I was following the instructions on page:
http://forum.xda-developers.com/showthread.php?t=2063968
in order to install cm10 to my nook hd firm ver 2.0.4
rooted with the all in one package after skipping oobe.
But I cannot get the boot loader working properly.
My nook hd does boot from the sd card. But the screen is mostly black with some light leaking.
So I cannot see any menu to proceed.
I did see the card went through some actions as I could see partitions were created properly.
Please help! Why the heck am I getting black screen when using the boot loader?
It's likely the sdcard. Try again with a different sdcard. See the sdcard compatibility thread in the dev section for a list of cards that have been reported to work.
Related
Hey there. I could really use some help. I rooted my nook color 1.1 a while back with no issues and finally decided to take another step. I added Rom Manager from the market. Did a backup and then after adding cm 7.02 encore to my class 10 16gb card, I followed the Rom Mgr directions to attempt an upgrade. Device is now stuck.
I have tried putting the various .zip files listed in the "Dummies Guide to fixing My Nook Won't Boot."
I have tried using various sized (128 mb, 4gb, 8gb) Clockwork recovery Images (that I write to my card via winimage) along with nook-complete-restore-1.0.1.zip adn also then with repartition-boot-with-stock.zip that i copy and paste onto the card that has the recovery images.
All attempts seem to have the same result:
With the uSD card out: I get "Touch the Future of Reading" then "android_" then the android robot splash screen where it hangs.
With the card in it just sits at a black screen.
I ahve also tried connecting with adb. My nook shows up as a usb device but i can't get a serial number from "Adb devices."
Any idea on how to get this back to something usable?
I really appreciate any help.
rileychris said:
Hey there. I could really use some help. I rooted my nook color 1.1 a while back with no issues and finally decided to take another step. I added Rom Manager from the market. Did a backup and then after adding cm 7.02 encore to my class 10 16gb card, I followed the Rom Mgr directions to attempt an upgrade. Device is now stuck.
I have tried putting the various .zip files listed in the "Dummies Guide to fixing My Nook Won't Boot."
I have tried using various sized (128 mb, 4gb, 8gb) Clockwork recovery Images (that I write to my card via winimage) along with nook-complete-restore-1.0.1.zip adn also then with repartition-boot-with-stock.zip that i copy and paste onto the card that has the recovery images.
All attempts seem to have the same result:
With the uSD card out: I get "Touch the Future of Reading" then "android_" then the android robot splash screen where it hangs.
With the card in it just sits at a black screen.
I ahve also tried connecting with adb. My nook shows up as a usb device but i can't get a serial number from "Adb devices."
Any idea on how to get this back to something usable?
I really appreciate any help.
Click to expand...
Click to collapse
You need to boot with your recovery card out otherwise you will just keep rebooting to recovery. Also how long did you wait at the android splash screen? First boot can take a while as the Nook is building cache/dalvik. I believe mine took nearly 10 minutes to boot the first time. Have you tried the 8 failed boot reset yet?
I think i had done well more than 8 without seeing anything happen, but maybe not. This time i tried holding the power, the n, and the volume+, buttons and doing that twice in a row all of a sudden brought me into the recovery menu.
All is well now.
I installed CyanogenMod 7.0 yesterday. I'm trying to boot into recovery to install a new theme. I've tried using RomManager to boot into recovery, choosing boot into recovery in the power button options, and holding now the N button when "Read Forever" appears after turning my Nook on. Any other ideas?
Thank you
Can't boot into recovery mode either
I'm running CyanogenMod-7-05252011-NIGHTLY-encore in kernel version 2.6.32.9 [email protected] # 174, Android version 2.3.4 on a nook color I bought five days ago. I've gotten CM7 to boot.
Following the instructions to install Android Market and Google Apps on Nook Color CM7 at the-ebook-reader.com/nook-color-cm7.html hasn't worked. I can't get into recovery mode, never get the "Touch the Future of Reading" display (don't get this in B&N nook color mode either, just "Read Forever" since I installed software version 1.2.0).
I've put the gapps-gb-20110307-signed.zip file 'as is' (NOT unzipped) into the microSD card's root directory.
What happens is this: I hold down the 'n' and the main power button. The screen flashes white very briefly, then the white lettering on green cyanogen appears for less than a second before disappearing. The nook color is powered off then.
Anybody know what's going on, and how I can get into recovery mode to load the google apps pack and android market?
Fixed it
Got gapps to load using ROMmanager to enter recovery mode - no problems now.
With CM7 in a late-model nook color, using ROMmanager to enter recovery mode and load other zipped apps worked for me.
I've spent a couple days trying, I've searched the forums and Google'd any issue I ran into, but I think I am just doing something wrong here. As a last resort, I'm making this thread to ask for your help.
I am having the hardest time getting my Nook Color (blue dot) to dual boot correctly. I can get it to boot into C7 just fine, but when I try booting to the stock Nook Color (alternate boot?) it just hangs at the screen with the logo and "alternate mode" in text.
I'm following this guide:
The Very Corrected CM7 & Stock 1.2 Dual Boot Guide
I have a CWM SD card with the corrected 1gig image with CWM 3.2.0.1.
I have the two new partition files to correct the blue dot changes on my Nook.
I have Cyanogen Nightly 138.
I have downloaded all the files that the guide mentioned.
I can root it successfully and get rooted Nook Color, and I can install C7 over it and have it run fine. Dual booting is a different story and is giving me a headache
In the guide, I have tried using the included u-boot file, which unfortunately didn't work. I have also tried with and without correcting the blue dot partition change.
I then reinstalled C7 to use the default boot method (the one with the menu) and I was able to get into C7. But holding the volume buttons to boot to stock causes the Nook to hang.
Am I doing something wrong? Any help will be really appreciated.
I flashed the nook tablet firmware on my nook color, after a stressful day at work and not realizing what forum I was downloading roms from. All i get is a black screen, I have tried flashing recovery images with no success. Has anyone else done this and recovered?
Have you tried this?
http://forum.xda-developers.com/showpost.php?p=25405429&postcount=13
Yea. I don't get any power at all to the screen. I have tried to flash cm7 recovery roms also with no success.
enjoyed said:
Yea. I don't get any power at all to the screen. I have tried to flash cm7 recovery roms also with no success.
Click to expand...
Click to collapse
Tried using a CWM Bootable SD? Link
And also repartitioning the Nook by following this.
You might want to try holding the power button for a full 15 seconds... release it... and hold it again for a few seconds and see if it turns on then.
enjoyed said:
I flashed the nook tablet firmware on my nook color, after a stressful day at work and not realizing what forum I was downloading roms from. All i get is a black screen, I have tried flashing recovery images with no success. Has anyone else done this and recovered?
Click to expand...
Click to collapse
That is not supposed to be possible. There are assert checking codes in the zips to prevent that. How did you do it? Are you sure you have a nook color? The nook color has a black bezel and the nook tablet has a silver one.
Edit: I just looked at the CM9 alpha for the Tablet. It does not have an assert check in it. So I guess it is possible.
I recommend going to my tips thread linked in my signature and making the 5.5.0.4 CWM card. I would boot to that and wipe /system. That is where most of the files get put by the Tablet CM9 zip. The problem is going to be /boot. Some of the Tablet boot files are named the same as nook color, but are entirely different. (mlo, u-boot.bin). You need to get rid of those. Ordinarily flashing a new rom will replace those, but not sure they will now. You have two choices. Use adb to access /boot and remove the files. That takes a little expertise. Or you could use an older CWM (3.2.0.1 or older) card to wipe /boot (that option was removed in the new version, with good reason.) Ordinarily I tell people to never wipe boot because it wipes the CWM stored there too. But in your case you need to get rid of those tablet files.
EDIT 2: I just did some more research and all of the Tablet ROMs I could find did have assert checks in them. That one I referenced above was one I manually modified to install on a bootable SD. So I am having difficulty figuring out how you flashed a tablet ROM to your color. Since you have not responded to this post, I assume you figured it out, gave up, or were wrong.
Sent from my Nook Color running ICS and Tapatalk
I just flashed the newest build to my Nook Color and now the device will not turn on at all. I tried holding down 'power', 'n', as well as 'power', 'n', and 'volume +' and nothing happens. There is no flash on the screen - it is just blank. The device is fully charged, it just won't turn on. I have tried several times (and over several days) to try and turn it on, but to no avail. Any advice?
boomerjr622 said:
I just flashed the newest build to my Nook Color and now the device will not turn on at all. I tried holding down 'power', 'n', as well as 'power', 'n', and 'volume +' and nothing happens. There is no flash on the screen - it is just blank. The device is fully charged, it just won't turn on. I have tried several times (and over several days) to try and turn it on, but to no avail. Any advice?
Click to expand...
Click to collapse
The NC will not try to turn on unless there are valid boot files in either the boot partition or an SD. Obviously your boot files are corrupted. Try booting with a bootable SD to see if you can get it to turn on. The battery must also be charged.
Sent from my Nook HD+ running CM10.1 on emmc.
I've been looking at threads and blogs all over to try and find a fix that will work but I can't find one. I guess this is sort of my last hope.
I tried to update CM7 using ROM Manager. I selected to flash the ROM and create a backup, but when it turned back on it got stuck in a boot loop at the "Touch the Future of Reading" screen. I then tried to create a bootable clockwork recovery SD card, but it just will not work. I re-burned the image to the SD card 3 times so far. All the Nook does is display the "Touch the Future of Reading" screen indefinitely. It no longer is in a boot loop, it just won't get past this screen.
I'm completely out of ideas, if somebody could tell me what to do to make it boot into clockwork recovery I would be really grateful. Really, getting it to boot into anything would be great.
mchalbscal said:
I've been looking at threads and blogs all over to try and find a fix that will work but I can't find one. I guess this is sort of my last hope.
I tried to update CM7 using ROM Manager. I selected to flash the ROM and create a backup, but when it turned back on it got stuck in a boot loop at the "Touch the Future of Reading" screen. I then tried to create a bootable clockwork recovery SD card, but it just will not work. I re-burned the image to the SD card 3 times so far. All the Nook does is display the "Touch the Future of Reading" screen indefinitely. It no longer is in a boot loop, it just won't get past this screen.
I'm completely out of ideas, if somebody could tell me what to do to make it boot into clockwork recovery I would be really grateful. Really, getting it to boot into anything would be great.
Click to expand...
Click to collapse
You are in a recovery bootloop with no recovery installed. Go to my tips thread linked in my signature and make a bootable CWM SD as described in my item A10. It has been modified to get you out of these kinds of bootloops. Then you can flash whatever new recovery or ROM (including stock) you want. But do it manually with CWM, not ROM Manager.
EDIT: From the symptoms, it sounds like you had stock on emmc and CM7 on SD (Touch the Future... is stock). If that was the case, your mistake was using ROM Manager with the SD install. It does not work. It only works with emmc installs of CM.
WinDiskImager always tell me "an error has occured when attempting to get a handle on the device. Error 8." so I always use the dd command on Ubuntu to burn the image. Still, I tried to make a bootable SD out of that and my Nook still won't get passed the "Touch the Future of Reading" screen. Also, whenever I try and open the file on the card with the burned image, it tells me the filesystem type is unknown and that I have to format the card to use it.
mchalbscal said:
WinDiskImager always tell me "an error has occured when attempting to get a handle on the device. Error 8." so I always use the dd command on Ubuntu to burn the image. Still, I tried to make a bootable SD out of that and my Nook still won't get passed the "Touch the Future of Reading" screen. Also, whenever I try and open the file on the card with the burned image, it tells me the filesystem type is unknown and that I have to format the card to use it.
Click to expand...
Click to collapse
It is not burned properly if windows cannot read it. Did you use an external card reader rather than any built into your PC? You should. That error message in win32diskimager tells me your hardware is not working. You need to keep trying until it is burned right or it will never boot.
Sent from my Nook Color running CM10 with Tapatalk.