
1. simply factory reset your phone...clear cache and dalvik...
2. now flash the latest CM10 build
3. again...clear cache and dalvik...
4. and now let defy boot....first boot may take a longer time....
hope this works for u...if it does not...let me know...will b glad to help u...
Thanks
Click to expand...
Click to collapse
Yes, you are correct. the phone is working fine with CM7.
Factory reset, you mean from boot menu or the hard factory reset with holding volume keys (procedure posted above in this thread)?
The first time I actually tried, I did flash of CM10 without the prior kernel flash and it didn't work either.
so do I need any kernel flash or do I just flash it with CM10 and it should work?
I'll try again later today or tomorrow.
Thanks
czarekusa said:
Yes, you are correct. the phone is working fine with CM7.
Factory reset, you mean from boot menu or the hard factory reset with holding volume keys (procedure posted above in this thread)?
The first time I actually tried, I did flash of CM10 without the prior kernel flash and it didn't work either.
so do I need any kernel flash or do I just flash it with CM10 and it should work?
I'll try again later today or tomorrow.
Thanks
Click to expand...
Click to collapse
Lots of us who had bootloops trying to flash CM10 24/09 with a BL5 base SBF solved the problem by flashing a BL6 base Froyo SBF.
But try a factory reset and flashing your stock T-Mobile Froyo first.
If your stock doesn't flash properly then it means you have inadvertently flashed something which updated your BL version to BL5.
I flashed the JDGC_U6.2.13.0 SBF which is BL6 and then I was fine.
Don't use this ROM though, just use it as a stepping-stone to install CM10.
Euro_Rules said:
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Click to expand...
Click to collapse
Thanks a lottt.. :highfive:

[Q] Please help, phone dont boot

my L7 stucks on lg logo , while booting on, im so worried
1. I flashed v20d (rooted,unclocked,cwm) from non rooted v20d (with KDZ)
2. I flashed AOKP rom, and yeah what a suprise there are no singal
3. I tried to flash back v20d (KDZ) and everything went succes, but then it doesnt boot on
4. I installed non rooted v20d with LG support tool, everything succes, and the same, wont boot on
please help, what should i do, i waited longer that half hour and it doesnt boot on
sorry for bad english
faters said:
my L7 stucks on lg logo , while booting on, im so worried
1. I flashed v20d (rooted,unclocked,cwm) from non rooted v20d (with KDZ)
2. I flashed AOKP rom, and yeah what a suprise there are no singal
3. I tried to flash back v20d (KDZ) and everything went succes, but then it doesnt boot on
4. I installed non rooted v20d with LG support tool, everything succes, and the same, wont boot on
please help, what should i do, i waited longer that half hour and it doesnt boot on
sorry for bad english
Click to expand...
Click to collapse
Flash a rooted stock rom using kdz(suggest v20d rooted,search general forum)...then before first boot,go to recovery mode(cwm) and wipe data/cache/dalvik..then reboot..
It will work
RootYourPhoneHD said:
Flash a rooted stock rom using kdz(suggest v20d rooted,search general forum)...then before first boot,go to recovery mode(cwm) and wipe data/cache/dalvik..then reboot..
It will work
Click to expand...
Click to collapse
Ok i will try, but how to go to recovery? (all the time I went through Rom manager)
im worried that i killed the bootloader :S
faters said:
Ok i will try, but how to go to recovery? (all the time I went through Rom manager)
im worried that i killed the bootloader :S
Click to expand...
Click to collapse
Dont worry..just press vol+,vol-,home button and power button.When phone vibrates leave them all you will boot into recovery..
RootYourPhoneHD said:
Dont worry..just press vol+,vol-,home button and power button.When phone vibrates leave them all you will boot into recovery..
Click to expand...
Click to collapse
whoah, thanks a lot man your my hero
faters said:
whoah, thanks a lot man your my hero
Click to expand...
Click to collapse
My pleasure :highfive:

Brick? Hardware/Software bug?

Hi guys,
Yesterday, i turned off my device to sleep. When i turnet it on, it restart 3 times in sequence, than i take off battery , waited 1min e turned on again. But, it wasnt load OS, it freezed at Samsung logo.
So i decided to try restore the custom room (Google Edition), but i cant entered at cwm recovery, freezed downloading mode screen. Than i tried to flash with odin cwm again. Flash sucessfully but could not load cwm.
Than im started to getting panic, nervous and patience gone. I downloaded from sammobile the stock room and flash with odin. It isnt work again. After flash, the phone boot and freeze for loooooong time at screen with blue text recovering boot and Samsung logo.
I tried from KIES too, but have no sucess...
I dont know what I must have to do anymore. My ideas, knowlodge are now over. Is that any possible about triangle way cause this ? My device doesnt boot anymore. Always freezing screen. I waited for many minutes, like 20minutes and nothing.
Files that i downloaded:
- I9505_VJUBMG3_STOCK_RECOVERY.tar.md5
- I9505VJUBMG3_STOCK_KERNEL.tar.md5
- I9505VJUBMG3-PRE-ROOTED-ODEX-FULL.tar.md5
- I9505VJUAMDM_I9505ZTOAMDM_I9505VJUAMDM_HOME.tar.md5
- and Philz recovery, CWM recovery.
Guys, what really happened?
funny thing
tha same happened to me last week.
I fixed it by downloading another version of Stock Rom for s4 and flashing it with odin.
The stock rom I used had only 1 file (1.7gb) and flashed it using only the pda button.
maybe it will work for you also.
oh and by the way
I used team win recovery project instead of CWM recovery
j1miroquai said:
funny thing
tha same happened to me last week.
I fixed it by downloading another version of Stock Rom for s4 and flashing it with odin.
The stock rom I used had only 1 file (1.7gb) and flashed it using only the pda button.
maybe it will work for you also.
oh and by the way
I used team win recovery project instead of CWM recovery
Click to expand...
Click to collapse
I9505VJUAMDM_I9505ZTOAMDM_I9505VJUAMDM_HOME.tar.md 5 this is a stock room, 1.7gb. After i flashed this, it freezed at Samsung Logo with blue text recovering boot
i will try team win recovery too.
Man what else you did to fix it? im going for 2nd day without mobile...
I used this one
hxxp://hotfile.com/dl/231752980/98f5969/EUR-I9505XXUBMEA-20130624154055.zip.html
it's a stock Greek Rom (I'm from Greece )
I just installed it via odin 3.07 , placed the rom on the pda button and that`s it.
after that I installed team win recovery project via Odin again .(and again on the pda button)
the link is this one hxxp://teamw.in/project/twrp2/182
hope it will help you
j1miroquai said:
I used this one
hxxp://hotfile.com/dl/231752980/98f5969/EUR-I9505XXUBMEA-20130624154055.zip.html
it's a stock Greek Rom (I'm from Greece )
I just installed it via odin 3.07 , placed the rom on the pda button and that`s it.
after that I installed team win recovery project via Odin again .(and again on the pda button)
the link is this one hxxp://teamw.in/project/twrp2/182
hope it will help you
Click to expand...
Click to collapse
Yeah, i think my problem isnt the room, because i have 2 here, one default from sammbile and other I9505VJUBMG3-PRE-ROOTED-ODEX-FULL.tar.md5
My problem is after flash the room, it isnt boot. It stop at Samsung logo with blue text recovering boot. How long did you waited for this? Or you just disconnect cable after reboot and flash again to teamwin ?
GuiCunha said:
Yeah, i think my problem isnt the room, because i have 2 here, one default from sammbile and other I9505VJUBMG3-PRE-ROOTED-ODEX-FULL.tar.md5
My problem is after flash the room, it isnt boot. It stop at Samsung logo with blue text recovering boot. How long did you waited for this? Or you just disconnect cable after reboot and flash again to teamwin ?
Click to expand...
Click to collapse
Flash the new Brazilian rom with odin ( http://www.hotfile.com/dl/234152687/723aa16/I9505VJUBMG3_I9505ZTOBMG3_ZTO.zip.html ).
Wait reboot. Power off, and reboot in recovery mode, wipe data + cache (Vol Up+Home+Power).
The first time, you need wait a lot of time (1~20 minutes).
RATOz said:
Flash the new Brazilian rom with odin ( http://www.hotfile.com/dl/234152687/723aa16/I9505VJUBMG3_I9505ZTOBMG3_ZTO.zip.html ).
Wait reboot. Power off, and reboot in recovery mode, wipe data + cache (Vol Up+Home+Power).
The first time, you need wait a lot of time (1~20 minutes).
Click to expand...
Click to collapse
Ok, i did. Waiting recovering boot....
GuiCunha said:
Ok, i did. Waiting recovering boot....
Click to expand...
Click to collapse
Did you try what I've told you?
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT
dandroid13 said:
Did you try what I've told you?
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT
Click to expand...
Click to collapse
Yes buddy, but that room is flashable with recovery mode and i cant entered into recovery. Or i made a mistake and download the wrong room?
GuiCunha said:
Yes buddy, but that room is flashable with recovery mode and i cant entered into recovery. Or i made a mistake and download the wrong room?
Click to expand...
Click to collapse
That was a Odin file...
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT
dandroid13 said:
That was a Odin file...
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT
Click to expand...
Click to collapse
OMG!
Give me the download link please! I've downloaded a lot, lot of links...
Please. I pay you a beer soon.
RATOz said:
Flash the new Brazilian rom with odin ( http://www.hotfile.com/dl/234152687/723aa16/I9505VJUBMG3_I9505ZTOBMG3_ZTO.zip.html ).
Wait reboot. Power off, and reboot in recovery mode, wipe data + cache (Vol Up+Home+Power).
The first time, you need wait a lot of time (1~20 minutes).
Click to expand...
Click to collapse
Are you sure that it delays 20 minutes?
Tried entering recovery with TWRP?
I think there is something before enter recovery system. That is my problem.
GuiCunha said:
I think there is something before enter recovery system. That is my problem.
Click to expand...
Click to collapse
But you should try it too!
dandroid13 said:
But you should try it too!
Click to expand...
Click to collapse
I've alredy tried. :\
Thanks anyway.
GuiCunha said:
I've alredy tried. :\
Thanks anyway.
Click to expand...
Click to collapse
TWRP isn't CWM, didn't see you mention it yet.
Today i must to give up, because time is against me. I leave the device at samsung assistence. Lets see what they will say for me.
I dont have screenshots, but im sure that i follow all those steps correctly. I tried many ways with odin, ticking unticking things, step by step.
By the way, im so happy with all here tried to help me. The beautifull word that i can say is Thanks, thanks guys!
Weird think: Switching from S4 for X10 is a punishment! My old and warrior X10 have no more battery life, like a mini screen now, slow cpu... but its ok, is better than my x810i.
Thank You guys (all people that help me), for everything.

[Q] GT-I9505 with CM10.2 Bootup Sometimes Hang Issue

Dear all,
I followed the CM webpage wiki to install the latest stable ver 10.2 on my S4 i9505.
Heimdall in download mode to install CWM
then boot into CWM to flash CM10.2
It didn't went smooth at start so I did a few times with the Heimdall and flash CM10.2 a few times.
Now everything works except once a while when reboot the Bootup screen hangs there before entering the CM loop logo. It only happen once a while and need to long press power button to reboot. There was once the 2nd reboot also hang there.
Any idea what's the possible cause and how to fix it?
Thanks a lot.
phileasx said:
Dear all,
I followed the CM webpage wiki to install the latest stable ver 10.2 on my S4 i9505.
Heimdall in download mode to install CWM
then boot into CWM to flash CM10.2
It didn't went smooth at start so I did a few times with the Heimdall and flash CM10.2 a few times.
Now everything works except once a while when reboot the Bootup screen hangs there before entering the CM loop logo. It only happen once a while and need to long press power button to reboot. There was once the 2nd reboot also hang there.
Any idea what's the possible cause and how to fix it?
Thanks a lot.
Click to expand...
Click to collapse
revert to stock rom and then flash cwm and then latest cm 10.2 and have fun :good::laugh:
aditya rathee said:
revert to stock rom and then flash cwm and then latest cm 10.2 and have fun :good::laugh:
Click to expand...
Click to collapse
Thank you for the reply. I doubt that can solve the issue..
Could this be related to knox bootloader? I checked I got this void line 0x1 in download mode.
phileasx said:
Thank you for the reply. I doubt that can solve the issue..
Could this be related to knox bootloader? I checked I got this void line 0x1 in download mode.
Click to expand...
Click to collapse
no i don't think that may be a problem
try me method if that does not help then again tell me
aditya rathee said:
no i don't think that may be a problem
try me method if that does not help then again tell me
Click to expand...
Click to collapse
I think I might figured out the problem.
Might because I didn't do properly during rom flash. I forgot to wipe the system when flash cyanogenmod.
Could be because of this. I've switched to a different rom now, so won't be able to verify until decide switch back to cyanogen.
phileasx said:
I think I might figured out the problem.
Might because I didn't do properly during rom flash. I forgot to wipe the system when flash cyanogenmod.
Could be because of this. I've switched to a different rom now, so won't be able to verify until decide switch back to cyanogen.
Click to expand...
Click to collapse
so is everything all right now ??
aditya rathee said:
so is everything all right now ??
Click to expand...
Click to collapse
Yes, the bootup process is smooth, so far so good now. Quite happy with the new rom also
phileasx said:
Yes, the bootup process is smooth, so far so good now. Quite happy with the new rom also
Click to expand...
Click to collapse
well buddy enjoy and if have some problem ask me or pm me
have fun :laugh::good:

Categories

Resources