So apparently I have two different versions of ClockWorkMod Recovery on my Droid X. ROM manager says I have 5.0.2.0, but when I reboot into Recovery (via ROM Manager, or manually) it boots into CWM 2.5.0.8. I can then Flash the 5.0.2.0 zip, and use it normally, I just can't boot directly into it. I recently got a replacement Droid X off ebay because my screen developed a huge black blob in it, but it didn't have the same CWM weirdness going on..
Is there any way to get rid of the 2.5.0.8? Everything works correctly once I flash into 5.0.2.0, but it would be nice to be able to get there directly.
TIA
bump?
Anyone?
same here
Hello i have the same issue just by me i cant do any thing in recovery it will just always go to a blank screen in rom manger it will show 5.0.....
in recovery it shows 2.0....
pls help will love you for ever :crying:
Regarding droid x cwm
IndyRoadie said:
So apparently I have two different versions of ClockWorkMod Recovery on my Droid X. ROM manager says I have 5.0.2.0, but when I reboot into Recovery (via ROM Manager, or manually) it boots into CWM 2.5.0.8. I can then Flash the 5.0.2.0 zip, and use it normally, I just can't boot directly into it. I recently got a replacement Droid X off ebay because my screen developed a huge black blob in it, but it didn't have the same CWM weirdness going on..
Is there any way to get rid of the 2.5.0.8? Everything works correctly once I flash into 5.0.2.0, but it would be nice to be able to get there directly.
TIA
Click to expand...
Click to collapse
i think it has something to do with bootstrap did you try using 2.5.0.8 not sure but i think you should be able to use it the same as 5.0.2.0
tzvblsm said:
i think it has something to do with bootstrap did you try using 2.5.0.8 not sure but i think you should be able to use it the same as 5.0.2.0
Click to expand...
Click to collapse
Both work, just you can't Restore backups made in 5.0.2.0, using 2.5.0.8.. So ever time I want to do a Back Up, or a Restore, I boot into Recovery and it loads 2.5.0.8, then I flash 5.0.2.0, then run my Back Up or Restore..
It all works, it's just a pain..
Simple solution
IndyRoadie said:
Both work, just you can't Restore backups made in 5.0.2.0, using 2.5.0.8.. So ever time I want to do a Back Up, or a Restore, I boot into Recovery and it loads 2.5.0.8, then I flash 5.0.2.0, then run my Back Up or Restore..
It all works, it's just a pain..
Click to expand...
Click to collapse
Why don't you Boot in to recovery and backup from recovery instead of ROM manger to my understanding that will solve all your problems.
if i helped hit the thanks button
tzvblsm said:
Why don't you Boot in to recovery and backup from recovery instead of ROM manger to my understanding that will solve all your problems.
if i helped hit the thanks button
Click to expand...
Click to collapse
That's what I am doing.. Any way I get into Recovery, by booting directly into it, or via ROM Manager, it boots into 2.5.0.8.
Got it worked out, thanks to this thread..
http://forum.xda-developers.com/showthread.php?t=2133052&page=2
Related
I'm trying to make a nandroid backup so I can mess with my droid 2 but having issues...
The phone is rooted.
Have Installed: Rom Manager and Droid 2 Bootstrapper - both 'green' in superuser permissions.
When I try to boot into recovery mode using Rom Manager (trying to make a backup) or the D2 Bootstrapper the phone just boots up as it normally would. I can get into the default recovery mode by using the 'X' and 'PWR' key combo but that's not what I need.
Have tried renaming these files as suggested here in another thread and reflashing clockworkmod but that didn't work.
EDIT: can't link so these are the two files:
/system/etc/install-recovery.sh
/system/recovery-from-boot.p
Any ideas?
Meh... nvm - I figured it out.
Help!
Hey, my friend has the SAME EXACT issue. what did you do to fix it?
Everyone says to reinstall clockwork, but that doesn't fix it.
sonok said:
Hey, my friend has the SAME EXACT issue. what did you do to fix it?
Everyone says to reinstall clockwork, but that doesn't fix it.
Click to expand...
Click to collapse
I've never used ROM manager because koush's D2 bootstrap does everything you need. But if you don't get clockwork from the application make sure you are properly rooted and you press "bootstrap recovery" and get the "success" box before you press "reboot recovery".
newk8600 said:
I've never used ROM manager because koush's D2 bootstrap does everything you need. But if you don't get clockwork from the application make sure you are properly rooted and you press "bootstrap recovery" and get the "success" box before you press "reboot recovery".
Click to expand...
Click to collapse
My friend is using Rom manager. He installed CWM via rom manager. Do you think it is safe for him to get "Koush's D2 bootstrap" and re-install CWM that way? Will that break anything?
PS: I use Amon_Ra's recovery on my nexus one. I do all my installations via ADB but he is not comfortable using ADB. I'm just trying to get him into a stable custom recovery because ever since he installed clockwork (which is not working) he says the phone is really slow.
sonok said:
My friend is using Rom manager. He installed CWM via rom manager. Do you think it is safe for him to get "Koush's D2 bootstrap" and re-install CWM that way? Will that break anything?
PS: I use Amon_Ra's recovery on my nexus one. I do all my installations via ADB but he is not comfortable using ADB. I'm just trying to get him into a stable custom recovery because ever since he installed clockwork (which is not working) he says the phone is really slow.
Click to expand...
Click to collapse
I don't know installing koush's bootstrap will do but the D2 has to be bootstrapped because it's locked down and normal Clockwork Mod won't work because of it. If it doesn't work and his phone isn't working he can just SBF with the 2.3.2 version (he probably has the update already) he can do it in linux or windows (linux is easier) and it will put him back to stock so he can install koush's bootstrap from the market after re-rooting it.
If he want's he can back up his contacts and applications with google and data with titanium backup.
You can PM me if you have any questions about the process.
Here's my tool for flashing sbf's in linux on any computer. It's got a lot of useful info about flashing and problems at the bottom read it even if you flash in windows.
I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
highrolla1866 said:
I checked through 100s of post tonight and could not find the answer to this and am in need of some help. I attempted to install a Cyanogen Nightly tonight through Rom Manager with no prior knowlege of the issues with CW 2.5 vs. CW 3.0. Stupid I know.
So natuaraly, when the download finished and Rom Manager tried to install, my MT4G just hung at the white boot screen. Through previous posts, the directions were simple to reflash the previous CW Recovery through Fastboot and reflash the Rom.
Well thats where the problem is.... When I attempt to flash ANY Rom earlier than 3.0.0.5, it will say OKAY in CMD, however the phone will never boot into the Recovery. I even tried fastboot erase recovery then reinstalled and still nothing.
So i decided to go a different root and reinstalled 3.0.0.5 to see if there was any work around through there. After i install 3.0 through Fastboot, I am able to go into Recovery, however when I select ANY option no matter what, the hat and the gear icon stay in the background and nothing happens.
I am very confused and lost and am hoping someone here will have had the same issue and can help me get my phone back in order.
Thanks in advance guys!
Click to expand...
Click to collapse
I havent had that issue exactly, but I might be able to help wlk you through getting this fixed. Ive had problems more than once myself on recovery, and helped a couple others solve other issues on here. If you want, add me on google talk (same username as on xda), and Ill walk you through it. Might have to wait till the morning, though, as Im probably gonna head to bed soon.
Fastboot 2.5 recovery and reflash froyo rom. If you decide to install CM7 again - read,search and make sure that you understand what you're doing. It has been stated at least few dozen times that Rom Manager is useless with gingerbread until Koush updates it.
Same Issue??
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
fosunite said:
I also have the similar problem. I have installed the Clockworkmod 3.0.0.5 and have rooted my phone before i was trying to install the gingerbread version. I made a recovery backup. i tried to restore the phone with that backup image but it still hung up with that "t-mobile mytouch " white splash screen.
What should i do now ? i have no idea how to bring my phone back to life :/
Click to expand...
Click to collapse
Jmg90300zx said:
I believe my issue sounds similar.
I tried to go from Iced Glacier up to CM7. When I did I attempted to use the Clockwork Recovery 2.5 and of course it didn't work. Then I tried to upgrade it to 3.0.0.5. Now when I try to reboot into Clockwork recovery the phone just stays on the MyTouch 4G splash screen. The only way to get around it is use the Power/Volume down button and click on FASTBOOT and then select REBOOT.
The phone then boots in Iced Glacier. I have redownloaded ROM Manager and attempted to FLASH CLOCKWORKMOD RECOVERY. But it still won't load into recovery.
Essentially I need some step by step help to get back to clockworkmod recovery. I'm not too worried if I need to wipe everything. Just looking for the ability to restore again.
Alternatively I'm interested in upgrading to CM7 but not sure how I could do that without recovery working. I would also ask if you can give step by step instructions it would be much appreciated as I'm still pretty new to this.
Thanks!
Click to expand...
Click to collapse
Sounds like both of you should of never of done this. This has been discussed a few times, and the end result is always the same.....
Download the correct Recovery image (which can be found in the Development section) and install it to your phone by using the ADB commands, in the fastboot mode. you can find a quick and painless way to set those up in my signature. Once you have installed the recovery image you can boot into hBoot and select recovery. from there you can flash CM7 and the gapps. Once you have done all that download the official clockwork ROM manager from the market and flash his current recovery image.
Hi, I have rooted my phone and have s off. I've purchased rom manager and installed clockworkmod 3 and have backed up my phone.
When I try to flash the latest cyanogenMod Nightly I run into problems.
The phone gets wiped and updates and then it gets stuck at the Tmobile my touch splash screen. I've left it there for 10 minutes and still no cyanogen.
Any help is greatly appreciated
Thanks
Also I'm able to go back into recovery mode and restore my backup. So my phone is currently back in stock rom.
AnroidGuy2011 said:
Hi, I have rooted my phone and have s off. I've purchased rom manager and installed clockworkmod 3 and have backed up my phone.
When I try to flash the latest cyanogenMod Nightly I run into problems.
The phone gets wiped and updates and then it gets stuck at the Tmobile my touch splash screen. I've left it there for 10 minutes and still no cyanogen.
Any help is greatly appreciated
Thanks
Click to expand...
Click to collapse
If you successfully backed up your phone you are not using Clockwork ROM Recovery 3.x. It's a well known fact that that Recovery image has problems backing up Nandroids, or restoring them for that matter.
What color was the text when you were in recovery? Orange or green?
Its Green, so I have clockworkMod Recovery 2.5.1.2
So I need to update to the 3.x and I should be good?
Also to do a successfull back up of my nandroid I go to "backup and restore" and then select "backup"?
Thanks again for your help
AnroidGuy2011 said:
Its Green, so I have clockworkMod Recovery 2.5.1.2
So I need to update to the 3.x and I should be good?
Also to do a successfull back up of my nandroid I go to "backup and restore" and then select "backup"?
Thanks again for your help
Click to expand...
Click to collapse
if you are wanting CM7 yes you need to flash Clockwork ROM 3.0 via the Fastboot ADB commands. If you are wanting your phone to work you can flash of any of the other ROMS as of right now.
Clockwork ROM 3.x will not do nandroid back ups in it's current state. As Gingerbread comes closer to being an official or RC i'm sure they make sure it can do nandroids. nor will 2.x do nandroids of CM7. but to answer your question you are correct.
AnroidGuy2011 said:
Its Green, so I have clockworkMod Recovery 2.5.1.2
So I need to update to the 3.x and I should be good?
Also to do a successfull back up of my nandroid I go to "backup and restore" and then select "backup"?
Thanks again for your help
Click to expand...
Click to collapse
You are correct. See my thread here For the easiest way to install 3.0.0.5. And yes you can use Rom Manager for backups while on 2.5.1.2 but Rom Manager isnt compatable with flashing or backups for 3.0.0.5. You must use recovery.
TrueBlue_Drew said:
You are correct. See my thread here For the easiest way to install 3.0.0.5. And yes you can use Rom Manager for backups while on 2.5.1.2 but Rom Manager isnt compatable with flashing or backups for 3.0.0.5. You must use recovery.
Click to expand...
Click to collapse
This is good. Every time I try to answer a thread, you seem to beat me to it.
Thanks for the help
neidlinger said:
Clockwork ROM Recovery 3.x. It's a well known fact that that Recovery image has problems backing up Nandroids, or restoring them for that matter.
Click to expand...
Click to collapse
I rooted, made a back up with Clockwork ROM Recovery 3.x. , flashed CM7 and everything was fine. Then I flashed Kernel_2.6.32.27grankin01-CM-GB-OC-v0.09 and when I unlocked the screen everything started force closing on a black screen. I locked the screen again, powered off and on again then it got stuck on the splash screen. I restored my back up and it's stuck on splash screen still. Then I tried to flash Kernel 2.6.32.21grankin010OC0v0.05 thinking my back-up might need a stock kernel. I am a super noob at this, I have successfully flashed roms to my tab before, but I've only been learning about this for about a month. I've been searching and searching but can't seem to find a solution. Am I screwed?
igrillem said:
I rooted, made a back up with Clockwork ROM Recovery 3.x. , flashed CM7 and everything was fine. Then I flashed Kernel_2.6.32.27grankin01-CM-GB-OC-v0.09 and when I unlocked the screen everything started force closing on a black screen. I locked the screen again, powered off and on again then it got stuck on the splash screen. I restored my back up and it's stuck on splash screen still. Then I tried to flash Kernel 2.6.32.21grankin010OC0v0.05 thinking my back-up might need a stock kernel. I am a super noob at this, I have successfully flashed roms to my tab before, but I've only been learning about this for about a month. I've been searching and searching but can't seem to find a solution. Am I screwed?
Click to expand...
Click to collapse
IMHO opinion you are not screwed.
When flashing custom Kernels you need to have a program like SetCPU so you can govern the CPU speed. To fast of a speed or to slow of a speed and it will not boot correctly. You need to flash a different version of CM7 than you are using now, via the recovery screen. make sure to wipe the handset first. that should reset the Kernel to one that Zinx knows works with the phone.
As well i wouldn't recommend flashing kernels with Nightlies. They are unstable as it. and you need to make sure the kernel is compatible with Nightly you are using. And you can over clock them to 1.5Ghrzf from w/ in the ROM.
neidlinger said:
make sure to wipe the handset first. that should reset the Kernel to one that Zinx knows works with the phone.
Click to expand...
Click to collapse
HHHmmm I'm glad I never forget this step on the toilet! Thanks for the help!
Hello. i am new to the android family
i have a nexus s GT-9020T
i have rooted my phone but without setting the clockworkmod reovery.
today i was playing with the rom manager and downloaded one of the rom from the list. after installation i was unable to start the phone only seeing the google logo with the unlock logo.
i went back into the recovery by typing flash recovery recovery.img etc.
run a restore and restart the phone but still not work
my nexus s is 2.3.4 by the way.
please assist
What "restore" did you run?
Go here: http://forum.xda-developers.com/showthread.php?t=1056062
And download the full rom:
Model: i9020T
Full Rom: GRJ22, KD1
That'll revert your Nexus S to the latest completely stock 2.3.4
Then you can flash recovery again and go back to clockwork mod and go flash another rom or whatever.
Remember when you're flashing a new rom you need to wipe data and cache and dalvik cache.
i run an restore from the backup that i made before installing the new rom using clockwork mod recovery, its part of the option when installing the rom using the rom manager * click box - backup * etc something like that
sheunghko said:
i run an restore from the backup that i made before installing the new rom using clockwork mod recovery, its part of the option when installing the rom using the rom manager * click box - backup * etc something like that
Click to expand...
Click to collapse
Next time don't use Rom Manager to make backups or flash roms. It's stupid and can get you issues like you're having.
Anyways, try wiping data and cache then restoring the backup, do it in Clockwork Recovery.
Let it boot, first boot always takes a while, 5-10 minutes. If you see the boot animation freeze, stop and restart, then yeah it's screwed up, otherwise, just let it is.
If still not working from your backup, do what I said in previous reply, just restore to stock 2.3.4 then re flash clockwork mod and start over with the rom you want to flash.
thank your nxt. i have found the real problem. it was not my backup problem or the rom that u provided. it was the version of my clockwork mod recovery. i was using an 2.x.x.x to restore the phone which is why it doesn't work. everything work fine now after i flashed with an 3.x.x.x and restore the phone. one question thou, where can i always find the newest clockwork mod recovery release ? thank you very much
sheunghko said:
thank your nxt. i have found the real problem. it was not my backup problem or the rom that u provided. it was the version of my clockwork mod recovery. i was using an 2.x.x.x to restore the phone which is why it doesn't work. everything work fine now after i flashed with an 3.x.x.x and restore the phone. one question thou, where can i always find the newest clockwork mod recovery release ? thank you very much
Click to expand...
Click to collapse
http://mirrorbrain.cyanogenmod.com/cm/recoveries/
Or just use ROM Manager to get the latest.
That's the only thing I use ROM Manager for... getting the latest Recovery.
thanks again nxt. if you don't mind really ...i have one more question. i know the phone intend to uninstall clockwork mod recovery once its restarted. i know there is command type into the cmd to avoid the phone uninstall the clockworkmod reovery and make it permanent in another word. I didn't run those command when i root my phone because i don't know if its good to make it permanent like.... hmmm like if there will be a 2.3.5 coming next month..just saying ok... with a permanent unofficial recovery will cause a problem?
sheunghko said:
thanks again nxt. if you don't mind really ...i have one more question. i know the phone intend to uninstall clockwork mod recovery once its restarted. i know there is command type into the cmd to avoid the phone uninstall the clockworkmod reovery and make it permanent in another word. I didn't run those command when i root my phone because i don't know if its good to make it permanent like.... hmmm like if there will be a 2.3.5 coming next month..just saying ok... with a permanent unofficial recovery will cause a problem?
Click to expand...
Click to collapse
Are you running custom ROM? If you are, it's already made to not revert back to stock recovery. If you leave it stock recovery you'll get notifications for firmware updates by Google, but remember that applying those to a rooted phone might screw things up too.
the blue one is stock recovery right?
sheunghko said:
the blue one is stock recovery right?
Click to expand...
Click to collapse
Don't remember. It should only have like 3-4 options.
thanks again nxt. no i am not running an custom rom. i mean not yet. i planed to try one from the rom manager download section then my phone couldn't start after installation and now i have restored my phone from my backup using the clockwork mod recovery 3.x.x.x.
Hey guys
I'm having an issue booting into clockwork recovery. and i'm having even more of an issue finding the answer, I'm pretty sure that someone is gonna come up with a thread which already answers my Q, I just don't know enough of the terms to search sorry
I've followed instructions here in Kursks walk through to unlock my loader, install super user and install clockwork mod etc.
Clockwork mod and super user are now fully upto date.
I've managed to do a backup of my current rom using clockwork mod.
I have also managed to get the phone to boot in to clockwork recovery from within the android app. But only once.
when ever i now try to do a backup, reboot into recovery, or boot to loader menu and select recovery it always fails.
I get the image of a box with the arrow next to android, then after a few seconds the box and arrow turn into a triangle with "!" inside it.
I'm probably making a rookie error here, but I'm having trouble finding the answer.
Thanks in advance for any help you can offer.
Matt
Yetidragon said:
Hey guys
I'm having an issue booting into clockwork recovery. and i'm having even more of an issue finding the answer, I'm pretty sure that someone is gonna come up with a thread which already answers my Q, I just don't know enough of the terms to search sorry
I've followed instructions here in Kursks walk through to unlock my loader, install super user and install clockwork mod etc.
Clockwork mod and super user are now fully upto date.
I've managed to do a backup of my current rom using clockwork mod.
I have also managed to get the phone to boot in to clockwork recovery from within the android app. But only once.
when ever i now try to do a backup, reboot into recovery, or boot to loader menu and select recovery it always fails.
I get the image of a box with the arrow next to android, then after a few seconds the box and arrow turn into a triangle with "!" inside it.
I'm probably making a rookie error here, but I'm having trouble finding the answer.
Thanks in advance for any help you can offer.
Matt
Click to expand...
Click to collapse
Reflash clockworkmod recovery via fastboot.
Sent from my Nexus S using XDA App
Hi and thanks for your reply
well i reflashed clockwork mod and selected to reboot into recovery, and that worked fine
I then booted back to android, selected a rom to DL and install, and got the same issue again
re-flashed again, selected a rom to install and that appears to be working
Do you have to re-flash clockwork recovery everytime? or is mine doing something weird?
Thanks again for your reply
Matt
Yetidragon said:
Hi and thanks for your reply
well i reflashed clockwork mod and selected to reboot into recovery, and that worked fine
I then booted back to android, selected a rom to DL and install, and got the same issue again
re-flashed again, selected a rom to install and that appears to be working
Do you have to re-flash clockwork recovery everytime? or is mine doing something weird?
Thanks again for your reply
Matt
Click to expand...
Click to collapse
You are wwelcome .
You are dowbloading roms via rom manager?
Sent from my Nexus S using XDA App
There is a file you must delete or rename to make cwr stick
Sent from my Nexus S using XDA Premium App
osugsxr said:
There is a file you must delete or rename to make cwr stick
Click to expand...
Click to collapse
Code:
/etc/install-recovery.sh
I'll ask aswell.
Clockwork recovery won't stick for me either. I9023.
I don't have the /etc/install-recovery.sh anywhere. Looked and searched via root explorer. No files whatsoever called install-recovery.sh. On CM7.
Can anyone give me any tips?
Downgrade to older clockwork via Rom manager . I've had that problem it makes no different and it works fine
Thanks guys I think you've managed to sort me out