Hello All,
I found the cifs.ko for N8000 but it don´t work on N8010.
If I load the modules in "Mount Manager" I get the error message "exitcode :255 stdout: stderr: insmod: ini_module'...'failed(Exec format error).
Do I have to wait for the N8010 Modules?
Thanks and regards
Poseidon
yep mate, you have to wait till someone will compile e.g. this module for a certain kernel like yours from the samsung sources.
Thanks,
is someone investigate that issue?
Im about to build a custom rom and therefore i compiled the 4.1.1 kernel with cifs.ko and md4.ko myself.
You can download it here: http://www.multiupload.nl/A32EW35HET
It is build with the Darkman Stock Android 4.1.1 Jelly Bean XXBLK9 as a base http://forum.xda-developers.com/show....php?t=1925720
I also changed the battery logo to a circle percentage one.
Its not ready yet, but cifs manager works fine. If you want to use it, you have to insert at path to cifs.ko "/lib/modules/md4.ko:/lib/modules/cifs.ko" and then it should work.
Related
I am using the Official T-Mobile Froyo 2.2.1 OTA Update.
Build Number: FRG83D
Kernel version: 2.6.32.9-27237-gbe746fb
Note that the Kernel version is slightly different from the Official 2.2 Froyo OTA Update that was on Droid. (I think it was Droid... dunno.)
I was able to root my phone with that T-Mobile ROM using SuperOneClick 1.5.5 under Windows. I installed BusyBox using the APK in the Market.
Now I want to install OpenVPN. I have not been able to locate a download of the tun.ko or tap.ko modules for this kernel version.
- Can one of you crack developers post a link? All I really want is a binary.
- Barring an easy fix like that, can someone tell me how to find that exact, specific kernel tree? I am happy to try compiling it myself, but I don't know how to get the correct tree (so that the compiled .ko files will have matching kernel versions). Also, I don't know how to compile the kernel for Android. (If someone can point me to a HOWTO, plus the right kernel source, I will try it and upload the binaries if I am successful.)
Any assistance is greatly appreciated.
Really? Nobody?
dereks443 said:
Really? Nobody?
Click to expand...
Click to collapse
Install my 20101106 kernel.. the module is built in.. if its not built into the stock kernel.
hi, pleas can you post the link ypu gpt the the tap/tun for htc mytouch 3g
regards
I have searched high and low for a tun.ko module for a rooted Android 3.1 Motorola Xoom.
I have tried to load tun.ko modules from Android 3.0 releases without success.
I am getting "(Exec format error)" errors while using insmod.
Can someone help me here? I want to get OpenVPN working and have been unsuccessful so far.
Thanks,
Eric
I compiled the module for 3.1, you will find it here:
hxxp://devil.homelinux.org/xoom/
greets,
Olli
Hi Olli,
I tried this tun.ko for the Galaxy tab 10.1 - 3.1.
I still get "Exec format error". Is that suppose to work on my device?
Thanks a lot.
@yochaizv
Did you read my small info on the website?
Your kernel version *must* match the module version.
Otherwise the kernel refuses to load the module and
you get the format error.
My module was compiled for the Motorola xoom.
It's very likely that your kernel is different.
Olli
Hi all,
Does any body have compile module tun.ko for samsung galaxy tab 10.1 with kernel version 2.6.36.3? i have same problem with olli.... Can't find correct module for my device. Please help and i will really appreciate it.
Thanks
Ali
Upss i mean same with yochaizv...maybe olli can help us... Thanks
Ali
ol_li said:
I compiled the module for 3.1, you will find it here:
hxxp://devil.homelinux.org/xoom/
greets,
Olli
Click to expand...
Click to collapse
i cannot find a working tun.ko for my xoom,
uname tells me:
Code:
# busybox uname -a
Linux localhost 2.6.36.3-00010-g3139c20 #1 SMP PREEMPT Fri Jul 8 06:11:47 CDT 2011 armv7l GNU/Linux
any help is really appreciate.. i do need openvpn to work.. thank you
noob question what is tun.ko, and wwan?
Hi all,
I've looked at forums in the DEV section and can find a tun.ko module for an earlier kernel of the TF101. None of the ROMs including Clemsys, Revolver's, Netformer's, Prime's and any other I have download include this module in their kernel builds. I would like for this module to be included, which was in Prime 1.2, but that was for a kernel that is no longer in use and that is for Honeycomb 3.0. So my question to the Devs is, why no compile tun.ko for any and all the ROMs you deploy?
Thanks for your response.
In case people don't know, tun.ko is the module that allows a rooted device use an app like VPNC to log into and create a VPN tunnel through a Cisco VPN Concentrator.
jamdev12
Are you sure, TUN isn't in prime 1.6? I see it listed as added in version 1.4, so I don't think that it would have been removed in updated versions.
All the ROMS you mentioned (clemsyn, PRIME, Revolver) include the tun.ko compiled into the kernel. You do not need any external tun.ko module for VPN to work.
However, the trick to get VPNC to work is to rename the file /system/bin/ip to /system/bin/ip.bak. This causes the /system/xbin/ip to be picked up instead while works fine.
guptaavi,
Thanks for the info. I'm stupidfied and you have enlighten me. I know that sounds corny, but I appreciate the help here, because since I did not see the module in the /system/lib/modules folder, I thought it wasn't compiled. Now I know the difference between compiling it into the kernel and compiling it for the kernel.
jamdev
Hi guptaavi,
So I must be stupid, because I did what you just told me about changing the file name for the /system/bin/ip to ip.bak, but the VPNC widget takes forever to start and it just fails. I know the settings are correct because I can run VPNC on my OG Droid without issues. I'm running CWM7.
Do you have any suggestions?
jamdev12
If tun.ko is build into the system, how do we setup OpenVPN to use tun.ko? How do i tell OpenVPN where the tun.ko file is?
Pls help as im using PRIME 1.8.4.
TIA
JL
UPDATE: These modules were added by request to Hundsbuah's kernel here:
http://forum.xda-developers.com/showthread.php?t=2246062
______________________________________________________________________
I was not going to post this because it has limited use for most TF300T owners but it can't hurt so here it is. The attached file(ath9k.tar.gz) contains kernel modules needed to get AR9271 based usb wifi dongles working on the latest stock TF300T kernel(Asus build 10.4.2.20, kernel version 3.1.10). I have tested the modules with this dongle: TP-Link TL-WN722N.
Uncompress the file and you will get an ath9k directory. Inside are the modules, 2 scripts for easy loading and unloading of the modules, and iwconfig compiled for Android. Getting the dongle working goes something like this:
Su to root. Copy htc_9271.hw to /system/etc/firmware. Run the scripts start_ath9k and stop_ath9k to load and unload the modules.
After the modules are loaded, insert the dongle into the keyboard full size usb port and run ifconfig and iwconfig as needed. If wlan0(default android wifi) is on then iwconfig will show the dongle as wlan1.
Note: I did not post this on the Dev forum because I did not develop these modules...I only changed a few lines in 2 modules before compiling them.
ath9k
I have one mtech atab7t tablet with 4.0.4 android(rooted) and 3.0.8+ kernel [email protected] can i add the driver somehow?
kerteszalex said:
I have one mtech atab7t tablet with 4.0.4 android(rooted) and 3.0.8+ kernel [email protected] can i add the driver somehow?
Click to expand...
Click to collapse
Not very likely...you would need to get your kernel source, add ath9k driver support to the kernel config, then fix any compile errors.
bads3ctor said:
Not very likely...you would need to get your kernel source, add ath9k driver support to the kernel config, then fix any compile errors.
Click to expand...
Click to collapse
you can able to make a tutor for me? i am new in these things :/
kerteszalex said:
you can able to make a tutor for me? i am new in these things :/
Click to expand...
Click to collapse
Hmmm...kernel module compiling in 1 easy lesson....not sure it's possible.
bads3ctor said:
Hmmm...kernel module compiling in 1 easy lesson....not sure it's possible.
Click to expand...
Click to collapse
I really need this usb wifi support for my tab :/ i purchased recently more powerful antennas for my router but this tablet lost the signal on the next room :/ sorry for my bad english
kerteszalex said:
I really need this usb wifi support for my tab :/ i purchased recently more powerful antennas for my router but this tablet lost the signal on the next room :/ sorry for my bad english
Click to expand...
Click to collapse
You need the kernel source for your tablet and a way to root your tablet. I did a cursory Google search for the kernel source for your tablet and I can't find it. If you can get the kernel source code for your tablet then it might be possible to compile ath9k modules. If you can't root that tablet then kernel modules won't be useful because there would be no way to load them.
bads3ctor said:
You need the kernel source for your tablet and a way to root your tablet. I did a cursory Google search for the kernel source for your tablet and I can't find it. If you can get the kernel source code for your tablet then it might be possible to compile ath9k modules. If you can't root that tablet then kernel modules won't be useful because there would be no way to load them.
Click to expand...
Click to collapse
the tablet comes with root.i can extract the kernel from it?
kerteszalex said:
the tablet comes with root.i can extract the kernel from it?
Click to expand...
Click to collapse
You need the kernel source code from the tablet manufacturer.
Hello! I have source code for my kernel (Nexus 7 4.2.2) and I successful built module cifs.ko and cp210x.ko, but i can't build module ath9_htc. I add in my nexus_defconfig file
CONFIG_ATH_COMMON=m
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_HTC=m
but after make modules command only atk.ko created.
Sorry for my english.
SpulN said:
Hello! I have source code for my kernel (Nexus 7 4.2.2) and I successful built module cifs.ko and cp210x.ko, but i can't build module ath9_htc. I add in my nexus_defconfig file
CONFIG_ATH_COMMON=m
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_HTC=m
but after make modules command only atk.ko created.
Sorry for my english.
Click to expand...
Click to collapse
I had to comment out a few lines of code in 2 modules to get mine to compile. On the TF300T, it has to do with LED code not present in the stock kernel that is referred to in 2 of the modules. If you use my modules on the TF300T, you will get no LED blinking on the WIFI stick when data is transmitted or received.
EDIT: Newegg has an Atheros AR9271 USB stick for $9.99 with a cradle.
http://www.newegg.com/Product/Product.aspx?Item=N82E16833166068
For anyone wondering what these modules are used for, read this:
http://forum.xda-developers.com/showthread.php?t=1714300
HELP!! Need Kernel Module ath9k for GT-N5110 Galaxy Note 8.0
HELP !!!
Could really use some help. For the life of me I can't compile a kernel module driver ath9k for my USB wireless adapter TL-WN722N. So it can be used by insmod on my rooted Galaxy Note 8.0 GT-N5110 on Kernel 3.0.31 Build BMC9 running android 4.1.2. The source code is available at opensource.samsung. and is listed as the GT-N5110 NA (north america) model. If some one could help me please? I would be forever in your debt... :good:
Hello
When trying to add modules via your script, it gives me an "exec format error" for each module. How can this be fixed?
Device: Asus Padfone A66, Android 4.1.1
hi I am getting some problem with this attach file, i decompressed it and got the directory. but what are the next stapes ? sorry but i am not getting that part to copy to system/etc/firmware. will u make clear the process stapewise?
Sorry for bothering this old thread. I'm trying to get this to work on my OnePlus 3 running Oxygen OS Nougat. I installed Linux on my phone and I would like to install the TP-LINK drivers on it as the inbuilt WiFi module on my phone does not support monitor mode. I connected this WiFi adapter and trying to get it to work. Please help.
Can someone help me wid this error http://pastebin.com/7kD4vewW First i got an inline kernel error then i fixed it by cherry picking this commit https://github.com/CyanogenMod/android_build/commit/ac9c858bb5b8083f16b00e461b61819b34869e36 .. After that i got this error can someone help me ???
By the looks of the error you are trying to build with a pre compiled kernel. Specify in your BoardConfig the kernel directory and you should be good to build.