I thought I should share this with everyone in case it helps someone out there. I might have gotten lucky, so YMMV.
Basically like everyone else my SGS (I9000M from Bell) died due to an internal SD error, but in my case I haven't updated the phone since I got it in September 2010 (it had the JG9 firmware). The good thing is I was able to flash it to the stock Froyo 2.2, and I'm currently using it as normal and can access the internal SD without problems.
Summary of steps that most likely fixed the problem:
Go into recovery mode and "wipe data/factory reset". If your phone boots (but still have problems accessing the SD card) then it's a good indication that you maybe able to fix it.
Flash JL2 (from samfirmware.com) using ODIN. Not sure if this is needed, but you may need to ask ODIN to Re-partition. You still get an error "Can't mount DBDATA", and the phone won't boot. That's ok.
Flash the SpeedMod Kernel using ODIN (I used SpeedMod K12J with HZ=256). Your phone should boot into JL2 and the SD card should be accessible again.
At this point your internal SD card is fixed and you should be able to flash whatever you want. Just note that Kies will sometimes not work properly with the SpeedMod installed. In my case I flashed 2.1 (JH2) again (this won't work if you have 2.2 without speedmod kernel), then used Kies to update to 2.2 (JL2).
For those who are interested in the details, please read on.
Bought the phone in September, it's a Samsung Galaxy S I9000M from Bell. It says 10.07 on the back of the phone, and it had the JG9 firmware on it.
Since the 2.2 update came out I've been following closely the problem of the internal SD failures and the grief it's causing to a lot of people. So I decided to hold off updating until Samsung gets their act together. (I know it's better to update as soon as possible in case it dies so that I can use the warranty, but I had 9 months remaining so I decided to wait a little more.)
Close to the end of 2010 I noticed that my Android Market has changed, and that it now allows me to "Update All", so I just hit that and noticed that after updating several apps, all the remaining updates failed. I knew this wasn't a good sign. My SD card was still fine though.
After the above incident the phone felt a bit sluggish and less responsive than it used to be. I hadn't correlated this to anything yet, but now I know it was most probably due to the internal SD on its way to die.
On January 7 the phone suddenly died. When I rebooted it, I got the infamous symptom of seeing the S logo animation then black screen, then if I touch the two buttons at the bottom they light up indefinitely. At that point I knew it was the internal SD card.
I put the phone into recovery mode and confirmed my guess when I saw the red error message "Can't mount SDCARD".
I took the phone to the Bell store, the guy told me Bell now has an expedited shipping process for this problem and gave me a number to call to get a new replacement phone.
I called the number and they verified the symptoms with me, and said they're going to send me a new phone. I asked for the $100 credit but I was told I can't get it since I didn't update to 2.2. Apparently they only give you the credit if you actually tried to update and the update caused the phone to die (which doesn't make any sense to me).
So, while waiting for the new phone to arrive, I decided to try a few things. Here's what I did:
First thing I did was going into recovery mode and doing a "wipe data/factory reset". To my surprise, the phone actually booted after I did that, but I got force closes on almost all apps, and when I checked the internal SD card it wasn't mounted at all. The phone response was extremely slow and barely usable. I was able to make phone calls though.
I wondered if the SD problem is a corrupt partition rather than a physical error. After searching for a while I found someone posted a solution to fix a problem with his internal SD card by using the "parted" tool to mkfs the partition. Unfortunately I couldn't copy the tool using adb; my phone wasn't rooted and I couldn't access the SD card, so there was no place to copy the binary to. I get either a read-only error when trying to copy to the root, or a permission denied error when trying to copy to other mounted partitions.
Then I figured if I could flash 2.2 somehow (even if it doesn't work) I can try to ask Bell for the $100 credit Kies was useless as it couldn't recognize the phone, so I grabbed the stock JL2 firmware from samfirmware.com and used ODIN 1.7 to flash it. I asked it to Re-partition (not sure if this was needed). After reboot I saw another red error message, but this time it was complaining "Can't mount DBDATA" (as opposed to SDCARD). Then all reboots after that resulted in the same problem (S logo then black screen).
I searched for the "Can't mount DBDATA" error and found a post on xda that shows a method that should fix this by first using a 512 PIT file to repartition (no ROM involved), then flashing a stock firmware. I did that but it didn't help.
Then I found a site called "AKA skriller" that shows a way to reflash a stock firmware after the phone is bricked. So I followed the instructions by flashing a "nobrick" image (apparently made by someone called eugene), and then flashing a stock firmware. I flashed nobrick then JH2 in attempt to go back to 2.1. After doing this the phone went into a boot loop where it keeps showing the I9000M screen then rebooting. At that point I couldn't go into recovery mode, but I could go into download mode.
After searching again I found out that this was due to a new bootloader in 2.2 that prevents going back to a 2.1 firmware. I wanted to stop the boot loop so I flashed JL2 again, which stopped the boot loop but still the phone won't boot (black screen).
After more searching I found that I could go back to a 2.1 firmware only if I flash a custom kernel, someone suggesting the SpeedMod kernel (not sure if it has to be SpeedMod or any other kernel). So I flashed SpeedMod (I used SpeedMod K12J with HZ=256) using ODIN 1.52. First thing I got is a custom recovery menu with more options, I just skipped it and rebooted. THE PHONE ACTUALLY BOOTED this time into 2.2. Not only that, but the SDCARD problem was FIXED, and the phone was responsive and fast again.
I wanted to load my contacts again using Kies from a backup I made earlier. Kies recognized the phone but for some reason the contacts widget keep saying "please connect your phone" and I couldn't copy back my contacts.
I thought this might be due to the custom kernel and I was right. I flashed a stock 2.1 (JH2) with a bootloader included using ODIN. It just worked. I could copy my contacts again back to the phone.
I was also able to update to 2.2 (JL2) again using Kies this time, and it even kept my contacts. This is what I have now on the phone.
P.S. I can't post external links due to a restriction by the forum (since I'm new).
I had my doubts when I opened this thread... I've gone through 5 phones already and just finished killing my sixth...
I had tried flashing JL2 stock after killing it through the usual process (transferring over my music collection)... and got the EXACT same errors you wrote about.
What I didn't try was then flashing the custom kernel... so I tried that...
and it was too good to believe... didn't work for me. after the boot animation, display goes blank and buttons off... you can tell it's not going to work if it starts vibrating during boot.
I'm sorry it didn't work for you. As I said I might have been lucky.
Although that I just found another thread on androidforums where the guy managed to fix his sd card in a very similar way to what I described*. I actually haven't seen his post before I fixed my card, so it was independent.
Here are the commonalities between what I did and what he did:
* We both flashed a 2.2 firmware with a PIT file and Re-partition (using ODIN)
* We both got the black screen afterwards
* We both then flashed a custom kernel with no Re-partition
* We both got recovery menu right after flashing the kernel
* We both ended up in Android 2.2 aftwerwards with the SD card fixed
Here are the differences between us:
* I used JL2 firmware while he used JPM
* I used a 512 PIT while he used an 803 PIT (that's just what samfirmware.com said to use for each firmware)
* I flashed the firmware using ODIN 1.7 while he used ODIN 1.3
* I used the SpeedMod kernel while he used the YAOK kernel. He flashed using ODIN 1.3 while I flashed using ODIN 1.52.
* Once in the recovery menu I rebooted right away into 2.2, while he "ended up selecting every option that had something to do with mounting, formating, erasing. Anything to do and sounding to do with the SD card [he] pressed." then rebooted successfully with no SD card errors.
(*)http: //androidforums.com/samsung-galaxy-s/235987-clueless.html
what slaman encountered was REAL hardware failure, like I did
what you encountered was just a Corrupt SD card, which can be fixed all the time, using the process you described, and many other methods.
Real hardware failure, even if you manage to boot into the OS, it will show no internal SD, or 0 available space, or simply an error message complaining about the internal SD
You can only see that with custom ROMs, with a stock ROM you wont even get past the black and white SGS logo screen
internal SD card
Hi,
I have followed a few discussions on this board as also my internal and external SD card was "gone". I couldn't access or mount it any more after flashing with Odin to european JPY 2.2.1 ... and I found out where at least my internal memory has gone.
In fact the internal memory couldn't be accessed after installing an exchange email account. My OWA account requires security like password protection and NO external SD card.... but it seems that version 2.2.1 does not make a difference between internal and external SD card and removes the access to both away. It looks like disappeared but it comes back after uninstalling your exchange email account.
May be this is all known and logic but I couldn't find the explanation to it therefore I would like to post the information.
Thanks
Thank you very much for this! I indeed had the mpbk01 (whatever) error, and did exactly what was posted above (using 512 pit, and 1.7 odin) and now have my pone working just fine.
Again, thanks a lot for the post!
Edit: While all this is true.. seems like i have 0.00b of internal phone storage available, so I cannot install any apps. The internal SD card space is reporting normal at 13.03gb though.
Glad it worked for you. Hope you can solve the internal phone storage problem though.
As I mentioned I might have been lucky, I don't expect everyone to be able to fix the internal SD card problem by just flashing custom roms/kernels. If it works for a few people then I'm happy I saved them the hassle of going through Bell to replace the phone.
just a suggestion to send it out for repair, before you run out of warranty
Uss_Defiant said:
Thank you very much for this! I indeed had the mpbk01 (whatever) error, and did exactly what was posted above (using 512 pit, and 1.7 odin) and now have my pone working just fine.
Again, thanks a lot for the post!
Edit: While all this is true.. seems like i have 0.00b of internal phone storage available, so I cannot install any apps. The internal SD card space is reporting normal at 13.03gb though.
Click to expand...
Click to collapse
uys I have a very serious problem. I'm on Darkkys latest rom...
I took out my battery for 1 hour... put battery back in and the phone did not boot up.
All I got was the screen saver and the phone kept on virbarting...
I tried wiping cache through clock work recovery, resetting to factory settings via clock work.. still nothing..
I just updated phone via odin to latest JPY...the phone goes to black screen and keeps vibrating... It won't boot.
Guys what's wrong with my phone? I am really worried...and I need to use it
I appreciate your help.
Ps. Phone can go into download mode..
Edit: XWJM8 worked
jUsT2eXy said:
uys I have a very serious problem. I'm on Darkkys latest rom...
I took out my battery for 1 hour... put battery back in and the phone did not boot up.
All I got was the screen saver and the phone kept on virbarting...
I tried wiping cache through clock work recovery, resetting to factory settings via clock work.. still nothing..
I just updated phone via odin to latest JPY...the phone goes to black screen and keeps vibrating... It won't boot.
Guys what's wrong with my phone? I am really worried...and I need to use it
I appreciate your help.
Ps. Phone can go into download mode..
Edit: XWJM8 worked
Click to expand...
Click to collapse
well I have this problem and cant get it sorted at all, it seems to have also created another partion and i have no idea how to wipe the sd card clear of all partions so it can recreate them!!!!
please help !!!
Hii there,
this thread seems to be very helpful, so I want to value your help with something in return. if any of you can get me out of this mess I will donate you appropriately so that you can constantly offer this helps to others too.
some details are as follow:
1. my Galaxy S (korean) M110s was on USB downloading Market update when I disconnected it abruptly to make a call. It was downloading some updates then.
2. moment than its showing SD card damage error and even showing 00 for external SD card which I inserted post that.
3. this means neither internal nor external SD card are being detected. Though it shows that ext SD card is mounted when I insert in and also let me unmoutn it.
BTW I have tried flashiing using odin and eclair 2.1 version which didnt help much.
Need urgent help
usb jig only gets me into download mode. and not recovery mode
so can Odin still get it to work while in download mode instead
It worked for me but I can't access the internal memory nor the external one. Hence, I can't use the camera or install any app. I don't have any kind of warranty so I believe this is the best I can get, right?! At least I can use as a phone and browse the internet!
Thanks for your help, even though it worked half-way for me!
http://forum.xda-developers.com/showthread.php?t=1020278
Please take a look of this thread:
http://forum.xda-developers.com/showthread.php?t=1188482
It may fix your internal sd card problem permanently.
okay so after trying some other options i was able to solve this problem, here is the how to in case this has happened to anyone else. my original post is below the how to.
1.flash the sbf that returns your defy to stock eclair using a different T-Mobile sim, after it is done flashing you will seem to still have the problem, except it will say no sim emergency calls only.
2.power off the device and install your original sim from T-mobile.
3.reboot the device and you will not be prompted to setup motoblur, because you device is in soft brick limbo still, but you will have laggy touch responses, be patient with your device as you navigate to settings>privacy>factory reset and confirm. ( this process will take much longer than usual and the progress bar will not show any progress but it will shutdown and reboot as it normally would with a factory reset)
4. you will now be prompted to setup your motoblur account ( if you are not restart the steps until this happens, if it does not happen your device did not actually do a factory reset you will need to try again until it does ask you to setup blur, this is your sign from the moto gods that your device is no longer in softbrick limbo)
5. setup your blur account ( you will still have no recovery menu at this time so don't try and check or you will have to start back over at step one)
6. now navigate to settings>about phone> check for updates
7.download and install the update to froyo ( durring downloading you phone may shut off several times, however if you reboot it will automatically pick up the update where it left off as if your device never powered off to begin with)
8. once you have installed the update you device will be back to froyo stock and your recovery partition will no longer be bricked
9. enjoy your defy once again, and be more careful with your device in future ROOT mods and tweaks, cheers!
10. If this helped you recover your device please thank me for this solution.
okay so i am new to posting on XDA and i will try to organize my problem as best as possible, but i may need much guidance on if i am posting in the proper forum.
here are my details of my device and the problems i am facing with my device currently.
Motorola Defy
MB525
T-mobile US
stock Froyo rom 2.2.1 ROOTED overclocked with milestone overclock to 1224 mhz @ 85% voltage /V6 SUPERCHARGER SCRIPTS. MODDED BUILD.PROP TO REFLECT THE MAX HSUPA CATEGORY 34/MAX HSDPA CATEGORY 36/ GPRS CLASS 10/ HSXPA=2/RO.RIL.VIDEO_MODES=TRUE EVERYTHING ELSE IN BUILD.PROP WAS STOCK EXCEPT WHAT THE V6 SUPERCHARGER SCRIPTS CHANGES. I was running a custom bootscreen that i placed in the location of the old one using ES file explorer with root browsing rights, i had defy Recovery installed but only used it basically as a system restore app ( context of previous statement is relating to system restore if you were talking about a windows machine) used Avast anti virus as root installation w/antitheft installed used system tuner to manage startups down to core services or other services i did want to run at boot i.e. stuff like facebook and weather channel.
DEVICE WAS ALSO SUBSIDY UNLOCKED
SBF started with and reflashed to try to correct problems was JORDN_U3_6.36.0_SIGNED_USAJRDNTMOB1B4B5DE1028.OR_JORDANTMO_PO22_HWp3_SERVICE1FF.sbf
****NOW TO THE PROBLEMS****
I was starting to think that maybe the v6 supercharger scripts were not really doing anything performance wise for me as it would disable my overclock settings at boot and i would have to manually invoke them after everything had requested its SU rights at boot. so i decided to get rid of the v6 supercharger scripts and all other softwares pertaining to managing and running the scripts, I decided the best way to do this was to do as i had always done in the past when wanting to re-tweak my phone and use the stock recovery to start fresh with 0 tweaks and only apply the ones i wanted after restoring to stock, when i used the stock recovery this time it didn't work, i booted the phone back up after wiping data/ factory data reset and to my surprise the recovery did nothing but delete the SU.apk the custom boot was still in tact, everything else listed above still in tact except for the phone was obviously throwing errors left and right because there was no SU for apps to request permissions from, so i reinstalled the SU.apk just to make sure i didn't have to deal with the device being slow while restarting the process of doing a full wipe. this time i used the DefySDrecovery.apk i mentioned above to do the same steps and while adding wiping the dalvik cache after wiping data and before invoking the recovery, it then gave me the same error i have always gotten when wiping the cache which is
e:\ cant mount cache partition
e:\ cant find /recovery/caller
e:\ cant find/recovery/cache
(this has never caused problems with the device once recovery was finished)
this time however I was only able to boot(loop) to the moto logo
so i reflashed The above mentioned SBF and the device booted normally i went through the entire setup like it was a new device with blur and google and it finished. when I got to the home screen it was frozen and would not respond to touch it also showed to have no cellular signal, i turned it of and back on and it made me go through blur and gmail setup again, went to home screen same thing frozen with no signal.
i reflashed the SBF again thinking maybe something went wrong as they do sometimes with RSD yet still finished and passed on everything
the above description repeated except for this time it responded to touch for the first few seconds before it froze completely ( oops! sorry one detail to add when i say it froze i mean froze like would respond to nothing, touch, hardware buttons, nothing) i had to pull the battery in both instances to try and start over, after many attempts of getting in the phone and trying to turn on usb debugging before it froze i finally was able to complete the finger olympics and get usb debugging turned on, i was able to root it using superoneclick so that i could have a look at the logcat in ADB. now in my experiences with ADB normally when you run a logcat command it will print to the screen for about two to three hundred lines and then slow down and only print one to six lines at a time as the server is calling actions when i ran a logcat on this device it runs two to three hundred lines slows down and then runs lines until you close the ADB window i let it run a logcat overnight and it was still running lines the next morning with no sign of stopping where you could freeze the window and read over all the crap it was calling to action, looking at the device durring this process i saw force close windows a few times saying the com.android.process has stopped but the home screen never crashed and the phone didn't do a random reboot. so to sum it all up ( so sorry for the lengthy explaination but i wanted you to have the whole problem fully explained in hopes you wouldn't have to ask for more detail)
it freezes and has no service with my T-mobile sim in it ( if i put my at&t sim in it has service but still freezes)
flashing a new SBF doesn't fix the problem as it should
and there is no way to enter the Recovery Menu now its gone, non existant, cant find it, cant fix it, i'm F***** right now Please help if you know how, and if i totally screwed the phone i'm cool with you saying so but it can still be in a respectful way i already feel like an idiot for not being able to correct this with all the knowledge i have of this phone, a negative attitude insinuated is not going to help me in either direction, thanks in advance for any help you may be able to provide.
Hi All,
Please HELP.
I was a complete noob to rooting until I started this but spurred on by successfully rooting and overclocking / undervolting my defy I thought I would try to install Gingerbread so I can use the stupid stupid sky+ app which no longer supports 2.2.2.
Its all gone horribly wrong and I still dont know why as I checked and rechecked the prep but S..t happens so they say.
I have pretty much given up on this and will buy a new phone tomorrow if I cant sort today but would like to ask everyone that has more knowledge than myself on this subject (which doesn't narrow the field much!) if they have any ideas.
Well where do I start, I bricked my defy.
Apart from when I flash shadows rom (see below) I have only black screen, white led on usb connection, no recovery boot. phone is visible to rsd lite but nothing else. This happened after I lost sd card availability after reset / wipe trying to install a fixed gingerbread rom using RSD lite.
I could not flash back to froyo and every other recovery sbf i tried wouldn't work until I found an old sbf from shadow which actually booted up! YESS!! but then Nooo!. phone screen looks very nice - not sure what version it is but assume ICS (its got spareparts folder which I`ve not seen before) - and works as alarm clock and web browser but no phone function at all - no signal, no call or end call buttons - just not there! this (http://forum.xda-developers.com/showpost.php?p=14762402&postcount=143) is the link where I found shadows version, couldn't wipe in between each step so just flashed 3 files in turn using rsd lite and it seemed to work - phone booted up after 3rd sbf was flashed. The rom is set up for developers and has some developing tools included acr, api demo,dev tools, hstcmd & redlinecap
Main problems:-
The rom is a tmobile version and I`m on vodaphone so maybe this is why there's no phone service but I wasn't prompted for an unlock code so assume its not locked.
The 2nd boot recovery no longer works even after reroot and reinstall (see below). I can surf the web very well via wifi - much quicker than before but downloads dont seem to work but only tried shortfuse.org and that site is apparently down atm and anything that requires google wont work as Gapps got deleted. I cant install GAPPS without boot menu.
recovery from main boot menu is unavailable and zip from sd just reboots.
I also cant connect my phone to my pc via usb and have the sd card available at the same time, as soon as the USB is connected the sd card is not available to the phone, I can see it on the pc and can read / write / delete from the pc - (usb debugging is disabled). when I access the sd card via file manager on phone (with usb disconnected) I can install some programmes that I have transferred from my pc; 2ndinit installed and said 2nd init installed ok again (after re-rooting) but still no blue led on reboot.
I've since tried everything I can think of or search for - After loosing the sd card availability I copied card contents to pc and reformatted sd card on pc. copied back the files immediately before flash attempt to sd as well as the rooted froyo backup I had and nothing changes. I have a titanium backup on the card but have so far been unable to install titanium again to try and restore it. no play acces as no gapps and when I try to access via pc and send it to phone it says installed but its not on the phone. every other file on the sd card results in error parsing file or file type not supported.
BTW when I say originally that I lost sd card availability I have now realised that it was the problem with having the usb installed at the same time which caused it and if I had unplugged it may have worked but still dont understand where this problem came from but I did have usb debugging turned on at the time.
I have scoured these holy pages for 2 whole days and tried several fixes which have probably really messed up everything even more but nothing has changed with the usability (or not) of the phone. A lot of the old links found were dead or taken over by a fake install of filemanager that my antivirus caught was a trojan. Due to this I may have missed an avenue or 2 but think I`ve tried everything I can.
At this stage I do not know exactly what I`ve tried as the list is endless but it includes reflashing the green lense kernel, attempting to reflash the original rom and any other recovery, fixed or stock roms I have found which don't specifically say only for defy+ and the only rom that allows the phone to boot is shadows above and that has no functionality.
I would love to install the latest cm10 build but cant get into the 2ndinit menue so unless someone knows away to flash it using RSD lite I`m stuck.
I do not even know if the cm10 would work as I`ve probably messed up the kernel and the original rom so the 2nd init may not get a look in.
Any help would be greatly appreciated. You'll find me under the stairs mumbling to myself and probably dribbling a bit - my wife thinks I`ve gone mad and is not talking to me until I get another phone or fix this one but I hate admitting defeat on technical problems.:crying:
PS I dont mind if I fix the issues with shadows rom, go back to any stable build or get cm10 working I just need the phone.
Thanks in advance, Tim
update
Hi All,
Just a quick update on this thread as I`ve had a bit more of a play and think I`m getting somewhere possibly.
I have now eliminated the problem of not being able to see the sd card files in file manager when the usb is connected.
How? - i haven't got a clue, i just unsuccessfully tried flashing a few more roms and when I reinstalled shadows rom i could view files whilst connected.
Also the 2ndinit now gives me the green led when it installed the 2nd boot but unfortunately I still dont get the blue led on reboot.
Another strange thing is I dont get the round M logo on boot but motorola written in white??
If I could just get to the CW recovery on boot I could install cm10.
Any suggestions?
Thanks
Tim
fixed by flashing with JDGC_U6_2.13.0
YESS FIXED BY FLASHING JDGC_U6_2.13.0 SBF using RSD lite.
Many thanks to everyone that helped via another thread http://forum.xda-developers.com/showthread.php?t=1217016&page=2, I thought they were far too many issues with this phone to repair but the latest froyo rom and kernal in the above sbf worked fabulously.
As has been said on several posts flashing this SBF will not allow you to return to the uk stock rom after (to return a phone under warranty etc) but if you're stuck with a brick then this should clean up your phone to original settings to allow the install of cm10 or another rom of your choosing (as long as its build 6 or later)
Have searched the forum and couldn't find any discussion about a similar problem to what i'm having with my phone. This is super weird.
I'm on an official B928 rom. It started some time ago. Whenever i reboot my phone it "resets" to a particular state. Which means - everything i do with my phone before a reboot gets reversed back to a particular state at which my phone "froze". If i delete sms, they come back, if i install programs they are gone, if i uninstall programs - they come back and so on..
I've tried to flash B928 and B552, but i always get an error at the second stage (have tried all possible combinations - with/without the battery, formatting the card). Pink screen is blocked - can't unblock it, because my phone deletes the necessary files after reboot. Can't install CWM for the same reason.
Is that it? I'm out of ideas. If anyone can throw any idea at me or direct me in the right direction i would be very grateful.
Thank you
reboot recovery
advance menu
format /data
take a look if it help
I only have the standard recovery, not cwm, it doesn't have advanced menu.
But even if i try the wipes in it, it does nothing, meaning it doesn't even delete my data.
Thanks
I'm having the same issue with my u8800-51. My thread is here http://forum.xda-developers.com/showthread.php?t=2331209 but no suggestions therein have helped, yet.
Ok, i see. I've seen some people restoring their phones with Acronis, but for this you need a working pink screen, which is a no-go for me..
Yes this post is correctly dated. I've had this device a LOOOONNNGGG time.
The device has been rooted since shortly after I bought it new years ago. I've had very few problems since... which is why it's never been replaced.
I believe I have the stock ROM, sorry it's been a while.
When I start the device it gets stuck at the splash screen with the sprint logo.
I can get the device to "download mode" but I don't know what to do once there and I'm not sure I can do anything from here.
I can get the device to "android system recovery."
I know I installed TWRP when I rooted and installed the rooted ROM but when I boot to recovery it doesn't go there.
I've wiped the "cache partition" but the problem remained. I'm not sure what else to do from here and still be able to salvage data.
I'm trying to salvage the data on the internal storage. I'm pretty sure I could successfully "wipe data/ factory reset" and get it to "function" again but that's not the priority. I'm going to replace it regardless of success or failure. Data recovery is the priority here. (pictures and videos of my young children as well as less important stuff like contacts.)
I have an old laptop with an old version of ubuntu I can use or a newer one with windows 7 to work with. I mention this in case it makes this easier to help?
Thank you very much if you try to take a stab at this or refer someone that might!
Update:
So I managed to install TWRP via Odin.
I booted to this recovery and my data partition appears to be empty?
When I try to back up I get the error message "unable to mount '/data'"
I tried doing a wipe, not one of the fancy extra options ones just the regular wipe and it failed.
Any guidance will be extremely appreciated.
Edit:
So I've come to the conclusion that the data isn't accessible because of encryption and my pass code. Is there any way to enter it via recovery and access this info?
Is anybody out there?
Edit 2:
I hope this helps someone someday. I haven't solved the problem but I think I'm making progress.
First I had an old version of TWRP. I installed the latest for my device and tried backing up again. I'm not sure but I think it's working. TWRP dosen't seem to need my password for the backup. I imagine I'll just need it to access the data later.
Edit 3:
No sooner did I save the last edit and my backup failed.
Process ended with error : 255