Hi all -
I signed up for the t-mobile $30/month plan, but get spotty coverage. I want to try and see if the straight talk AT&T coverage is any better. If I get a micro-sim card from straight talk and put it in, and reboot the phone, would I be able to see my connection? Or would it be 'no service' until I've gone through the process of activating with straight talk?
I'm hoping it's the former as I'd like to know if my signal would be any better before going through the hassle of porting my number over. Thanks.
Zimako said:
Hi all -
I signed up for the t-mobile $30/month plan, but get spotty coverage. I want to try and see if the straight talk AT&T coverage is any better. If I get a micro-sim card from straight talk and put it in, and reboot the phone, would I be able to see my connection? Or would it be 'no service' until I've gone through the process of activating with straight talk?
I'm hoping it's the former as I'd like to know if my signal would be any better before going through the hassle of porting my number over. Thanks.
Click to expand...
Click to collapse
you should still be able to see bars. :good: atleast this is how it was on all my unlocked phones.
daddioj said:
you should still be able to see bars. :good: atleast this is how it was on all my unlocked phones.
Click to expand...
Click to collapse
Thanks for the reply. Hopefully this is the case; I've ordered the SIM so I guess we'll see shortly!
I have Straight Talk (AT&T), you won't see any bars until you activate the SIM card. If you port your number, there may be a delay also.
tatical said:
I have Straight Talk (AT&T), you won't see any bars until you activate the SIM card. If you port your number, there may be a delay also.
Click to expand...
Click to collapse
Thanks! I was afraid that would be the case. I would want to port my number as well. I'll run over to my local AT&T store and see if they'll give me a micro-sim too; I figure if I get signal with that one, then I should be fine with straight talk on AT&T (unless that sim would have the same issue?)
Whatever may be the plan or carrier doesnt change a thing: You do not have any signal until the SIM is activated. The SIM isnt related to a network before it is activated.
_Johnito_ said:
Whatever may be the plan or carrier doesnt change a thing: You do not have any signal until the SIM is activated. The SIM isnt related to a network before it is activated.
Click to expand...
Click to collapse
I'm pretty sure that when I got my t-mobile sim card, I had bars showing prior to activation.
If it was, then your SIM card was pre-activated. This is the only explanation
As stated before, you will not get signal/bars until the SIM is activate. Period.
_Johnito_ said:
If it was, then your SIM card was pre-activated. This is the only explanation
Click to expand...
Click to collapse
Odd, I wonder why they sent me an activated sim! I was still able to go online and put my IMEI, serial, etc in and activate it a few hours later.
Ah well, guess I'll have to activate service for a month to test with straight talk. I was just hoping to avoid the hassle of porting my number over prior to checking signal coverage.
Zimako said:
Odd, I wonder why they sent me an activated sim! I was still able to go online and put my IMEI, serial, etc in and activate it a few hours later.
Ah well, guess I'll have to activate service for a month to test with straight talk. I was just hoping to avoid the hassle of porting my number over prior to checking signal coverage.
Click to expand...
Click to collapse
I just switched out my plans from TMo Monthly 4G to Straight Talk AT&T. When I inserted the Straight Talk micro sim into the phone I got a message saying no sim card and had no bars until I activated it and had changed the APN numbers in the phones settings.
tatical said:
I have Straight Talk (AT&T), you won't see any bars until you activate the SIM card. If you port your number, there may be a delay also.
Click to expand...
Click to collapse
it must be only with this phone. because all my other unlocked phones have had bars showing no matter activated or not.
I think in some cases I've had bars / proper dBn showing in the settings in the past.
daddioj said:
it must be only with this phone. because all my other unlocked phones have had bars showing no matter activated or not.
Click to expand...
Click to collapse
Then it should be easy enough to test as you'd just have to pull your sim card out and see if you had a signal. You could then look in the phones settings under network operators to see who's signal it is.
daddioj said:
it must be only with this phone. because all my other unlocked phones have had bars showing no matter activated or not.
Click to expand...
Click to collapse
The original question was about a signal on an unactivated Straight Talk SIM card. I've had unactivated AT&T and T-Mobile SIM cards show a signal, but Straight Talk SIMs require activation to show a signal. I think it has something to do with them being a MVNO.
tatical said:
The original question was about a signal on an unactivated Straight Talk SIM card. I've had unactivated AT&T and T-Mobile SIM cards show a signal, but Straight Talk SIMs require activation to show a signal. I think it has something to do with them being a MVNO.
Click to expand...
Click to collapse
That would make a lot of sense! I'll post my findings when I pick up an at&t official sim card, and with the straight talk sim card.
Well, I have the straight talk sim, and sure enough - no signal at all. So that seems in line with what people here were saying. I visited two different AT&T stores as well to get an 'official' microsim, but neither place would give or even sell me a sim card. They said that I would not see signal without activation, and to not worry! That they could check coverage and tell me if I'd get signal! *rolls eyes* So that was a waste of time. I'll probably just bite the bullet and activate my next month on straight talk and see.
One question though - if I do NOT port my number right now, and instead get a new number via straight talk, would I then later be able to port my number or would I need to buy a new micro sim first?
You probably will be just fine, since you usually have a certain time to port your phone number. Even if you choose to port it right now, you will be given a temporary number during the procedure. But this is more of a question you should ask to the carrier, since it may be related to carrier policies or country laws. I have to admnit if i were you i'll be very careful to what they says
Related
Going to Cancun on Thursday. So I called Spring about my GS4 & GS3. They enabled the codes so that they connect to the towers in Mexico. But you still get charged $2.99 per call and for each text message. But I thought i read you could put a Sim-Card in these phones for them to work international. Anyone ever tried this?
shaun0207 said:
Going to Cancun on Thursday. So I called Spring about my GS4 & GS3. They enabled the codes so that they connect to the towers in Mexico. But you still get charged $2.99 per call and for each text message. But I thought i read you could put a Sim-Card in these phones for them to work international. Anyone ever tried this?
Click to expand...
Click to collapse
Ok, you need to do a little more research on the phones themselves. The GS3 does not have a removable SIM, it is embedded, so there's no chance of you inserting a local SIM etc.
The GS4 does have an accessible SIM slot but it is locked to Sprint. Even if you insert a non-Sprint SIM it won't work. Sprint want's you to pay their rates for international GSM roaming.
Even if you meet their requirements and get Sprint to unlock your GS4 SIM slot, it will work for calls and SMS with a non-Sprint SIM but no data (apparently some have found out, look in the forums)..
LordLugard said:
Ok, you need to do a little more research on the phones themselves. The GS3 does not have a removable SIM, it is embedded, so there's no chance of you inserting a local SIM etc.
The GS4 does have an accessible SIM slot but it is locked to Sprint. Even if you insert a non-Sprint SIM it won't work. Sprint want's you to pay their rates for international GSM roaming.
Even if you meet their requirements and get Sprint to unlock your GS4 SIM slot, it will work for calls and SMS with a non-Sprint SIM but no data (apparently some have found out, look in the forums)..
Click to expand...
Click to collapse
I haven't been out of the country yet to verify it, but I believe if you're rooted you will be able to get data by making a build.prop edit so you can add the appropriate APNs. Some people have reported though that they didn't need to do this, and data just worked automatically when they put in the SIM. I believe it was a UK carrier's SIM that just worked. I'll have a chance next week to try it out in Costa Rica and see if I can get data working.
Ingenium13 said:
I haven't been out of the country yet to verify it, but I believe if you're rooted you will be able to get data by making a build.prop edit so you can add the appropriate APNs. Some people have reported though that they didn't need to do this, and data just worked automatically when they put in the SIM. I believe it was a UK carrier's SIM that just worked. I'll have a chance next week to try it out in Costa Rica and see if I can get data working.
Click to expand...
Click to collapse
Hmmm. Lots of conflicting info on this. Someone did the build.prop thing and mentioned that the apn options were grayed out, so he basically couldn't edit anything. Even posted screenshots. Please try out your scenario and keep us informed. Thanks.
I have tried every code mentioned, in here, that was successful for others but not for me.
I started by buying my Galaxy S4, out right, at Walmart for use on Family Mobile. Poor signal everywhere except in my house. The phone has T-Mobile support as far as towers go. After about three weeks I had my phone number transferred to Straight Talk and they sent a SIM card for use with AT&T support. The phone was purchased as an unlocked phone, I did all the codes in this forum to check and sure enough, it is supposed to be unlocked, BUT, every SIM card I get from Straight Talk gives me "INVALID SIM CARD" when I boot up the phone then a black screen comes on with a subdued color message saying, "Sim network unlock PIN" and all the help from Family Mobile, T-Mobile, Straight Talk, Walmart and AT&T, have not helped my situation. I can't write a new APN and store it because I have an invalid SIM card. I have tried the service mode and did everything mention in these forums but no luck so far.
I really like the device(my NOT-Phone) but it does not function as a phone. Can anyone help with this one?
:crying:
gdeem01 said:
I have tried every code mentioned, in here, that was successful for others but not for me.
I started by buying my Galaxy S4, out right, at Walmart for use on Family Mobile. Poor signal everywhere except in my house. The phone has T-Mobile support as far as towers go. After about three weeks I had my phone number transferred to Straight Talk and they sent a SIM card for use with AT&T support. The phone was purchased as an unlocked phone, I did all the codes in this forum to check and sure enough, it is supposed to be unlocked, BUT, every SIM card I get from Straight Talk gives me "INVALID SIM CARD" when I boot up the phone then a black screen comes on with a subdued color message saying, "Sim network unlock PIN" and all the help from Family Mobile, T-Mobile, Straight Talk, Walmart and AT&T, have not helped my situation. I can't write a new APN and store it because I have an invalid SIM card. I have tried the service mode and did everything mention in these forums but no luck so far.
I really like the device(my NOT-Phone) but it does not function as a phone. Can anyone help with this one?
:crying:
Click to expand...
Click to collapse
No warranty in Walmart?!
If it connects to T-Mobile towers out of the box, can you borrow a T-Mobile SIM from soneone and go through the SIM unlock procedure? I'd do that just to make sure it's SIM unlocked. Then try Straight Talk with whatever APNs they use. Do this on stock and once you can confirm you get that far and it's working then go crazy. Good luck.
Locked SIM card
Daistaar said:
If it connects to T-Mobile towers out of the box, can you borrow a T-Mobile SIM from soneone and go through the SIM unlock procedure? I'd do that just to make sure it's SIM unlocked. Then try Straight Talk with whatever APNs they use. Do this on stock and once you can confirm you get that far and it's working then go crazy. Good luck.
Click to expand...
Click to collapse
If I put the original, 1st SIM (Family Mobile) that I bought, back in, I do not get the Unlock Sim code message but I also do not have service because I already had the number ported. I've been that route. I tried the APN routine but it won't save because I don't have service with that SIM card. I go into the unlock routine through the service mode and it says it's already unlocked. Any Sim card from Straight Talk gives me Invalid SIM.
I'm going to return it to Walmart and try another phone.
I have a SGH-I337 (AT&T) that I'm trying to get to work with a Verizon sim. I followed the steps in the post below.
http://forum.xda-developers.com/gal...aranteed-free-sim-unlock-mk2-nb1-nc1-t2852979
I follow the steps as stated but at the end the phone has no signal/loses signal using Verizon sim's.
Usually after a fresh boot, the phone will have bars but no data and cannot make calls. The phone states EMERGENCY CALLS ONLY at this point. After a few minutes the service bars will disappear and be replaced with a NO SERVICE indicator.
The phone no longer indicates an invalid sim, but does not auto load APN settings. Manually inputting the Verizon APN settings does not fix it either.
I have checked and it does NOT show the NULL IMEI on the *#06#. Also with the Verizon sim the hidden menus don't always function (*#0011# and such) although I've read that is an AT&T only thing, I'm not sure if that true.
When I insert an AT&T Sim it gets service/data immediately upon booting. I've also tried two different Verizon sim cards.
Thoughts or Suggestions? What am I missing?
VTAssault said:
I have a SGH-I337 (AT&T) that I'm trying to get to work with a Verizon sim. I followed the steps in the post below.
http://forum.xda-developers.com/gal...aranteed-free-sim-unlock-mk2-nb1-nc1-t2852979
I follow the steps as stated but at the end the phone has no signal/loses signal using Verizon sim's.
Usually after a fresh boot, the phone will have bars but no data and cannot make calls. The phone states EMERGENCY CALLS ONLY at this point. After a few minutes the service bars will disappear and be replaced with a NO SERVICE indicator.
The phone no longer indicates an invalid sim, but does not auto load APN settings. Manually inputting the Verizon APN settings does not fix it either.
I have checked and it does NOT show the NULL IMEI on the *#06#. Also with the Verizon sim the hidden menus don't always function (*#0011# and such) although I've read that is an AT&T only thing, I'm not sure if that true.
When I insert an AT&T Sim it gets service/data immediately upon booting. I've also tried two different Verizon sim cards.
Thoughts or Suggestions? What am I missing?
Click to expand...
Click to collapse
I don't own any Verizon phones myself, so I could be totally wrong but:
- Verizon's SIM cards are just for data.
- Verizon uses CDMA (Your subscriber identity is in the ESN/IMEI)
- AT&T uses GSM (Your subscriber identity is in the SIM)
Both networks require you to authenticate yourself with your subscriber identity before they will give you data access.
Sounds like Verizon doesn't have your IMEI, so the phone fails to authenticate/connect.
Try calling Verizon, tell them you got a new phone, and you would like to tell them the IMEI of the new one, so that it can connect to data services.
Either that or they need the number off the Verizon SIM
jdisco1 said:
I don't own any Verizon phones myself, so I could be totally wrong but:
- Verizon's SIM cards are just for data.
- Verizon uses CDMA (Your subscriber identity is in the ESN/IMEI)
- AT&T uses GSM (Your subscriber identity is in the SIM)
Both networks require you to authenticate yourself with your subscriber identity before they will give you data access.
Sounds like Verizon doesn't have your IMEI, so the phone fails to authenticate/connect.
Try calling Verizon, tell them you got a new phone, and you would like to tell them the IMEI of the new one, so that it can connect to data services.
Either that or they need the number off the Verizon SIM
Click to expand...
Click to collapse
I really do hope it's this simple. I'll try it tomorrow and let you know if it works.
I've never heard of a gsm phone working on cdma. Is it even possible?
Airtioteclint said:
I've never heard of a gsm phone working on cdma. Is it even possible?
Click to expand...
Click to collapse
Me neither, but maybe since its unlocked? Plus it has an IMEI for Verizon to use...
jdisco1 said:
Me neither, but maybe since its unlocked? Plus it has an IMEI for Verizon to use...
Click to expand...
Click to collapse
It should be able to work with CDMA. I've seen the option in some of the menu's I've been through. And the guides have all said that they can work between AT&T and Verizon/T-Mobile or vice versa.
Also, AT&T will unlock the phone for you if you go to their website and fill out the stuff. The only reason I didn't do this is because I'm still under contract and I would have to break that and pay the early termination fee.
I know this has other threads, but I wanted to post something that helped me get VoLTE working that none of the other threads addressed.
Quick background: new to TMobile, new to the 1+ brand. Rooted, stock. I could get LTE, but I kept getting kicked to roaming AT&T H+ or 3G, couldn't get VoLTE, and very slows speeds even when on LTE. Tried every APN combo, network settings reset, factory phone reset, tried every *#*#4636#*#* preferred network type...nothing. Chatted in to 1+ asking if I could speak to technical support. The response was the only way to fix it was to factory reset (which I had already done) and downgrade OOS. The newest OOS has the T-Mobile optimizations, so downgrading makes no sense! Needless to say, the whole 30 min chat was a waste of time and just a bunch of weak canned responses with no attempt to really help or figure out how to escalate me to someone with some knowledge of the APNs and settings needed.
Out of desperation, or since I had tried every other possible trick, I went under my T-Mobile SIM, Network Operators, and toggled Auto Choose and manually chose TMobile 4G.
Boom, full bands 4, 12 and VoLTE, and normal speeds! Carrier aggregation is even working sometimes.
I don't know why Auto Choose doesn't know how to grab 4G permanently, but everything is working!
Does anyone have any idea why this fixed it? Since I choose 4G, will I lose my ability to get 3G in rural areas? I don't feel like there was much info on how VoLTE is provisioned on the phone.
What's everyone's experience with the preferred network settings? I'm currently in LTE/UMTS, and I don't have the LTE/GSM option that apparently everyone else has...?
Also, does everyone else have as sporadic speeds as I do? One moment it'll be 40 down, next it'll be 6? I know it has to do with bands, but should there be a way to even that out a little?
Sidenote: I really like 1+ mentality about rooting and software, since I have to have a rooted phone, but this experience really soured my first impression. Plus their 1+5 is a major letdown to me. I don't think I'll purchase anymore 1+ products.
Feel free to correct any misinformation in my post.
I also have noticed when I try streaming, webpages or speedtests the little LTE+ carrier aggregation kicks in to combine band 4 and 12 and I get pretty good speeds. See screenshot
My speeds do definitely vary on Tmobiles network. Isn't an issue for me, everything streams fine, also i haven't had an issue with VOLTE since I got the phone in February..
I noticed when I'm in a roaming area, instead of roaming now, I completely lose service. I believe this is because I manually selected TMobile 4G as my operator instead of auto, which would allow the phone to jump to AT&T. Any ideas?
So still having problems, but only when traveling. If I have network operator on "auto" it'll select AT&T roaming, but then it'll just stick then and never switch back to TMobile, even in full strength band 4 or 12 areas. I have to reboot, and toggle auto for it to grab a T-Mobile signal. Very irritating. This also kicks the phone off VoLTE, and I've yet to get it back. Not sure if this is TMobile or the phone's fault. Tried everything I can think of. Any ideas?
izzyfanto said:
So still having problems, but only when traveling. If I have network operator on "auto" it'll select AT&T roaming, but then it'll just stick then and never switch back to TMobile, even in full strength band 4 or 12 areas. I have to reboot, and toggle auto for it to grab a T-Mobile signal. Very irritating. This also kicks the phone off VoLTE, and I've yet to get it back. Not sure if this is TMobile or the phone's fault. Tried everything I can think of. Any ideas?
Click to expand...
Click to collapse
Get a new SIM card
Lancez said:
Get a new SIM card
Click to expand...
Click to collapse
Excuse my ignorance, but what would a new SIM accomplish, technically speaking that is?
FYI, my wife's HTC 10 does the same thing. That would make two bad SIMs unlikely?
izzyfanto said:
Excuse my ignorance, but what would a new SIM accomplish, technically speaking that is?
FYI, my wife's HTC 10 does the same thing. That would make two bad SIMs unlikely?
Click to expand...
Click to collapse
I've had same problem as yours, I went to T-Mobile store and told them what was going on. They switched my SIM card and problem fixed. I was told because my SIM was too old (4 years at least) that's why i was having such issue.
Lancez said:
Get a new SIM card
Click to expand...
Click to collapse
Lancez said:
I've had same problem as yours, I went to T-Mobile store and told them what was going on. They switched my SIM card and problem fixed. I was told because my SIM was too old (4 years at least) that's why i was having such issue.
Click to expand...
Click to collapse
Gotcha thanks, I'll give it a try! What's weird is our SIMs are only weeks old....
izzyfanto said:
Gotcha thanks, I'll give it a try! What's weird is our SIMs are only weeks old....
Click to expand...
Click to collapse
That's what I've been thru and got fixed. Hopefully it'll work for you too
New SIM, no change
This phone has the features I want, and T-Mobile has the speeds I want, but this is frustrating to be kicked to roaming and no VoLTE....
izzyfanto said:
New SIM, no change
This phone has the features I want, and T-Mobile has the speeds I want, but this is frustrating to be kicked to roaming and no VoLTE....
Click to expand...
Click to collapse
Sorry to hear that it didn't work out for you. I attached couple of screenshots just to show you that it's been working good for me after I switched SIM card.
Edit: have you tried to create a new APN instead of using the default APN?
Edit 2: I can show you my APN if you want
Sorry, must have not been clear. I can get LTE, just not automatically after going into a roaming area. It just sticks on AT&T roaming until I manually go back in and select TMobile 4G. The problem with that is when I do need roaming to work, it won't because I have TMobile 4G manually selected.
Another problem is that I can't get VoLTE to stay very long, in fact i haven't had it for a couple days, despite me being in a very strong LTE area.
I appreciate your help
Edit: yes, if I could see your APN that'd be great!
izzyfanto said:
Sorry, must have not been clear. I can get LTE, just not automatically after going into a roaming area. It just sticks on AT&T roaming until I manually go back in and select TMobile 4G. The problem with that is when I do need roaming to work, it won't because I have TMobile 4G manually selected.
Another problem is that I can't get VoLTE to stay very long, in fact i haven't had it for a couple days, despite me being in a very strong LTE area.
I appreciate your help
Edit: yes, if I could see your APN that'd be great!
Click to expand...
Click to collapse
Just create a new APN exactly as mine and see if it works
Hmm yeah that's the one I have too....
Btw, maybe I just needed to wait,, but VoLTE is working again, and it's reporting the correct IMEI (it wasn't before but TMobile told me that wasn't a big deal...I beg to differ because now my TMobile app is working whereas before it wasn't) Fingers crossed the new SIM did the trick! I'll know tomorrow when I commute to work and it starts roaming whether it'll reacquire T-Mobile and VoLTE
Quick update: I definitely have noticed an improvement in jumping off AT&T roaming back onto TMobile LTE. AND VoLTE is now sticking. But... I'm inclined to think it's something related to me not having my second Verizon SIM in. I have a company work number on a Verizon SIM that enables me to text and call from that number. Obviously data doesn't work but that doesn't bother me since I have TMobile unlimited on my personal SIM. When I insert my Verizon SIM in the second slot, my IMEI number changes in the testing menu, but not my settings info! What the heck? The IMEI number identifies the phone and shouldn't change...I thought? Very confused why part of my phone retains the correct IMEI and the testing changes. I instantly lose VoLTE and my TMobile app fails to authenticate.
What is going on???
UPDATE:
I popped my Verizon SIM in again (slot 1) and it's reporting the xx...15 IMEI (correct one on my T-Mobile account) and the T-Mobile SIM (slot 2) then drops to xx...07! I'm so confused! I thought the IMEI is NOT supposed to change because it identifies the device?? The ICCID is the SIM number? Why is Verizon SIM screwing this up?
Anyone check to see if other gsm sim cards would work in the Verizon version of the moto e4?
Also will this verizon model work on Jio network (850 band available in this set) in India?
I can confirm it works with AT&T Freedompop GSM SIM after buying a $2 unlock code on ebay. Noted it picks up LTE bands 2,4,5,17. Band 5 is the 850 Mhz frequency.
Whyzor said:
I can confirm it works with AT&T Freedompop GSM SIM after buying a $2 unlock code on ebay. Noted it picks up LTE bands 2,4,5,17. Band 5 is the 850 Mhz frequency.
Click to expand...
Click to collapse
You able to place calls??
juggamonkey said:
You able to place calls??
Click to expand...
Click to collapse
I use T-Mobile and after buying the SIM unlock on eBay, I am able to use both voice and data.
That's crazy cricket doesn't allow voice calls for me .I ordered unlock code from eBay also
juggamonkey said:
That's crazy cricket doesn't allow voice calls for me .I ordered unlock code from eBay also
Click to expand...
Click to collapse
You may need to change the settings to use T-Mobile/GSM network or something like that. Some people mentioned it in the slickdeals forum:
https://slickdeals.net/f/10418732-verizon-moto-e4-prepaid-39-88-walmart
juggamonkey said:
That's crazy cricket doesn't allow voice calls for me .I ordered unlock code from eBay also
Click to expand...
Click to collapse
When I first inserted the cricket sim, it wont allow the voice calls. I switched the preferred network from 4g to 3g, the calls worked. Switched it back to 4g and they still work. Try doing this, it works..
EDIT: Remember, it switches from LTE to 3G when making the calls. I got the unlock code from ebay for $2.09.
cyclops13 said:
When I first inserted the cricket sim, it wont allow the voice calls. I switched the preferred network from 4g to 3g, the calls worked. Switched it back to 4g and they still work. Try doing this, it works..
EDIT: Remember, it switches from LTE to 3G when making the calls. I got the unlock code from ebay for $2.09.
Click to expand...
Click to collapse
Hey thanks ! That worked
so, 100% sure that it works to make calls, data and sms when try unlock code from ebay? is yes, i´ll buy one to try in México
I unlocked mine with a code off eBay. I am currently using it on Cricket(At&t). Everything is working fine..data, calls, texts, MMS. Just had to find the correct APN settings. From my understanding...it should be usable on Sprint/Boost but who would want to.
Hi, anyone know how to dial special numbers like *611 or *264 when your using another sim (from other carrier, nota Verizon) ? Because im trying but always appear +1 simbol before i dial
My friend bought the Verizon prepaid version and isn't able to connect to many WiFi networks, like the airport ones (he tried in a couple different airports and none worked), any ideas how to fix that?
I unlocked my verizon E4 through ebay and checked it works with Jio in Mumbai -
4G was working without setting up the APN - just put the sim
I unlocked mine for $2 on ebay and my at&t sim works. sms does have a slight delay sending at times but lte and calls work.
This might sound like a stupid question, but this could be used with a Verizon post-paid SIM, correct? My son has the HTC 10 and it got dropped in water but he is away at school. He should be able to just run to Target, grab one for $40, and take that nano SIM out of his bad HTC 10 and pop it in the Verizon Pre-paid Moto E4 and that's it, correct? No need to call Verizon or anything?
acejavelin said:
This might sound like a stupid question, but this could be used with a Verizon post-paid SIM, correct? My son has the HTC 10 and it got dropped in water but he is away at school. He should be able to just run to Target, grab one for $40, and take that nano SIM out of his bad HTC 10 and pop it in the Verizon Pre-paid Moto E4 and that's it, correct? No need to call Verizon or anything?
Click to expand...
Click to collapse
I believe that is correct from what I've read here.
Supposedly, already activated Verizon post-paid sims are good to go. It's when you try to activate the Verizon prepaid phone that you run into problems because the prepaid IMEI is NOT whitelisted. Of course, 'm only repeating what I've read. I don't use Verizon, so YMMV.
acejavelin said:
This might sound like a stupid question, but this could be used with a Verizon post-paid SIM, correct? My son has the HTC 10 and it got dropped in water but he is away at school. He should be able to just run to Target, grab one for $40, and take that nano SIM out of his bad HTC 10 and pop it in the Verizon Pre-paid Moto E4 and that's it, correct? No need to call Verizon or anything?
Click to expand...
Click to collapse
Also not a Verizon user here, but as I understand it, putting postpaid VZW sim in a prepaid device that hasn't been active on a prepaid account will result in a lock being put on your postpaid account. This will necessitate a call to VZW customer service to 'reactivate' the account - no calls messages or data until you make that call (from another line)
This is what I recall from discussion around similar use case in the Moto e 2015 forums. Ymmv.
dandrumheller said:
Also not a Verizon user here, but as I understand it, putting postpaid VZW sim in a prepaid device that hasn't been active on a prepaid account will result in a lock being put on your postpaid account. This will necessitate a call to VZW customer service to 'reactivate' the account - no calls messages or data until you make that call (from another line)
This is what I recall from discussion around similar use case in the Moto e 2015 forums. Ymmv.
Click to expand...
Click to collapse
Hmm... That could be a problem, at least in the short term, but he was able to come up with a Verizon LG G2 and popped his SIM in and it worked. A couple days in rice may help, but I have my doubts.
In the mean time, since Target had these on sale for $39.99, I picked one up (my local store had about a dozen in stock) in case the phone is dead and he decides not to get it repaired under the service agreement by paying the deductible (which is $150 I think). Not going to open it for the time being, but will see what happens as time goes on.
I am a little concerned when you say "will result in a lock being put on your postpaid account", since this account has 3 lines in it and neither of us is the account holder. :/ To you have a link back to that information?
I read that they freeze your account and won't let it work with the prepaid phone (on Slickdeals)