[Q] [Root] NookManager - graphical rooter for 1.2.0 and beyond - Nook Touch General

Thanks for this great tool. I rooted my NST 1.2.0 US without any issues
except that I can't install some apks
e.g. Sony Reader, gmail.apk, GooglePlayBooks, calculator.apk all fail.
from the SD card I get a "parse error" and via ADB (Android Commander)
I get the errors listed below.
Starting operation...
[1/1] Installing app: com.sony.drbd.mobile.reader-1.apk
pkg: /data/local/tmp/com.sony.drbd.mobile.reader-1.apk
Failure [INSTALL_PARSE_FAILED_UNEXPECTED_EXCEPTION]
379 KB/s (4697279 bytes in 12.071s)
*** Operation complete! ***
Starting operation...
[1/1] Installing app: Calculator.apk
pkg: /data/local/tmp/Calculator.apk
Failure [INSTALL_FAILED_OLDER_SDK]
167 KB/s (70039 bytes in 0.408s)
*** Operation complete! ***
Starting operation...
[1/1] Installing app: GooglePlayBooks_v2.5.92.apk
pkg: /data/local/tmp/GooglePlayBooks_v2.5.92.apk
Failure [INSTALL_FAILED_OLDER_SDK]
402 KB/s (5927819 bytes in 14.388s)
*** Operation complete! ***

I'm not sure about the first error, but I suspect the second two (INSTALL_FAILED_OLDER_SDK) means that the app wants a version of Android newer than 2.1.
Jeff

repoocaj said:
I'm not sure about the first error, but I suspect the second two (INSTALL_FAILED_OLDER_SDK) means that the app wants a version of Android newer than 2.1.
Jeff
Click to expand...
Click to collapse
Seems that most app installs fail. Is it Android 2.1 os or the new 1.2.0 firmware? From what I read on the net prior to rooting
I was expecting to load at lease all the major ereader stores.

dcitelecom said:
Seems that most app installs fail. Is it Android 2.1 os or the new 1.2.0 firmware? From what I read on the net prior to rooting
I was expecting to load at lease all the major ereader stores.
Click to expand...
Click to collapse
I'm running the 1.2.0 firmware. If you want to upload the apps somewhere (assuming that they're the free versions), I'll try loading them on mine with adb and see what happens.
Jeff

dcitelecom said:
Thanks for this great tool. I rooted my NST 1.2.0 US without any issues
except that I can't install some apks
e.g. Sony Reader, gmail.apk, GooglePlayBooks, calculator.apk all fail.
Click to expand...
Click to collapse
On the NookManager development thread someone said they loaded the Google Apps from CM5. More info on that thread starting at post 42.

geckoday said:
On the NookManager development thread someone said they loaded the Google Apps from CM5. More info on that thread starting at post 42.
Click to expand...
Click to collapse
All the links to the zipfile are dead. I'll try to go find the orginal later tonight and see what happens.
Jeff

repoocaj said:
All the links to the zipfile are dead. I'll try to go find the orginal later tonight and see what happens.
Jeff
Click to expand...
Click to collapse
Best to get it straight from CyanogenMod. Their list of Gapps packages is at http://wiki.rootzwiki.com/Google_Apps I believe you want the Eclair (Android 2.1) MDPI version. Its a zip file for CWM but you'll probably want to unzip and pick out the apk's you want.

repoocaj said:
I'm running the 1.2.0 firmware. If you want to upload the apps somewhere (assuming that they're the free versions), I'll try loading them on mine with adb and see what happens.
Jeff
Click to expand...
Click to collapse
Actually almost all app installs fail. Even on the Amazon app store included with the graphical rooter. E.g. Protector, Go launcher, etc...

dcitelecom said:
Actually almost all app installs fail. Even on the Amazon app store included with the graphical rooter. E.g. Protector, Go launcher, etc...
Click to expand...
Click to collapse
Its a matter of finding the things that work - this is a hacked device that was never intended to run everything. Go Launcher installs fine for me from the Amazon app store IF I have an sd card inserted - no sd card install fails. I've found the same with some other apps or some install but don't run properly without an sd card. To get some other apps working its digging around to find an older version that works as many apps no longer support the Android 2.1 on our NST's.

geckoday said:
Its a matter of finding the things that work - this is a hacked device that was never intended to run everything. Go Launcher installs fine for me from the Amazon app store IF I have an sd card inserted - no sd card install fails. I've found the same with some other apps or some install but don't run properly without an sd card. To get some other apps working its digging around to find an older version that works as many apps no longer support the Android 2.1 on our NST's.
Click to expand...
Click to collapse
If Android 2.1 sucks so badly how come we don't have a CM7 custom rom for the NST?

dcitelecom said:
If Android 2.1 sucks so badly how come we don't have a CM7 custom rom for the NST?
Click to expand...
Click to collapse
My guess would be that it's such a niche market - people that want to use a slow-display, grayscale only tablet - that no one has bothered to try.

NevynPA said:
My guess would be that it's such a niche market - people that want to use a slow-display, grayscale only tablet - that no one has bothered to try.
Click to expand...
Click to collapse
OK but a rooted nook with Android 2.1 is almost useless. I can't install Google play books, Market or Sony reader so my goal of having a multi store eInk reader failed. On the Sony reader I have nook, kindle, sony, google and kobo readers installed and would love to do the same on my nook.

dcitelecom said:
OK but a rooted nook with Android 2.1 is almost useless. I can't install Google play books, Market or Sony reader so my goal of having a multi store eInk reader failed. On the Sony reader I have nook, kindle, sony, google and kobo readers installed and would love to do the same on my nook.
Click to expand...
Click to collapse
Yes, 2.1 is a pain as Google is recommending developers target 2.2 & up and many are dropping 2.1 support. Send your thanks to B&N. Someone started a thread on porting CM7 but it appears dead as its a huge effort for niche device. So we have to live with a somewhat limited selection of apps but with some digging you can usually find a version of what you are looking for that works. goodereader.com has a lot of older versions of apps (download apk's & sideload) that will sometimes work when the newer versions won't. For what you have on your Sony reader you can try these on your Nook:
Nook - built in reader, nothing to load
Kindle - see this post for a version that works
Sony - try this version from goodereader.com
Google - probably the one that won't work but dig around - I bet eventually we'll see it working
Kobo - available on the Amazon app store
And you can load Aldiko and set it up to check out books from the library too.
Not so useless IMO.

dcitelecom said:
OK but a rooted nook with Android 2.1 is almost useless. I can't install Google play books, Market or Sony reader so my goal of having a multi store eInk reader failed. On the Sony reader I have nook, kindle, sony, google and kobo readers installed and would love to do the same on my nook.
Click to expand...
Click to collapse
1. Google play books
try this
http://forum.xda-developers.com/showthread.php?t=1732611&highlight=google+books
2. Market
Currently you can do this only FW 1.1/1.1.2
..but you can

Related

[Q] [7.1 n198] [Nook App] Unable to download Nook App 2.7.2 to CM7.1/n198

I recently installed CM7.1/n198 on an SD card (Sandisc 16G class 2) and have been happy wih everything except one thing.
I am unable to download the Nook App (2.7.2) from the market, which claims I am not installing from a compatible device.
Since this is a clean install (gapps -gb-20110613-signed), I dont believe there is a way to revert my Google Market back to the 'old version'.
How can I get Nook to run on my Nook? It seems counterintutive.
You could try clearing market app data. Settings->Aplications->Market->clear data.
If that doesn't work you'll need to probably change your dpi, theres a couple tutorials around the forum on how to get the market working, most of them just work for some time. Since the market isn't a 100% working with the NC you'll need to do the clear data steps from time to time.
byronczimmer said:
I recently installed CM7.1/n198 on an SD card (Sandisc 16G class 2) and have been happy wih everything except one thing.
I am unable to download the Nook App (2.7.2) from the market, which claims I am not installing from a compatible device.
Since this is a clean install (gapps -gb-20110613-signed), I dont believe there is a way to revert my Google Market back to the 'old version'.
How can I get Nook to run on my Nook? It seems counterintutive.
Click to expand...
Click to collapse
You still got a market update... you can revert to the older market as described by freezing/renaming/deleting marketupdater.apk and going into manage apps and uninstalling updates.
byronczimmer said:
I recently installed CM7.1/n198 on an SD card (Sandisc 16G class 2) and have been happy wih everything except one thing.
I am unable to download the Nook App (2.7.2) from the market, which claims I am not installing from a compatible device.
Since this is a clean install (gapps -gb-20110613-signed), I dont believe there is a way to revert my Google Market back to the 'old version'.
How can I get Nook to run on my Nook? It seems counterintutive.
Click to expand...
Click to collapse
As far as I am aware, the google apps package people are including with the nightly updates is still the old market. Yours may have later updated on its own...
Indeed Market DID update on its own, so reverting (a few times actually) did the trick eventually.
Do we know why the market claims the nook color cannot run the B&N Nook app?
byronczimmer said:
Indeed Market DID update on its own, so reverting (a few times actually) did the trick eventually.
Do we know why the market claims the nook color cannot run the B&N Nook app?
Click to expand...
Click to collapse
Long story. Just stick with the old market or move up to nightly 200 where the LCD density was resent to 160.

[Q] Can't Install New Kindle Version (3.4.0)

Has anyone been able to install the new version of Kindle (3.4.0) for Android on a rooted Nook Touch? It's supposed to work for Android 2.1+, but the update doesn't show up in the Market for me, and if I uninstall Kindle entirely, and then re-download and reinstall it, I get version 3.2.0 again. If I try to sideload the apk, I get a Parse Error.
I'd really love to get the updated app installed, because it shows the page numbers from the original book, which would be useful leading my students through a textbook.
OK, then, let me ask a different question: has anyone successfully installed the new Kindle for Android version, or am I the only one with a problem?
Seriously, has no one else tried to install the new version of Kindle for Android? You can tell what version you have by looking at the app in Titanium Backup. It's a serious bummer that I bought this Nook because I could easily read both Nook and Kindle e-books, and less than two months later the thing won't install the latest version of Kindle.
MTKnife said:
Has anyone been able to install the new version of Kindle (3.4.0) for Android on a rooted Nook Touch? It's supposed to work for Android 2.1+, but the update doesn't show up in the Market for me, and if I uninstall Kindle entirely, and then re-download and reinstall it, I get version 3.2.0 again. If I try to sideload the apk, I get a Parse Error.
I'd really love to get the updated app installed, because it shows the page numbers from the original book, which would be useful leading my students through a textbook.
Click to expand...
Click to collapse
3.2.0 is the version from market and works on all nook touch. 3.4 is from Amazon appstore and is DRM protected. The apk will only installed on a Nook touch signed in with the orignal amazon account.
fpga_guy said:
3.2.0 is the version from market and works on all nook touch. 3.4 is from Amazon appstore and is DRM protected. The apk will only installed on a Nook touch signed in with the orignal amazon account.
Click to expand...
Click to collapse
No, 3.4.0 is also in the Android Market--I know that because 1) the new version was announced on Android Central (and a lot of other places), 2) the version number is listed in the Android Market description, and 3) I successfully downloaded it, from the Market, onto my phone, and verified the version number in Titanium Backup. I also just verified, on my phone, that page numbers work (though you have to tap the bottom of the screen or select "Go to" to see them).
Good idea to try the Amazon Appstore version--but unfortunately, Kindle for Android doesn't even show up in the Appstore for my Nook. That does lead to another question, though: has anyone successfully downloaded and installed Kindle 3.4.0 from the Amazon Appstore?
Actually, I just tried another tactic, and transferred the 3.4.0 Titanium Backup files to the Nook. I first tried restoring 3.4.0 over the top of 3.2.0--this appeared to be successful, but when I opened the app it was still 3.2.0. I then uninstalled 3.2.0 and tried the restore of 3.4.0 again, and it simply hangs: it's apparently, for some reason, not compatible with the Nook Touch. I wonder if there's some way that could be fixed?
Here's the link to the Amazon Appstore APK, courtesy of Amazon itself!
Googie2149 said:
Here's the link to the Amazon Appstore APK, courtesy of Amazon itself!
Click to expand...
Click to collapse
Thanks. I have the Amazon Appstore installed--that's not the problem. The problem is Kindle for Android, which doesn't show up in the Amazon Appstore (and I have copies of the APK of Kindle for Android). I am able to find and install other apps from the Appstore, though for some apps I get a Parse Error when I try to.
MTKnife said:
Thanks. I have the Amazon Appstore installed--that's not the problem. The problem is Kindle for Android, which doesn't show up in the Amazon Appstore (and I have copies of the APK of Kindle for Android). I am able to find and install other apps from the Appstore, though for some apps I get a Parse Error when I try to.
Click to expand...
Click to collapse
I have BN 1.1.0 for the Touch. Kindle 3.2 shows up when I go to Market - not Android Central but the google market. Kindle 3.4 shows up when I go to Amazon Appstore. My understanding is that for Market, only apks that install shows up.
What version of Touch are you on and how did you root the Touch?
I'm using SalsichaNooter, though I tried to install the APK under MinimalTouch (which is I what I rooted with this time, after doing a factory restore). It is definitely not the case that all apps that show up in the Appstore can be installed: for example, Application Folder Pro is one I've purchased (for my phone) and that shows up on the Nook, but I get a "Parse Error" when I try to install it.
And yes, you're right that it says 3.2 in the Android Market, under the actual version number; I was looking instead at the changelog, which says 3.4. However, that's only for the Nook: for my Evo 3D, the version that shows up in the Android Market is 3.4.
Before I go putting another ROM on this thing, have you actually been able to install version 3.4.0 of Kindle for Android from the Amazon Appstore, and if so, what ROM are you using?
If I install the Kindle app from the Android Market on my NST running B&N 1.1.0, I get v3.2.0.35. If I install it on my NC running B&N 1.4.1, I get 3.4.0.156.
The NST is only running 2.1 Eclair, while the NC is running 2.2 Froyo. On the Kindle Market page, it says the current version "varies with device", so I suspect that's the underlying issue
The rooters don't change the actual ROM you're running. Not sure what you mean by another ROM.
Chances are it's not running properly because it needs Froyo or higher, meaning that the NST is just not compatible no matter what you try.
bobstro said:
If I install the Kindle app from the Android Market on my NST running B&N 1.1.0, I get v3.2.0.35. If I install it on my NC running B&N 1.4.1, I get 3.4.0.156.
The NST is only running 2.1 Eclair, while the NC is running 2.2 Froyo. On the Kindle Market page, it says the current version "varies with device", so I suspect that's the underlying issue
The rooters don't change the actual ROM you're running. Not sure what you mean by another ROM.
Click to expand...
Click to collapse
All of the custom ROM's available for the Nook Touch are the same version of Android, 2.1 (Eclair), but there are several different ROM's available (four that I know of): in the usual Android parlance, if the firmware is modified at all (even though it's based on the original firmware), it's called a new ROM. When you root your Nook, you're not merely rooting it, but actually changing some of the stuff in the original ROM, including, for example, the framework files--if you look inside the MinimalTouch package, for example (since that one comes as a ZIP file, it's easy to look at), you'll see all the files that are changed.
However, as a later poster noted, the problem seems to be that Kindle 3.4 runs only on Android 2.2+, rather than Android 2.1+; Amazon doesn't appear to have bothered to document this, and that's the source of my confusion.
Safe to say, then, "putting another ROM on" won't fix this problem. You'll still be running 2.1 Eclair, no matter which rooter you try. I think you're stuck with the older Kindle version on this device, at least for now. I'm not aware of any ongoing efforts to put Froyo on this device.
MTKnife said:
All of the custom ROM's available for the Nook Touch are the same version of Android, 2.1 (Eclair), but there are several different ROM's available (four that I know of): in the usual Android parlance, if the firmware is modified at all (even though it's based on the original firmware), it's called a new ROM. When you root your Nook, you're not merely rooting it, but actually changing some of the stuff in the original ROM, including, for example, the framework files--if you look inside the MinimalTouch package, for example (since that one comes as a ZIP file, it's easy to look at), you'll see all the files that are changed.
However, as a later poster noted, the problem seems to be that Kindle 3.4 runs only on Android 2.2+, rather than Android 2.1+; Amazon doesn't appear to have bothered to document this, and that's the source of my confusion.
Click to expand...
Click to collapse
They're not different ROMS. They just aren't. All you're doing is rooting the device, not replacing the ROM.
I rooted my Nook a while back (still even on the 1.0.0 firmware), but only now started looking into updating it. I saw the update for the Kindle on my Sensation versus the NST, but I'm not sure I see a compelling reason to try to force the update (though a real page numbers would be nice).
Is the hardware even capable of running Froyo? Maybe it's just the e-ink screen, but it seems slow enough just with Eclair.
hardware is capable of running froyo but there is no froyo rom for NST. :-D
It's already been stated, but to summarize:
The new Kindle app needs Android 2.2 and above, the NST is only at 2.1.
There are no roms for this device at the moment, and probably never.
See attached older version that I just installed on a Simple Touch no problem.
3.2.0.35 shows up in the Market on my rooted NST. It's just the newer version that doesn't.
Newspapers
I have recently discovered that reading newspapers/magazines is only really possible with the older versions (Kindle-2.0.5.103970165.apk : http://www.freewarelovers.com/android/app/kindle) because the overview page of a multistory object on the newer versions 3+ does not accept gestures (swipe up and down are ignored or interpreted as clicks) so it is impossible to scroll. The gestures work fine in every other part of the program just not in the overview. The only apparent downside of version 2 is that there is no dictionary which I sometimes miss.

[Q] NEW Nook Color rootable? article...

hey, I am new to the tablet world, I tried to search for this and look in the recent post and didnt really find the answer I was looking for....
So if I buy a new or refurbished Nook Color right now from B&N... will I be able to root it?!
this article is old... so I am not sure if this is the case?
any advice Please
WARNING - READ THIS FIRST: Barnes and Noble has introduced a new hardware revision which bricks your unit if you install their official 1.0.0 Firmware (A step needed to root). As of right now, Nooks with serial #s starting with 1003 (running firmware 1.5) cannot be rooted, and should NOT be attempted. See nookdevs New_Hardware_Revision for more details before you think of trying this!
Click to expand...
Click to collapse
from:
nooktalk.net/news/time-to-hack-root-your-nook
THANKS!
cant post the regular link yet
Just buy from eBay or Craigslist you'll find it cheaper n rootable
Sent from my NookColor using XDA Premium App
Well, where is the difference if I buy it new from eBay?! How is it more or less rootable...? If it is new it is new No matter where it comes from or?!
and 135$ for refurbished didn't seem bad... Or?!
Sent from my PC36100 using XDA App
First.... those may be Nooks and NOT Nook Colors... The newest firmware for Nook Color or Nook Tablets is 1.4.1 and you reference FW ver 1.5.
Also, I don't know of any NC's or NT's with serial numbers below 2000 first 4 digits.
Additionally, with the newer rooting tools available, you don't need to install anything prior to 1.4.1 to root them.
alexwick said:
[...] From:
nooktalk.net/news/time-to-hack-root-your-nook
Click to expand...
Click to collapse
At the very top of that article, it states:
Last Updated on Wednesday, 29 December 2010 12:54​
You might find reading more recent articles a bit more revealing. A few things have happened since 2010.
I am aware the article is old... So short answer...
A new bought nook can be rooted?!?
Sent from my PC36100 using XDA App
Short answer, yes.
My base FW is 1.0.0. I'm running the 20120217 build of Mirage-Kang from eMMC.
I can't imagine how it could get much more rooted than this unless it would be to follow the directions to root it to the letter but if I did that then I wouldn't be much of an Asshole and I am a journeyman Asshole so there you have it.
Oh, and I don't feel terribly compelled to take it out of the case to look at the serial.
MISRy said:
Short answer, yes.
My base FW is 1.0.0. I'm running the 20120217 build of Mirage-Kang from eMMC.
I can't imagine how it could get much more rooted than this unless it would be to follow the directions to root it to the letter but if I did that then I wouldn't be much of an Asshole and I am a journeyman Asshole so there you have it.
Oh, and I don't feel terribly compelled to take it out of the case to look at the serial.
Click to expand...
Click to collapse
But do you have a Nook... or a Nook Color?
I mean yeah the Nook is rootable... but I didn't know a Mirage Kang was done for it.
Just ordered a refurbished nook color for 135$ hope will get it rooted fine... Which is the best thread for noobs here to get it rooted?!
Sent from my PC36100 using XDA App
alexwick said:
Just ordered a refurbished nook color for 135$ hope will get it rooted fine...
Click to expand...
Click to collapse
Since there is a manual nooter for the 1.4, there's no problem rooting it.
Which is the best thread for noobs here to get it rooted?!
Click to expand...
Click to collapse
Which rooting do you wish to do? If you want to run the stock B&N apps side by side with apps downloaded from the B&N market, then first register the refurbished system with B&N, then go to NC developer forum and look in "[NC][1.4.1] ManualNooter 5.02.19". That's a couple of minor version steps past the one I used, but it looked like its got it all pulled together from the three different sources of info I used last month.
I wanted to keep Nook Comics support in the stock ereader, so I opted for the manual nooter.
If you want to do a CM7/CM9/MIUI root, which installs alternate firmware for the system instead of modifying the existing firmware to allow Android market apps ... well then, I dunno, as after experimenting with a CM7 sd sidecard, I opted for the manual nooter approach. I'd look in the developer forum for the most recent thread with detailed install instructions for the firmware I wanted to install.
Pretty off topic, but this helped me when I needed to exchange a nook color that I had lost the box for. If you need your serial number, it is inside the flap that covers the micro SD slot.
There are other ways to find it, but if you are on the phone with support and a rooted nook, this is a useful thing.
I also just bought a refurb Nook Color. It is running 1.3.0 out of the box. I want to root it then install CM7. However I can't find any clear posts on how to. Either they are all for earlier FW or 1.4. Should I update to 1.4 before Nootering? If so which MNooter should I use? Or is it recommended to just Nooter 1.3? Again which Mnooter should I use for 1.3?
Thanks
BruceMcF said:
Since there is a manual nooter for the 1.4, there's no problem rooting it.
Which rooting do you wish to do? If you want to run the stock B&N apps side by side with apps downloaded from the B&N market, then first register the refurbished system with B&N, then go to NC developer forum and look in "[NC][1.4.1] ManualNooter 5.02.19". That's a couple of minor version steps past the one I used, but it looked like its got it all pulled together from the three different sources of info I used last month.
I wanted to keep Nook Comics support in the stock ereader, so I opted for the manual nooter.
If you want to do a CM7/CM9/MIUI root, which installs alternate firmware for the system instead of modifying the existing firmware to allow Android market apps ... well then, I dunno, as after experimenting with a CM7 sd sidecard, I opted for the manual nooter approach. I'd look in the developer forum for the most recent thread with detailed install instructions for the firmware I wanted to install.
Click to expand...
Click to collapse
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Optimus V Prime said:
I also just bought a refurb Nook Color. It is running 1.3.0 out of the box. I want to root it then install CM7. However I can't find any clear posts on how to. Either they are all for earlier FW or 1.4. Should I update to 1.4 before Nootering? If so which MNooter should I use? Or is it recommended to just Nooter 1.3? Again which Mnooter should I use for 1.3?
Click to expand...
Click to collapse
You do not need to root the B&N firmware before loading CM7. You do need to decide whether you want to run CM7 on internal eMMC or external SD. If you plan to install CM7 to eMMC, you will over-write the B&N firmware, so rooting it is pointless. Once you've decided that, we can point you in the right direction.
There are also guides here on rooting B&N firmware that you can locate with a bit of searching.
---------- Post added at 03:18 PM ---------- Previous post was at 03:14 PM ----------
alexwick said:
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Click to expand...
Click to collapse
Yes, you can.
alexwick said:
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Click to expand...
Click to collapse
Yes, as I said, that's the setup I was using when I decided I prefer a manual nooter. Among your choices, you can:
(1) Replace the stock firmware with an alternative, such as CM7
(2) Run CM7 off a booting SD card and run stock B&N from internal memory
(3) Root the stock B&N system and then load and run Android market apps alongside the B&N built-in and B&N store apps.
I wanted to keep the features of the 1.4.1 ereader, including Nook Comics support, so for me (1) was out, and I only needed a few apps from the Android Store, so I finally settled on (3) to avoid having to boot back and forth between the two systems. But first I did (2) to try things out and get an idea of whether I wanted to root the B&N firmware or replace it with something like CM7.
Can I not install cm7 on the SD and the regular b&n system when boot from internal memory?!
Yes, as I said, that's the setup I was using when I decided I prefer a manual nooter. Among your choices, you can:
(1) Replace the stock firmware with an alternative, such as CM7
(2) Run CM7 off a booting SD card and run stock B&N from internal memory
(3) Root the stock B&N system and then load and run Android market apps alongside the B&N built-in and B&N store apps.
I wanted to keep the features of the 1.4.1 ereader, including Nook Comics support, so for me (1) was out, and I only needed a few apps from the Android Store, so I finally settled on (3) to avoid having to boot back and forth between the two systems. But first I did (2) to try things out and get an idea of whether I wanted to root the B&N firmware or replace it with something like CM7.
Click to expand...
Click to collapse
It think I wanna go for option 2&3, can I not root the B&N internal system and also run CM 7 from SD card?
Do I have to take the SD card in and out depending in which one i wanna boot!?
Also another question... The whole reason this rooting is done if I understand correctly is to have access to all the systems in the NC, where do I get the Apps from ? Do I still have to get them through the market? Or can I download them somewhere!?
Got a question... Git my nook today, and it seems to be lagging quite a bit sometimes... Is that normal? Sometimes tottaly unresponsive... Is this normal?!
Sent from my PC36100 using XDA App
alexwick said:
It think I wanna go for option 2&3, can I not root the B&N internal system and also run CM 7 from SD card?
Do I have to take the SD card in and out depending in which one i wanna boot!?
Click to expand...
Click to collapse
Taking the SD card in and out depending on which one I wanted to boot, then full power off and power on was the way I did it. Don't know if there's a better way, but never saw a better way mentioned.
You can indeed run CM7 from an SD card and root the B&N internal system. That would allow you to use Nook Tweaks in the CM7 side to, for example, run a keyboard off the USB port and overclock the chip ~ neither of which you can do with the stock kernel ~ and still have the use of the 1.4.1 ereader for Nook Comics or media-enhanced ebooks.
Get a main microSD card for the CM7 SD card install. Follow the CM7 SD card instructions to do the CM7 SD card install on the big card.
And then get another microSD card (2GB Class 4 is plenty) and follow the 1.4.1 manual nooter instructions to root the stock B&N kernel.
Also another question... The whole reason this rooting is done if I understand correctly is to have access to all the systems in the NC, where do I get the Apps from ? Do I still have to get them through the market? Or can I download them somewhere!?
Click to expand...
Click to collapse
If you follow the CM7 SD card install directions, you will have access to the full Android Market on that install. Same thing if you follow the 1.4.1 manual nooter instructions ~ you will have access to the Android Market via the Nook Color Application Manager, and if you want can put the Android Market on the B&N Home Screen.
Its best to have a gmail.com account already, for the Android market registration, so sign up for one of those before starting the process if you don't already have one. And from the Android Market, you can also install the other markets (Amazon, 1mobile, GetJar) if you prefer one of those.
alexwick said:
Got a question... Git my nook today, and it seems to be lagging quite a bit sometimes... Is that normal? Sometimes tottaly unresponsive... Is this normal?!
Click to expand...
Click to collapse
It can be laggy, especially if you have too much load on it. Sometimes I'm surprised at how many windows I have open in the stock browser. Turning it all the way off will shut down apps that you may have left unclosed, free up RAM, and its normally back to its normal self.
Mind, the gurus have Android apps that can be used to shut down individual apps, but the brute force approach seems to work for me.
thanks for the quick detailed reply...
for the LAGS, well I dont have hardly anything open... the only thing i installed and bought was from the market. Angry Birds... and it seems sometime it will not respond to the throwing of the bird, but just scale the screen... even to exit the game and after the game is closed it seems to not respond properly... having to tap a button 5 times until it responds... and than it works fine after a reboot... and than a couple hours later same thing in the game... ..
also it seems like internetpages like nick.com seem to load forever and are very laggy. I ahve a 10 MBIT Internet connectio over wifi, so that shouldnt be a problem....
To teh dual Systems...Do I also need a second 2GB card for the rooted internal stock system, or is that just for the installation of it!?
I actually do have a 16 GB and a 2 GB at home already...
"If you follow the CM7 SD card install directions, you will have access to the full Android Market on that install. Same thing if you follow the 1.4.1 manual nooter instructions ~ you will have access to the Android Market via the Nook Color Application Manager, and if you want can put the Android Market on the B&N Home Screen."
Click to expand...
Click to collapse
Well on my android phone... most of the apps are available I believe for free on the forums... is this similar here... or do I have to buy them!? BTW My phone is not rooted...
The System is some 1.3 version I received... will I need to update to 1.4 first!?
I also do already have a gmail account... its a german one though [email protected] but that should be fine ... It is the german GMAIL
Also linked the nook to th BN Store I believe...Is tehre any waay to check?!
Should I not be able to stream netflix... with the regular nook!?
ONCE AGAIN THANKS FOR YOUR TIME !!!!
alexwick said:
... also it seems like internetpages like nick.com seem to load forever and are very laggy. I ahve a 10 MBIT Internet connectio over wifi, so that shouldnt be a problem....
Click to expand...
Click to collapse
That's just the stock Android Browser and an 800MHz single core system with 512Mb RAM plowing through a site with all the bells and whistles and targetted at a PC. Try the Dolphin HD browser (its in the B&N store, and its free so no worry about having to re-download it from the Android market to your CM7 install) ... it has an option to hold off flash content until you actually want to run it that can really speed up some sites.
To teh dual Systems...Do I also need a second 2GB card for the rooted internal stock system, or is that just for the installation of it!?
I actually do have a 16 GB and a 2 GB at home already...
Click to expand...
Click to collapse
Installation ... you want a good sized card for the CM7 install, and reading and storing an image from a large card, then formatting it and writing the install card image, then saving the install card image, formatting, and restoring the CM7 install image is a royal pain.
Note that you probably want to keep the install card as a bootable recovery card. 1GB is enough to do the manual noot, but 2GB is enough to hold the recovery of the original stock B&N before you do the manual root. 4GB is even better, as it can hold a recovery of the stock B&N as well as a recovery of the system right after it is manually nooted, in case you do something later to get it messed up.
And you can get a 4GB Class 4 card for $5 with free shipping from Amazon ~ the new 32GB flash cards have pushed the price of the smaller ones way down ~ so to my mind that's worth it to be able to set aside a recovery card.
Well on my android phone... most of the apps are available I believe for free on the forums... is this similar here... or do I have to buy them!? BTW My phone is not rooted...
Click to expand...
Click to collapse
Yes. There are paid apps, but both the CM7 install or the manual nooter give full access to a wide range of free apps on the main Android Market, and allow you to install 1mobile, GetJar, or Amazon if you prefer any of those markets.
The System is some 1.3 version I received... will I need to update to 1.4 first!?
Click to expand...
Click to collapse
Not for the SD card install of CM7. Be sure to follow the instructions for making an SD card install on a 1.3 system.
You'll want to upgrade for a rooted stock B&N Kernel to 1.4.2, because its only 1.4 that has the updated ereader, Nook Color tailored Netflix app, likely B&N Store HuluPlus this Friday ... if you were replacing the stock Kernel, there's be no reason to update, and the installs for the 1.3 system are more mature ... but if you want to keep the B&N Kernel, upgrade to 1.4.2. before you lock it down from further OTA updates.
I also do already have a gmail account... its a german one though [email protected] but that should be fine ... It is the german GMAIL
Click to expand...
Click to collapse
I'd don't know from personal experience, but I've seen some warnings about it being best to have a gmail.com account. Just to be safe, I'd sign up for a gmail.com account and give your primary gmail account as the email account used to confirm that you are a real person. Save it in an "Accounts" folder in your main gmail if you are unlikely to use it for anything except the Android market.
Also linked the nook to th BN Store I believe...Is tehre any waay to check?!
Should I not be able to stream netflix... with the regular nook!?
ONCE AGAIN THANKS FOR YOUR TIME !!!!
Click to expand...
Click to collapse
Before you start working on the unit, go to the store (its on the navbar) search for apps and download a free app. Dolphin HD is a good one. If it downloads and installs, you are linked to the B&N store.

[Q] Just got My nook ST shipped to my home... :)

got my nook yesterday, registered,and ready to go...
the e-ink is really good on my eyes and i'm lovin it...
now to what i'm here for..
as everyone i want to hack my nst for a better e reading experience, a li'l browsing, a few gud themes and a few games.
i want some help in doing it. i could have gone through the forums but there being many, it really is a bit hard to choose the right one and in right order. i would like anyone of you to share the links in order of it supposed to be done, i.e. backing up my default files and then to hacking etc. a video tutorial link would be more appreciated. As i have some of my books scanned, suggest a reader to read scanned pdfs after hacking...
and of course i'm not a regular hacker,except that i have hacked my psp once so no problem getting along with the instructions...
Expecting a few gud responses, thanQ
harunaku
TouchNooterwill take care of the rooting. Do a backup before you do anything else.
bobstro said:
TouchNooterwill take care of the rooting. Do a backup before you do anything else.
Click to expand...
Click to collapse
k,thanks a lot. I rooted my nook successfully
Now to make backup of my factory files, I tried the thread http://forum.xda-developers.com/showthread.php?t=1142983 which guides me to backup my files. but the noogie.img link does not have any download in that thread. what really is noogie and please give me an alternate link to noogie.img.
thanks
harunaku
You need to follow the redirect link on NookDevs. The page has been moved. noogie.img is available from that page.
thanks again, i'm done with backing up too.
now, i couldn't find a way to install the first app in the nook memory. of course u can use file manager, but there's no file manager preinstalled, is there? how to get to that apk file?
harunaku said:
thanks again, i'm done with backing up too.
now, i couldn't find a way to install the first app in the nook memory. of course u can use file manager, but there's no file manager preinstalled, is there? how to get to that apk file?
Click to expand...
Click to collapse
Wait... are you trying to do the manual rooting process? There are automated rooters. Noogie is used to backup and root manually (if you want to).
harunaku said:
[...] now, i couldn't find a way to install the first app in the nook memory. of course u can use file manager, but there's no file manager preinstalled, is there? how to get to that apk file?
Click to expand...
Click to collapse
Assuming you used the latest TouchNooter, Super Manager should work. I think SM is new from the version of TN that I last used.
Or, once Market is working, download your favorite.
bobstro said:
Assuming you used the latest TouchNooter, Super Manager should work. I think SM is new from the version of TN that I last used.
Or, once Market is working, download your favorite.
Click to expand...
Click to collapse
my doubts dont seem to be ending any soon....
-i'm done with everything, even market's working. but i couldn't search in market. when i type in search box and enter - no response...
-i managed to find 'file manager'' in top free app list and installed it. now when i try to install the apks in micro sd card, it says 'for security,ur phone is set to block non android sourced apps',though i checked 'allow non market apps' in nook color tools. suggest me a way to install the apps in card.
-the market shows the apps with $ pricing, how to make it regional?
-sometimes while swiping to scroll, the page goes to the end all the way...
-after rooting the wifi is disconnecting frequently
thanks in advance...
harunaku said:
[...] -i'm done with everything, even market's working. but i couldn't search in market. when i type in search box and enter - no response...
Click to expand...
Click to collapse
That seems to be a problem some people have and others don't. What version of the B&N firmware are you running?
-i managed to find 'file manager'' in top free app list and installed it. now when i try to install the apks in micro sd card, it says 'for security,ur phone is set to block non android sourced apps',though i checked 'allow non market apps' in nook color tools. suggest me a way to install the apps in card.
Click to expand...
Click to collapse
Sounds like you need to allow 3rd party apps. Launch NookColor Tools, then toggle the Allow Non-Market Apps settings off and back on. Then try again.
[...] -the market shows the apps with $ pricing, how to make it regional?
-sometimes while swiping to scroll, the page goes to the end all the way...
Click to expand...
Click to collapse
Those aren't really rooting issues.
-after rooting the wifi is disconnecting frequently
Click to expand...
Click to collapse
This may be related to the B&N firmware version you're running. Apparently, the NST v1.1.0 has known problems with some 802.11n networks, WPA2 settings and various other random wifi issues. I don't believe TN touches wifi, so it shouldn't have changed.
would you say go ahead, if i say i'm gonna restore the factory settings with the backup and root again?
and yes, i rooted with the latest touchnooter (the link u posted)

Cannot install apps on rooted NSTG

iOS have rooted my NSTG using glownooter and all went well in that it boots and everything is there as expected. Unfortunately I can see no way of getting apps on it. I have tried the following
-installing using browser, it crashes
-Opera mini does not work
- installing new browser, none available in market (I'm sure I've found dolphin there previously. )
-Amazon AppStore, does not work
-gmail attached app, cannot download
-email app, crashes
-google drive, box, Dropbox links in gmail, launches browser which crashes
-super manager crashes
I would really appreciate any help, all I really want is the kindle app working as the nook store is no more.
Thanks in hope
Frank
djchem said:
iOS have rooted my NSTG using glownooter and all went well in that it boots and everything is there as expected. Unfortunately I can see no way of getting apps on it. I have tried the following
-installing using browser, it crashes
Click to expand...
Click to collapse
Disable the native Browser.apk (rename Browser.apk.bak)
-Opera mini does not work
Click to expand...
Click to collapse
Not for installing an app. AFAIK, the last working version of Opera Mini is attached below.
- installing new browser, none available in market (I'm sure I've found dolphin there previously. )
Click to expand...
Click to collapse
Better than Opera Mini (IMHO) although more ancient, is the Opera Mobile I've attached below.
-Amazon AppStore, does not work
Click to expand...
Click to collapse
No, that is dead. Either uninstall it or disable the app (as for Browser, above)
-gmail attached app, cannot download
-email app, crashes
-google drive, box, Dropbox links in gmail, launches browser which crashes
-super manager crashes
I would really appreciate any help, all I really want is the kindle app working as the nook store is no more.
Click to expand...
Click to collapse
OK, well, you've tried just about everything that can't/won't work
How about something that will? Copy the apps onto your SD card and locate them with a file manager (nice older version of ES File Explorer attached below). Tap the apk file and it should install. You can do this with the Kindle app as well. Unless you've got GApps working and can access the Market via the SearchMarket app, side-loading like this is your only recourse (well, almost....there's also ADB).
nmyshkin said:
Disable the native Browser.apk (rename Browser.apk.bak)
Not for installing an app. AFAIK, the last working version of Opera Mini is attached below.
Better than Opera Mini (IMHO) although more ancient, is the Opera Mobile I've attached below.
No, that is dead. Either uninstall it or disable the app (as for Browser, above)
OK, well, you've tried just about everything that can't/won't work
How about something that will? Copy the apps onto your SD card and locate them with a file manager (nice older version of ES File Explorer attached below). Tap the apk file and it should install. You can do this with the Kindle app as well. Unless you've got GApps working and can access the Market via the SearchMarket app, side-loading like this is your only recourse (well, almost....there's also ADB).
Click to expand...
Click to collapse
Hi thanks for the comments. I would love to get ES file explorer on the Nook but I have no way of installing any apks so I can't see how I can side load the apps. Previously I have got the first app from the market and gone from there but there does not seem to be any apps I can use to do this. I'm guessing I'll have to investigate ADB.
Thanks again
Frank
djchem said:
Hi thanks for the comments. I would love to get ES file explorer on the Nook but I have no way of installing any apks so I can't see how I can side load the apps. Previously I have got the first app from the market and gone from there but there does not seem to be any apps I can use to do this. I'm guessing I'll have to investigate ADB.
Click to expand...
Click to collapse
So there is a bigger issue. I'm not familiar with glownooter but I did look it up. Whether you used that exact same version or not, it sounds like you have the makings of Market access, not to mention abdwireless. If you can get the Market up and running then you can download any old file manager that will install just to get going, or you can get apps directly from the PlayStore (though the pickings are somewhat limited for Android 2.1
So what's the real issue? Have you tried the GApps sign-in procedure? Did it not work? The glownooter package is supposed to include Market and then you get SearchMarket from the PlayStore once you're signed in. From there, the rest is easy.
If you don't have any apps on your NTG like Market, or YouTube, or GMail, then something is not right about your rooting process.
nmyshkin said:
So there is a bigger issue. I'm not familiar with glownooter but I did look it up. Whether you used that exact same version or not, it sounds like you have the makings of Market access, not to mention abdwireless. If you can get the Market up and running then you can download any old file manager that will install just to get going, or you can get apps directly from the PlayStore (though the pickings are somewhat limited for Android 2.1
So what's the real issue? Have you tried the GApps sign-in procedure? Did it not work? The glownooter package is supposed to include Market and then you get SearchMarket from the PlayStore once you're signed in. From there, the rest is easy.
If you don't have any apps on your NTG like Market, or YouTube, or GMail, then something is not right about your rooting process.
Click to expand...
Click to collapse
Ok, patience appeared to be the key. I checked after a couple of days and the ntg had appeared as a device on the play store which it wasn't originally. I now have a file explorer and Amazon. Unfortunately Amazon won't download any books but one thing at a time. Thanks for the help, Frank.
djchem said:
Ok, patience appeared to be the key. I checked after a couple of days and the ntg had appeared as a device on the play store which it wasn't originally. I now have a file explorer and Amazon. Unfortunately Amazon won't download any books but one thing at a time. Thanks for the help, Frank.
Click to expand...
Click to collapse
Good! Yes, the PlayStore dance takes time for whatever reason.
If by "Amazon" you mean Kindle, then you will need to update your certificates in order to interface with the books you have stored with Amazon. See here for more info.
nmyshkin said:
Good! Yes, the PlayStore dance takes time for whatever reason.
If by "Amazon" you mean Kindle, then you will need to update your certificates in order to interface with the books you have stored with Amazon. See here for more info.
Click to expand...
Click to collapse
Yeah, got it sorted! Thanks for the help, updated the caverns.bks file and all is good!
Thanks again
Frank
How to rename-to-"remove" apps.
nmyshkin said:
Disable the native Browser.apk (rename Browser.apk.bak)
Click to expand...
Click to collapse
Hi, I'm a very new user here. How do I rename this like you suggest? I've tried doing it through the adb shell (via ADB Konnect utility) and it complained about being read-only (yes, I am root and even su'ed to be sure)
# mv Browser.apk Browser.apk.bak
failed on 'Browser.apk' - Read-only file system
Then, I installed ES File Explorer (v3.1.0.1) and tried doing it through that interface, where it complained simply "Task failed". Then, I thought "wait...I should make sure I have root permissions given to this app", found the setting, got root, tried again and got a message indicating success! Except...the file didn't actually get renamed.
I'm out of ideas and time for now. Help is greatly appreciated!
bjswift said:
Hi, I'm a very new user here. How do I rename this like you suggest? I've tried doing it through the adb shell (via ADB Konnect utility) and it complained about being read-only (yes, I am root and even su'ed to be sure)
# mv Browser.apk Browser.apk.bak
failed on 'Browser.apk' - Read-only file system
Then, I installed ES File Explorer (v3.1.0.1) and tried doing it through that interface, where it complained simply "Task failed". Then, I thought "wait...I should make sure I have root permissions given to this app", found the setting, got root, tried again and got a message indicating success! Except...the file didn't actually get renamed.
I'm out of ideas and time for now. Help is greatly appreciated!
Click to expand...
Click to collapse
I have not used adb to rename, but I have used both Root Browser and ES File Explorer to rename apk files (never know when you might want it back....) without any problem. It should not be necessary to change the permissions on the system/app or data/app folders--or the apk files themselves. The file explorers do require root access, but it sounds like you have that covered.
I am a little distrustful of the newer ES File Explorers, as they are mucho bloated and troublesome to use on the NST/NTG sometimes. Maybe try the one attached to this post? It's what I finally settled on (but you have to go to SearchMarket first and mark ES FE as "do not autoupdate" or the older version will just be wiped out).
nmyshkin said:
Maybe try the one attached to this post? It's what I finally settled on (but you have to go to SearchMarket first and mark ES FE as "do not autoupdate" or the older version will just be wiped out).
Click to expand...
Click to collapse
Thanks. Yeah, I tried that one out earlier, but I couldn't see right away how to browse around in / like I could easily do in a 3.* version of ES FE which I had tried out first. Will play around with it more now...GOT IT! :laugh:
I'm also intent on disabling the Amazon Appstore now, but I can't figure out which apk(s) to rename. Should I just do a regular uninstall then?
While at it, I disabled some of the apps recommended here (http://forum.xda-developers.com/showthread.php?t=1933615) because I saw how damn much the phone utilities were killing my battery life!!
So I can't find the thread where I found this earlier, but here are a ton of older versions of that apk if anyone things that's useful: http[://]es-file-explorer.en.uptodown[dot]com/android/old (sorry, about the [dot] stuff, as a new user I can't post external URLs yet).
bjswift said:
Thanks. Yeah, I tried that one out earlier, but I couldn't see right away how to browse around in / like I could easily do in a 3.* version of ES FE which I had tried out first. Will play around with it more now...GOT IT! :laugh:
I'm also intent on disabling the Amazon Appstore now, but I can't figure out which apk(s) to rename. Should I just do a regular uninstall then?
Click to expand...
Click to collapse
It's something like com.venezia...blah-blah...near the end of the app list in data/apps. Just uninstall it. When it was still working back in the old days it was always giving me trouble with nags of one sort or another. It's just one piece and useless so might as well uninstall.
While at it, I disabled some of the apps recommended here (http://forum.xda-developers.com/showthread.php?t=1933615) because I saw how damn much the phone utilities were killing my battery life!!
Click to expand...
Click to collapse
You might be surprised about some of the "phone stuff" and power consumption. The mechanism for reporting battery use on the NST leaves something to be desired. See my post here. In any case, the actual phone.apk is responsible for android media volume control so if you ever pursue USB Audio, you'll need it. The telephony.apk, not needed.
So I can't find the thread where I found this earlier, but here are a ton of older versions of that apk if anyone things that's useful: http[://]es-file-explorer.en.uptodown[dot]com/android/old (sorry, about the [dot] stuff, as a new user I can't post external URLs yet).
Click to expand...
Click to collapse
Ya, that was from me There are a number of threads with packages/lists/links of older versions/working versions of apps. One of the more recent is here.
nmyshkin said:
It's something like com.venezia...blah-blah...near the end of the app list in data/apps.
Click to expand...
Click to collapse
There it is...ended up being called com.android.venezia.apk. I deleted it from the ES FE interface after failing to be able to do it through adb uninstall on my computer. Still need to figure out how to get write permissions there, apparently.a
nmyshkin said:
In any case, the actual phone.apk is responsible for android media volume control so if you ever pursue USB Audio, you'll need it.
Click to expand...
Click to collapse
Yeah, that sounds fun! I'll get there eventually, I hope.
Thanks for all the info!

Categories

Resources