Hi
I looked around but can not find any info, I installed ICS RC1 then ICS RC2.1
and last ICS RC2.1.1 but I can not find NovaLauncher settings.
The firist time I installed RC1 i also installaed the ICS RC1 Repack which had different fixs, my question is must I install all again including that build?
I thought that these would be inclueded in [ROM][ICS] Onecosmic's ICS Port Android 4.0.3 RC2.11 OUT! but I may be wrong.
Thanks for your help.
You have to download Novalauncher and install it yourself. Its available on the market and on the forums here
Hi all,
Before to explain my problem, I want to do my Apologies because I'm french and my English isn't Fluently ^^
So, I have a TF300T unlocked with TWRP. I setup the stable CM 10.2 for my tab and it was a success.
But when i want to update with the CM11 proposed in Settings of the Tab, i have this message in TWRP :
E : error executing updater in zip '/sdcard/cm-11.....
Error Flashing ZIP.
Failed in red
My intial config is JB Stock 4.2.1.
I tried to install a CM 11 directly with TWRP and didn't work ....
Can you Help ME please ?
I have to install CWM ? But wich version ?
Thanks for you help .
(Now i set up a official 4.2 from Asus (available on Asus Website) in waiting an issue)
With an OmniRom, I have the same problem ...
Sense
Sensenix said:
Hi all,
Before to explain my problem, I want to do my Apologies because I'm french and my English isn't Fluently ^^
So, I have a TF300T unlocked with TWRP. I setup the stable CM 10.2 for my tab and it was a success.
But when i want to update with the CM11 proposed in Settings of the Tab, i have this message in TWRP :
E : error executing updater in zip '/sdcard/cm-11.....
Error Flashing ZIP.
Failed in red
My intial config is JB Stock 4.2.1.
I tried to install a CM 11 directly with TWRP and didn't work ....
Can you Help ME please ?
I have to install CWM ? But wich version ?
Thanks for you help .
(Now i set up a official 4.2 from Asus (available on Asus Website) in waiting an issue)
With an OmniRom, I have the same problem ...
Sense
Click to expand...
Click to collapse
You need to use TWRP 2.6.3.2 to flash CM11 or OmniROM. Install it and then reboot back into CM10.2 and then install CM11.
Is there no recovery that will install both cm10 and cm11?
Sent from my TF300T using Tapatalk
kmoffat said:
Is there no recovery that will install both cm10 and cm11?
Sent from my TF300T using Tapatalk
Click to expand...
Click to collapse
It is not possible to flash both CM10 based ROMs and CM11 based ROM on the same TWRP without editing the ROM itself.
cmendonc2 said:
It is not possible to flash both CM10 based ROMs and CM11 based ROM on the same TWRP without editing the ROM itself.
Click to expand...
Click to collapse
Patches to make both work are under way. My MultiROM TWRP can do both without changes, but it is much harder to integrate into a normal ROM+recovery build. Those patches are still unstable.
Sent from my TF300T using Tapatalk
suggestions?
I currently am (happily) running cm10.2 with twrp v2.6.3.0, bootloader US_epad-10.6.1.27.5-20130902 but would like to try kitkat. Would multirom be an option? (I'm new to this, and have only tried CROMi-x and CM10.2) Or would a flash of an updated twrp and cm11 be a better choice for a newbie?
thanks!
SOME NEW PORTED ANDROID 4.4.4 KITKAT ROMS FOR SAMSUNG CAPTIVATE
ANDROID 4.4.4 KITKAT CAPTIVATE ROMS:
- SlimKat 4.4.4 - 9.0 weekly 8328 - 2015.01.01
- SlimKat 4.4.4 - 8.18 weekly 8115 - 2014.12.02
- SlimKat 4.4.4 - 8.0 weekly 6965 - 2014.09.23
- SlimKat 4.4.4 - 7.8 weekly 6274 - 2014.09.02
- SlimKat 4.4.4 - 7.6 weekly 6228 - 2014.08.26
- SlimKat 4.4.4 - 6.8 weekly 5772 - 2014.07.28
(original thread)
- OmniRom 4.4.4 official 2015.01.28 nightly
- OmniRom 4.4.4 official 2014.12.06 nightly
- OmniRom 4.4.4 official 2014.09.01 nightly
- OmniRom 4.4.4 official 2014.07.09 nightly
- OmniRom 4.4.4 official 2014.06.23 nightly
(original thread)
- ArchiDroid 4.4.3 - 2014.06.19 fixed version (gapps included)
(original thread)
- Carbon (KK4.4.4) unofficial - 2014.07.13-1450
(original thread)
- C-Rom v7.1 (KK4.4.4) - 2014.06.22
(original thread)
- EHNDROIX V 14.8.8 (KK4.4.4) - 2014.08.07
(original thread)
- L-Droid-v2.2.2 (KK4.4.4) - 2014.07.07
(original thread)
- BeanStalk-4.4.4007 (KK4.4.4) - 2014.07.12
(original thread)
- SpiritRom v1.4 (KK4.4.4) - 2014.09.22
- SpiritRom v1.2 (KK4.4.4) - 2014.08.17
(original thread)
- LiquidSmooth v3.2 Odex (KK4.4.4) - 2014.08.30
(original thread)
- Omni + Floating Windows + Lockscreen Notifications + App Circle Bar (KK4.4.4)- 2014.08.11
(original thread)
- Mackay Rom 4.9.12 (KK4.4.4) - 2014.09.14
(original thread)
- AOKP 4.4.4 - 2014.12.04
(original thread)
- PAC ROM KK 4.4.4 - 2014.12.06
(original thread)
GAPPS: PARANOID MODULAR PACKAGES (ART compatible)
PA Gapps packages
OTHER NON 4.4.x KITKAT ROMS
- AOKP 4.2.2 Milestone 2
(gapps needed)
- GlassMix Rom 4.1.2 - 2014.06.27 (by KruciFFF)
(original thread)
****
KK 4.4.3 + 4.4.4 COMPATIBLE KERNELS
- NeatKernel 1.09, 1.11 or newer.
- Semaphore kernel 3.4.3 updated by iyahman
- CM11 Captivate 4.4.3, 4.4.4 stock kernel (attached)
Monfro said:
SOME NEW PORTED 4.4.2 KITKAT ROMS FOR SAMSUNG CAPTIVATE
Stock CM11 kernel
4.4.2 CAPTIVATE ROMS:
OmniRom official 2014.05.08 nightly
(original thread)
Paranoid Android 4.3 beta 3 - 2014.05.08
(original thread)
SlimKat 4.9 weekly 3921 - 2014.05.05
(original thread)
GAPPS: PARANOID MINI MODULAR PACKAGE (works with ART)
Goo.im
Android File Host
Dev-Host
I will update this thread and post new roms in my free time, not on regular basis.
Click to expand...
Click to collapse
Will this work with captivate?
galaxys3lover said:
Will this work with captivate?
Click to expand...
Click to collapse
Of course!!
I ported these roms so Captivate users can have more roms to play with.
Roms uploaded.
Unfortunately today i did not succeed to upload also "SlimKat 4.9 weekly 3921 - 2014.05.05" : i will on monday.
To all: feel free to request the port of any Galaxy S I9000 or Vibrant rom.
When i will have some spare time i will port them to Captivate.
Downloading SLIMKAT! Thx!!!
Edit: It's amazing your work on SlimKat, really, really fast. Great job
Rezakorn said:
Downloading SLIMKAT! Thx!!!
Edit: It's amazing your work on SlimKat, really, really fast. Great job
Click to expand...
Click to collapse
Thank You.
Mainly Semaphore Kernel has the merit to make "SlimKat stable 3" so fast.
You can tweak it with Semaphore Manager app (i suggest SmartassV2 and ROW)
Maybe i will incorporate Semaphore Kernel in next ports...
On the other hand if i use CM11 as standard kernel, users can flash later Semaphore or NeatKernel, and maybe reflash rom if they want CM11 kernel.
So they have 3 different kernel options (CM11, Semaphore and NeatKernel)
only kitkat?
http://forum.xda-developers.com/showthread.php?t=2660668
can u please port this rom with it's integrated kernel ..sorry for asking. I know port a kernel is difficult ..just asking
thank you for ur great work..
Cool! Thank You!
Personally, which combination gives more battery life??
ajeesh vijayan said:
http://forum.xda-developers.com/showthread.php?t=2660668
can u please port this rom with it's integrated kernel ..sorry for asking. I know port a kernel is difficult ..just asking
thank you for ur great work..
Click to expand...
Click to collapse
I was also going to ask for this but kind of hesitated since it is ICS. People using this are extremely happy with it.
Also @Monfro could you please add the Md5ums of the files if it is not much trouble?
And of course thanks for your work!
ajeesh vijayan said:
http://forum.xda-developers.com/showthread.php?t=2660668
can u please port this rom with it's integrated kernel ..sorry for asking. I know port a kernel is difficult ..just asking
thank you for ur great work..
Click to expand...
Click to collapse
eNemy- said:
I was also going to ask for this but kind of hesitated since it is ICS. People using this are extremely happy with it.
Also @Monfro could you please add the Md5ums of the files if it is not much trouble?
And of course thanks for your work!
Click to expand...
Click to collapse
Probably this week i will work on it; i have seen too a lot of people happy with it.
From my personal experience i remember that AOKP was the fastest ICS rom, and when 4.1 Jelly Bean was out it was smoother, thanks to project butter. So i think that 4.1 and 4.3 should be both faster than 4.0 ICS. Anyway we will see soon...
I have noticed that i made a mistake on both versions of OmniRom i posted.
I uploaded the new corrected versions, so OmniRoms now are good to go.
Monfro said:
SOME NEW PORTED 4.4.2 KITKAT ROMS FOR SAMSUNG CAPTIVATE
Click to expand...
Click to collapse
My Slimkat is very smooth and fast but I can't get root access any suggestions?
- Posted SlimKat build.4.9 with NeatKernel.
- Posted MackayROM CM9 with GearKernel.
Posted gapps for ICS 4.0 (removed everything about FaceUnlock: no front camera on Captivate)
Avikar said:
My Slimkat is very smooth and fast but I can't get root access any suggestions?
Click to expand...
Click to collapse
Settings/About: tap build number many times to activate developer options, and in developer options select root: apps and adb.
Thanks.
Monfro said:
- Posted SlimKat build.4.9 with NeatKernel.
- Posted MackayROM CM9 with GearKernel.
Posted gapps for ICS 4.0 (removed everything about FaceUnlock: no front camera on Captivate)
Settings/About: tap build number many times to activate developer options, and in developer options select root: apps and adb.
Click to expand...
Click to collapse
Loving it!!!!!
you. are so fast...anybody tried new cm9? how's it ..is it having universal gear kernel ..I had problem with gear kernel (lost imei) before ...
ajeesh vijayan said:
you. are so fast...anybody tried new cm9? how's it ..is it having universal gear kernel ..I had problem with gear kernel (lost imei) before ...
Click to expand...
Click to collapse
It packs GearKernel for ICS, not universal version.
It should be ok.
I decided to use it since it is based on Semaphore, also adding OC steps and it is updated.
There are also a lot of other ICS kernels available.
If you want to be sure before flashing make a backup of EFS folder.
If you will lose the IMEI flash a 4.3 rom like Slim and IMEI will be back.
I forget to write that the rom and kernel have the BigMem mod.
Please report feedbacks on this and other roms.
And also on kernels for 4.4.2 roms...better to use as stock NeatKernel, Semaphore or plain CM11??
Monfro said:
- Posted SlimKat build.4.9 with NeatKernel.
- Posted MackayROM CM9 with GearKernel.
Posted gapps for ICS 4.0 (removed everything about FaceUnlock: no front camera on Captivate)
Click to expand...
Click to collapse
E: Cant mount / sdcard
E: Cant mount / external_sd
I formatted my cappy back to stock and then even same problem persists.
Avikar said:
E: Cant mount / sdcard
E: Cant mount / external_sd
I formatted my cappy back to stock and then even same problem persists.
Click to expand...
Click to collapse
MackayROM CM9??
Since i can't it now:
Can you please flash the rom and then directly one of these kernels (flash rom+kernel then reboot):
Semaphore 1.3
Semaphore 1.2.6
Please let me know
Monfro said:
MackayROM CM9??
Since i can't it now:
Can you please flash the rom and then directly one of these kernels (flash rom+kernel then reboot):
Semaphore 1.3
Semaphore 1.2.6
Please let me know
Click to expand...
Click to collapse
Dear Monfro,
It goes like this:
1: Boot to recovery.
2: Wipe data + cache
3: install MackayROM CM9 from sd card:: It restarts itself and boot to recovery.
4: install from sd card/ external_sd :: and then no memory exists there.
5: I have to go back to stock every time.
Avikar said:
Dear Monfro,
It goes like this:
1: Boot to recovery.
2: Wipe data + cache
3: install MackayROM CM9 from sd card:: It restarts itself and boot to recovery.
4: install from sd card/ external_sd :: and then no memory exists there.
5: I have to go back to stock every time.
Click to expand...
Click to collapse
I forget CM9 is on an old partition layout.
Flash the first time: it converts partitions to the layout used in CM9, then it reboots to the recovery just flashed.
It is normal this way.
Flash the second time: it installs the rom.
But you can't since /sd card and /external_sd are not mounted.
Try this: flash one of the semaphore kernel i linked. reboot recovery and then flash rom.
Tomorrow or the day after i will post again the rom with some modifications.
Greetings, i am new here and i am posting this just in case someone gets problem like this and doesn't know how to fix.
If you accidentally tried to install ROM for ZTE Blade III with older Clockwork mod recovery version (i.e. tried to install KitKat 4.4 CM 11 with 6.0.2.7 instead with 6.0.4.9)
Just find older CM version in this case CM 10.1 and install it, it should get you JB 4.1.2 version working and then you can install newer CW version or install back stock ROM.
Hope this helps someone.
Cheers.
hi everyone
this xpose for MIUI 8/9 7.1.x can run deodex or not, for me its work.
PS. I just Found in internet
https://drive.google.com/file/d/0B-wPfqS7ygLjSzNrV3RYTWtWUlU/view?usp=sharing
Is it the same as the test 4 version? Could you maybe link the source so we can see whether theres an update?
Systemless xposed zip file is available for miui8 ?
Please guide me I've searched internet couldn't find one
install ROM odex/no odex. setup, boot into recovery install exposed
santo80s said:
install ROM odex/no odex. setup, boot into recovery install exposed
Click to expand...
Click to collapse
i meant Magisk version of xposed which works on miui 8
Edit : found out that systemless xposed 88.2 (based on official release which supports miui) works fine in max 2 running miui 8.5.8