Is it possible to enable fast charging using franco's kernel version r18. I recently tried to download the app called fast charge but it said that fast charge wasn't available for this kernel.
Also can someone provide me the instructions to enable fast charging if it's possible.
Thank you.
Should be possible. It's in the Franco Kernel Updater app.
Sent from my Nexus 4, powered by CyanogenMod via XDA Developers app.
called ienotiu
Thanks I was able to find it. :laugh:
Related
Hello,
i'm using a custom rom like Ozcan rom.
this rom is perfect for s5 apps but this rom has few problems not sure with anyone but me fastly battery draining and charging is very slow
this problem comes with this rom this is modem or kernel problem or any other problem,
battery 100% charging with original charger (2A) and original cable in 4 to 5 hours before on any custom rom battery normally 100% 1 hour and
30 or 40 minute.
any solution plz share with me,
thanks
Same here...
Enviado desde mi GT-I9500 mediante Tapatalk
Best Modem is the Chinese one.. XXUGNF6. . use the search to fine download link.
I too use Ozcan rom stock kernel v4.0. It takes 2 hours max to charge full.
deepaksupercool20 said:
I too use Ozcan rom stock kernel v4.0. It takes 2 hours max to charge full.
Click to expand...
Click to collapse
but problem comes with me
___A said:
Hello,
i'm using a custom rom like Ozcan rom.
this rom is perfect for s5 apps but this rom has few problems not sure with anyone but me fastly battery draining and charging is very slow
this problem comes with this rom this is modem or kernel problem or any other problem,
battery 100% charging with original charger (2A) and original cable in 4 to 5 hours before on any custom rom battery normally 100% 1 hour and
30 or 40 minute.
any solution plz share with me,
thanks
Click to expand...
Click to collapse
Well brother..
Dowbload Galaxy Current Charging frrom playstore and see the Ma that are coming from your charger.
Charging from an original cable does not guarantee a hardware glitch in the charger, like a bad data cable after prolonged use.
Anything less than 1000ma is not a good report. If thjs happens, charge it with another data cable and see if the Ma change.
If nothing happens, try changing the kernel..there is nothing wrong with the rom for sure.
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
DeepankarS said:
Well brother..
Dowbload Galaxy Current Charging frrom playstore and see the Ma that are coming from your charger.
Charging from an original cable does not guarantee a hardware glitch in the charger, like a bad data cable after prolonged use.
Anything less than 1000ma is not a good report. If thjs happens, charge it with another data cable and see if the Ma change.
If nothing happens, try changing the kernel..there is nothing wrong with the rom for sure.
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Click to expand...
Click to collapse
thanks
i will check and reply soon
Galaxy charging current Shows
Reference: 1100mA
Maximum: 1900mA
Average: 1100mA
my problem is solved by Ocan rom new version 5.0
because Ozcan devolper use indie kernel (Omega Droid)
now my phone is charging normally
___A said:
my problem is solved by Ocan rom new version 5.0
because Ozcan devolper use indie kernel (Omega Droid)
now my phone is charging normally
Click to expand...
Click to collapse
Hi could u please share the compiled zip file which u have flashed
srtsjs said:
Hi could u please share the compiled zip file which u have flashed
Click to expand...
Click to collapse
Well he flashed the full rom and omega kernel is a part of it..
You can download omega files from the playstore and download only the kernel from there..
Sent from my Ozcan GT-i9500 using XDA mobile app
thank you very much for your quick reply
srtsjs said:
thank you very much for your quick reply
Click to expand...
Click to collapse
Better press than say
Sent from my Ozcan GT-i9500 using XDA mobile app
which kernel should I installon i9500 4.4
Q&A for [KERNEL] [N4] [5.0][3.4.104][CC4.9.2][AOSP/CM] [11/22] [v.500] - AK
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] [N4] [5.0][3.4.104][CC4.9.2][AOSP/CM] [11/22] [v.500] - AK. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
N/A
N/A
First Time Using Ak
Hello guy today is my first time using Ak kernel v600 so i want to ask setting for battery n performance using syanpse annyone??And can annyone tell me the different bettweenn Intelliplug vs Msm ??hope annyone can help me tq
LolHacker17 said:
Hello guy today is my first time using Ak kernel v600 so i want to ask setting for battery n performance using syanpse annyone??And can annyone tell me the different bettweenn Intelliplug vs Msm ??hope annyone can help me tq
Click to expand...
Click to collapse
Personally, for the Governor I use Ondemand, I/O to SIO. Use MSM Hotplug (not intelliplug), change Max CPUs boosted to 2, Max CPUs Screen Off to 2. And Undervolt as much as you can, but keep the system stable. Mine can go as low as -100mV for all, but keep [384,270, 162, 81] Mhz at 750mV. For me, when my phone is idle, even with LTE on, it'll only lose 1% per hour.
Your overall battery life will depend on how you use your phone on a daily basis. I'd prefer Greenify to keep apps asleep when they're supposed to be.
My settings may or may not work for you. They're just to guide you, so tinker with what you know and see what works best.
ak with crdroid
I can't use ak kernel with crdroid rom "nexus 4"
Freeze and random reboot
How do you import profiles in Synapse? I tried importing one of Gorilla P's profiles (from his Mako Stuff folder), but i get invalid file type. I've been looking all over for documentation, but can't find anything.
Thanks.
Nevermind. I found the answer to my question here.
Hi guys.
I'm new to the forum and ive flashed CM12 nightly for my nexus4..thr is a screeshot below.. I need u ppl to suggest me some kernels which are stable and suitable for N4 cm12, an which would give me gud battery life, double tap wake an swipe to sleep and OTG feature.
Sd card not found
HI
I've tested kernel
I am so happy
But I have a problem with it
Now, my 5.0.2 CM rom AND I does not detect sd card AND ES File explorer can not read the sdcard folder. However, in TWRP, my sd card folder shows up. I tried to reinstall ak kernel, but the problem persists.
Any fix? Thanks!
how to remover that AK banner when booting up?
Guys I have an externally powered otg cable that I've been using for quite some time now on my nexus 4. Used to work fine on KitKat with ak kernel. But isn't working now on Lollipop.
Any idea as to what might be going wrong?
Sent from my Nexus 4 using XDA Premium 4 mobile app
innocentdevil.sid007 said:
Guys I have an externally powered otg cable that I've been using for quite some time now on my nexus 4. Used to work fine on KitKat with ak kernel. But isn't working now on Lollipop.
Any idea as to what might be going wrong?
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Works for me, but I have to use the Stickmount app.
shawnbrennan55 said:
Works for me, but I have to use the Stickmount app.
Click to expand...
Click to collapse
I have tried stickmount in the past as well. It shows that the storage device is mounted, but I can't however find it in ES Explorer
Sent from my Nexus 4 using XDA Premium 4 mobile app
MinimalOS
Hi, I can't reply to development treat so xda send me here. I have found MinimalOS in the repository for AK and I can't find much info about it. What is it about?. Thanks for your attention.
AK
The last version works fine for me, euphoria 5.0.2
Cm12.1 5.1.1
When will u make cm12.1 compatible kernel..
Waiting for quite long...
N r there any chances of it having otg support.
Thanks
Mohit31 said:
When will u make cm12.1 compatible kernel..
Waiting for quite long...
N r there any chances of it having otg support.
Thanks
Click to expand...
Click to collapse
The "AK.600.MAKO.CM" is compatible with cm12.1. And yes. It supports otg as well
Sent from my Nexus 4 using XDA Premium 4 mobile app
v246 on CM11S
Hello,
can I flash v246 kernel on CM11S, if not what should i do to get it working on CM11S.
Problem when using VPN server
I having problem while using vpn. No internet at all after the vpn connection are turned on.
I'm using AK R3 build on stock AOSP.
I get noticeable display enhancements on cm when I flash "AK.600.MAKO.CM". But however that's not the case when I flash "AK.R3.MAKO.CM" on the same rom or "AK.R3.CM" on any AOSP build. I tried changing the gamma calibration values but still no change. I want a stable kernel but I can't settle for a "white-ish" (normal nexus 4) display anymore after having used AK.600.MAKO.CM for so many months.
Could you guys help me around with this
Sent from my Nexus 4 using XDA Premium 4 mobile app
AK R4 kernel
Hey @CallMeAldy
What is an ETA of new R4 Kernel?
Thanks for help
Delgon
Hello, I am currently using Resurrection Remix 5.5.7, With @RenderBroken Kernel R3, I already flashed Render's UKM and also using synapse however i can't seem to find the FastCharge options, Charging the battery would take me 3 hours to complete its seems like the fastcharge is disabled can someone help me out with this one. Thanks!
in devlopper option open kernel toolkit then choise battery and u will see fast charge
amin44 said:
in devlopper option open kernel toolkit then choise battery and u will see fast charge
Click to expand...
Click to collapse
What do you mean kernel toolkit? I cant seem to find it ib Dev Options.
Sent from my LG-D802 using Tapatalk
i am sorry that wrong name i mean kernel auditor @b4mb1_
Even in Kernel Auditor the option for fast charge is not available.
Sent from my LG-D802 using Tapatalk
Hello guys.. I am using ResurrectionRemix 5.8.5. It takes so long time to charge. Does this kernal support fast charging. If yes how to enable this?? Plz give me some detail information.
pradipbaral3 said:
Hello guys.. I am using ResurrectionRemix 5.8.5. It takes so long time to charge. Does this kernal support fast charging. If yes how to enable this?? Plz give me some detail information.
Click to expand...
Click to collapse
Stock kernel dont have fast charging...flash any custom kernel and use kernel auditor to enable fast charge dt2w etc features
pradipbaral3 said:
Hello guys.. I am using ResurrectionRemix 5.8.5. It takes so long time to charge. Does this kernal support fast charging. If yes how to enable this?? Plz give me some detail information.
Click to expand...
Click to collapse
There are so many custom kernels in XDA like phantom etc
Flash any one kernel which enable fast charge and use app like kernal auditor for enabling fast charge mode
Hello guys I know our developers are busy in making rom and kernel
But i wanted to know how to enable fast charge in miui 9 Redmi 2 prime rom.
Well I know its a kernel feature so if I want to add this feature I have to make a kernel for miui 9 which is quite difficult for me because I have no idea how to make a kernel.
But with some support may be I can.
I only want fast charge mods nothing else
So please tell me how to add this feature in miui 9.
Yes,there are rom available for this device which supports this feature but those rom have other bugs so,I want to try to edit stock kernel and add this feature myself although a custom kernel for miui8 is available but it make bootloop on miui9
So, request the developers to please guide me to make miui 9 kernel if possible
Thanks
Flash jerrica kernel for lp...install kernel auditor (give root permission) go to battery option in it...enable fast charge.
If bootloop in miui 9 wait for the next build.
If u use fastcharge use with the 1000 amps (default redmi charger) if u keep using in 2000 amps charger with fast charge ur battery will become swollen (happened to me...no bkup upto an hour now...had to replace the battery from mi service center for 600 ₹)
Riyanx55tu said:
Flash jerrica kernel for lp...install kernel auditor (give root permission) go to battery option in it...enable fast charge.
If bootloop in miui 9 wait for the next build.
If u use fastcharge use with the 1000 amps (default redmi charger) if u keep using in 2000 amps charger with fast charge ur battery will become swollen (happened to me...no bkup upto an hour now...had to replace the battery from mi service center for 600 ₹)
Click to expand...
Click to collapse
Yes,flashing jerrica kernel causes bootloop anyway i am not using any 2 amp charger although i am using official mi power bank 2 (20000mah ) which supports quick charger 3.0 that's why i want fcon kernel well i know fast charger and quick charger are different things but fc reduce the charging time
amitpartial said:
Yes,flashing jerrica kernel causes bootloop anyway i am not using any 2 amp charger although i am using official mi power bank 2 (20000mah ) which supports quick charger 3.0 that's why i want fcon kernel well i know fast charger and quick charger are different things but fc reduce the charging time
Click to expand...
Click to collapse
Use Miui 8 Stable with Jerrica kernel..and enable fast charging option through kernel auditor.
Riyanx55tu said:
Use Miui 8 Stable with Jerrica kernel..and enable fast charging option through kernel auditor.
Click to expand...
Click to collapse
Good idea