[Q] Problems with Odin and Download Mode - Galaxy Spica General

Hello !...Please help me !!!!
I have the following problem: I've got this spica samsung from a friend who damaged it very badly, i mean, he installed an android 2.3 cyanmode etc ...anyway, i tried to fix it by flashing it with odin. I've found the devices for the phone, everything is conected,the phone is in download mode, odin recognizes the phone...but...after i press start, it shows this:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
and that's it...nothing is happening even if i leave the phone conected for an hour.
So i'm guessing the phone dosen't receive any data. Please help !
Thanks a lot !

My problem is similar. I had some cyanogenmod froyo(don't know exactyl which), but it was pretty unstable so I've tried to put back to 2.1 OMG v1.22.12.10 but when I've installed zip from SD something failed, then I've tried to install it again and it has installed it. Then when I've reboot it it just stuck on boot screen and nothing happens. Now I don't know how to fix this, I've tried to flash phone again but computer sometimes doesn't even recognize my phone. When I reinstall drivers it connects and next time it's unknown device again ...
Help?!:crying:

If download freezes on "setup connection"
1) disconnect phone
2) turn off it
3) enter download mode again
4) connect phone to PC
Keep trying until Odin starts to download firmware.

Related

Bricked g3? :<

Hi guys, i've just flashed kyliriols 4.0 RC on his 3.3, and odin said me: FAIL!, so i closed him, made wipe cache/partition, and get into download mode. And now Odid gives me sth like that:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 5
I cannot flash jpd, jpf, kylirios 3.3, 4.0.
Which rom should i flash, and which one it CANs be flashed.
Can ya guys help me?
Akaane said:
Code:
Hi guys, i've just flashed kyliriols 4.0 RC on his 3.3, and odin said me: FAIL!, so i closed him, made wipe cache/partition, and get into download mode. And now Odid gives me sth like that: Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 5
I cannot flash jpd, jpf, kylirios 3.3, 4.0, nothing.
Can ya guys help me?
Click to expand...
Click to collapse
did you umplug the usb cable??????
nope,
i want to add that, i still can get into download mode, and phone is soft bricked.
Akaane said:
nope,
i want to add that, i still can get into download mode, and phone is soft bricked.
Click to expand...
Click to collapse
go to download mode first flash JPF without bootloader(important)when the boots completly press the power button and hold it until you see the battery icon then go to download mode again and flaSH KIRILLOS 3.3 as one package just follow the procedure and everything will be allright if you have any problems PM me OK?
Cannot flash any software, ive got only xxjpd, xjpf, kyrillios 4.0, 3,3. What should i download and try to flash? :F
Now phone boots, after few resets, but its force-closeing all apps, and i cannot finish setup. Cant flash any soft, but can go into download mode.
did you turn odin off/on?
Akaane said:
Cannot flash any software, ive got only xxjpd, xjpf, kyrillios 4.0, 3,3. What should i download and try to flash? :F
Click to expand...
Click to collapse
try kyrillos 3.3 and see the video he has put ull get an idea to flash any roms thereafter
can u go to download mode ?
Why don't ur just flash eclair again. DL it from samfirmware.com. Once it boots you can flash anything your want
Sent from my GT-I5800 using XDA App
even i faced same problem as you just falshed the 2.1 then 2.2 JPF then to kyrillos 3.3 its working now y dont you give a try
Wazz, I've already tried to ruin 20-22 but have not met one.

[Q] Odin flashing problem [help]

Hey ! i got a problem out there. When im trying to flash a rom into my device (galaxy 3) i got this after 2 minutes and nothing hapens in any time...
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
I waiteh half an hour but nothing happened wheres the problem ??? stock rom sucks...
PLEASE HELP
Can you give us some more details ?
Have you put your phone in Download Mode ? Have you tried to re-install the drivers on your computer ?
Just reflash ^^
Try Re-installing drivers
or check the USB port n give little more detail if u still face it
androidaz5800 said:
Hey ! i got a problem out there. When im trying to flash a rom into my device (galaxy 3) i got this after 2 minutes and nothing hapens in any time...
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
I waiteh half an hour but nothing happened wheres the problem ??? stock rom sucks...
PLEASE HELP
Click to expand...
Click to collapse
put your phone in download mode and connect it with usb to our pc and you must me sure that the files are coorect and if it is a single tar file you must check one package box and fire up tour odin
happy flashing

[Q] [SOLVED] Odin Problem

I was trying to flash my G3 with Kyorarom 0.4.0 but Odin doesn't seem to progress beyond this point:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V2, P9,R2
<1> START!!!
<1> set download environment.
[B]<1> big partition size!![/B]
<1> logo.png download..
This is the first time I've encountered "big partition size!!" in Odin.
I tried removing the SD card as well as SIM too. No change. Hitting the same block. Any help?
Problem resolved. Had to download it again. Had fiddled with the original downloaded tar file.

problem during flashing feamod 1.2 via ODIN 4.43

Hi guys!
I've got a stock samsung i9001 with root.
when i attempted to flash feamod 1.2 via odin it stopped to
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
after 6 minutes i disconnected di USB and odin adds in the log:
Code:
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
the phone is ok but what is the problem? i followed the guide in this section

[Q] problems with odin

yesterday when i was trying to flash my device, so i put my phone on download mode and i connected it with my pc. then, when i started te flash with odin the process gets stucked in setup connection, exactly this message
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
what is happening? how can fix it?
thank you
lovenduro said:
<1> setup connection...what is happening? how can fix it?
Click to expand...
Click to collapse
shut down KIES, when you run Odin , look at solutions in My Android Solutions

Categories

Resources