Related
I tried to create a CM7 bootable SD card per the thread entitled "Size-agnostic SD Card image and CM7 installer for SD Cards. with updater."
I used WinImage to create the supposedly bootable SD card with the installer, placed it into my Nook which was fully off, and the Nook booted as usual instead of from the SD card.
Am I missing something? How do you boot from an SD card?
Is there such a thing as a boot choice menu like on my PC or is the default always to boot from the SD card?
Does the Nook have to be rooted for this to work?
Thanks
ETA: My PC shows the uSD card as nearly full, but my Nook shows the SD card as nearly empty (1.74 out of 1.84 GB available).
When you bought your Nook, did it have a blue sticker on the box? And does internal storage show 1GB or 5GB for you?
Also, you did drop an update CM7 zip file onto the imaged uSD before you tried booting off it right?
angomy said:
When you bought your Nook, did it have a blue sticker on the box? And does internal storage show 1GB or 5GB for you?
Also, you did drop an update CM7 zip file onto the imaged uSD before you tried booting off it right?
Click to expand...
Click to collapse
No blue sticker was on the box. The internal storage shows 5GB.
Yes, I had a CM7 zip file on the imaged card. (The latest encore nightly)
Interestingly, my PC shows the uSD (2 GB) as nearly full. The Nook shows it as nearly empty (1.74 out of 1.84 available).
JowBe said:
No blue sticker was on the box. The internal storage shows 5GB.
Yes, I had a CM7 zip file on the imaged card. (The latest encore nightly)
Interestingly, my PC shows the uSD (2 GB) as nearly full. The Nook shows it as nearly empty (1.74 out of 1.84 available).
Click to expand...
Click to collapse
When you burned the installer img, did you run WinImage as administrator? Also, when you put it in your reader it comes up as boot (drive letter in Windows, with files like uImage, uRamdisk, mlo, u-boot.bin, right?
angomy said:
When you burned the installer img, did you run WinImage as administrator? Also, when you put it in your reader it comes up as boot (drive letter in Windows, with files like uImage, uRamdisk, mlo, u-boot.bin, right?
Click to expand...
Click to collapse
Yes, I ran WinImage as administrator. And yes, it shows up in Windows explorer as boot and yes those files are there.
Could it be because my Nook operates in "factory mode," in order to skip initial registration?
You should run it and register it and setup wifi and everything first. Get the stock software working fine and dandy (its not half bad actually). Then, checkout this guide for installing CM7 onto an SD card:
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
It has worked for some rooting rookies so far and includes both windows and mac guides specific to SD cards.
JowBe said:
Could it be because my Nook operates in "factory mode," in order to skip initial registration?
Click to expand...
Click to collapse
I'm not sure, because I ran through initial registration on stock prior to running CM7 off SD --- I used the same image (verygreen's agnostic at http://forum.xda-developers.com/showthread.php?t=1000957) as you did without a hitch.
If you decide to run CM7 off internal sometime you're going to need to register the nook anyway.
You could try an alternate bootable SD (e.g., using an image from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34) to eliminate one of the two: a) your nook having issues booting from SD or b) your SD install is not set up correctly.
An update: I decided to try to create a bootable SD from another bootable image (MonsterRootPack with CWR). This time the nook wouldn't even turn on. I'm going to try to create a third bootable SD as angomy has suggested to see what happens.
I need to add that when I removed the uSD card, it booted normally.
Also, when I create the bootable SD with winimage, I get a dialog box that tells me that the format of the SD card is not right and asks me if I want to resize the image. But this happened on both the images. I don't know if this has anything to do with it.
angomy said:
You could try an alternate bootable SD (e.g., using an image from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34) to eliminate one of the two: a) your nook having issues booting from SD or b) your SD install is not set up correctly.
Click to expand...
Click to collapse
Ok, I tried the CWR image in the link you gave. Same problem - no-go. Just sits there dead. I remove the uSD and it boots normally.
FWIW you do not have to boot into stock B&N at all before you setup and install to CM7 SD card. One of my NCs has never ever booted into stock ROM at all, I installed CM7 onto SD card and running off that from the moment it was unboxed.
The NC will always boot off the SD card first, so if it's booting off eMMC instead then there must be something wrong with the img that you wrote to your SD card.
Make sure that you have a freshly formatted SD card, preferably one with good small random block r/w speeds (eg Sandisk class 4 8G). Follow the instructions in verygreen's "Size Agnostic..." OP to the letter. Re-download all the files as you may have a corrupted one. Make sure to check MD5 this time. Try using Win32diskimager instead, the 0.1 version works better.
It should work. Good luck.
ebubar said:
You should run it and register it and setup wifi and everything first. Get the stock software working fine and dandy (its not half bad actually). Then, checkout this guide for installing CM7 onto an SD card:
http://clubnook.com/forum/showthread.php?953-Rooting-Instructions
It has worked for some rooting rookies so far and includes both windows and mac guides specific to SD cards.
Click to expand...
Click to collapse
Thanks for the link. I have given this some thought, and it doesn't seem reasonable that booting from an SD card should depend upon the state of registration of the device because the whole idea of booting from an SD card means that the content of the SD card is loaded in the place of the stock software.
robot8 said:
FWIW you do not have to boot into stock B&N at all before you setup and install to CM7 SD card. One of my NCs has never ever booted into stock ROM at all, I installed CM7 onto SD card and running off that from the moment it was unboxed.
The NC will always boot off the SD card first, so if it's booting off eMMC instead then there must be something wrong with the img that you wrote to your SD card.
Make sure that you have a freshly formatted SD card, preferably one with good small random block r/w speeds (eg Sandisk class 4 8G). Follow the instructions in verygreen's "Size Agnostic..." OP to the letter. Re-download all the files as you may have a corrupted one. Make sure to check MD5 this time. Try using Win32diskimager instead, the 0.1 version works better.
It should work. Good luck.
Click to expand...
Click to collapse
Thanks. Yes, I just replied to another poster that I didn't think that the state of registration of the device should matter since the whole purpose of a bootable SD card is to load the contents of the SD in place of the stock.
I have followed the instructions in verygreen's thread to the letter - several times. Also, I have tried to make other bootable SDs without success. But that's a good idea about trying Win32diskimager. Also, I will try a Sandisk class 4 card SD as soon as I can get to a store.
I do have a question. When I format the SD card what "allocation unit size" should I be using? (formatting through Windows) The default is 32 kb.
PROBLEM SOLVED!
Thanks to everyone for trying to help me figure this out. The winning idea belongs to robot8.
When I switched from using WinImage to using Win32diskimager, it worked immediately. I am now running CM7 on my Nook Color! Took forever and a day to boot though.
Congrats!
Re: allocation unit size, do you mean cluster size? Depends on how big the FAT32 partition is --- larger clusters used means more actual space used but too large a size can reduce access speed. Generally Windows defaults to suggested 4k for up to 8GB, 8GB-16GB = 8k, 16-32GB = 16k, and 32+ = 32kb.
Also the first boot is the longest --- shouldn't take as long after that. Welcome to CM7 - I don't regret installing it over stock after waffling for weeks on whether or not I'd use stock at some point -- CM7 is just too much faster with too many more options and tweaks for my impatience to deal with stock Froyo.
THANK YOU OP!
I had the same issue, tried 20x various ways, 2 different computers, 2 different SD readers, and it was WinImage that wasnt working correctly. Win32DiskImager solved it.
Thanks.
JowBe said:
PROBLEM SOLVED!
Thanks to everyone for trying to help me figure this out. The winning idea belongs to robot8.
When I switched from using WinImage to using Win32diskimager, it worked immediately. I am now running CM7 on my Nook Color! Took forever and a day to boot though.
Click to expand...
Click to collapse
Thanks so much! This finally got it to work for me too. Loving my new Android tablet
FWIW, WinImage does not work. Maybe it used to work, but it does not now. I posted about this a few days ago here.
Hello first I want to say a big THANK YOU to everyone that has put time and effort into making the Nookie what it is today....but I have a noob question.
I recently got a 16gb micro SD and can successfully get the 0.6.8 Nookie to run on my nook color, my problems start when I try to "recover" my other 13gb's. Before I get burned and tossed aside I have checked
http://forum.xda-developers.com/showthread.php?t=922324&page=92
http://forum.xda-developers.com/showthread.php?t=883175&highlight=partition&page=103
and about 5 other pages and they all say the same thing..use EASEUS, grab the slide bar and voila. It appears to work but when I install it in the NC it either becomes very unstable or just boots to the NC as if the SD card was not there.
Anyone have any ideas?
Jeep_Lover said:
Hello first I want to say a big THANK YOU to everyone that has put time and effort into making the Nookie what it is today....but I have a noob question.
I recently got a 16gb micro SD and can successfully get the 0.6.8 Nookie to run on my nook color, my problems start when I try to "recover" my other 13gb's. Before I get burned and tossed aside I have checked
http://forum.xda-developers.com/showthread.php?t=922324&page=92
http://forum.xda-developers.com/showthread.php?t=883175&highlight=partition&page=103
and about 5 other pages and they all say the same thing..use EASEUS, grab the slide bar and voila. It appears to work but when I install it in the NC it either becomes very unstable or just boots to the NC as if the SD card was not there.
Anyone have any ideas?
Click to expand...
Click to collapse
I use Lexar Bootit ....a free utility...to format and flip the bit that says its a removeable drive, then your windows pc drive management can see and format it as full capacity fat32.
Hey thanks for the tip, unfortunately it won't work. I forgot to mention that I followed this tutorial ..... and updated my driver (saved my original Windows just in case) to a hitachi driver and now I can switch my SD memory card forth "removable" to "logical" and back when needed. Once I get it as a logical drive I was EASEUS to increase the size of partition 4 (SD Card)..but again no dice!!!
Seeing that I am a noob I can't post the link to the tutorial but I'll say it worked like a charm and when I want to go back to the original I just need to "roll back" the driver.
Well, a couple of things:
Are you using a Sandisk card? Sandisk class 2 and 4 cards have been found much more stable than most others for running a ROM from SD, and problems with SD installs often go back to the card.
Any particular reason you went with Nookie Froyo? It has pretty much fallen out of use since the NC's stock OS was updated to Froyo in May. If you want an SD install, there's a simpler, size-agnostic method for CM7, which is also a more robust and capable OS and a more advanced version of Android (Gingerbread 2.3.4 rather than Froyo 2.2). I would recommend CM7.1 RC1, or if you're adventurous, Nightly 136.
Taosaur said:
Well, a couple of things:
Are you using a Sandisk card? Sandisk class 2 and 4 cards have been found much more stable than most others for running a ROM from SD, and problems with SD installs often go back to the card.
Any particular reason you went with Nookie Froyo? It has pretty much fallen out of use since the NC's stock OS was updated to Froyo in May. If you want an SD install, there's a simpler, size-agnostic method for CM7, which is also a more robust and capable OS and a more advanced version of Android (Gingerbread 2.3.4 rather than Froyo 2.2). I would recommend CM7.1 RC1, or if you're adventurous, Nightly 136.
Click to expand...
Click to collapse
Thanks for the info unfortunately I am using a 16gb PNY, class 4 and at $15 I couldn't pass it up...looks like I should have done some more reading first. Really I have no clue why I am using the Nookie, my wife said said that was the one she wanted. I think she just likes saying "Nookie", but I'll give the CM7 a go and see what trouble I can get into.
thanks again...
Taosaur...I was able to get the CM7 mod up and running in no time flat. Now the wife wants me to see if I can get bluetooth working.
You said "I was able to get the CM7 mod up and running ...." so I assume you got your problem fixed. That's good.
About bluetooth.
1. Turn off Wifi
2. Power off NC
3. Power on NC
4. Turn on bluetooth
5. Turn on wifi
votinh said:
You said "I was able to get the CM7 mod up and running ...." so I assume you got your problem fixed. That's good.
About bluetooth.
1. Turn off Wifi
2. Power off NC
3. Power on NC
4. Turn on bluetooth
5. Turn on wifi
Click to expand...
Click to collapse
Yep, I had to do the above the first time I turned on bluetooth, but haven't had any trouble toggling it on and off since then. Just open notifications (that broken-circle-and-arrow button on the status bar) and you have toggles there for Wifi, bluetooth, and a couple other things.
@ Taosaur,
I've seen your signature indicate you are running nb136, any change or improvement (both slightly and/or significant) over the previous ones?
Jeep_Lover said:
Thanks for the info unfortunately I am using a 16gb PNY, class 4 and at $15 I couldn't pass it up...looks like I should have done some more reading first. Really I have no clue why I am using the Nookie, my wife said said that was the one she wanted. I think she just likes saying "Nookie", but I'll give the CM7 a go and see what trouble I can get into.
thanks again...
Click to expand...
Click to collapse
Damn! My wife never says "nookie".
votinh said:
@ Taosaur,
I've seen your signature indicate you are running nb136, any change or improvement (both slightly and/or significant) over the previous ones?
Click to expand...
Click to collapse
I haven't done much but read and browse a little since I flashed it, but I haven't noticed any difference from 7.1 RC1, which wasn't really any different from Nightly 102 I had before that. I mostly just flashed this time for the integrated OC/Tweaks kernel, without the video/lag problems that were reported in 132-134.
Thanks for an update, m8
maybe someone can help me, i'm about to loose my mind here trying to figure this out. i'm using a Sandisk class 4 16gb card running CM7 with the OC kernal.Did all of this using the size agnostic install method. everything is working fine but i can't for the life of me figure out how to access the rest of the space on my SD, when i insert the sd card into my PC it just shows up as the 115mb partition. i've tried using EASeus, the lexar bootit, and some other partition tool with no luck. with Easeus i select the 13gb FAT32 partition and make it active and thats it right? does it need to be logical? and which partition am i resizing?
Dr. Light said:
maybe someone can help me, i'm about to loose my mind here trying to figure this out. i'm using a Sandisk class 4 16gb card running CM7 with the OC kernal.Did all of this using the size agnostic install method. everything is working fine but i can't for the life of me figure out how to access the rest of the space on my SD, when i insert the sd card into my PC it just shows up as the 115mb partition. i've tried using EASeus, the lexar bootit, and some other partition tool with no luck. with Easeus i select the 13gb FAT32 partition and make it active and thats it right? does it need to be logical? and which partition am i resizing?
Click to expand...
Click to collapse
None of the above. Windows will only recognize the first partition on a SD card, and when you make a SD bootable, that first partition will be the boot partition. To access the larger storage partition, connect your NC with CM7 running to the PC over USB. Open notifications on the NC, tap through "USB connected" to the USB screen, and "Turn on USB storage." Windows will now detect two storage drives, NookColor (the system partition, where apps install) and SDcard (the large storage partition).
The only time you'll want to remove the card from the NC and plug it into your PC is when you want to put on a new cm...zip update file to flash a new ROM.
I used the size agnostic install method with a 16gb PNY calss 4 SD and after all the steps were completed I was showing 13.8gb free for my SD card when I looked at in on the NC. Not believing my eyes I pulled it out and looked at it with EASUS and it showed partition 4 as 13.8gb (utilizing all the cards remaining space). I then downloaded a few things and added a few books for my wife and the space shrank to 13.4gb. As stated above your computer wont show it.
In short have you looked on the NC under "Storage" (I think that is were I found it) and verified you don't have the full capacity already?
Also there is another method I needed to use when I was messing with an earlier version (Nookie) that allowed me to see an SD card as a "Local Device" so windows would let me see all partitions on the hard drive. I can't post a link until I have more posts but email me and I can send you the link if interested.
Taosaur said:
None of the above. Windows will only recognize the first partition on a SD card, and when you make a SD bootable, that first partition will be the boot partition. To access the larger storage partition, connect your NC with CM7 running to the PC over USB. Open notifications on the NC, tap through "USB connected" to the USB screen, and "Turn on USB storage." Windows will now detect two storage drives, NookColor (the system partition, where apps install) and SDcard (the large storage partition).
The only time you'll want to remove the card from the NC and plug it into your PC is when you want to put on a new cm...zip update file to flash a new ROM.
Click to expand...
Click to collapse
thanks, well that got me some where. i connected nook to PC, turn on storage mode and it shows E/F drive. click either one and it says "Please insert disk into removable disk E/F" so then i turn off debugging and the nook color internal memory pops up as drive F, while clicking on drive E gives me the same error as above. any ideas? btw i'm on Windows 7 64bit, do i need any kind of special drivers or anything?
It is because windows will only allow you to manipulate the first partition on an SD card...even if it "sees" the other partition as another card it will not do anything with it. EASEUS will show you all the partitions on the SD.
The only way I got Windows to see all the partitions and do anything with them was to change my driver via the "Hitachi fix" If you google Hitachi driver SD card you will find it. I used this site and even though it is long it did exactly as advertised and now I install this driver when I need to format just the partition of an SD card and then "roll back" the driver when I'm done. It tricks windows into thinking it is a local device instead of removable. www/1src/com\forums\showthread.php?t=133718
change / to .
\ = /
I can't post a link as I'm still a noob...
Jeep_Lover said:
It is because windows will only allow you to manipulate the first partition on an SD card...even if it "sees" the other partition as another card it will not do anything with it. EASEUS will show you all the partitions on the SD.
Click to expand...
Click to collapse
S/he really doesn't need Windows to do anything with those other partitions--I suspect messing with them was where s/he went wrong in the first place.
Dr. Light said:
thanks, well that got me some where. i connected nook to PC, turn on storage mode and it shows E/F drive. click either one and it says "Please insert disk into removable disk E/F" so then i turn off debugging and the nook color internal memory pops up as drive F, while clicking on drive E gives me the same error as above. any ideas? btw i'm on Windows 7 64bit, do i need any kind of special drivers or anything?
Click to expand...
Click to collapse
I suggest you start over, because you probably damaged your install when you were messing with the partitions earlier. I'm also using Win7x64, and no, I didn't need any special drivers. Delete all partitions except "SDcard" in EASEUS, expand that partition to the whole card, then write verygreen's image to the card again and re-install. At that point, you should be able to access storage over USB from CM7 without turning off debugging or taking any other special steps other than "Turn on USB storage."
Taosaur said:
S/he really doesn't need Windows to do anything with those other partitions--I suspect messing with them was where s/he went wrong in the first place.
I suggest you start over, because you probably damaged your install when you were messing with the partitions earlier. I'm also using Win7x64, and no, I didn't need any special drivers. Delete all partitions except "SDcard" in EASEUS, expand that partition to the whole card, then write verygreen's image to the card again and re-install. At that point, you should be able to access storage over USB from CM7 without turning off debugging or taking any other special steps other than "Turn on USB storage."
Click to expand...
Click to collapse
alright i'll give it a shot when i get home from work. is the verygreen image the same one found in the CM7 size agnostic SD thread?
"http://crimea.edu/~green/nook/generic-sdcard-v1.3.img.gz"
and when i delete all partitions except for "SDCARD" do i need to make that partition logical or active or anything?
again thanks for your help.
Dr. Light said:
alright i'll give it a shot when i get home from work. is the verygreen image the same one found in the CM7 size agnostic SD thread?
"http://crimea.edu/~green/nook/generic-sdcard-v1.3.img.gz"
Click to expand...
Click to collapse
Yep, verygreen is the author of that thread and image.
Dr. Light said:
and when i delete all partitions except for "SDCARD" do i need to make that partition logical or active or anything?
Click to expand...
Click to collapse
No, in fact you might be able to write the image without messing around in EASEUS at all--I'm just not sure if WinImage (or whatever) would write to the whole card or just one partition. I know if you tried to format it, Windows would only format the boot partition.
Problem: ClockworkMod not booting from MicroSD card
What I'm trying to do: Dual-boot CyanogenMod 7 with the stock Nook Color with Cyanogen 7 on a MicroSD card, but without rooting the Nook Color.
What I've done so far:
1. Downloaded ClockworkMod 3.2.0.1 from download.clockworkmod.com/recoveries/recovery-clockwork-3.2.0.1-encore.img
2. Downloaded Win32DiskImager from launchpad.net/win32-image-writer/trunk/0.3/+download/win32diskimager-RELEASE-0.3-r27-binary.zip
3. Using Win32DiskImager, flashed ClockworkMod onto the MicroSD card.
4. Ejected MicroSD card.
5. Inserted MicroSD card into Nook Color (which is turned off)
6. Connected Nook Color to PC via USB cable
7. Powered on Nook Color
8. Watched as standard Nook Color boots. Nothing at all displays related to ClockworkMod.
Other troubleshooting thus far
a. I've gone back to step 3, used Windows 7 to just format the SD card to ensure it was blank, and then started with Step 3 again.
b. I've ensured the MicroSD card is set properly into the Nook Color.
c. I've tried holding down the power key on the Nook Color (no effect).
d. Searched these forums via its Search function, and searched via Google (most references use ClockworkMod 3.0.2.8, which a few posts mention does not work on the "blue dot" version of Nook Color.
Misc:
MicroSD card: SanDisk Type-2 4GB
Nook Color (the "blue-dot" version that starts with a 1GB partition for side-loading)
PC: Windows 7 64-bit, built-in SD card reader/writer
Any help or guidance would be greatly appreciated. Thank you.
Ynglaur said:
Problem: ClockworkMod not booting from MicroSD card
What I'm trying to do: Dual-boot CyanogenMod 7 with the stock Nook Color with Cyanogen 7 on a MicroSD card, but without rooting the Nook Color.
--- SNIP ---
Any help or guidance would be greatly appreciated. Thank you.
Click to expand...
Click to collapse
If all you're trying to do is setup a bootable SD card with CM7 on it, and retain the ability to also boot to the stock Nook ROM, try this:
http://forum.xda-developers.com/showthread.php?t=1000957
Based on "What I'm trying to do" and "What I've done so far", you are heading to the completely wrong direction.
A good thing is you had not been able to get into CwM Recovery, otherwise, you made a mess of your NC.
Just stop "what you've done so far" and follow the link that shumash provided above.
shumash said:
If all you're trying to do is setup a bootable SD card with CM7 on it, and retain the ability to also boot to the stock Nook ROM, try this:
http://forum.xda-developers.com/showthread.php?t=1000957
Click to expand...
Click to collapse
Agreed, you don't need clockwork mod for an SD card install. Follow the directions in my signature (adds some details that verygreen leaves out).
Installing image for CM7
I have a nook color that was purchased just a week ago and had 1.4.0 firmware on it. I had updated it to 1.4.1 before noticing that this particular firmware blocked the nook from being hacked. I had read in one of the threads how to revert back to 1.4.0, adding acclaim.zip file to the sd card would do the trick. I tried this and when my nook went to sleep, nothing. I ended up using the nook-complete-restore-1.0.1.zip with a clockworkmod recovery file and followed steps provided in other threads. Then I was stuck at the "n" screen and could not get any further. With an additional 8 Factory resets and doing the complete restore a second time I was able to get back to what I believe is factory. The difference is, out of the box I had 1.4.0 and now I have 1.3.0. I believe this is fine.
I am wanting to put CM7 with google apps on my nook. I have read a thread that suggested putting an agnostic size image file and when used, my 16gb sd card went down to >200 mb. What is a good image file to use for my card or what am I doing wrong? I am using Win32DiskImager to write my images. I have tried generic-sdcard.img for both 1.1 and 1.3 and the above still happens. I loose over 14gb of space.
I have downloaded the following to use once I have figured out what image to use. update-cm-7.1.0-encore-signed.zip for my CM7 and gapps-gb-20110828-signed.zip for my google apps.
Thanks for all the hard work that is put into making our nook experience the best!!!
dhed73 said:
[...] The difference is, out of the box I had 1.4.0 and now I have 1.3.0. I believe this is fine.
Click to expand...
Click to collapse
If you're installing CM anyhow, the version of B&N running is not important, correct.
I am wanting to put CM7 with google apps on my nook. I have read a thread that suggested putting an agnostic size image file and when used, my 16gb sd card went down to >200 mb.
Click to expand...
Click to collapse
Going by that name, you were doing a CM install to SD. If you'd completed that process, it would have made use of the rest of your SD card.
What is a good image file to use for my card or what am I doing wrong?
Click to expand...
Click to collapse
Are you trying to:
1. Root stock (doesn't sound like it)
2. Install CM to SD for dual boot
3. Install CM to eMMC
I have downloaded the following to use once I have figured out what image to use. update-cm-7.1.0-encore-signed.zip for my CM7 and gapps-gb-20110828-signed.zip for my google apps.
Click to expand...
Click to collapse
You might want to check out CM 7.2 RC0 Mirage (search here). It incorporated all of the fixes and some optimizations up through CM n253.
I am wanting to install CM to SD for dual boot. I have completed the process for adding the image to my card. The problem is that, after adding the image I now have 115mb on my 16gb card. If, I go ahead and install to my SD card will the space on the card be opened up or do I have to do something else?
dhed73 said:
I am wanting to install CM to SD for dual boot. I have completed the process for adding the image to my card. The problem is that, after adding the image I now have 115mb on my 16gb card. If, I go ahead and install to my SD card will the space on the card be opened up or do I have to do something else?
Click to expand...
Click to collapse
If you're getting that 115mb number from your PC card reader on Windows, that's misleading because that's just the size of the boot partition. There are other partitions on the card that take up space and are formatted to be used by CM7. Boot into CM7 on the SD card and see how much space you've got on the /sdcard partition. It should be many gb.
To see how the card is partitioned and the sizes in Windows, get Easeus Partition Master. It's free. If the last partition (the 4th) isn't fully allocated, use Easeus to do it. Don't resize any of the other partitions until you really know what you're doing.
shumash said:
If you're getting that 115mb number from your PC card reader on Windows, that's misleading because that's just the size of the boot partition. There are other partitions on the card that take up space and are formatted to be used by CM7. Boot into CM7 on the SD card and see how much space you've got on the /sdcard partition. It should be many gb.
To see how the card is partitioned and the sizes in Windows, get Easeus Partition Master. It's free. If the last partition (the 4th) isn't fully allocated, use Easeus to do it. Don't resize any of the other partitions until you really know what you're doing.
Click to expand...
Click to collapse
I have a issue with downloading cm7 on a sd card ive followed all the steps and boot it and it downloads and restarts and seems to be working but the touch screen isnt working. My nook is version 1.3 any help would be appreciated.
lesdavid said:
I have a issue with downloading cm7 on a sd card ive followed all the steps and boot it and it downloads and restarts and seems to be working but the touch screen isnt working. My nook is version 1.3 any help would be appreciated.
Click to expand...
Click to collapse
I had the same problem when I had to restore my nook color. I ran the program, in my case the nook system restore file, a second time. After I had done this, my touch screen was back working.
---------- Post added at 07:53 PM ---------- Previous post was at 07:48 PM ----------
shumash said:
If you're getting that 115mb number from your PC card reader on Windows, that's misleading because that's just the size of the boot partition. There are other partitions on the card that take up space and are formatted to be used by CM7. Boot into CM7 on the SD card and see how much space you've got on the /sdcard partition. It should be many gb.
To see how the card is partitioned and the sizes in Windows, get Easeus Partition Master. It's free. If the last partition (the 4th) isn't fully allocated, use Easeus to do it. Don't resize any of the other partitions until you really know what you're doing.
Click to expand...
Click to collapse
shumash,
Thanks..... after downloading the easeus partition file I found that you were correct and I had 14gb left over. I had a hard time booting into recovery for the google app file but, it finally happened. I am up and running and want to thank everyone for the help.
gallahad2000 said:
Agreed, you don't need clockwork mod for an SD card install. Follow the directions in my signature (adds some details that verygreen leaves out).
Click to expand...
Click to collapse
Many thanks. The instructions in your signature worked perfectly. Just curious: is there a freeware image-making software app that doesn't expire after 30 days?
Hello.
I bought a refurbished Simple Touch from ebay and I would like to hack it to access my Google account and to install a better PDF reader.
http://lifehacker.com/5889158/turn-a-99-nook-into-a-fully-fledged-android-tablet-in-four-easy-steps didn't open my nook and caused it to get stuck in the loading mode, showing a screen that the nook is loading after I restarted it.
http://forum.xda-developers.com/showthread.php?t=1469281 didn't work for me either. My Nook was stuck again. I didn't restore it using a special program. Instead, I turned it off six times to reset factory settings.
I used these files to hack my Nook:
Win32DiskImager.exe
touchnooter-1-6-24.img
touchnooter-2-1-31.img
I am stuck with two micro SD cards that used to be 4GB and now their apparent size is down to 75 megabytes and I don't know what to do since formatting doesn't solve the problem. What should I do to restore the micro SD cards?
The Nook Model is BNRv300
The Serial Number is 301413017......
Please help me install a hack on my Nook Simple Touch Reader.
Thank you.
Follow the steps in this thread. For your micro sd card use a partition manager to erase the partition and format the disk.
Tarakan5 said:
Hello.
I bought a refurbished Simple Touch from ebay and I would like to hack it to access my Google account and to install a better PDF reader.
http://lifehacker.com/5889158/turn-a-99-nook-into-a-fully-fledged-android-tablet-in-four-easy-steps didn't open my nook and caused it to get stuck in the loading mode, showing a screen that the nook is loading after I restarted it.
http://forum.xda-developers.com/showthread.php?t=1469281 didn't work for me either. My Nook was stuck again. I didn't restore it using a special program. Instead, I turned it off six times to reset factory settings.
I used these files to hack my Nook:
Win32DiskImager.exe
touchnooter-1-6-24.img
touchnooter-2-1-31.img
I am stuck with two micro SD cards that used to be 4GB and now their apparent size is down to 75 megabytes and I don't know what to do since formatting doesn't solve the problem. What should I do to restore the micro SD cards?
The Nook Model is BNRv300
The Serial Number is 301413017......
Please help me install a hack on my Nook Simple Touch Reader.
Thank you.
Click to expand...
Click to collapse
rayhan619 said:
Follow the steps in this thread. For your micro sd card use a partition manager to erase the partition and format the disk.
Click to expand...
Click to collapse
What steps should I follow?
Tarakan5 said:
What steps should I follow?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2040351
rayhan619 said:
http://forum.xda-developers.com/showthread.php?t=2040351
Click to expand...
Click to collapse
I am not sure where are the steps written here. Everything seems to abstract.
The uRamdisk patching is done with scripts rather than copying pre-compiled binaries
Click to expand...
Click to collapse
What does that mean? Where do I get the scripts
Under the hood, this is a minimal linux environment with the nook drivers/binaries and a few core android binaries.
Click to expand...
Click to collapse
Is this one Linux-based?
What kind of partition software do I use to restore my SD cards that lost volume after my attempt to nooter my Nook?
I am sorry to post this but it seems like there is very few information available for someone who wants to have a rooted Nook but is not a complete expert on the subject. I cannot post on the developer forum http://forum.xda-developers.com/showthread.php?t=2040351 and it seems like developers are a little isolated from the users of their work.
What do I write to my Nook? Do I need to take out an internal memory that contains the default Nook software on it?
May I get something user-friendly for a common combination of Windows 7 x64 and a Nook Simple Touch?
Is there a any step-by-step solution that is up to date that I can apply to do this?
Thank you.
same boat
I'm on the same boat, new nook with FW 1.0.1
I used these files to hack my Nook:
Win32DiskImager.exe
touchnooter-2-1-31.img
After reboot it try to load and showing progress dots. And on the third dot screen would flash and do this in a loop
I tried factory reset by holding down buttons and after I reset to factory.same loop flashing.
The scripts are included in NookManager. What the author means is that he doesn't just blindly replace original Nook files with his own, he modifies them programmatically so that even if NookManager is used on a version of the Nook firmware that it wasn't designed for, there's a good chance it'll work (though this is no reason to go without a backup first!)
I'd be surprised if all the rooting approaches didn't use Linux under the cover, as a) it's free to use and distribute b) it's commonly understood by devs and many users and c) Android itself uses a modified Linux kernel and UNIX-like user environment.
As for getting your SD card space back afterwards, Windows makes this harder than it needs to be for no discernible reason. Essentially, you need to delete the partitions, delete the second and resize the first, or wipe the entire card and repartition. I don't tend to use Windows for that sort of thing, so I can't give clear advice. But googling phrases like "repartition memory card" seems to throw up useful-looking stuff. It all seems to vary from Windows version to Windows version, though. And the .inf file that is associated with each particular brand of memory card and memory stick.
Just a little tip for getting the SD card back to normal (Windows) is to use the Raspbmc installer. Once you have downloaded it just open it and click on the "Restore device for formatting" button and that will sort it out.
http://download.raspbmc.com/downloads/bin/installers/raspbmc-win32.zip
cowbutt said:
The scripts are included in NookManager. What the author means is that he doesn't just blindly replace original Nook files with his own, he modifies them programmatically so that even if NookManager is used on a version of the Nook firmware that it wasn't designed for, there's a good chance it'll work (though this is no reason to go without a backup first!)
I'd be surprised if all the rooting approaches didn't use Linux under the cover, as a) it's free to use and distribute b) it's commonly understood by devs and many users and c) Android itself uses a modified Linux kernel and UNIX-like user environment.
As for getting your SD card space back afterwards, Windows makes this harder than it needs to be for no discernible reason. Essentially, you need to delete the partitions, delete the second and resize the first, or wipe the entire card and repartition. I don't tend to use Windows for that sort of thing, so I can't give clear advice. But googling phrases like "repartition memory card" seems to throw up useful-looking stuff. It all seems to vary from Windows version to Windows version, though. And the .inf file that is associated with each particular brand of memory card and memory stick.
Click to expand...
Click to collapse
I have done some programming in my time, but Linux is not something I want to deal with. There is no way I can edit a program that is already compiled.
What are the steps that I need to follow to get NookManager to work?
Folks, if you are trying to teach the masses for free, how to hack their Nooks then please do it so masses would understand, not a small number of people who are obsessed with Linux.
Just a little tip for getting the SD card back to normal (Windows) is to use the Raspbmc installer. Once you have downloaded it just open it and click on the "Restore device for formatting" button and that will sort it out.
download.raspbmc.com/download...pbmc-win32.zip
Click to expand...
Click to collapse
Thank you.
The NookManager instructions aren't as apparent as one might like but they are there at the bottom of the first post on the NookManager thread referenced above:
The download must be unzipped and the NookManager.img file must be written to an empty SD card. On windows, you can use disk imager. Linux and mac users can use dd.
To run, shut down your nook, install the SD card and power on. You should see the NookManager boot screen followed within 15 seconds by the welcome screen.
Click to expand...
Click to collapse
Once booted into NookManager just take a look at the menu items - they are pretty self explanatory. Make a backup first then root.
Tarakan5 said:
I have done some programming in my time, but Linux is not something I want to deal with. There is no way I can edit a program that is already compiled.
Click to expand...
Click to collapse
Why do you think you need to edit anything? You don't see a Linux or UNIX command line at all during the rooting process.
umanuel after
cowbutt said:
Why do you think you need to edit anything? You don't see a Linux or UNIX command line at all during the rooting process.
Click to expand...
Click to collapse
Where? Nook? I don't know how to get to the rooting process.
Tarakan5 said:
Where? Nook? I don't know how to get to the rooting process.
Click to expand...
Click to collapse
straygecko pointed out the installation instructions from the original post above. You can prepare your NookManager memory card from Windows (or Mac or Linux). So no Linux required there either.
straygecko said:
The NookManager instructions aren't as apparent as one might like but they are there at the bottom of the first post on the NookManager thread referenced above:
Once booted into NookManager just take a look at the menu items - they are pretty self explanatory. Make a backup first then root.
Click to expand...
Click to collapse
How would I backup by Nook?
Tarakan5 said:
How would I backup by Nook?
Click to expand...
Click to collapse
Its one of the NookManager menus. Its really all very simple so I suggest you make your NookManager SD card, boot it up and look through the menus before asking more questions.
rayhan619 said:
http://forum.xda-developers.com/showthread.php?t=2040351
Click to expand...
Click to collapse
Alright, finally got a chance to do follow instructions, Thanks so much
I'll have to admit i panicked with what stuff Tarakan5 was posting but it is really that simple.
Download any free partition software for XP and delete partition on SD card to leave just one partition,. reformat with SDFormater
Extract image file to PC, and use Win32DiskImager as before.
Voala, it boots to NookManager with a nice menu,
Select option for factory reset.
Nook back ALIVE.
Get latest firmware from B&N
Upgrade from 1.0.1 to 1.2.1
Stick SD card again to boot into Nookmanager again
Select backup (Wait 20 mins)
Boot again and select Root
And I think I'm rooted now.
Thanks
Just gotta find out how to use the rooted nook.
wild03 said:
Alright, finally got a chance to do follow instructions, Thanks so much
I'll have to admit i panicked with what stuff Tarakan5 was posting but it is really that simple.
Download any free partition software for XP and delete partition on SD card to leave just one partition,. reformat with SDFormater
Extract image file to PC, and use Win32DiskImager as before.
Voala, it boots to NookManager with a nice menu,
Select option for factory reset.
Nook back ALIVE.
Get latest firmware from B&N
Upgrade from 1.0.1 to 1.2.1
Stick SD card again to boot into Nookmanager again
Select backup (Wait 20 mins)
Boot again and select Root
And I think I'm rooted now.
Thanks
Just gotta find out how to use the rooted nook.
Click to expand...
Click to collapse
I finally figured it out. I installed Nook Manager and it worked.
Is there any way I can browse internet with my Nook on any basic level? I want to be able to see an online dictionary.
Is it possible to disable automatic updates on the Nook? I really don't want to hear from the Barns and Noble capitalists ever again. I have my own books on it and that stupid update that cannot install (for known reasons) interrupts my reading.
Thank you.
Tarakan5 said:
...
Is there any way I can browse internet with my Nook on any basic level? I want to be able to see an online dictionary.
Thank you.
Click to expand...
Click to collapse
FWIW I use Opera Mobile browser on my NST.
digixmax said:
FWIW I use Opera Mobile browser on my NST.
Click to expand...
Click to collapse
It can be installed on to Nook Simple Touch?
Tarakan5 said:
It can be installed on to Nook Simple Touch?
Click to expand...
Click to collapse
Yes (NST = Nook Simple Touch)_
Sent from my NookTablet using XDA Premium HD app
I want to root my NST but I'm afraid of bricking it.
I did a search and found this thread: http://forum.xda-developers.com/showthread.php?t=1188595 but there's conflicting evidence as to whether resotration on bricking is possible.
How common is bricking the NST and how easy is it to restore it if rooting fails?
Use nook manager and first backup your nook as an image file to your PC or using your SD card (note you will need a big enough sd card for the backup most people have at least 1gig )
rootings pretty straightforward with nook manager just follow the ON screen instructions
your nook like most androids have a recovery built in an can be activated to restore your nook to its factory state
Just make sure you have a good backup before you get started and its a safe process. Backup with NookManager first and check that the backup is complete. Read through the NookManager thread on how the get the backup off your SD card and how to check if its a good, complete backup. Then you will always be able to restore back to before you rooted so root away.
kmaximax said:
Use nook manager and first backup your nook as an image file to your PC or using your SD card (note you will need a big enough sd card for the backup most people have at least 1gig )
rootings pretty straightforward with nook manager just follow the ON screen instructions
your nook like most androids have a recovery built in an can be activated to restore your nook to its factory state
Click to expand...
Click to collapse
Alright I feel reassured.
I found the NookManager thread, it's this one right? http://forum.xda-developers.com/showthread.php?t=2040351
I guess if I follow all the intructions I'll have nothing to worry about.
cairnarvon said:
Alright I feel reassured.
I found the NookManager thread, it's this one right? http://forum.xda-developers.com/showthread.php?t=2040351
Click to expand...
Click to collapse
Yes, that's it. You'll also want the NTGAppsAttack thread from the same forum as well.
I guess if I follow all the intructions I'll have nothing to worry about.
Click to expand...
Click to collapse
It's pretty hard to mess up if you follow the instructions. A few notes from my experience -
Timing is critical after enabling WiFi on a rooted Nook; install something quickly through Google Market, or you'll need to uninstall the automatic update to it before it'll work.
When I restored my Nook back to (registered) stock via Nook Manager in order to update from 1.2.0 to 1.2.1, the B&N registration process complained (presumably because the same device had been re-registered whilst rooted, because I was fiddling). It rebooted and worked the next time.
A backup will be theoretically upto 2GB, if the Nook is full (e.g. of purchased B&N ebooks), but mine were about 200-odd MB (NookManager zero's unused space and compresses the backup with gzip).
cowbutt said:
A backup will be theoretically upto 2GB, if the Nook is full (e.g. of purchased B&N ebooks), but mine were about 200-odd MB (NookManager zero's unused space and compresses the backup with gzip).
Click to expand...
Click to collapse
You can validate the backup is complete by opening it with a zip / archiver program like 7-Zip and verifying the uncompressed size is 2 GB+/- (mine shows 1,962,934,272). That gives you two confirmations - the backup is a valid gz file and all the partitions got backed up.
Hmm this is weird.
Having wrote the image of NookManager to my micro SD card, the nook doesn't want to boot with it in it....
If I remove the SD card it boots just fine. If I put in the SD card when it's on it recognises it too.
Have you ever heard of something like this happening?
I'm on 1.2.1.
How did you write the image to the card?
abern isdsdsdsd
Straygecko, I used Win32DiskImager.
cairnarvon said:
Straygecko, I used Win32DiskImager.
Click to expand...
Click to collapse
Did you turn your Nook off completely (i.e. by pushing and holding the power button on the back for about 30s) before inserting the SD card, then turn it on with the SD card inserted?
What class is the SD card? Do you have a Class 6 (or slower) card you can use?
cowbutt said:
Did you turn your Nook off completely (i.e. by pushing and holding the power button on the back for about 30s) before inserting the SD card, then turn it on with the SD card inserted?
Click to expand...
Click to collapse
Yes.
cowbutt said:
What class is the SD card? Do you have a Class 6 (or slower) card you can use?
Click to expand...
Click to collapse
I can't post a link to it I'm afraid and the packaging doesn't say anything about class.
cairnarvon said:
Straygecko, I used Win32DiskImager.
Click to expand...
Click to collapse
OK, you say if you boot the device and put the SD card it recognizes it. Try plugging it into you PC card reader or plug your NST into your PC and verify that the NookManager files appear on the SD card. You should see the folders custom, files, hooks, menu and scripts on the card and files like boot.scr, uImage and uRamdisk and some others.
cairnarvon said:
I can't post a link to it I'm afraid and the packaging doesn't say anything about class.
Click to expand...
Click to collapse
The packaging and the card itself almost always have the class symbol on them. See the SD association speed class page for examples of the symbols.
straygecko said:
You should see the folders custom, files, hooks, menu and scripts on the card and files like boot.scr, uImage and uRamdisk and some others.
Click to expand...
Click to collapse
Yup those are all there.
straygecko said:
The packaging and the card itself almost always have the class symbol on them. See the SD association speed class page for examples of the symbols.
Click to expand...
Click to collapse
Ok I checked the micro SD and it looks like it's a class 10...Is this the reason it didn't work?
cairnarvon said:
Ok I checked the micro SD and it looks like it's a class 10...Is this the reason it didn't work?
Click to expand...
Click to collapse
Most likely. There have been quite a few reports of problems using class 10 cards.
straygecko said:
Most likely. There have been quite a few reports of problems using class 10 cards.
Click to expand...
Click to collapse
From a PM from cairnarvon, I suspect that his SD card is a counterfeit 64GB device. Unlucky!
I managed to make a backup through nook manager.
it is a ~350 MB .gz file.
The uncompressed version is roughly 2GB. So far so good.
I tried to extract the archive and this happens:
Code:
$ gunzip -d backup.full.gz
gzip: backup.full.gz: invalid compressed data--crc error
gzip: backup.full.gz: invalid compressed data--length error
I tried to search the forum and I found these threads
Not sure if they're relavant though...
cairnarvon said:
I managed to make a backup through nook manager.
it is a ~350 MB .gz file.
The uncompressed version is roughly 2GB. So far so good.
I tried to extract the archive and this happens:
Code:
$ gunzip -d backup.full.gz
gzip: backup.full.gz: invalid compressed data--crc error
gzip: backup.full.gz: invalid compressed data--length error
I tried to search the forum and I found these threads
Not sure if they're relavant though...
Click to expand...
Click to collapse
Is this that same wonky SD card?
Where are you reading backup.full.gz from with gunzip? The SD card via USB Mass Storage mode of the Nook, the SD card via a card reader, or a local copy after previously copying it?
How does the md5 checksum compare with the .md5 file NookManager created?
cowbutt said:
Is this that same wonky SD card?
Where are you reading backup.full.gz from with gunzip? The SD card via USB Mass Storage mode of the Nook, the SD card via a card reader, or a local copy after previously copying it?
Click to expand...
Click to collapse
No I bought an authentic one, it has a logo and everything
I copied the file to my local machine and tried to extract it.
cowbutt said:
How does the md5 checksum compare with the .md5 file NookManager created?
Click to expand...
Click to collapse
I'm not too sure what this means...I know there's a md5 file with the backup but that's about it.
I formatted the partition and tried the backup again but got the same error...
Is backup entirely necessary? Are there any stock backup images on the forum that I could download and use?
cairnarvon said:
No I bought an authentic one, it has a logo and everything
I copied the file to my local machine and tried to extract it.
Click to expand...
Click to collapse
OK, what OS? How did you copy the files?
I'm not too sure what this means...I know there's a md5 file with the backup but that's about it.
I formatted the partition and tried the backup again but got the same error...
Click to expand...
Click to collapse
just run md5sum on the backup.full.gz. Its output should match the contents of backup.full.gz.md5 (which NookManager generated after completing its backup).
---------- Post added at 07:37 AM ---------- Previous post was at 07:35 AM ----------
cairnarvon said:
Is backup entirely necessary?
Click to expand...
Click to collapse
I'm of the opinion that it is. With a backup you can always restore it to factory-fresh. The backup also includes some unique details, like the serial number and, I believe, some decryption keys.