Hello,
i use the above mentioned App for 3 days now and everything worked fine so far. But since today i get the message "access is denied" when i try press the "further (in german: weitere)" Button. This wasn´t like this before. Before i could choose from all of my mp3 on my Omnia 7.
Can someone maybe help me?
I use my Omnia 7 with the Dynamics v2.0.
Related
Anyone got phonepad running well?
can installed and show on the input selection,....but nothing happen when select phonepad....sme goes to tengo thumb as well......
Hi Crash74,
See attached, I hunted for about 3 weeks and eventually found this one, it is the only one that worked on my TYTN (Vodafone version)
Would recommend you remove all traces of any previous PhonePad installs.
Hope it works for you.
Any chance of a screen shot?
Thanks!
cieplowski said:
Hi Crash74,
See attached, I hunted for about 3 weeks and eventually found this one, it is the only one that worked on my TYTN (Vodafone version)
Would recommend you remove all traces of any previous PhonePad installs.
Hope it works for you.
Click to expand...
Click to collapse
i managed to find a working version from this thread...
http://forum.xda-developers.com/viewtopic.php?p=365481#365481
And direct download link as below,..
ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - International.CAB
Not sure is it the same one.....
Anyway,...thanks for the head up...
Cheers,..
Phonepad
I installed the phone pad, works like a charm. But when i click on symbol pad, it shows keyboard :S like it has been deleted, anyone exp. this as well? I like the symbol pad as well...
I had phonepad and symbolpad working... then suddenly they seem to have stopped.
Both are still in the SIP selection menu, but go to keyboard when selected (the options panels work though).
Clicking on the SIP selection menu takes about 3 seconds to come up too.
Anyone had this problem and managed to fix it?
Edit:
Actually, it's variable. On a soft reset, sometimes the pads work, sometimes they don't, sometimes only one works. M3100, if that makes any difference (probably not, from the comments above).
Ditto, same problem here, any suggestions what would be causing this?
Is anyone else having trouble with the weather app on the diamond. I keep getting the connection error dialogue box no matter how i try to connect to get the updates.
Yes there was a problem with this yesterday but today everything is ok for me ... if not try this http://forum.xda-developers.com/showthread.php?p=2821451&posted=30#post2821451
it wasnt working a few days ago, however just checked it now and it seems its working
I got the same problem for a day, then I reload the new juicy rom 2.6 problem solve.
Sorted
Thanks guys, the database editor set default url did the trick.
htc weather app
I think I may have fixed this issue on my phone. I guess alot of phones are having this problem. I found that my manilla files for the sprint TF3D theme was missing a file. So I installed the andreas falke weather database and it installed the missing file and now it works fine.
Hello everybody,i'm quite new to the windows mobile platform,just got my Touch Diamond a few months ago and i have the original HTC Rom instaled.Yesterday i was experiencing problems with the weather app and read this topic and the on given in the second replay,and decided do give it one more then to see if it will work on it's own.Today i went in the "Settings Tab" - "Data" Tab and unchecked "Download weather automatically" then i checked it again,hit the "Back" button got a messenge from hy HTC telling me something about the weather and all was fine after that.You can try it and see if it works
Cheers
Sorry if this has been covered elsewhere, but I couldn't dig it out.
I have fully licensed Navigator 6 software, and TT has promised be a new activation code after I have transferred to my HD2 from my TyTn II.
I can get the TT6 cabs onto my HD2 and get the HD2 recognized by TT Home 1.5. But when TT installs, it throws up a configuration screen that is obviously in the wrong screen resolution and conflicts with the HTC operating system overlay.
Can anyone offer an work around, since I see that some have obviously overcome the problem already?
Stephen
My researches continue. It seems no-one has ever successfully run TTN6 on the HD2. It would in theory be possible if the apps to lower the screen resolution would work with WM 6.5; but they don't
Meanwhile TomTom has discontinued sale of TTN7 Windows, although it remains available for the iPhone.
S
Stephen Selby said:
My researches continue. It seems no-one has ever successfully run TTN6 on the HD2. S
Click to expand...
Click to collapse
sorry mate if you are referring to tomtom version 6.000, i have it on my HD2 nd it is working perfectly, i had it on my HTC Diamond and Diamond2. I have it installed on my sd card
Is the screen resolution ok? I can't get the set-up screen in the correct resolution after firing up the cab and installing successfully off the SD card. Did you just put the old SD card from the Diamond 2 into the HD2?
Stephen Selby said:
Is the screen resolution ok? I can't get the set-up screen in the correct resolution after firing up the cab and installing successfully off the SD card. Did you just put the old SD card from the Diamond 2 into the HD2?
Click to expand...
Click to collapse
all working good...did not have to do anything...just installed the cab on the sd card and opened the application and located the maps et voila
NB: I used the same micro sd that i used to have in my Diamond 2 and the cab was on it
you have a private message...check it out
Stephen, I have exactly the same problem. If you get this to work please let me know how
Thanks
gdayhtc was able to resolve the problem for me. It is obviously a question of some cabs working and some not. The cabs on my TomTom DVD did not. I have tested TT6 today: it worked fine. Will go to landscape when the HD2 is tilted (after a tweak) and does not interfere with bluetooth.
Could you post the cab you are using now?
Please pass your request to ericjennings.
Hi, i am also having the same issue, can i share the same request? thanks.
tom tom navigator 6
I've noticed that it only works if you run it if your system in landscape mode before you launch the program. it wont run in portrait mode.
ImperfectTreo said:
Hi, i am also having the same issue, can i share the same request? thanks.
Click to expand...
Click to collapse
I am also in same boat, can someone pls share the working cab?
Thanks.
Same issue here.
gdayhtc. I understand you have the cab that will work. I would greatly appreciate it if you could send it to me. Thanks in advanced.
AC
Obsolete
Hello, I see you have found a way to get TomTom 6 to work with WM 6.5. I'd like to get it to run properly on my lg expo. It runs in landscape with the keyboard out but I have 3 panels side by side of the same screen. Forget about it in portrait—the screen is a garbled and smushed at the top of the lg screen. I've tried both cabs ttn.cab & ttn2003.cab found on my original dvd. Please help. Thanks
Philip S.
TTN 6 CAB file
Hi,
i cant see any links for the Tomtom Navigator 6 cab file so im assuming its being sent directly to folks.
i have lost my sd card i used on my qtek 9100 but still have the box including my product code for the ttn6. could anyone help me out by telling me where i will find a working cab file for ttn 6?
Many thanks in advance.
i have a gps tomtom v6 , cracked ***Mod Edit - Read and understand this link if you want to continue to post on XDA..http://forum.xda-developers.com/announcement.php?a=81)
You need to install WVGAFIX4 in your window mobile 6.5 device. Check out the forum http://forum.xda-developers.com/showthread.php?t=455974 .
Once installed then install the TTN 6 as normal BUT run the WVGAFIX4 before running the TTN 6 in your mobile.
I'm interested in setting up a reward for this, It really is a great app and the MS equivalent also isn't available yet. I toyed with it for a bit on a friends 6.0 phone. Is there another option out there yet? I've tried the cab posted here http://forum.xda-developers.com/showthread.php?t=524612
However when i setup my hardware button and get to the part where you have to say "search concert tickets" it never registers. Anyone had any luck with this cab?
I'm using NRG Rom Mar26th on a AT&T Tilt 2.
Hello,
Can someone help me with a problem?
I am bussy with a rom for the htc raphael.
The problem i got with the rom is the htc sense 2.5 camera tab.
When i press on the camera button on the right corner of the tab nothing starts or it will hang iff i push the camera button in the startmenu i got something about a certificate not signed or missing an application or some times it's just hanging.
I have tried out differend version of the camera files and other files what the camera uses.
I got differend result one time it works or it just hangs or i get the message certificate not signed or application missing.
I ask which programs in the ext. map do you guys use for the camera button and the htc sense camera tab?
And where can I download it or could you upload it so i can try it out in my rom and look if this will work?
Thank you for helping out.
menomenic said:
Hello,
Can someone help me with a problem?
I am bussy with a rom for the htc raphael.
The problem i got with the rom is the htc sense 2.5 camera tab.
When i press on the camera button on the right corner of the tab nothing starts or it will hang iff i push the camera button in the startmenu i got something about a certificate not signed or missing an application or some times it's just hanging.
I have tried out differend version of the camera files and other files what the camera uses.
I got differend result one time it works or it just hangs or i get the message certificate not signed or application missing.
I ask which programs in the ext. map do you guys use for the camera button and the htc sense camera tab?
And where can I download it or could you upload it so i can try it out in my rom and look if this will work?
Thank you for helping out.
Click to expand...
Click to collapse
You probably need the updated sdkcerts if you are using the camera hacked to support both sensor 3.3 and 4.x. I have attached a EXT package I took from Gen.Y kitchen. I ran into the same problem previously and just using the new sdkcerts fixed it.
Thank you for helping out i will try it.
Can you also say wich version you use for the camera and the album?
I appriciate your help
Hello mwalt
I can say it works.
Only when i start the camera and push on the screen there's nothing happing no settings nothing it even makes no photos.
But so far the camera starts and also the album.
I only need know a good working camera file and album
Thank you for helping out mwalt