I tried to flash stock rom in my galaxy y and it began and for hours it was stuck at this :
Get PIT for mapping
Get PIT for mapping
boot.img
Click to expand...
Click to collapse
after that i unplugged the usb cable and after that when i tried to flash it says cannot open COM port and i havent removed the battery yet
is there any solution ?
HELP !! :crying:
hmm not sure I understand did you exit download mode or are you still in it also where'd you get the files you flash and which Odin version are you using
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
tingtingin said:
hmm not sure I understand did you exit download mode or are you still in it also where'd you get the files you flash and which Odin version are you using
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
Click to expand...
Click to collapse
im still in download mode , i got the files from doky73's thread (i usually flash it without any problem) and im using Odin3_v1.84
Well what you should do is pull the battery and re-enter download mode then try again
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
tingtingin said:
Well what you should do is pull the battery and re-enter download mode then try again
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
Click to expand...
Click to collapse
i tried this 5-6 times and it worked thanks !!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> system.img
<ID:0/003> sbl.bin
<ID:0/003> param.lfs
<ID:0/003> userdata.img
<ID:0/003> BcmCP.img
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> csc.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Related
Help plss. I was caught in a boot loop and unable to enter TWRP recovery mode. I tried to flash the stock ROM but got an error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/B]
<ID:0/003> Removed!!
<ID:0/003> Added!!
Please help!
Mee1122 said:
Help plss. I was caught in a boot loop and unable to enter TWRP recovery mode. I tried to flash the stock ROM but got an error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/B]
<ID:0/003> Removed!!
<ID:0/003> Added!!
Please help!
Click to expand...
Click to collapse
Hi,
Post your problem HERE
Why were you trying to re-partition?
malybru said:
Hi,
Post your problem HERE
Why were you trying to re-partition?
Click to expand...
Click to collapse
I just saw it in an article saying I should do that when unrooting or unbricking my phone. Is it not the proper procedure? im kinda new with android.
Mee1122 said:
I just saw it in an article saying I should do that when unrooting or unbricking my phone. Is it not the proper procedure? im kinda new with android.
Click to expand...
Click to collapse
Hi,
Post in the thread I gave you.
They will tell you what to do.
malybru said:
Hi,
Post in the thread I gave you.
They will tell you what to do.
Click to expand...
Click to collapse
Thanks for taking time to reply. I actually solved my problem with reading a lot here. I just plugged the usb cable at the back of my computer and it worked! now i have a new question and i justed posted it in the link you gave me. Thanks again!
I tried to flash a stock ROM and got an error in ODIN that said:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now my phone only boots into Odin Mode and to a screen that says:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Please Help!
Odin stock Rom tar and start from scratch.
carwashman said:
Odin stock Rom tar and start from scratch.
Click to expand...
Click to collapse
I tried multiple Stock ROMs and I get the same error. Do you know of a legit one? The ones I had could've been corrupt.
What device do you have?
carwashman said:
What device do you have?
Click to expand...
Click to collapse
The Sprint Samsung Galaxy S4. SPH-L720
You may have to try the kitkat rom.
http://forum.xda-developers.com/showthread.php?t=2663619
This is the one I used recently. I was already on NAE
carwashman said:
http://forum.xda-developers.com/showthread.php?t=2663619
This is the one I used recently. I was already on NAE
Click to expand...
Click to collapse
Is there a way to find out what I'm on without being able to elsewhere except download?
EDIT: I get the same error with that ROM.
EDIT #2: I got it to work!!! Thanks so much guys!
As the title says, I tried to downgrade from lollipop 5.0 to 4.2 because I've had several issues and I also wanted to get root. I think part of my mistake was I wiped data/factory reset before I flashed AP. Any help would be much appreciated, as I have been at this for the past five hours. I added some info below that might help below. Thanks
- I cannot boot into recovery and get the message (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again)
- CP is the only thing that will flash and CSC also fails
- model number is g900a AT&T
- I have used Odin 3.10.7 and 3.09, but no luck
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> persist.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you try to repair him via kies?Maybe would help.
Sent from my D6503 using Tapatalk
Hey I have also experienced the same thing before, I was panicking that time, so I fixed it by flashing the old zip file, if that does not work try following the instructions your phone gave eg. Go to kies
VoltexYT said:
Hey I have also experienced the same thing before, I was panicking that time, so I fixed it by flashing the old zip file, if that does not work try following the instructions your phone gave eg. Go to kies
Click to expand...
Click to collapse
Kies and kies3 are both not recognizing my device. I heard it could be because of usb debugging, but I can't boot into my phone to check.
Allek84 said:
Did you try to repair him via kies?Maybe would help.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Both kies and kies3 are not recognizing my device.
Guys, i need your help..
my device bootloop.
Product Name: SM-G530H
Current Binary : Custom
System Status: Custom
here'e some information about the device and the tools:
1. debugging mode : OFF
2. root status : Unroot
3. Firmware : Official KitKat 4.4.4. G530HDCU1AOF1 (Indonesia)
4. Windows 7 SP1 32-bit
5. Samsung-USB-Driver-v1.5.63.0
6. (Odin 3.04, Odin 3.07, Odin 3.12 )
I try to :
1. wipe data/ cahe, the result is none...
2. root device via Odin, failed.
3. Flash via odin with some firmware ( HDC, HXX, HXC) the result also failed..
=============================================================
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> sec.dat
<ID:0/003> boot.img
<ID:0/003> FAIL! (Erase)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
==================================================================
4. Change usb port, change usb cable, still not fix the problem..
Why i can't flash the device via Odin? and how to fix it?
Please help me...
Hi..
Ok I have a couple of Questions.
Have u try flashing Stock ROM into it?
Remove the battery first and insert it back and enter Download Mode manually by pressing HOME, Vol DOWN and Power button. It will ask u to press Vol UP to confirm.
I had this experience before and manage to fix it by entering download mode manually and not from adb command.
If that not fixing or u still get stuck, please revert back here.
Gudluck!
RidzVarn said:
Hi..
Ok I have a couple of Questions.
Have u try flashing Stock ROM into it?
Remove the battery first and insert it back and enter Download Mode manually by pressing HOME, Vol DOWN and Power button. It will ask u to press Vol UP to confirm.
I had this experience before and manage to fix it by entering download mode manually and not from adb command.
If that not fixing or u still get stuck, please revert back here.
Gudluck!
Click to expand...
Click to collapse
"Have u try flashing Stock ROM into it? "
how can i do that?
yeah im flashing just like that you mention above...im not have any idea to do another way..
zayra.qu33n said:
"Have u try flashing Stock ROM into it? "
how can i do that?
yeah im flashing just like that you mention above...im not have any idea to do another way..
Click to expand...
Click to collapse
Alright.. please try with this stock ROM.
http://www.mediafire.com/file/ez4d3zhhoz94gcc/G530HDCU1AOA2_G530HOLB1AOA2_v4.4.4_4File.zip
Flash using Odin and follow earlier steps.
Best of luck! :good:
Still failed to flash... using the firmware above
================
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> sec.dat
<ID:0/003> boot.img
<ID:0/003> FAIL! (Erase)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
zayra.qu33n said:
Still failed to flash... using the firmware above
================
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> hyp.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> sec.dat
<ID:0/003> boot.img
<ID:0/003> FAIL! (Erase)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Sorry to hear that.
Which version of Odin u use? try with Newest version 3.12.x Odin and other different versions too.. It does the trick sometimes..
And in option TAB, tick on Repartition mode.
RidzVarn said:
Sorry to hear that.
Which version of Odin u use? try with Newest version 3.12.x Odin and other different versions too.. It does the trick sometimes..
And in option TAB, tick on Repartition mode.
Click to expand...
Click to collapse
i tried with Odin v1.85, v3.04, v3.07, v3.10, v3.12.5, v3.12.2, v3.12.3, v3.13.1B_Patched but no different result .... still failed with same error message..
just stuck in boot.img.....
maybe the problem is debugging mode on my device is disabled and i dont know how to enabled it because the device stuck in Odin Mode.
i found this article to enabled debugging mode but i dont know how to using ADB – USB Debugging.
https://www.isrgrajan.com/how-to-enable-usb-debugging-in-android-using-recovery-mode.html
zayra.qu33n said:
i tried with Odin v1.85, v3.04, v3.07, v3.10, v3.12.5, v3.12.2, v3.12.3, v3.13.1B_Patched but no different result .... still failed with same error message..
just stuck in boot.img.....
maybe the problem is debugging mode on my device is disabled and i dont know how to enabled it because the device stuck in Odin Mode.
i found this article to enabled debugging mode but i dont know how to using ADB – USB Debugging.
https://www.isrgrajan.com/how-to-enable-usb-debugging-in-android-using-recovery-mode.html
Click to expand...
Click to collapse
I dont think so.. Debugging mode is not needed when flashing via Odin. but I'm more to doubt of corrupted bootloader.
Can u enter Recovery mode by any chances? Vol Up + HOME + Power.
And if yes, are u using Custom Recovery or stock?
Try to flash only recovery to TWRP
REFER HERE :
https://forum.xda-developers.com/grand-prime/general/twrp-odin-flashable-tar-md5-official-t3550153
The recovery mode was missing..i cant accsess anymore to recovery mode...
zayra.qu33n said:
The recovery mode was missing..i cant accsess anymore to recovery mode...
Click to expand...
Click to collapse
Try to flash Recovery.img only using Odin. Dowmload TWRP recovery.img from link given above and see if it work.
Best of luck!
Having a difficult time here.... I've got a Galaxy s8 Sprint variant.. I downloaded the Beta one UI firmware, not official just used ODIN. I'd like to go back to stock and update to newest official release, or just go straight to the latest release. I don't care if it's rooted/unlocked or whatever just stock Sprint software. I've tried a couple of stock firmwares but I keep getting errors in Odin. Currently I"m on PDA G950U1UEU5ZSAB CSCG950U1OYM5ZSAB .
Any pointers would be greatly appreciated.
tri0xinn said:
Having a difficult time here.... I've got a Galaxy s8 Sprint variant.. I downloaded the Beta one UI firmware, not official just used ODIN. I'd like to go back to stock and update to newest official release, or just go straight to the latest release. I don't care if it's rooted/unlocked or whatever just stock Sprint software. I've tried a couple of stock firmwares but I keep getting errors in Odin. Currently I"m on PDA G950U1UEU5ZSAB CSCG950U1OYM5ZSAB .
Any pointers would be greatly appreciated.
Click to expand...
Click to collapse
What errors are you getting with Odin?
What firmware are you trying to flash?
spawnlives said:
What errors are you getting with Odin?
What firmware are you trying to flash?
Click to expand...
Click to collapse
I'll cut and paste it.. but the phone says SW REV CHECK FAIL : {ab}{FUSED 5 > Binary 2
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
tri0xinn said:
I'll cut and paste it.. but the phone says SW REV CHECK FAIL : {ab}{FUSED 5 > Binary 2
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
2 things I can see
1. Use Odin version 3.13.1 it supports the new compression format of newer firmware.
2. The software check fail is due to trying to flash older firmware than what is on your phone. You will need to download firmware with a bootloader version 5 ( 5th number from right of firmware(PDA) name ).
OP can you confirm if it worked?
Hey, THanks a ton.. worked! I don't think I woulda figured that out unless I would have happened to tried a rom with the correct bootloader version. Really appreciate it. One more thing.. which should I use normally.. the home_csc or the csc. I've been using the home one since that's what I see a majority of people using but I don't see any explanation.
thanks again!
tri0xinn said:
Hey, THanks a ton.. worked! I don't think I woulda figured that out unless I would have happened to tried a rom with the correct bootloader version. Really appreciate it. One more thing.. which should I use normally.. the home_csc or the csc. I've been using the home one since that's what I see a majority of people using but I don't see any explanation.
thanks again!
Click to expand...
Click to collapse
Glad you got it sorted
Home_CSC - will keep your apps and data.
CSC - clean install same as a factory reset.