It seems my Nexus 7 seems to be hosed.
It was running the latest android os as pushed out by google (maybe 4.2.1?) Not sure what I did, but I am in the APX mode and I cannot exit it. The screen is completely dark, and I am not sure it is working when I press the buttons.
I have held:
Power button for 60+ seconds
Power + volume up
Power + volume down
Power + volume up + volume down
If the device is plugged into my laptop, I get a beep after holding any aforementioned combination indicating that the system detects the device but it shows up in the device manager as APX with a question mark.
I have opened the back, and disconnected and reconnected the battery.
Prior to noticing it was not working, I set a torrent download using µtorrent. My initial guess was that the battery discharged, but I have been charging it now for a few hours without any resolution.
Please help! I am past the returns for Walmart, and I do not want to ship it to ASUS to have it repaired.
Bump.
This is frustrating. I have never owned an android tablet before, and I had no intentions of rooting it. Now I have no idea if I can even recover it. Other threads are saying I am hosed because nvflash does not work on the nexus 7.
Any ideas besides throwing it in the garbage?
Try letting the battery die.
Or try these tips: http://forum.xda-developers.com/showthread.php?t=1789135
Related
Anyone having boot problems?
Waiting the case, i have put my tab in his box moving from a place to another, when i took it i saw a green andoid image with the message "POWER RESET or UNKNOWN UPLOAD MODE".
Now it is blocked in this message state. Can't turn off, reboot ...use it...
Anyone know the way to reboot (key combination)? if galaxy tab has a recovery system? or something in order to resolve this problem?
Just to know, no root attempts, only some application normal installed from the market...
hi, i think if you press the power button and leave it pressed, it will reboot.
after the battery charge finished and the recharged all work fine...
i think the "block state" has been caused from the home+volume keys that probably were were pressed in the box..
it would be usefull to know these key-press effects
They are standard android combos. Google is your friend.
I stumbled across this screen while my Samsung SGH-I897 (Captivate) was powered down, hooked up to my PC using the USB cable and the battery was half way charged. I held down both the power and volume up buttons for a few seconds and got to this screen before the unit attempted to boot. It remained there until I held down the same key sequence for about 5-7 seconds. It's now back to a powered off state, still hooked up to my PC via the USB cable, and the display has the standard large battery icon showing it at about 50% charged. Leaving the Captivate idle will continue to charge my phone via USB (abeit slower than having it attached to the power adapter) and the screen shuts itself off. It practically looks like it's fully off or fully dead like this, but it's not.
Hi Everyone,
I know its a few threads about how to unbrick Advent Vega and how many threads is that many ideas how to do it.
I was running ViewCOMB 3.2 built 5.1 and everything was ok, but ive installed Rom Manager from Market, and tried other rom (wrong one ).
After reboot nothing is happening, i mean when i press power button for ok 10 sec and then short press again, screen is on black with backlight for about 1 sec and keep coming off.
Ive tried to turn into boot mode (2sec. back + 2 sec. power) about 1000 times already with power cable on and off, but nothing happening.
I have drivers installed on my laptop (had installed custom rom already).
I want to specify a few facts:
Is battery must be charged to full? or should start another try from flat?
If so, how to drain battery if tablet wont power up?
Is better to try with power cable on or off?
Some people saying about holding buttons for a 2 sec, other for 1 sec, what is right?
Any ideas?
Many thanks!
Finally after hours of pressing and holding power + back buttons I've sorted it.
- hold power button for about 10 sec. (to make sure device is off)
- hold back button 2 sec. (don't release)
- press power button till notification sound will come on.
Then had notification sound from Windows about new device connected. On my device list was Nvidia usb boot-recovery device.
Before last try I've charged battery to full (blue light) then disconnected power cable. I couldn't do it with battery full and power cable in (strange).
I think the main hint is to make sure that device is off. Ive noticed that even if screen is off device might be running.
Hopefully this little explanation will help
okti said:
Finally after hours of pressing and holding power + back buttons I've sorted it.
- hold power button for about 10 sec. (to make sure device is off)
- hold back button 2 sec. (don't release)
- press power button till notification sound will come on.
Then had notification sound from Windows about new device connected. On my device list was Nvidia usb boot-recovery device.
Before last try I've charged battery to full (blue light) then disconnected power cable. I couldn't do it with battery full and power cable in (strange).
I think the main hint is to make sure that device is off. Ive noticed that even if screen is off device might be running.
Hopefully this little explanation will help
Click to expand...
Click to collapse
THAAAAAAAAAAAANNNNNKKKKK YYYYYYYYYOOOOOOOOOOUUUUUUU!!!!!!!!!!!!!!!!!!! I had the same problem and I thought it was bricked for like, 4ever, so THNX!!!
i had exactly the same problem last night when i asked CWM to do a backup and the screen went black and wouldnt switch on.
one way to tell if it hasnt powered off properly when its stale booting is to look under the black surround between the screen and the camera and you may see a faint blue light. Only viewable with about 5 deg viewing angle (so same as the screen LOL)
i found i could not get it into boot mode at all. No matter how many times i did it. Ending up taking the back off and pulling the battery and then trying again - guess what? Worked straight away first time!!!
I can only presume that when its in this stale boot state it isnt shutting down properly, even if the light is off etc. Although i did come across a post after sorting it that said sometimes it can take a 60 second press of the power button to properly shut it down when its in stale boot.
So now i'm back to standard modded stock rom 2.2 and its horrendous!!!!
Just finished downloading the beta ics rom exe - so gonna whack that on and have a play! Hope its as good as they say it is. If it isnt, then i'll put honeycomb back on.
I think that instead of pulling tha battery out you could also press and hold the power button for 9 seconds, right?
Today, after I was done using my tablet, I shut it off and noticed it turned off but the green led portion of the power light is still on. Tablet will not respond to power on/off commands, nor can I gain access to it via adb.
I updated to the Energy™ -.¸¸.·´¯ ICS CM9 Kang ROM several days ago, there were no problems there as I have been using the rom for a couple of days now.
All I did was hold the power button down, select "Power down" option came up "this will shut down your tablet" I selected "ok" and that was that.
KFU shows it as offline, as does adb. Windows does not detect the device.
Mine had a similar experience, using AOKP ICS, I powered it off and about 18 hours later I tried to turn it on and got nothing. Turned out the battery was just dead, I think it may have locked up while powering down and killed the battery. I would try a few things:
1. Hold down the power button for 10+ seconds and see if you can get it to do a hard shutdown.
2. Plug it in to the charger and see what happens.
3. Leave it alone for a while and hope the battery dies and it may start up after that when plugged in.
I kind of feel stupid, why is it with technology us geeks start troubleshooting by skipping the simple solutions, like "is it plugged in" well today, holding down the power button for 20 seconds fixed the problem. She booted up and everything is back to normal.
Appreciate the fast reply!
I've had my nexus 7 for about 3 weeks now. Was working great until last night. I haven't altered it such as rooting or custom ROM since I bought it. Besides some apps I have installed via the play store, it can be considered very very factory stock.
Battery was low and it started the automatic shut down because the battery level hit the critical point. It shut down and then I plugged it back in and turned it back on. It was halfway through the boot up (showing the multi-colored X) and the screen went blank and I heard what could be a farting sound, then nothing.
I've tried holding down the power button for more than 30 seconds (timing it on my watch) and I've tried the power button and both volume up/down buttons in the same manner. Nothing.
I let it charge overnight on the factory charger with factory cable. No change.
I opened the back up and disconnected the battery for a few minutes then reconnected. No change.
I plugged it into my computer and it detects and I was able to install the drivers for "Asus Transformer Prime APX Interface". If I hold the power button for 10 seconds while it is connected to my PC the PC detects that the device is disconnected and then reconnected about 5 seconds later. So the device does something.
I tried using the android-sdk to communicate with the device but nothing. ADB doesn't detect the device, fastboot doesn't either.
At this point, I'm thinking the device is as hard bricked as can be but hopefully someone here can tell me otherwise. If I don't get a response within a week, I will be attempting to get a replacement - my wife bought it brand new for me from a private seller on eBay, so I don't have an actual store to return it to.
Hello,
I have been having a few odd issues with my Nexus 4, random reboots, no sound from speakers unless a reboot. Anyway Last night I had it on charge and it started rebooting itself in a loop so I managed to break the cycle and I ended up on a screen with a android on its side with a big arrow pointing at the power button, so I pressed the power button and it rebooted and was sat on the Nexus 4 logo.
I left the phone doing that and when I came back a while later the phone was still on the Nexus logo (which was still animating) but the phone was roasting hot, I turned the phone off by holding the power button.
Anyway, now the Nexus will not turn on, when it is plugged into a power source I get a red LED for a couple of seconds and then it goes out. In device manager I have qhsusb_dload in device manager.
I have done many hours of searching, I tried a few things suggested on other posts using Ubuntu but nothing.
This was a stock device that had only ever been updated with official updates. I can send it back no problem but I thought I would try save everyone's time and effort and see if there was anything I could try.
Thanks
qhsusb_dload stands for Qualcomm high speed download mode. Theres nothing you can do, other than a jtag. Sorry