[NIGHTLY][ROM][4.2.2] CyanogenMod 10.1 for Samsung Captivate - Captivate Android Development

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Downloads
Latest build: http://download.cyanogenmod.org/?device=captivatemtd
Google Apps: http://goo.im/gapps
Installation
- First time flashing CM10.1 to your Captivate (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9/CM10?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM10.1 Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: The partition layout of CM10.1 is identical to that of CM10 and thus you may use CWM to backup/restore.
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
IRC
Join us on #teamhacksung-support (user channel) or #teamhacksung (developer channel)
Changelog
A rough changelog is available here:
http://changelog.bbqdroid.org/#/cm10.1/captivatemtd or http://10.1.cmxlog.com/?device=captivatemtd
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!

Working great. You're the best. Thanks.
Sent from my SGH-I897 using Tapatalk 2

Amazing work.
New life for our Cappy:
Thank you very much.

Awesome.
Thanks so much for your hard work.

Thanks! Downloading...

Got it installed and runs great
- Formatted sdcard
- Installed ROM after full wipe
- Installed gapps
- Apps restored perfectly
So far no issues but haven't tested headphone audio but rear speaker works good and camera seems to work fine
~~~~~
pateln01 a.k.a. Headphones
Samsung Captivate running CyanogenMod
http://theandroidrealm.blogspot.com

will try it
thanks :fingers-crossed:

Thanks a TON DLd it right away.

For a pre-nightly, this is damn impressive. Thanks pawtip.

@pawtip are there any major difference with your [AOSP][ROM][4.2.1] JellyBean 4.2 (20121209) ??? I flashed that a few days back on my wife's captivate and she tells me its fantastic. So she is now curious about this release.

Significantly smoother and faster than the AOSP rom, with added CM goodies (back to ICS level).
Aside from (still) having no GPS, I'm very content with this update.

I'm using this as a daily driver ATM. Only issue I see so far is GPS. Which I'm sure AngryGPS might be able to fix. Just I haven't had time to test that theory.

@Lollipop_Lawlipop
JB 4.2 uses the equivalent to Semaphore's Smooth UI, so it should feel smoother. (http://www.android.com/whatsnew/)
I'm using this ROM with Semaphore 2.8 sc and everything seem to be ok. Restored all my apps with TiBu and besides a warning about turning USB Debugging on and taking an eternity restoring, everything went well.
Now to the questions:
Developer Options isn't showing on settings. It's supossed to be that way?
The navigation bar options aren't showing but that's because this is a pre-nightly, I presume.
Whats the matter with GPS? I'm indoors at work so I can't test it.

What I meant was that this release is significantly faster and smoother than the 4.2.1 AOSP rom we had previously. That one had a bit of lag in basically everything, including waking up and going to sleep.
In this rom, the example I referred to is back to the snappy speed we had from stable ICS roms.
I do know that 4.2 is more buttery than 4.1. I would know - I have a nexus 7 the hardware is slow on the captivate though so the extra smoothness is not very apparent.
Developer options can be accessed by tapping the build number in about phone 7 times.

Bravo! Just flashed and restored all of my apps. I'm really impressed with the fluidity and functionality so far for a prenightly. :thumbup:
Sent from my SGH-I897 using Xparent ICS Tapatalk 2

Are you sure that GPS is broken? It worked on the I9000 and I don't see any reason why it'd be broken here.

Alright now everyone before we start going on that the GPS doesn't work first check in settings under location access to make sure GPS is on. Now go back to settings then under accounts section tap on Google account and tap on location settings under privacy. Finally make sure that the location access switch is in the on position. If anyone has trouble regarding GPS try this method first then report back. I would also like to say that Pawitp, this ROM runs solid no problems as of yet and GPS locks on in under 10 sec. Thanks man really appreciate it have been waiting for this ROM for what seems like forever but I'm glad its here now.

I'm out of the office now and just tried GPS. GPS works for me with N drive, and GPS status. It struggled a little (30 s) but got the fix.
Sent from my SGH-I897 using xda premium

pawitp said:
Are you sure that GPS is broken? It worked on the I9000 and I don't see any reason why it'd be broken here.
Click to expand...
Click to collapse
Works fine here. Everything works... Every. God. Darn. Thing.
Except photosphere and FM radio and front camera. L.M.A.O.
Sent from my SGH-I897 using Tapatalk 2

lownox said:
Works fine here. Everything works... Every. God. Darn. Thing.
Except photosphere and FM radio and front camera. L.M.A.O.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
I heard LTE doesn't work either

Related

[ROM] CyanogenMod 7 for the Samsung Captivate :: V7.1.0 (9 Oct 2011)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the Samsung Captivate, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post​
CyanogenMod:
Latest version: update-cm-7.1.0-Captivate
Download: link
Mirror: link
MD5sum: d04c6727aedf99e6b8ac4fd48ce6a20b​
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link​
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
flashing from GB
So, I'm going to go ahead and be the first guy to ask this: can someone help provide some guidelines for flashing from GB? I'm currently running stock, rooted KI2, but no CWM.
Tell me if I'm on the right track:
Find a one-click back to stock eclair or froyo to replace the bootloaders.
Root and install Clockwork ROM manager and Clockwork Recovery
follow directions in OP to install CM7.1
Seems straightforward enough, but I have not yet tried to revert back to eclair/froyo from GB. Any suggestions for good, safe ways to do so? Is there something that can accomplish steps 1 and 2 in a single step?
For someone new to Cyanogenmod what are the differences between CM7 and CM7.1?
belyle said:
So, I'm going to go ahead and be the first guy to ask this: can someone help provide some guidelines for flashing from GB? I'm currently running stock, rooted KI2, but no CWM.
Tell me if I'm on the right track:
Find a one-click back to stock eclair or froyo to replace the bootloaders.
Root and install Clockwork ROM manager and Clockwork Recovery
follow directions in OP to install CM7.1
Seems straightforward enough, but I have not yet tried to revert back to eclair/froyo from GB. Any suggestions for good, safe ways to do so? Is there something that can accomplish steps 1 and 2 in a single step?
Click to expand...
Click to collapse
Yep. Just tried it and it works!
Just flashed over CM7rc and everything works great... Except my screen is forced to only half brightness.. All the settings show it is turned up with auto off but it is very dark..any one else?
Sent from my SGH-I897 using XDA App
GPS
Can someone please post whether or not GPS works properly? I'm wondering if it possible to get a accurate gps lock finally on this phone. I got one with stock ROM that still cant get a good GPS lock.
thank you.
micro2112 said:
Just flashed over CM7rc and everything works great... Except my screen is forced to only half brightness.. All the settings show it is turned up with auto off but it is very dark..any one else?
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Reflashed clearing data and cache again.. this time the screen stayed normal through first boot, then went dark again once apps were restored ( no i didnt restore anything system related)
CWM back to RC and will try to flash again later... anyone have any better/other ideas?
micro2112 said:
Reflashed clearing data and cache again.. this time the screen stayed normal through first boot, then went dark again once apps were restored ( no i didnt restore anything system related)
CWM back to RC and will try to flash again later... anyone have any better/other ideas?
Click to expand...
Click to collapse
My phone is doing the same thing. Do you have the Voodoo Control app installed?
does anyone know if this plays nice with gb bootloaders?
curti.nogg said:
My phone is doing the same thing. Do you have the Voodoo Control app installed?
Click to expand...
Click to collapse
i do! i didnt think it could activate voodoo color without a kernel support though
micro2112 said:
i do! i didnt think it could activate voodoo color without a kernel support though
Click to expand...
Click to collapse
the kernel supports RGB color tuning... this is why you don't restore application data with titanium backup...
screenshot please
I don't understand the point of this thread...
I'm not able to access my external card anymore. I'm not able to format it or mount it from recovery. Any tips?
ninjuh said:
I don't understand the point of this thread...
Click to expand...
Click to collapse
Really? This is CM 7.1.
Nice to be officially be supported! I have a question though, I have used CM7 on and off and was wondering if battery life issues have been solved/eased. At the time I thought that the issue was related to closed source drivers and thus unsolvable.
I have to admit, I haven't been following the CM development as closely as I should have, so sorry if I missed that one.
soul4rent said:
does anyone know if this plays nice with gb bootloaders?
Click to expand...
Click to collapse
I'd also like to know this.
if for example I have the at&t TB bootloaders (released in an Odin package by Cesar) and I'm currently on apex (rom) and talon (kernel) could I just flash from cwm? Its using cwm3, I would think the only main difference would be the newer bootloaders.
iXNyNe said:
I'd also like to know this.
if for example I have the at&t TB bootloaders (released in an Odin package by Cesar) and I'm currently on apex (rom) and talon (kernel) could I just flash from cwm? Its using cwm3, I would think the only main difference would be the newer bootloaders.
Click to expand...
Click to collapse
I have the KF1 BLs from Cezar and have repeatedly flashed between Samsung roms (Apex and Pinnacle) and CM7 nightlies with no problems. I never flash anything with BLs anymore.
Sent from my SGH-I897 using Tapatalk
Sagui said:
Nice to be officially be supported! I have a question though, I have used CM7 on and off and was wondering if battery life issues have been solved/eased. At the time I thought that the issue was related to closed source drivers and thus unsolvable.
I have to admit, I haven't been following the CM development as closely as I should have, so sorry if I missed that one.
Click to expand...
Click to collapse
I just read today that the reason is they can not get some components to sleep properly due to closed source drivers. No, that has not been solved. There isn't enough of a difference though to make me use a Samsung ROM...
Sent from my SGH-I897 using Tapatalk
Can I flash this over my current setup? See my signature. If yes what is the best way? Thanks! If this is not the right place to ask this question, please let me know.
I guess I should have posted this in the Q&A section but there is no Q&A for 7.1 yet. Can the mods move this post if a 7.1 thread is started. Sorry!

[ROM] CyanogenMod 7 for the HTC Eris :: V7.1.0 (9 Oct 2011)

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the HTC Eris, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post​
CyanogenMod:
Latest version: update-cm-7.1.0-Eris-signed.zip
Download: link
Mirror: link
MD5sum: 76a60fce572288aecc4884b63c565fef​
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link​
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Just wonderingif this is 2.3.5-or 2.3.?
sk842018 said:
Just wonderingif this is 2.3.5-or 2.3.?
Click to expand...
Click to collapse
2.3.7
10chars
sk842018 said:
Just wonderingif this is 2.3.5-or 2.3.?
Click to expand...
Click to collapse
The changelog says 2.3.7
I believe this is probably cm's stable release... 2.3.7...
sk842018 said:
Just wonderingif this is 2.3.5-or 2.3.?
Click to expand...
Click to collapse
Sent from my Miui Dinc2 using XDA app
Lol,sry guys I read right over that
---------- Post added at 09:41 PM ---------- Previous post was at 09:06 PM ----------
Just flashed and got it set up its running very well, Extremely responsive and FAST,Great job.
Holy cheese crakers! Serious! Cyanogenmod Here with a rom! I must be dreaming! Im up for an upgrade and look,i might just wait now! about to flash this baby!
Gotta flash this sooner or later and give it a test run. Never thought I'd see the day, hooray for our tiny Eris getting official CM7.
So far it is working great on one of my eris. It takes a bit of tweaking but it runs great. everything seems to be working. I did not take a drive with the NAV yet but it is working. No reboots and all the other apps are also working great.
[* said:
Root the device and install ClockworkMod Recovery
Click to expand...
Click to collapse
First off thanks so much for all of your work devs, I greatly appreciate it. Secondly, I realize these instructions are probably generic, but I think it should be mentioned that CWM and the Eris do not play nice (if memory serves right). Maybe edit that section to redirect to the flashing Amon RA recovery thread.
Thank you again guys
Sent from my "End of Life" Eris
crimson12 said:
First off thanks so much for all of your work devs, I greatly appreciate it. Secondly, I realize these instructions are probably generic, but I think it should be mentioned that CWM and the Eris do not play nice (if memory serves right). Maybe edit that section to redirect to the flashing Amon RA recovery thread.
Thank you again guys
Sent from my "End of Life" Eris
Click to expand...
Click to collapse
I've been using CWM (via ROM Manager) on my Eris for a year and three months without one problem. As it is through ROM Manager, of course, that means I'm using it on top of Amon RA, but just wanted to point out that CWM has never had a problem on me. Sorry for OT post.
I kinda feel bad using this since I've been using some of the other ROMs available, but this is running perfectly so far. Super fast boot up times, smooth scrolling, the new lock screen is like buttah.
Nice to see this truly officially official for the Eris!
I wish it had come sooner, but this will definitely tide me over until I can grab up the Galaxy Nexus - thanks!
Navigation seems to work without force closing. This is good. Very stable. no 3g drops. Needs kernel speed tweaks to bring it up to the level of gsb or condemnedcm7. Can use some more balanced memfree settings (zepplinrocks scripts should work if you use them I don't). Definitely set to over clock at 710, plus set jit and 18% compcache and lock home in memory.
Sent from my ERIS using XDA App
downloading
Sent from my ERIS using xda premium
CyanogenMod said:
Official post​
Click to expand...
Click to collapse
Link doesn't work
Flashing now
Working great. Navigation goes crazy in landscape for some reason. Might just be my phone.
Sent from my ERIS using XDA App
Maybe a bug I found or just my setup.
But if you look at your call log and press the bottom one on the list you can not you can not open it up it opens but you can not scroll down. Can anyone please see if this if like this on your phone also?
You have to have at least a full page or more of call logs.
Thanks
smartens82 said:
Working great. Navigation goes crazy in landscape for some reason. Might just be my phone.
Sent from my ERIS using XDA App
Click to expand...
Click to collapse
Mine does the triple draw too if that's what you mean
UPDATE:
Per Workshed's GSB thread:
"...auto rotate got borked in 2.3.7 some how. Run gallery or maps and then switch to landscape mode and you'll see the view gets garbled with a triple screen."
Reposting regarding the rotation problem. Thanks condemnedsoul for this.
computerfreek said:
CondemnedSoul posted the Fix for it. This fix will work with GSB and CM Official as well.
http://forum.xda-developers.com/showpost.php?p=18370172&postcount=1135
Click to expand...
Click to collapse
Sent from my ERIS using XDA App
klobkelosh said:
[...] Definitely set to over clock at 710, plus set jit and 18% compcache and lock home in memory.
Click to expand...
Click to collapse
Anybody wanna back this up? Doesn't seem noticeably slower for me at the CM default of 604, and JIT was on by default I think. compcache is off, even though it says "default" next to 18% (huh?).
I DO agree with lock home in memory though.

[NIGHTLY][ROM][4.1.2] CyanogenMod 10 for Samsung Captivate

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Downloads
WARNING: /data will be wiped when upgrading from CM7/CM9 (but you should wipe anyway)
Latest nightly: http://get.cm/?device=captivatemtd
Google Apps: http://goo.im/gapps
Installation
- First time flashing CM10 to your Captivate (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM10 Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: Nandroids of CM7, CM9 and CM10 are incompatible due to partition layout changes. Please be on the correct version before restoring Nandroids.
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Please check the list of issues before creating new issues.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
IRC
Join us on #teamhacksung-support (user channel) or #teamhacksung (developer channel)
Changelog?
A rough changelog is available here:
http://changelog.bbqdroid.org/#/cm10/captivatemtd
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
first?
Downloading now
Third? Thanks, trying now.
Sent from my SGH-I897 using xda app-developers app
Yes, the first Official CM10. Can't wait for more goodies.
Sent from my SGH-I897 using xda premium
Yay, in on page one of what will surely be another epic thread. Thanks pawtip!
ETA: Are you going to edit the OP with details regarding this ROM, i.e. what changes we can expect with it, differences over CM9, screenshots, known incompatibilities between it and various apps/themes/kernels, etc? I noticed the CM9 thread lacked this vital info that is usually included(for the most part) in other ROM threads.
Coolness! I can't try it yet since I don't have my phone. Anyone tried it out yet? How does it compare to Hellybean?
very cool downloading now
This is what I did:
Upgrading from another CM10 Build? Came from DerTeufel
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon.
First flash went into a bootloop. Pulled battery, insert battery, 3 button to cwm and re-flash, flashed ok this time. Flash addons and reboot system. Instead of starting up it went back to CWM. Reboot system again phone started up. Setting up now.
Wicked, I am happy about this!
Sent from my cm_tenderloin using xda premium
Sweet! Would you guys recommend moving from the Helly Bean cm10 rom to this? Love the devil kernel, so damn fast.
I have a feeling this will be a thread to watch!
fohdeesha said:
Sweet! Would you guys recommend moving from the Helly Bean cm10 rom to this? Love the devil kernel, so damn fast.
I have a feeling this will be a thread to watch!
Click to expand...
Click to collapse
Since everbody's phone reacts to roms differently, I would say try it and make your own decision.
So far I have no problems. It runs fast and smooth. Of course it's only been an hour or so since I been on it.
richsale said:
Since everbody's phone reacts to roms differently, I would say try it and make your own decision.
So far I have no problems. It runs fast and smooth. Of course it's only been an hour or so since I been on it.
Click to expand...
Click to collapse
Could you get us some screenshots?
Any chance you'd be able to let it idle for X hours from a full charge and post the battery info screenshot for us?
Is it just me or is WiFi tethering not working? Every time I turn on Portable WiFi hotspot option, it turns off my WiFi automatically (if it is turned on). If WiFi is not turned on, turning on WiFi hotspot option won't turn it on either.
I know I've read about people having errors downloading from the Play store before. "Error retrieving information from server.", not necessarily with any CM Rom, however I've never had it happen before flashing this nightly. Anyone else recall this issue? and what the fix was?
Awesome job CM10 team! I'll stick with helly bean for now, but I will surely jump on the bandwagon once I see some positive results.
I love cyanogen!
ConeyKiller said:
I know I've read about people having errors downloading from the Play store before. "Error retrieving information from server.", not necessarily with any CM Rom, however I've never had it happen before flashing this nightly. Anyone else recall this issue? and what the fix was?
Click to expand...
Click to collapse
Nevermind, just reinstalled gapps. Guess I should try before asking!
My battery vanished, anyone else?
So far so good, I do miss devil kernel tho. I tried 1.1.3 that I thought was for this rom but it didn't fly. Pawtip, I know it is not recommended and you don't support it, but is there a devil kernel that works with this bad boy? Thanks for the efforts!
Sent from my SGH-I897 using xda app-developers app
tkjeeper said:
So far so good, I do miss devil kernel tho. I tried 1.1.3 that I thought was for this rom but it didn't fly. Pawtip, I know it is not recommended and you don't support it, but is there a devil kernel that works with this bad boy? Thanks for the efforts!
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Try a devil kernel without datadata
Sent from my SGH-I897 using xda premium

[AOSP][ROM][4.2.1] JellyBean 4.2 (20121209)

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a build of Android JellyBean 4.2 from AOSP source code based on the CyanogenMod device tree for Samsung Galaxy S I9000. I have made this build to gauge how difficult it would be to port JellyBean 4.2 to current devices. In its current state, I consider this stable enough for daily use.
Kernel Source Code: https://github.com/pawitp/android_kernel_samsung_aries/tree/jellybean-next
Other source code: See CM GitHub/Gerrit
What Works?
Almost everything you can think of, RIL, Data, Wifi, Camera, Audio, GPS, TV-Out, mounting external SD card on PC, etc. See the known issue list below for list of things that do not work.
Downloads
ROM: http://goo.im/devs/pawitp/captivatemtd_aosp42
Google Apps: http://goo.im/gapps
Installation
Note: this ROM uses the same partition layout as CM10 stable.
Do a Nandroid Backup!
Install the ROM using ClockworkMod Recovery
Optionally install the Google Addon (install it everytime you install the ROM as there is no backup system right now)
Known Issues
None
Features that are a part of CyanogenMod not AOSP
and thus won't be available in this ROM
T9 Dialer
Reboot Menu
Theme Engine
If you want these, use CyanogenMod when it's out!
Change Log
20121209/b]
Fixed: Broken SIM PIN Layout
Fixed: Bluetooth input devices not working
Fixed: No deepsleep with bluetooth on
20121205
Fixed: no direction arrow in Google Maps
Hopefully fixed: Wifi not working for some users (again)
20121202
Enable KSM
Fixed: Wifi not working for some users
20121201
Reverted Wi-Fi changes in 20121126
Fixed: Sim Toolkit (STK) does not work
20121130
Fixed: Live Wallpaper does not work
Fixed: Bluetooth not working
20121126
Initial release (includes all fixes made on I9000 up till 20121125)
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. The development of this preview will also cease once enough progress has been made in CyanogenMod. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Credits
CyanogenMod and all previous contributors and maintainers of the device.
Trying... Huge thanks Mr pawitp brings to us this one
Trying, thanks for 4.2!
Thanks for the hardwork
Thanks so much. My Captivate will be upgraded to 4.2 before my Nexus 4 even ships.
Sent from my SGH-I897 using xda premium
I can't install
Got this error
set_perm: some changes failed. E:Error in /sdcard/captivatemtd_aosp_jb42_20121126.zip (Status 7)
ghoster76 said:
I can't install
Got this error
set_perm: some changes failed. E:Error in /sdcard/captivatemtd_aosp_jb42_20121126.zip (Status 7)
Click to expand...
Click to collapse
+1
Sent from my SGH-I897 using xda premium
acras said:
+1
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
EDIT: Used the LANIGHT Hackfest updater-script, and it worked.
CM10 Stable Required or later nightly ok?
So this should work if I'm running the 11/25 CM10 nightly? Or does it require CM10 stable?
Yep, I have been trying different combos with LaNight also. Couldn't get WiFi to connect so I will keep trying to work the two releases. I will keep posting if I find anything.
Error 7 using 11/25 Nightly
Yup, once I hit install I get
set_perm: some changes failed
E:Error in /sdcard/captivate_aosp...
(Status 7)
Installation Aborted
Can you get /tmp/recovery.log via adb right after the error and post it?
Sent from my GT-I9000 using xda app-developers app
pawitp said:
Can you get /tmp/recovery.log via adb right after the error and post it?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Done!
I've uploaded 20121126v2 which should fix the problem
No issues on a straight upgrade from CM10 -> jellybean next. I manually fixed the issue with the v1.
Wifi works fine, and although there's no DSPManager in AOSP, I downloaded Voodoo Control App and changed my Voodoo Sound settings there. That worked fine too.
Anything specific you want us to test, pawitp?
Lollipop_Lawlipop said:
No issues on a straight upgrade from CM10 -> jellybean next. I manually fixed the issue with the v1.
Wifi works fine, and although there's no DSPManager in AOSP, I downloaded Voodoo Control App and changed my Voodoo Sound settings there. That worked fine too.
Anything specific you want us to test, pawitp?
Click to expand...
Click to collapse
Not really.
Lollipop_Lawlipop said:
No issues on a straight upgrade from CM10 -> jellybean next. I manually fixed the issue with the v1.
Wifi works fine, and although there's no DSPManager in AOSP, I downloaded Voodoo Control App and changed my Voodoo Sound settings there. That worked fine too.
Anything specific you want us to test, pawitp?
Click to expand...
Click to collapse
Not really.
Anyone having trouble with the Play Store? I'm unable to download any apps. I'm getting an error message. I'll post details if a Factory Reset doesn't fix the issue.
Update: Everything works perfectly after another factory reset and a format of /system.
Awesome! I restored my cm10 setup but I'll try again later this week
Sent from my SGH-I897 using xda app-developers app
Been using for a few hours now haven't noticed any problems wifi is working, data works fine, play store is fine everything is nice and smooth
Sent from my SGH-I897 using Tapatalk 2

[ROM] Evervolv | 4.0.0p1 [AOSP 4.4.4] [3.4 kernel] [Nightlies] With /data/media

For those that don't know what evervolv is, Evervolv is an AOSP (Android Open Source Project) rom. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors.
Right now the current source we are working on is KITKAT(Android 4.4.4).
Current version: 4.0.0p1
Current Items not working/Buggy
Updated 4-4-14
Bluetooth working --Still a WIP as some devices don't connect
Camera working --Still a WIP as the camcorder records in blue and a few minor issues
home key doesn't turn device on need to use power button--FIXED in the next nightly should be 4-5-2014
Battery draw around 50mA in sleep
Some experience SOD when hotword detect is active
Location service has stopped with Googles update looking into now
You tell me what you find.
4G Models are not currently supported
Click to expand...
Click to collapse
Evervolv Github: https://github.com/Evervolv
Evervolv Gerrit: http://review.evervolv.com/
Evervolv website: http://www.evervolv.com/
(New Site is up Check it out)
Evervolv Bug Tracker: http://bugs.evervolv.com/
(Please have discretion when reporting issues, and be descriptive / helpful. Also understand that we'll have some growing pains with this. So don't expect everything to be perfect.)
Twitter: https://www.twitter.com/wbellavance
IRC: #evervolv
Click to expand...
Click to collapse
[GPL Compliance]
Kernel Source
Click to expand...
Click to collapse
[Download]
If you already have evervolv installed you should see this build under testing if you refresh and can download that way.
No more nightlies Moved to 5.0 Lollipop
ev_tenderloin-1-23-15 Last and final for 4.0 -> Fix netflix
FLINTMAN-TWRP-touch-data_media-SELINUX-2.7.1.0-6-7-2014.zip
--This is a flashing TWRP recovery with data/media and SELINUX support. I have tested 100% of the features and everything is working great as far as i can tell. Soo
with that being said. Use at your own risk 8). Make sure you save a backup from your current recovery just in case. BACKUP BACKUP BACKUP
--Broke Vibration as i updated kernel.
Click to expand...
Click to collapse
NOTE: Recommend a clean install if moving from a previous version and or another ROM.
Flashing from cm or any other ROM will require a clean install, dirty flashes can cause random reboots and random errors
[Disclaimer]
I am not responsible for bricked devices, lost data, etc, etc. You all know the drill. BACKUP BACKUP BACKUP
Click to expand...
Click to collapse
[Special Thanks]
i would like to thank Flemmard, Jcsullins, Dorregaray, Invisiblek, Milaq, and anyone else that helped to make this happen. More great work to come.
Mitchbaria --for a 4g model to start in on this
Colchiro-- For a spare Touchpad WIFI to be able to test on one and develop at the same time
Click to expand...
Click to collapse
GAPPS
---These are the gapps i use. You should be able to use any that are KitKat compatible
http://forum.xda-developers.com/showthread.php?t=2397942
Grabbing logcats and dmesg along with last_klog.
These are helpful in figuring out what is going on
Install the sdk in you PC http://developer.android.com/sdk/index.html
Logcat
"adb shell logcat >logcat.txt"
This will run until unplugged or ctrl c and all the content will go into that file
dmesg
"adb shell cat proc/kmsg >dmesg.txt"
This will run until unplugged or ctrl c and all the content will go into that file
Last_klog
"adb shell cat proc/last_klog >lastklog.txt"
This is for if you have a reboot run this right after the device starts back up and it will get me the last dmesg from before it reboot and will help determine the cause of the reboot.
This will help me and everyone that uses this ROM as i can determine the cause of issues.
Thanks
Thank you for the continued HP Touchpad Development and support Flintman.
Cheers:highfive:
Touchpad Toolbox By Jcsullins
[ROM GUIDE]How to use the TouchPad Toolbox to install Android "The Super Easy Way"
[GAPPS][4.4.x/4.3.x] OFFICIAL 0-Day PA-GOOGLE APPS (Use Mini or Micro packages)
Thanks to both of you. For the roms and the video walk thru. I haven't tried art on the touchpad because it actually makes my Galaxy Nexus slower most of the time. And with some gapps it's even worse. Since it isn't listed as broken I am assuming you have tried it. If I may ask. What gapps did you use and what was performance like? It prevented my nexus from booting at times. Just wanna stick with what you have tried until I get use to the new data media and such. Thanks again.
Moody66 said:
Thanks to both of you. For the roms and the video walk thru. I haven't tried art on the touchpad because it actually makes my Galaxy Nexus slower most of the time. And with some gapps it's even worse. Since it isn't listed as broken I am assuming you have tried it. If I may ask. What gapps did you use and what was performance like? It prevented my nexus from booting at times. Just wanna stick with what you have tried until I get use to the new data media and such. Thanks again.
Click to expand...
Click to collapse
I haven't tested as its still a wip from Google. I do have it as broken in the op. But good to know that it boots 8)
Sent from my SCH-I545 using xda app-developers app
Added another build see OP for what was changed. I also adding in a touch recovery TWRP with data/media and SELINUX support. This will also allow you access to your webOS media folder which is know in the new build as external_sd. I have tested out all the features and everything is working great but please save a full backup from your previous recovery if you decide to use this recovery as it's still in an Alpha state.
Enjoy
flintman said:
Added another build see OP for what was changed. I also adding in a touch recovery TWRP with data/media and SELINUX support. This will also allow you access to your webOS media folder which is know in the new build as external_sd. I have tested out all the features and everything is working great but please save a full backup from your previous recovery if you decide to use this recovery as it's still in an Alpha state.
Enjoy
Click to expand...
Click to collapse
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Lyok0ne said:
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Click to expand...
Click to collapse
I have flashed with this recovery about 20 times now and only got the reboot to hang once. I'm looking into it.
Lyok0ne said:
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Click to expand...
Click to collapse
install xposed + gravitybox. it works like a charm and has this feature and many others.
Sent from my Nexus 4 using Tapatalk
Okay, I am doing something wrong. I have downloaded the recovery multiple times from multiple devices. I have tried installing via TWRP and manually extracting the image to /boot.
Each attempt, I get:
Checking uImage... Invalid Size
BOOT FAILED!
Please SELECT to continue
Any thoughts? I can still load my backup copy of TWRP without issue.
Update:
After purging the other copies of TWRP from /boot, the new version loads without issue. Thanks flintman!
Discovered that the TP 4G not compatible with the test 3.X Kernel yet
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
If we flash your twrp will it remove cwm or add another entry? I've never been able to have two recoveries working. I would much rather not have to use the power button and what not all the time in cwm but want to make sure I'm covered if something goes wrong. Thanks
Sent from my TouchPad using Tapatalk
Due to the limit of the boot directory it will remove all recoveries before installing this one.
Sent from my SCH-I545 using xda app-developers app
Sorry for the Nube question I've searched and I'm sure it's been answered already....
So I got my touchpad with ClockworkMod Recovery version 6.0.1.9 can I flash the TWRP SE data/media recovery from there? Trying with the acme installer 5ET has failed.
I do have the original 4.4 Evervolv up and running and my partitions have been updated.
Thanks
Steve
SteveoSupremo said:
Sorry for the Nube question I've searched and I'm sure it's been answered already....
So I got my touchpad with ClockworkMod Recovery version 6.0.1.9 can I flash the TWRP SE data/media recovery from there? Trying with the acme installer 5ET has failed.
I do have the original 4.4 Evervolv up and running and my partitions have been updated.
Thanks
Steve
Click to expand...
Click to collapse
So I replaced the ulimage in the boot directory and was able to install the 1/10/14 rom. So I guess I needed to search and just try a little more.
anyway -- I think it's a little slower than the first 4.4 version.... Maybe I need to reboot.... thoughts?
steve
Both using same cpu settings? Although with more things implemented it could seem slower.
---------- Post added at 01:11 AM ---------- Previous post was at 01:07 AM ----------
emph4tic said:
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
Click to expand...
Click to collapse
I am curious. Have you tried turning the 4g off. Like airplane mode then just turning wifi back on? Was thinking of getting one of these models to tinker with.
Moody66 said:
Both using same cpu settings? Although with more things implemented it could seem slower.
---------- Post added at 01:11 AM ---------- Previous post was at 01:07 AM ----------
Click to expand...
Click to collapse
I think it was because of sync.... it's running smooth now. after I loaded a different set of GAPPS.
Now I have to figure out the camera apk. it would help if I RTFM.... Thanks Flintman for the awesome update!
Which version of gapps is recommended for 01-10-14 version?
New Test build up which fixes vibration
emph4tic said:
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
Click to expand...
Click to collapse
Do you think you can get me some dmesg and logcats??

Categories

Resources