Related
Hi guys.
After my first flash (with success) I had root and all was all right.
But now, I wanted to try litening ROM 2.0, I have to see, that I am not able to flash my device anymore. I tried with odin with 1- and 3-part firmwares,.. only Kernel,..tried with Heimdall, made factory resets thousand times.... after EVERY reboot my SGS2 is in the SAME state since before.
It is a state like I made a special recovery. Installed Apps (after first flash) were gone after every reboot. Token images, ... left....
What can I do now? There has to be a solution I hope ...!?
humphrey74 said:
Hi guys.
After my first flash (with success) I had root and all was all right.
But now, I wanted to try litening ROM 2.0, I have to see, that I am not able to flash my device anymore. I tried with odin with 1- and 3-part firmwares,.. only Kernel,..tried with Heimdall, made factory resets thousand times.... after EVERY reboot my SGS2 is in the SAME state since before.
It is a state like I made a special recovery. Installed Apps (after first flash) were gone after every reboot. Token images, ... left....
What can I do now? There has to be a solution I hope ...!?
Click to expand...
Click to collapse
Hi,
what do u have on Odin display?
because, if you don't kill ALL Kies processes, it's impossible for Odin to connect to your device. (it was the case for me)
Try to kill it with your Windows task manager.
good luck.
keke7442 said:
Hi,
what do u have on Odin display?
because, if you don't kill ALL Kies processes, it's impossible for Odin to connect to your device. (it was the case for me)
Try to kill it with your Windows task manager.
good luck.
Click to expand...
Click to collapse
I forgot to say that here in detail
Odin said PASS (in green) and before klicking start, the correct connection was signed with the yellow COM field.
There is no KIES problem, I killed all KIES processes in TaskManager before.
I discussed this in a lot of forms and nobody could help me yet.
There must be something in my configuration, that makes my SGS2 load a special recovery. (have NO titanium backup installed!!)
..hm ...
humphrey74 said:
I forgot to say that here in detail
Odin said PASS (in green) and before klicking start, the correct connection was signed with the yellow COM field.
There is no KIES problem, I killed all KIES processes in TaskManager before.
I discussed this in a lot of forms and nobody could help me yet.
There must be something in my configuration, that makes my SGS2 load a special recovery. (have NO titanium backup installed!!)
..hm ...
Click to expand...
Click to collapse
Does it boot? and which kernel/recovery do you have installed? which software were you running before you tried to flash to litening?
I had this problem going from villian to litening. I had to install official genertic samsung firmware to sort it out. After I did that I have had no problems with flashing roms.
Sent from my GT-I9100 using XDA Premium App
Yes, it boots. But always into one same state.
I flashed it with XWKDD_insecure.tar (without repart and without PIT file) and then rooted it with "SuperOneKlick".
My Phoneinfo says:
Kernel_version: 2.6.35.7-I9100XWKDD-CL161513 [email protected]#2
Buildnr: GINGERBREAD.XWKE2
After it, cause I was very happy to have a rooted device, I installed AndroidWall, AdFree, AutoKillerMemory, NoLED and AutorunManager
that´s all I did. additionaly I tried to set up the UAString for the stock browser with commands like about:debug, about:config and about:useragent.
That´s all I can remember.
It looks like on the phone there is something, that ignores all flashed data on booting and loads a backup-state. whereever that could be loaded from .... .
humphrey74 said:
Yes, it boots. But always into one same state.
It looks like on the phone there is something, that ignores all flashed data on booting and loads a backup-state. whereever that could be loaded from ....
No it loads what you have flashed last .
Use Odin and an stock rom KF3 with single part file flash without repartition or pit .
Then start again as your posts just show that you have flashed nothing at all .
That kernel is very very old .
Post where Odin fails and post phone details if it boots .
Follow lightning rom instructions fully .
jje
Click to expand...
Click to collapse
I had the same issue, but solved after flashing the GT-I9100_KE7_insecure.tar.md5 kernel.
I believe there's a link to the kernel in this thread
JJEgan said:
humphrey74 said:
Yes, it boots. But always into one same state.
It looks like on the phone there is something, that ignores all flashed data on booting and loads a backup-state. whereever that could be loaded from ....
No it loads what you have flashed last .
Use Odin and an stock rom KF3 with single part file flash without repartition or pit .
Then start again as your posts just show that you have flashed nothing at all .
That kernel is very very old .
Post where Odin fails and post phone details if it boots .
Follow lightning rom instructions fully .
jje
Click to expand...
Click to collapse
I downloaded the old stock kernel 'I9100XWKF3_Kernel.tar' and flashed it with odin.
Result:
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/011> Removed!!
I did it several times. Odin says nothing failed.
After reboot, ..same state!
Phone Details after this:
Kernel_version: 2.6.35.7-I9100XWKDD-CL161513 [email protected]#2
Buildnr: GINGERBREAD.XWKE2
Click to expand...
Click to collapse
You need to flash a full firmware not a kernel .
jje
humphrey74 said:
JJEgan said:
I downloaded the old stock kernel 'I9100XWKF3_Kernel.tar' and flashed it with odin.
I did it several times. Odin says nothing failed.
After reboot, ..same state!
Click to expand...
Click to collapse
Download the full KF3 ROM and flash that using ODIN. Then re-do your root. I recommend using CF-Root instead of Superoneclick. It takes the guesswork out.
Click to expand...
Click to collapse
OK, I downloaded the full KF3 ROM and flashed it with Odin.
Finished with PASS.
No change anfter reboot.
As I said in my first post, I can flash what I want .... device boots up into the same state, as I did flash nothing!
I flashed FULL firmwares, rooted kernels ... etc..
Nothing happens
Download XXKG2 from here
http://forum.xda-developers.com/showthread.php?t=1174161
and flash the 3 file version (wipe version)
OK i did flash the 3-parted KG2 exactly like the instructions say.
Odin says:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKG2_CL375027_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKG2_REV_02_CL1037208.tar.md5 is valid.
<OSM> GT-I9100-CSC-HOME-MULTI-OXAKG2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> Sbl.bin
<ID:0/011> param.lfs
<ID:0/011> zImage
<ID:0/011> factoryfs.img
<ID:0/011> data.img
<ID:0/011> hidden.img
<ID:0/011> cache.img
<ID:0/011> modem.bin
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response form LOKE
<ID:0/011> cache.img
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/011> Removed!!
<ID:0/003> Added!!
As I said .... after reboot thy phone is in same state!!
And now you professionals it´s your turn...
Does it boot straight to OS after flash?
or does it load up recovery (formatting /cache updating media and other stuff)?
omrij said:
Does it boot straight to OS after flash?
or does it load up recovery (formatting /cache updating media and other stuff)?
Click to expand...
Click to collapse
It boots straight to OS after flash. EVERYTIME
hi there
Im not a developer, just a simple user, if were u, these r the tricks that I will play
1- change the usb port
2- restart the computer
3- change the computer
4- uninstall kies and install the independant drivers
5- finally, if all failed, ill wait from kies to do the system update for me, this will give u a fresh start over
hope this would help
drreality said:
hi there
Im not a developer, just a simple user, if were u, these r the tricks that I will play
1- change the usb port
2- restart the computer
3- change the computer
4- uninstall kies and install the independant drivers
5- finally, if all failed, ill wait from kies to do the system update for me, this will give u a fresh start over
hope this would help
Click to expand...
Click to collapse
hey
- I changed the USB port
- I restarted the computer very often
- I tried with other computer
- I tried update with KIES
No other result than it boots into same state
Factory reset after flash?
Yes, I did this too. And not only once ...
No change happens
Hi, yesterday i installed TWRP on my I9505 and I also installed cm 10.1 and it work well, I used it all day today. When i got home i saw that there was a new version of cm so i wanted to update. When i flashed it in twrp i got some error messages, i think it said it couldnt mount /system, I was stupid enough to not write it down. I had to pull the battery to restart and when i rebooted i got the "Firmware upgrade en****ered an issue" message with the triangle.
After this I tried to change recovery with odin to try and flash again but that didnt work and i cant get in to a recovery now. I can get the phone to download mode and odin can see that i plug in the phone. I tried to flash the stock recovery but I get the failed message in Odin. I have also tride to do a reset in Kies but that too failed.
Is there something i can do to save my new phone or did I mess it up permanetly? I was clinging to the hope that if i can get to download mode it can be saved but i dont know.
Any help is greatly appriciated
Bananmos said:
Hi, yesterday i installed TWRP on my I9505 and I also installed cm 10.1 and it work well, I used it all day today. When i got home i saw that there was a new version of cm so i wanted to update. When i flashed it in twrp i got some error messages, i think it said it couldnt mount /system, I was stupid enough to not write it down. I had to pull the battery to restart and when i rebooted i got the "Firmware upgrade en****ered an issue" message with the triangle.
After this I tried to change recovery with odin to try and flash again but that didnt work and i cant get in to a recovery now. I can get the phone to download mode and odin can see that i plug in the phone. I tried to flash the stock recovery but I get the failed message in Odin. I have also tride to do a reset in Kies but that too failed.
Is there something i can do to save my new phone or did I mess it up permanetly? I was clinging to the hope that if i can get to download mode it can be saved but i dont know.
Any help is greatly appriciated
Click to expand...
Click to collapse
did you tried flashing stock fw with pit file?
samersh72 said:
did you tried flashing stock fw with pit file?
Click to expand...
Click to collapse
No i havent. Is the pit file included in the firmware? And do you mean flash fw in odin? Sry if this is a stupid question.
Bananmos said:
No i havent. Is the pit file included in the firmware? And do you mean flash fw in odin? Sry if this is a stupid question.
Click to expand...
Click to collapse
yes with odin.
no pit file is not included.
first flash stock fw without pit file.
if not, flash the fw with .pit file
samersh72 said:
yes with odin.
no pit file is not included.
first flash stock fw without pit file.
if not, flash the fw with .pit file
Click to expand...
Click to collapse
Ok i downloaded the pit file and started downloading fw from samfirmware, it will take a while it looks like. So just to confirm. First i try to flash the FW in PDA in ODIN and if that works it dont need to flash the pit file? If it dosent work i flash the pit file in pit in odin and the the fw?
Thank you very much for helping me.
Bananmos said:
Ok i downloaded the pit file and started downloading fw from samfirmware, it will take a while it looks like. So just to confirm. First i try to flash the FW in PDA in ODIN and if that works it dont need to flash the pit file? If it dosent work i flash the pit file in pit in odin and the the fw?
Thank you very much for helping me.
Click to expand...
Click to collapse
yes. (unzip to get the .pit). dont flash pit file alone! but with firmware.
at the first time, when you flash only firmware in pda, dont mark re-partition
samersh72 said:
yes. (unzip to get the .pit). dont flash pit file alone! but with firmware.
at the first time, when you flash only firmware in pda, dont mark re-partition
Click to expand...
Click to collapse
Ohh ok, I select them both at the same time in Odin?
Bananmos said:
Ohh ok, I select them both at the same time in Odin?
Click to expand...
Click to collapse
yes.
did it succeed when flashed fw alone in pda first?
samersh72 said:
yes.
did it succeed when flashed fw alone in pda first?
Click to expand...
Click to collapse
The download isnt finished yet, its very slow. I will try just the fw first and let you know. If that dosent work ill try it with the pit file.
if the phone enter in bootloop after flashing, wipe data and cache from recovery and reboot
I must go offline now. please report back with the result :good:
samersh72 said:
if the phone enter in bootloop after flashing, wipe data and cache from recovery and reboot
I must go offline now. please report back with the result :good:
Click to expand...
Click to collapse
Ok thank you very much. Will tell you what happens
samersh72 said:
if the phone enter in bootloop after flashing, wipe data and cache from recovery and reboot
I must go offline now. please report back with the result :good:
Click to expand...
Click to collapse
Ok, first I tried without the pit file and its says in Odin that it failed. In the messages windows it says:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDE_I9505VDSAMD8_I9505XXUAMDE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!
I then tried with the pit file and fw but it faild aswell. In the message window it said
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDE_I9505VDSAMD8_I9505XXUAMDE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
Is there something else I can try? Is it possible that this could be something wrong with the hardware?
Try to change usb port
Use original cable
Disable kies from task manager
Be sure that you downloaded fw for i9505 and it is not corrupted
Sent from my Galaxy using xda premium
Ok i will try. Should I use Odin 1.85 or 3.x?
Sent from my Galaxy Nexus using xda app-developers app
Bananmos said:
Ok i will try. Should I use Odin 1.85 or 3.x?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Same result
Sent from my Galaxy Nexus using xda premium
samersh72 said:
Try to change usb port
Use original cable
Disable kies from task manager
Be sure that you downloaded fw for i9505 and it is not corrupted
Sent from my Galaxy using xda premium
Click to expand...
Click to collapse
Ok I tried with the original cabel and in a new USB port and I could flash the fw without the pit file and now everything seems to work. I used odin 3.07. Thank you so very much for helping me. If you have a paypal I´ll be glad buy you a beer och coffe!
Bananmos said:
Ok I tried with the original cabel and in a new USB port and I could flash the fw without the pit file and now everything seems to work. I used odin 3.07. Thank you so very much for helping me. If you have a paypal I´ll be glad buy you a beer och coffe!
Click to expand...
Click to collapse
Glad to hear that. Any time my friend :thumbup:
Sent from my Galaxy using xda premium
samersh72 said:
Glad to hear that. Any time my friend :thumbup:
Sent from my Galaxy using xda premium
Click to expand...
Click to collapse
Hi , i really like you are HELPING us !!!! :good: Good guy :angel:
Thanks from all of us .
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
mattish.91 said:
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
Click to expand...
Click to collapse
Check sammobile.com then firmware for ur phone. Have a nice day
Sent from my Phone.
Edit: or here http://www.sammobile.com/firmwares/2/
Repulsa said:
Check sammobile.com then firmware for ur phone. Have a nice day
Sent from my Phone.
Click to expand...
Click to collapse
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
mattish.91 said:
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
Click to expand...
Click to collapse
Download odin 3.09 then select PDA, and find the file you download now connect the one cable to your PC and press power+volume down to your phone until u reach download mode and connect the other cable to your phone and click start.
Edit: Dont root your device you might Void your warranty after updating.
mattish.91 said:
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
Click to expand...
Click to collapse
What u flashed is only for France Orange branded. They dont have 4.3 for others still
Repulsa said:
Download odin 3.09 then select PDA, and find the file you download now connect the one cable to your PC and press power+volume down to your phone until u reach download mode and connect the other cable to your phone and click start.
Edit: Dont root your device you might Void your warranty after updating.
Click to expand...
Click to collapse
Read this .. http://forum.xda-developers.com/showthread.php?t=2582135&page=2
---------- Post added at 02:12 AM ---------- Previous post was at 02:12 AM ----------
mattish.91 said:
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
Click to expand...
Click to collapse
Read this..... http://forum.xda-developers.com/showthread.php?t=2582135&page=2
If you do really want to upgrade after you read the upper report i can help you cause Odin and Heimdall are no more supported and you cant downgrade anymore to 4.2.2
So think about it twice
And please read here too http://forum.xda-developers.com/showpost.php?p=45666586&postcount=1 ^^
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
xenix96 said:
Read this .. http://forum.xda-developers.com/showthread.php?t=2582135&page=2
---------- Post added at 02:12 AM ---------- Previous post was at 02:12 AM ----------
Read this..... http://forum.xda-developers.com/showthread.php?t=2582135&page=2
If you do really want to upgrade after you read the upper report i can help you cause Odin and Heimdall are no more supported and you cant downgrade anymore to 4.2.2
So think about it twice
And please read here too http://forum.xda-developers.com/showpost.php?p=45666586&postcount=1 ^^
Click to expand...
Click to collapse
Hey mate Read this :Edit: Dont root your device you might Void your warranty after updating < its a warning
mattish.91 said:
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Bro Please remember if you update your phone to newest 4.3, there is no more chance for you to downgrade your system , and if you root/custom your phone / you will Void your Warranty , just like they said on i9506 thread to wait until someone make a custom rom in order NOT to void that warranty for your phone.
Repulsa said:
Hey mate Read this :Edit: Dont root your device you might Void your warranty after updating < its a warning
Bro Please remember if you update your phone to newest 4.3, there is no more chance for you to downgrade your system , and if you root/custom your phone / you will Void your Warranty , just like they said on i9506 thread to wait until someone make a custom rom in order NOT to void that warranty for your phone.
Click to expand...
Click to collapse
Yea. i got that, but now i can't use the phone so how do i reset it? kies doesnt work, and i can't find a proper 4.2.2 that i can flash with odin, root is not required atm...
mattish.91 said:
Yea. i got that, but now i can't use the phone so how do i reset it? kies doesnt work, and i can't find a proper 4.2.2 that i can flash with odin, root is not required atm...
Click to expand...
Click to collapse
Hello again , try here http://www.sammobile.com/firmwares/1/?model=GT-I9506&pcode=EVR#firmware Hope it helps and choose your country.
Repulsa said:
Hello again , try here http://www.sammobile.com/firmwares/1/?model=GT-I9506&pcode=EVR#firmware Hope it helps and choose your country.
Click to expand...
Click to collapse
Still can't download from those sources since they are too slow, can someone upload it somewhere else please? im allways getting interupted download...
mattish.91 said:
Still can't download from those sources since they are too slow, can someone upload it somewhere else please? im allways getting interupted download...
Click to expand...
Click to collapse
I cant try to download the file i have a 50/50 mbps and make a mirror for you but i need to know what file are you tring to download baseband, country , Carrier and such. have a nice day.
Repulsa said:
I cant try to download the file i have a 50/50 mbps and make a mirror for you but i need to know what file are you tring to download baseband, country , Carrier and such. have a nice day.
Click to expand...
Click to collapse
This is the file: http://samsung-updates.com/details/18144/Galaxy_S4_LTE-A/S800/GT-I9506/HTS/I9506XXUAMJ2.html the source is your's Thanks you'r awesome!
mattish.91 said:
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Yes, AP is correct. Try a different data cable.
Enviado desde mi GT-P7510 usando Tapatalk 2
mattish.91 said:
This is the file: http://samsung-updates.com/details/18144/Galaxy_S4_LTE-A/S800/GT-I9506/HTS/I9506XXUAMJ2.html the source is your's Thanks you'r awesome!
Click to expand...
Click to collapse
Hello again here is the 4.2.2 firmware for your GT-I9506 , Make sure to Follow the instruction. and hoping to fix your problem, Have a nice day.
Gt-19506 4.2.2 Firmware https://mega.co.nz/#!XV4wRZ6b!LEDB9WuyI9SLUjqDsPrlBhTRSo9z1Sz6uWRCiq74qE8
Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Power + Volume down buttons) in order to reach download mode.
- Connect phone and wait until you get a blue sign in Odin
- Add I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md 5 to AP
- Make sure re-partition is NOT ticked
- Click start button, and wait a few minutes.
-Your phone should automatically reboot after completion
-You can now disconnect your phone from computer .
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Repulsa said:
Hello again here is the 4.2.2 firmware for your GT-I9506 , Make sure to Follow the instruction. and hoping to fix your problem, Have a nice day.
Gt-19506 4.2.2 Firmware https://mega.co.nz/#!XV4wRZ6b!LEDB9WuyI9SLUjqDsPrlBhTRSo9z1Sz6uWRCiq74qE8
Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Power + Volume down buttons) in order to reach download mode.
- Connect phone and wait until you get a blue sign in Odin
- Add I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md 5 to AP
- Make sure re-partition is NOT ticked
- Click start button, and wait a few minutes.
-Your phone should automatically reboot after completion
-You can now disconnect your phone from computer .
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Click to expand...
Click to collapse
This is my result:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so this wasn't working, any idea? xD
mattish.91 said:
This is my result:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so this wasn't working, any idea? xD
Click to expand...
Click to collapse
You are trying to flash a stock 4.2.2 over a 4.3 knox bootloader!!!! If course you will get error!!!!
Since you have 4.3 knox bootlader, you only can flash stock 4.3 roms. Download the last update for your model from sammobile and reflash again with same process.
Enviado desde mi GT-I9500 usando Tapatalk 2
jaswinky said:
You are trying to flash a stock 4.2.2 over a 4.3 knox bootloader!!!! If course you will get error!!!!
Since you have 4.3 knox bootlader, you only can flash stock 4.3 roms. Download the last update for your model from sammobile and reflash again with same process.
Enviado desde mi GT-I9500 usando Tapatalk 2
Click to expand...
Click to collapse
im sorry, im totally lost and confused, what am i missing, there is only one 4.3 rom that is flashable throu odin and thats the french version and that should work in Sweden aswell, when i flash that rom i'm still getting that error, should i try to flash root before continuing? incase yes, which one? Im really grateful for all your help.
mattish.91 said:
im sorry, im totally lost and confused, what am i missing, there is only one 4.3 rom that is flashable throu odin and thats the french version and that should work in Sweden aswell, when i flash that rom i'm still getting that error, should i try to flash root before continuing? incase yes, which one? Im really grateful for all your help.
Click to expand...
Click to collapse
hello again , i did not know that you have a the newest bootloader for your phone and yet you requested a 4.2.2 anyways since your Knox void warranty is not 0x1 yet go ahead and send it back for repair , im sure they will fix this problem, since you did not void your warranty yet that's the best solution i can give you. or wait to someone here on xda know's how to fix this issue. have a nice day.
Repulsa said:
hello again , i did not know that you have a the newest bootloader for your phone and yet you requested a 4.2.2 anyways since your Knox void warranty is not 0x1 yet go ahead and send it back for repair , im sure they will fix this problem, since you did not void your warranty yet that's the best solution i can give you. or wait to someone here on xda know's how to fix this issue. have a nice day.
Click to expand...
Click to collapse
The problem is solvet simply flashed root, the only thing not working (so far) is keyboard xD and it is running 4.3
Hello I was trying to root my G900F that is currently running Lollipop BNL7 with CF-Auto-Root-klte-kltexx-smg900f and Odin 3.09 after enabling USB debug but Failed at the end of the process. Had to restore stock G900FXXU1BNL7 to get phone back working.
Try it two times always fails at the end.
Any other method or have to wait for updated version of CF-Auto?
Does G900FXXU1BNL7 is rootable?
Is there a way to downgrade to 4.4 safely as I try already and end up in nightmare and dont have EFS backup that is why I want to root first.?
Code:
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
egejo said:
Hello I was trying to root my G900F that is currently running Lollipop BNL7
Click to expand...
Click to collapse
You haven't done anything serious. Don't worry. You can only use SuperSU 2.38 or above versions. No other method works for TouchWiz Lollipop so far.
Reactivation lock
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I think you already enable (Reactivation lock) from setting --> security
Just uncheck the option and i hope it will work fine
Thanks for the advice but did not work.
I have try these way so to first load a custom recovery via odin to root and install SUperSu tested with both Philz and TWRP but failed also on Odin at the end of the process of each of them.
Had to put stock BNL7 again to recover the phone from "firmware upgrade issue" screen
Does BNL7 has some locked bootloader security or so I cant mod anything neither root it now...
lingowistico said:
You haven't done anything serious. Don't worry. You can only use SuperSU 2.38 or above versions. No other method works for TouchWiz Lollipop so far.
Click to expand...
Click to collapse
egejo said:
Thanks for the advice but did not work.
I have try these way so to first load a custom recovery via odin to root and install SUperSu tested with both Philz and TWRP but failed also on Odin at the end of the process of each of them.
Had to put stock BNL7 again to recover the phone from "firmware upgrade issue" screen
Does BNL7 has some locked bootloader security or so I cant mod anything neither root it now...
Click to expand...
Click to collapse
Yes some people say that it only works with Fusion TWRP 2.8.2.0. I don't know if it's true because I already flashed it before flashing SuperSU 2.38 beta And of course it worked.
i cant install recovery mode on bnl7 . Tried it whole day and all i get is stock recovery mode.
Help ?
lingowistico said:
Yes some people say that it only works with Fusion TWRP 2.8.2.0. I don't know if it's true because I already flashed it before flashing SuperSU 2.38 beta And of course it worked.
Click to expand...
Click to collapse
Thanks, sorry to be such a noob but downloaded the Fusion TWRP you post got the zip... but how to install if unzipped there is no odin Tar or such flashable file...neither like and apk, sorry lost in here?
Lastly to let you know that now I'm in Stock G900FXXU1ANCE, dowgraded from BLN7 to BLN2, then ANJ1 and then ANCE. On all of them I have been trying to root or put a custom recovery, used CF-Auto-Root-klte-kltexx-smg900f, openrecovery-twrp-2.8.1.0-klte or philz_touch_6.57.8-klte with same results always Failing Odin at the end of process... The thing I notice is that always it shown on the dowload mode screen
"QUALCOMM SECURE BOOT: ENABLED (CSB)"
Even after downgrade, could these be the issue?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.57.8-klte.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Made a little progress here,
As I'm now on G900FXXU1ANCE I used towelroot and finally gain root access it Work installed SuperSu from Gplay and then finally made an EFS backup with samsung tool...
But still dont know why it does not work all other methods and ODIN rooting and cant have a custom recovery neither...But for now I feal a little safer having my EFS on Dropbox to be sure....
Will keep playing trying to get a working custom recovery so to flash customs roms later...But looks like I will have to wait for updates now...
egejo said:
Made a little progress here,
As I'm now on G900FXXU1ANCE I used towelroot and finally gain root access it Work installed SuperSu from Gplay and then finally made an EFS backup with samsung tool...
But still dont know why it does not work all other methods and ODIN rooting and cant have a custom recovery neither...But for now I feal a little safer having my EFS on Dropbox to be sure....
Will keep playing trying to get a working custom recovery so to flash customs roms later...But looks like I will have to wait for updates now...
Click to expand...
Click to collapse
had the same problem as you use this twrp it worked perfect in the end make you scroll down to where it says THE GOODS TWRP ODIN its near the bottom of first post in this link http://forum.xda-developers.com/showthread.php?t=2697762
pnr2020 said:
had the same problem as you use this twrp it worked perfect in the end make you scroll down to where it says THE GOODS TWRP ODIN its near the bottom of first post in this link http://forum.xda-developers.com/showthread.php?t=2697762
Click to expand...
Click to collapse
Thanks but tested an did not work Odin Fails flashing it.
I can only flash stock roms and root on those old enough for towelroot...
I'm starting to think these brand new S5 SM-G900F is starting to come with locked bootloader....
Is there a way to verify these...?
egejo said:
Thanks, sorry to be such a noob but downloaded the Fusion TWRP you post got the zip... but how to install if unzipped there is no odin Tar or such flashable file...neither like and apk, sorry lost in here?
Click to expand...
Click to collapse
This is the story that I heard and followed, after which I got root on bln2:
You can only get root on Samsung Lollipop with SuperSU v2.38 and above, but the only 100% sure way to flash SuperSU v2.38+ is by flashing it in Fusion TWRP 2.8.2.0.
So you do it like this:
1 Flash rom in odin
2 Flash custom recovery in Odin (CWM/TWRP doesn't matter)
3 Now boot custom recovery and flash the Fusion TWRP 2.8.2.0 zip file
4 Reboot recovery
5 Flash SuperSU v2.38+ zip
6 Enjoy root
lingowistico said:
This is the story that I heard and followed, after which I got root on bln2:
You can only get root on Samsung Lollipop with SuperSU v2.38 and above, but the only 100% sure way to flash SuperSU v2.38+ is by flashing it in Fusion TWRP 2.8.2.0.
So you do it like this:
1 Flash rom in odin
2 Flash custom recovery in Odin (CWM/TWRP doesn't matter)
3 Now boot custom recovery and flash the Fusion TWRP 2.8.2.0 zip file
4 Reboot recovery
5 Flash SuperSU v2.38+ zip
6 Enjoy root
Click to expand...
Click to collapse
I cant flash any custom recovery at all it always fails and softbricks the phone... Looks like these G900F is now bootloader Locked...
If so samsung is now selling them from factory locked not just ATT versions...
egejo said:
Thanks but tested an did not work Odin Fails flashing it.
I can only flash stock roms and root on those old enough for towelroot...
I'm starting to think these brand new S5 SM-G900F is starting to come with locked bootloader....
Is there a way to verify these...?
Click to expand...
Click to collapse
dont know to be honest mine only 2 weeks old from uk was on BTU but now on polish version
egejo said:
Looks like these G900F is now bootloader Locked...
Click to expand...
Click to collapse
I don't think so, everything works fine for me..
i also cant install recovery but i dont get soft bricks , just normal stock recovery mode all over.
"qualcomm secure boot: Enabled (csb)
hello everyone
if you got error in odin when flash any custom recovery just deactivate reactivation lock from setting>security.
Hello everyone.
I would really like to be able to remove remove unnecessary, bloatware and energy consuming apps for example google +, hangouts, dropbox,...and maybe even the play store.
I want to take full control of my phone so every piece of information is welcome.
I have a Samsung Galaxy S3 Neo phone with the following specifications:
Model number:
GT-I9301I
Android version:
4.4.2
Android security patch level:
2006-06-01
Baseband version:
I9301IXXUAPG1
Kernel version
3.4.0-6004186
[email protected] #1
Wed Jan 4 19:28:00 KST 2017
Build number:
KOT49H.I9301IXXSAQA1
SE for Android status
Enforcing
SEPF_GT-I9301I_4.4.2_0055
Wed Jun 29 20:36:25 2016
Security software version:
ASKS v1.2_161011
https://forum.xda-developers.com/ga...overy-t-r-p-samsung-galaxy-s3-neo-gt-t2906840
Hopefully its help you !! Cheer bro
I am not sure it's going to work and I really wouldn't like to make my phone useless.
Thanks for your reply though.
mitu725 said:
https://forum.xda-developers.com/ga...overy-t-r-p-samsung-galaxy-s3-neo-gt-t2906840
Hopefully its help you !! Cheer bro
Click to expand...
Click to collapse
Update
P.S. And I don't know if the build number is the same.
I got the impression that it matters and if you don't get the right tools for the exact phone specifications you render you phone useless.
meekss said:
I am not sure it's going to work and I really wouldn't like to make my phone useless.
Thanks for your reply though.
Click to expand...
Click to collapse
Need help with this as well
Basically the same situation as OP, same phone, same build number.
Samsung Galaxy S3 Neo
Model: GT-I9301I
Build: KOT49H.I9301IXXSAQA1
Prior to my rooting attempts I enabled debug mode, installed the USB drivers and made a full backup via MyPhoneExplorer.
I tried rooting it with CF-Auto-Root. Went to the site, selected the correct model and build (it was listed twice, tried both) and downloaded the Auto-Root package as well as the provided original boot and recovery images. When I try to flash the CFAR image.tar.md5 file, Odin initiates the transfer, however it fails to complete the task.
Here is the log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> cache.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The progress bar stops at around a quarter completed and my phone says "unsupported dev_type" in red letters, rebooting it results in a message that a firmware upgrade encountered a issue and it won't boot.
Thankfully it isn't bricked (yet) as I am able to use Odin to flash the original boot image successfully after which the phone boots normally again.
I tried several versions of Odin all with the same result, I even tried running it in Windows XP compatibility mode which interestingly doesn't make it fail but crash the application at the point where it normally would.
However, that's not helping me getting it rooted so any help would be much appreciated.
Here are the steps:
- install twrp via flashing it with Odin.
- after that make a full backup with twrp just in case
- flash supersu which will give you root (sometimes there is an option in twrp to flash supersu)
Best way to root s3 neo is SuperSU
I had the same version you have, so the solution is:
You'r version cannot be rooted. You have to change it.
Flash this version with Odin you will find on google or here : I9301IXXUANC6 : https://samfrew.com/download/Galaxy__S3__Neo+__/128t/ATO/I9301IXXUANC6/I9301IOXAUANC6/
Then flash recovery to TRWP or something else, then install SuperSu with TRWP recovery or others, and finally flash ROM if you want.
Have fun, tell me if it worked.