Related
So I just got the new Epic from Sprint, and I just put on some videos. All of them work, EXCEPT FOR ONE.
I had recently created a video using Adobe Premiere in CS5. It output to MP4 with AVC/AAC (LC) codecs. It plays fine on my computer, my Samsung TV, and even my Samsung Blu-ray player (they all have USB ports for digital media), but no luck with the phone. The phone says displays "unsupported file type," and promptly returns to the gallery.
I have looked at the posted file and codec support, and so I converted copies of the original file to:
MP4: H.264, AAC
MKV: H.264, AAC
DIVX: AVI, MP3
But they all yield the same disappointing result: "unsupported file type." What else could I possibly try to make this play?
P.S. The supported file and codec list that I found is located here (apparently, I don't yet have enough posts for the site to let me link to the rest of the internet):
*ars.samsung.com/customer/usa/jsp/faqs/faqs_view_us.jsp?SITE_ID=22&PG_ID=0&AT_ID=316039&PROD_SUB_ID=0&PROD_ID=559&EMAIL_ID=*
Go to the market and download RockPlayer
Technically, the player was successful in opening the video, since it has a choice of "software decoding" and "hardware decoding" mode. "Software decoding" mode made the video lag the audio big time (>1 sec into playback before lag started). Selecting "Hardware decoding" mode for the file returns the error "This file cannot be played with System Player." After some digging on the company's website, it says that the "software decoding" mode can play just about anything, and while the System Player integrated into Android itself can only play a limited list of files, the System Player can use hardware acceleration.
So the question of the day becomes, is there a media player app that doesn't rely on the System Player for hardware acceleration?
Rockplayer is it...
What is the resolution of your video? 1080p? 720p? (1080p wont work from what I hear..even though Hummingbird does support it :/)
Also, is your audio 5.1? try removing the audio from your file and see if the video works.
Yeah, the video was coded into 1080p. The software decoding mode will play it, but it lags a lot. If Hummingbird CAN handle the hardware decode, then my issue is with the Android System Player's ability to use the hardware, right? If so, is it that Android doesn't like 1080p period, or is it a matter of using a separate program that CAN use the hardware effectively?
The audio plays without a hitch. It's coded for just simple stereo.
Dante of the Inferno said:
Yeah, the video was coded into 1080p. The software decoding mode will play it, but it lags a lot. If Hummingbird CAN handle the hardware decode, then my issue is with the Android System Player's ability to use the hardware, right? If so, is it that Android doesn't like 1080p period, or is it a matter of using a separate program that CAN use the hardware effectively?
The audio plays without a hitch. It's coded for just simple stereo.
Click to expand...
Click to collapse
Yes the 1080p is your issue..software decode is always a lot slower..while the Hummingbird does support 1080p, either Samsung did not include the drivers to make it happen or it is an Android limitation I am not sure...but its 100% in the Hummingbird specification..so its not impossible... just someone has to figure out how lol
For now your best bet is to re-encode it to 720p and you will be fine.
Hi,
I got some 720p files (mkv and mp4) that (probably) would not work on Xoom and definitely do not work on ma LG dvd player with usb and divix support. Dvd plays avi and normal divix... no HD, no fancy stuff (I got it connected to an old 21" CRT TV - dont have LCD HD).
Question:
What software (free) should I use to convert them to a format that will work on both - Xoom (in future) and dvd player?
Hand brake is pretty good... rock player is a good player for mkv
Sent from my Xoom using XDA App
it has to be plain avi file in order to play on dvd. Will avi play on xoom?
galtom said:
it has to be plain avi file in order to play on dvd. Will avi play on xoom?
Click to expand...
Click to collapse
WHAT? A DVD is MPEG only http://en.wikipedia.org/wiki/Dvd_video#Container
Also know an AVI is a container not a format. It is about the oldest thing out there videowise introduced 1992 by Microsoft.
Now you may have a DVD player that plays files and supports the DV-AVI container for playback. Never seen one though. Anyway...
If you buy a newer BlueRay player, like one from Samsung, it will support DVDs, MPEG2, H.264, VC-1, AVCHD, DIVX HD, MKV, MP4, WMV9, 3GPP, HD JPEG so you won't have to worry about converting anything more than once.
Can anyone answer this question for me. I have a bunch of bluray rips in .iso format. How can I convert them to load on the xoom?
DebianDog said:
WHAT? A DVD is MPEG only http://en.wikipedia.org/wiki/Dvd_video#Container
Also know an AVI is a container not a format. It is about the oldest thing out there videowise introduced 1992 by Microsoft.
Now you may have a DVD player that plays files and supports the DV-AVI container for playback. Never seen one though. Anyway...
If you buy a newer BlueRay player, like one from Samsung, it will support DVDs, MPEG2, H.264, VC-1, AVCHD, DIVX HD, MKV, MP4, WMV9, 3GPP, HD JPEG so you won't have to worry about converting anything more than once.
Click to expand...
Click to collapse
actually a ton of dvd players play avi divx/xvid, it's almost hard to find one these days that doesnt.
Sent from my PC36100 using XDA Premium App
fishtaco254 said:
Can anyone answer this question for me. I have a bunch of bluray rips in .iso format. How can I convert them to load on the xoom?
Click to expand...
Click to collapse
you ripped them to iso? that's kind of strange, never heard of someone doing that before.
Sent from my PC36100 using XDA Premium App
An ISO is actually a mountable image I do not think the Xoom can mount one.
http://en.wikipedia.org/wiki/Iso_image
OneStepAhead said:
actually a ton of dvd players play avi divx/xvid, it's almost hard to find one these days that doesn't.
Click to expand...
Click to collapse
Yes I know just an example. The problem with AVI is people stick so many different things in there or put an AVI extension on a file that is not really an AVI. Many times these days it is actually DivX which is just MPEG-4 Part 2 or 10 anyway. After my last post I started plowing though all the old AVI files on my computer and about the ONLY player that would play 100% of them was VLC.
I also downloaded the Rockplayer ARM7 edition since there is not a 9 out and loaded it on my Zoom. It seems to FC if you hold the Xoom in portrait mode but works fine in landscape. Plays most formats but seems to not run any of my old AVI files.
@OP
Mount the ISOs onto a virtual drive (eg http://www.dvdfab.com/virtual_drive.htm ). Then run Handbrake or whichever app you're using. As long as they can process Bluray's M2TS format, you're peach. May be.
@DebianDog
When people say "AVI", especially ones they didn't make, it's generally a warez version which means XviD/DivX, and MP3 or AC3. Pretty common stuff. @OP: You need a 3rd-party player to play AVI, like the mentioned Rockplayer.
Right...
My player is LG DVX 392H.
I got no idea about specifics of the file but in windows it says .avi and it plays
If you need more information to help me, please let me know how can I get them out of the files in question (I do not have any experience with video files as Windows simply plays the lot so one does not need to worry - klite and all sorted).
Since I plan to get Xoom and I have come to terms with necessity of converting I would prefer the option to have it play on both devices...
Thanks guys!
Ps. Got handbrake but it says only about Apple devices and after few tries id did not work on dvd player (from usb stick) either no file was shown or it said can not play HD content (there was only audio).
I didn't convert them to iso. I uh just received them in iso format if you catch my drift...
@galtom
You don't have to do any conversion for (most) AVIs. Just get a 3rd-party media player. Some AVIs may have AC3 audio tracks which aren't natively supported, but software players like Rockplayer can handle those.
To get video specs, use MediaInfo http://mediainfo.sourceforge.net
@fishtaco254
Most HD ISOs nowaday are either in AVCHD format (likely) or Bluray (M2TS). Either way, you'll need to mount them and convert, or wait until XBMC for Android comes out.
I know that with avi I am (mostly) OK.
But I also have a lot of 720p files described in Windows as Matroska/mkv
These videos do not play on my dvd/usb player and I doubt they would on Xoom.
So .. back to question no 1 - what would be the easiest way to convert them to a format that will be accepted by both devices.
I think I might have the answer:
http://bit.ly/fFDcQ6
"Convert Videos For Android And iOS The Easy Way
By Sahas Katta March 19, 2011 09:19 PMAdd Comment
A question that comes up often? “How do I convert videos for my Android or iOS device?” Apple iPhone users have iTunes for optimizing video, but the program lacks support for many popular formats. On the other hand, Google does not even offer a desktop client for managing multimedia. Our friends at Lifehacker and Tested each featured potential solutions, but I think the following solutions is even better: Miro Video Converter. While there are hundreds of apps that offer similar capabilities, this one is by far the easiest to use, is entirely open source, and actually looks fancy.
How To Convert
Drag a video onto Miro Video Converter.
Select a preset from the drop down menu.
Hit convert, wait a few minutes, and that’s it!
You do not have to deal with aspect ratios, codecs, frame rates, resolutions, or any other technical jargon for that matter. In fact, those options are not even available for reconfiguring. One the progress bar hits 100%, the newly optimized video will appear besides your original file in the same folder.
Supported Devices
Miro Video Converter includes defaults for about eight Android devices and four Apple devices. The Sony PSP is also a preset for those that still use one. I should note that the listed Android smart phones are last generation models. The Atrix, Droid 2, and Droid X, and other recent ones are missing from the list. With that being said, the MP4 preset worked perfectly on the EVO and Thunderbolt. I am also doubtful that the program takes full advantage of the high-resolution playback capabilities of the new iPhone 4 and iPod touch, but converted videos still play without any glitches.
Supported File Formats
I dragged several video files into Miro Video Converter from various sources including Apple iTunes Podcasts, DVD rips, YouTube downloads, Vimeo files, and more. Every file was immediately recognized. For the geeky, the supported formats include AVI, H264, MOV, WMV, XVID, Theora, MKV, and FLV. The program can re-encode them to variations of MP4, Ogg Theora, or WebM.
Other Thoughts
Although I am definitely a fan of Miro Video Converter, I still keep Handbrake on hand. The latter is also open source and offers hundreds of exporting options. Those come in handy at times when you have a device that requires a peculiar resolution or another setting. I would definitely like the team at Participatory Culture Foundation add more presets for recently popular device and possibly even tablets. For the most part, Miro Video Converter should get the job done for most Android and iOS users. The program runs on both Macintosh and Windows, which should cover most grounds too."
http://www.mirovideoconverter.com/
I will give it a shot in few minutes.
edit:
I have converted mkv file into mp4 file. No luck.
Dvd is not playing that + "original" file was 500MB larg after conversion it had over 3GB!!!
It is not working for me... + it has no xoom/android 3.0 pre-set :-(
Maybe next update will change that.
Your DVD player only plays AVI, i.e. DivX+MP3. HandBrake no longer converts to DivX nor AVI, because they're obsolete.
Try using Miro to convert to AVI. You need to resize 720p to standard-def, else the DVD player will choke. If Miro doesn't do this, try another software.
Go here, http://videohelp.com/tools/sections/video-encoders
An alternative is to get a media player that can play MKV.
i think maybe the moboplayer can help you, it supports almost any video formats, and the effect is pretty good.
and rip your DVD or blu-ray? i have used the handbrake, it's great. my friend said she has used a ripper called brorsoft, it has free trial version, also pretty good.
you can have a try
Just download dice player and you can play .mkv files without having to convert them.
Sent from my HTC Sensation Z710e using XDA Premium App
fishtaco254 said:
Can anyone answer this question for me. I have a bunch of bluray rips in .iso format. How can I convert them to load on the xoom?
Click to expand...
Click to collapse
You can convert them to the videos of avi or mp4 format which is compatible with the Xoom and can be played on most of suitable players.
As for the converter, I recommend you the brorsoft video converter which I'm using now. I'm quite satisfied with the convenient performance, the great interface as well as the quality of the converted videos. I think you can try to convert your iso foles to avi or mp4 format via this converter.
If you have many blu-rays, you can choose the blu-ray ripper which can rip and convert your blu-rays to HD avi or mp4 format. It can save a lot of time.
One thing I must to say is the amazing speed. With the CUDA tech, it si almost 5X faster than those I have used before.
As for the player, I think the mobo player and the rockplayer are the best. I can play all my moives of avi and mp4 format on the two players with full screen. You can try them.
Video formats and convertors
Android plays.mkv files fine.
Mkv is a container ,chose H264 as video codec and AC3 as audio codec.
Some of the best convertors are:
Formatfactory
Super(erightsoft)
Handbrake
all 3 produce excellent files.And all are free.
Handbrake is not obsolete(it was a deliberate decision to drop .avi) as it is now focused for Apple devices.
................
I have LG BD390(bed room) and BD570(living room) bluray players connected to HD TVs, and a Verizon 3G Xoom.
I generally RIP my Bluray discs to MKV's using BD-Rebuilder's "movie only, alternate output" and specifying an 8gig output file. While these look great on the TV's, the XOOM can't play them back properly (and lets face it, at 8ig per movie, I wont fit too many on the Xoom)
So, I've used DVDCatalyst to convert DVD's and the home made (as well as downloaded) MKV's into files that I can play on the XOOM using MOBOPlayer. The video files end up in the 2 to 3gig range.
Those same files made with DVDCatalyst will also play back on the LG's across the network, but on my HD TV, don't look as sharp and clear due to the reduced settings which make the file sizes so much smaller.
I haven't tried DVDCatalyst to go from Bluray source to Xoom formatted file yet, as its release notes list "limited support" for this.
dice player
why convert?? use dice player to play 720p mkv!!!
I am a new Nook user.
So far I was using a noname chinese tablet (TCC8902-based at 720MHz) and I am used to be able to play any video. The screen quality was pretty bad, but it played absolutely everything i dropped to it.
Now, I upgraded to nook and was planning to enjoy it's excellent screen, but found out that it just doesn't play more than a half of video files that I have. I tried both native Nook FW (videoplayer reports "video is not supported") and CM7 installed on uSD - ES File Managers player (that I mostly used on my old tablet) just doesn't play them without any message.
I would expect Nook's hardware including video accelerator to be more advanced than TCC8902 but looks like there are some restrictions.
Is there anywhere a list of video/audio formats and codecs that are and that are not supported? I was trying to search, but couldn't find one.
Is there any chance that my device has some hardware issues? I think it's unlikely since everything else works fine, but may be?
Try getting MX video player from market.
Get Rock Player Lite
Thanks guys, I will definitely give a try to these players tonight (don't have Nook with me at work).
But as far as I understand all these players are just a front end GUI. Most if not all of the streams parsing, decoding and displaying is done by HW (unless we are talking about software video decoding which I don't consider). Apparently the player i used (built into ES file explorer) is clever enough to pass data to HW since it works fine on inferior tablet.
I am quite sure a question of video support on Nook has been discussed in details, I just couldn't find anything. Could anyone please point me to any good discussions covering this topic?
I'll add a nomination for MoboPlayer. It uses software decoding to play files not supported by hardware.
Also, download Handbrake and search for the suggested Nook settings to convert video files for optimal playback.
Edit: I wanted to add that yes, getting a special video player & converting files is a bit more complex than just dropping the file onto the tablet and playing it. But let's not lose sight of the fact that we're trying to use an eReader to play large, usually HD videos. The fact that it can do it at all is pretty awesome.
Hi,
I'm a new nook owner, but I'm not new to Android (I've had a Galaxy S for some time now). I just received my 'new' nook which came with CM7.10 (CWK74) on it and it's working fine except for hardware acceleration for video playback. I've tried a couple of HW accelerated players (Dice & BS Player), but neither of them seem to be able to play anything back using HW mode, only SW. I've tried a number of different files, both HD & SD, no difference.
Interestingly, Dice seems to at least try to play in HW mode, (the HW indicator shows when you initially try to play a file) but then immediately falls back to SW mode.
Anyone got any suggestions as to what might be going on here?
The videos are most likely not encoded properly for the nook... either the frames are too large or they aren't in h.264
DizzyDen said:
The videos are most likely not encoded properly for the nook... either the frames are too large or they aren't in h.264
Click to expand...
Click to collapse
So are you saying that in order for hardware decoding to be available, the videos must be encoded in a certain format? My Samsung Galaxy S plays the same videos in Dice with HW decoding without any issues (I know it's different hardware, but the principal's the same; I have not re-encoded the files for my Samsung and they play fine).
it seems from my experience anyway playing larger files or hd type that arent in h.264 lag some
envied said:
it seems from my experience anyway playing larger files or hd type that arent in h.264 lag some
Click to expand...
Click to collapse
So is your player in HW decode mode?
atm im using an ICS version and not CM7 so I cant tell you for sure and I dont really remember if it was or not. Head hurting so cant think atm sorry.
I've never had much luck with DSP video acceleration of H.264 on the NC with the various video players. But YouTube and Netflix do work mostly fine and they use DSP playback.
The problem is that the drivers and kernel for the Nook Color are a bit of a homebrew collage and there are problems. The devs do the best that they can with what B&N provides and with what can be scraped together from other devices.
This is probably not anything new, but I didn't see it on Google so here we go:
Play any video file on Amazon Fire TV:
1) Get StickMount + install: http://www.firetvnews.com/how-to-play-media-files-from-external-usb-storage-on-amazon-fire-tv/
-- Yes you will need root: link in link above
2) Get MX Player: http://apps.evozi.com/apk-downloader/?id=com.mxtech.videoplayer.ad
3) Sideload VLC just like you did with stickmount
Profit
edit:
I think this VLC works better. Still a little buggy. BUT 100% better than nothing
2) Get VLC: http://apps.evozi.com/apk-downloader/?id=the.joevlc
edit 2
Replaced this VLC with MX it squashes bugs and wiorks 100% on FireTV, and H/w acceleration works just fine
http://apps.evozi.com/apk-downloader/?id=com.mxtech.videoplayer.ad
What about music files?
I want to play some extremely high quality FLAC files (96khz 32bit and higher) that don't initially work on most devices.
I normally had to re-convert my 96khz 32bit FLAC files to a measly 44khz 24bit so they can play on my Trio T4300.
Can someone reccommend a way to play audiophile quality flac files on Fire TV?
Maybe some custom FLAC codec to install for obtaining higher quality FLAC support.
retroben said:
What about music files?
I want to play some extremely high quality FLAC files (96khz 32bit and higher) that don't initially work on most devices.
I normally had to re-convert my 96khz 32bit FLAC files to a measly 44khz 24bit so they can play on my Trio T4300.
Can someone reccommend a way to play audiophile quality flac files on Fire TV?
Maybe some custom FLAC codec to install for obtaining higher quality FLAC support.
Click to expand...
Click to collapse
For both broad video file format support and FLAC support, I recommend XBMC. You will find that a keyboard is helpful to connect when first setting it up if you're looking to define file paths on your home network. I play my media off of a NAS and XBMC is quite nice.
Adding it to the homescreen can be done by installing Lama, and then using a "sacrificial app" to launch xbmc as a condition of, essentially - you set a Lama trigger that says "when app X is running, run XBMC."
All of that can be done with sideloading - no root required, and although I used root to replace the Fire launcher with XBMC as a launcher, I'm told you can do the launcher swap with Lama as well.
Is there any less diffifcult app to install alongside a codec with full FLAC support.
I don't really care all that much about xbmc because it is designed like a swiss army knife for media when all I need right now is a standalone FLAC player with full 96khz+ and 32bit support.
roustabout said:
For both broad video file format support and FLAC support, I recommend XBMC. You will find that a keyboard is helpful to connect when first setting it up if you're looking to define file paths on your home network. I play my media off of a NAS and XBMC is quite nice.
Adding it to the homescreen can be done by installing Lama, and then using a "sacrificial app" to launch xbmc as a condition of, essentially - you set a Lama trigger that says "when app X is running, run XBMC."
All of that can be done with sideloading - no root required, and although I used root to replace the Fire launcher with XBMC as a launcher, I'm told you can do the launcher swap with Lama as well.
Click to expand...
Click to collapse
I have had no luck with XBMC seeing thins on SUB sticks. It see the stick and folder, but will not find videos.
it was one of the first apps I installed...
DHO said:
I have had no luck with XBMC seeing thins on SUB sticks. It see the stick and folder, but will not find videos.
it was one of the first apps I installed...
Click to expand...
Click to collapse
Interesting. I just installed stickmount to test (I mostly have my keyboard in the USB slot) and was able to play a FLAC file, an AVI, a WMV and an MP4 file from the USB stick I put in.
I'm using the 13.1 that was modified to behave as a launcher, but as far as I know it's otherwise a pretty standard 13.1 build.
---------- Post added at 12:29 AM ---------- Previous post was at 12:28 AM ----------
retroben said:
Is there any less diffifcult app to install alongside a codec with full FLAC support.
I don't really care all that much about xbmc because it is designed like a swiss army knife for media when all I need right now is a standalone FLAC player with full 96khz+ and 32bit support.
Click to expand...
Click to collapse
Try sideloading MixZing? I think it does FLAC. I really like it on my phone and it knows about folders, which is helpful.
I found a better one called JetAudio Basic.
It even has playback speed control with or without pitch shift.
I downloaded a 192khz 24bit FLAC test file,and it plays perfectly!
Edit:I found an even better one called DeadBeef.
I hope it isn't downsampling the 192khz FLAC file when playing it.
If so,can somebody reccommend a guaranteed 192khz FLAC player app?
I just updated OP, this app works MUCH better
http://apps.evozi.com/apk-downloader/?id=com.mxtech.videoplayer.ad
In settings, you can check to make it function as an audio player too
IF amazon would just include this app,... and USB mount I would have no reason to root this box. Beyond ridiculous they cripple obvious features that are build into android (what their box is based on.)
DHO said:
This is probably not anything new, but I didn't see it on Google so here we go:
I think this VLC works better. Still a little buggy. BUT 100% better than nothing
2) Get VLC: http://apps.evozi.com/apk-downloader/?id=the.joevlc
Click to expand...
Click to collapse
The KFTV does not respond to any remote commands when playing a video in VLC. Not able to play/pause, rew/ff, etc. Any idea how to get it working proper?
mjbxx said:
The KFTV does not respond to any remote commands when playing a video in VLC. Not able to play/pause, rew/ff, etc. Any idea how to get it working proper?
Click to expand...
Click to collapse
hey use bsplayer, it works great. the fire tv remote works and it have dts. here's a link http://www12.zippyshare.com/v/69008312/file.html if you have a problem sending it through adb just rename it just bsplayer.
Ah yes.. I sideloaded this player to the wimpy firetv stick .. It works perfectly.. VLC seemed to want more power than the stick can provide. The combination of upnplay and bsplayer has worked out wonderfully..
retroben said:
I found a better one called JetAudio Basic.
It even has playback speed control with or without pitch shift.
I downloaded a 192khz 24bit FLAC test file,and it plays perfectly!
Edit:I found an even better one called DeadBeef.
I hope it isn't downsampling the 192khz FLAC file when playing it.
If so,can somebody reccommend a guaranteed 192khz FLAC player app?
Click to expand...
Click to collapse
* plays files with up to 192KHz sampling rate, including 24 bit and multichannel files
For anyone reading this thread in 2016, don't waste your life on the advice here: just get Kodi/SPMC or MrMC.
Yeah, I use Kodi exclusively on my Fire TV Stick. No need for root or anything.
But ...
After I upgraded to Jarvis (16), I noticed it hung on some videos, including ones it played fine before. So I went back to the older Helix version.
If anyone knows what's going on, I'd appreciate it. Is Isengard as good/better/worse than the other versions?
The situation of Kodi on Android is not too great and getting worse.
But apps like KODI are bulky swiss-army knives for media and many users reported issues with some even causing device instability when the app is not in use,what if someone wants a lightweight-but-powerful player for only music with full support for 192Khz?