Related
I just started using nightly CM 10 builds (at the moment Dec 1 build which puts my cpu at 90+ % boo) and didn't find the linked changelog from the developer thread
CHANGELOG.mkdn
very helpful at all regarding what's changed between builds.
in case it's helpful to someone else who doesn't know about it, here's one that is helpful that I dug up
changelog DOT bbqdroid DOT org/#p1c/cm10/next
yes you have to assemble the link yourself sorry.
cheers
Try BBQTools app. Shows daily changelog (device specific) and even allows flashing of new dailies through the app itself.
https://play.google.com/store/apps/...d.bbqtools&feature=more_from_developer#?t=W10.
/*
Usual Disclaimer: This is an untested compiled ROM. Expect nothing to work.
Dev/test team is not responsible for any bricked devices, wars or terrorist attacks because of the usage of this ROM.
All credits goes to:
- CyanogenMod team
- Brave heart people who will flash, test and report bugs
- Additional developers who will help with solving issues and adding features
*/
I have been finally able to compile CM12.1 for our beloved device. This compilation is pure unadulterated 12.1. The ROM is NOT TESTED AT ALL. EXPECT NOTHING 2 WORK!
All other goodies including screenshots, enhancements, etc. will follow.
Help needed for:
- Flashing, testing and putting out bug reports
- Providing solutions and re-basing to latest CM releases
XDA:DevDB Information
UNOFFICIAL CM12.1 Find5 ROM, ROM for the Oppo Find 5
Contributors
wolverine2k
Source Code: https://github.com/CyanogenMod/android
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Oppo Find5 Phone and a BRAVE HEART!
Based On: Pure Unadulterated CyanogenMod
Version Information
Status: No Longer Updated
Created 2015-07-14
Last Updated 2016-04-23
Reserved
FAQs:
Q: How do I flash the ROM?
A: Any recovery allowing ROM flashing should work. I am using OpenRecovery though.
Coming from Previous Version or if you want a dirty install:
1. boot into recovery
2. flash the Rom
3. reboot
Coming from Previous Version and if you want a clean install:
1. boot into recovery
2. do a full wife
3. flash the Rom
4. reboot
Coming from Any Other ROM:
1. Boot into Recovery
2. Do a full wife (format date, sysyem, preload & cache is the best)
3. Flash ROM
4. Flash Additional GAPPS if you want (GAPPS for 12.1 --> Slim_mini_gapps.BETA.5.1.build.0.x-20150812.zip)
5. Reboot
6. Don't restore system stuff or apps + data using Titanium, it might cause issues
Reserved
where I can download the rom to test ... ???
x1123 said:
where I can download the rom to test ... ???
Click to expand...
Click to collapse
Updated the main thread with the download link (http://forum.xda-developers.com/devdb/project/dl/?id=13745&task=get).
Cheers
no other info about what is working and whatnot?
Even you did not install it on your device? :angel:
grimpressive said:
no other info about what is working and whatnot?
Even you did not install it on your device? :angel:
Click to expand...
Click to collapse
Modified some kernel parameters to get the build working. Haven't been able to test everything but most of all should be working. The updated build is posted. Initial screenshots attached.
Greatly Improved Build: 29th July, 2015
Dear All,
There is a new CM12.1 build available which works pretty good. All CM 12.1 Features and Bugs apply. Can be used on a normal Device.
Status Updated to Release build.
Download from: http://forum.xda-developers.com/devdb/project/dl/?id=13787&task=get
Cheers,
wolverine2k said:
Dear All,
There is a new CM12.1 build available which works pretty good. All CM 12.1 Features and Bugs apply. Can be used on a normal Device.
Status Updated to Release build.
Download from: http://forum.xda-developers.com/devdb/project/dl/?id=13787&task=get
Cheers,
Click to expand...
Click to collapse
Hi, Ive just flashed this rom on my find5. Everthing work ok but sim. My mobile cannot regconize my sim so I cannot make a call. It says im on flight mode. I had already wiped all before flashing rom but no better. Do you have any idea about this issue.
Thanks
-
selphien said:
Hi, Ive just flashed this rom on my find5. Everthing work ok but sim. My mobile cannot regconize my sim so I cannot make a call. It says im on flight mode. I had already wiped all before flashing rom but no better. Do you have any idea about this issue.
Thanks
-
Click to expand...
Click to collapse
Uploaded a new build (UNOFFICIAL_cm_find5-20150807.zip). Please flash this one. I have now made 2 radio properties persistent which allows for delayed SIM card detection and restarts RIL if needed. See the updated screenshots which shows the radio signal strength.
Cheers.
Bugreport and Working CM12 setup that works on my find 5...
wolverine2k said:
New Build: 7th August 2015. New screenshots.
Fixes:
- Radio working again (2 radio property edits in build.prop).
/*
Usual Disclaimer:
Dev/test team is not responsible for any bricked devices, wars or terrorist attacks because of the usage of this ROM.
All credits goes to:
- CyanogenMod team
- Brave heart people who will flash, test and report bugs
- Additional developers who will help with solving issues and adding features
*/
I have been finally able to compile CM12.1 for our beloved device. This compilation is pure unadulterated 12.1. Most of the things should work!
Post your bugs/issues in this thread. Also attach logcat or kernel logs if possible. Any & all help is greatly appreciated.
All other goodies including screenshots, enhancements, etc. will follow.
Help needed for:
- Flashing, testing and putting out bug reports
- Providing solutions and re-basing to latest CM releases
XDA:DevDB Information
UNOFFICIAL CM12.1 Find5 ROM, ROM for the Oppo Find 5
Contributors
wolverine2k
Source Code: https://github.com/CyanogenMod/android
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Oppo Find5 Phone
Based On: Pure Unadulterated CyanogenMod
Version Information
Status: Stable
Created 2015-07-14
Last Updated 2015-08-07
Download Link http://forum.xda-developers.com/devdb/project/dl/?id=13870&task=get
Screenshots
Click to expand...
Click to collapse
Hi I'm new here on XDA so if my postings are messed up.... you'll know why:good:
I just tried flashing this rom and I can report that gapps dosn't work or at least gives an error that some functions do not work.
I then tried flashing an updated gapps 5.1 but same error here.... I gues its more a gapps thing than the rom itself.
I couldn't find other errors that, and it seems very stable :good:
My current setup that works is this:
cm-12-20150802-NIGHTLY-find5
gapps-5.0.x-20150404-minimal-edition-signed
apoulsen said:
Hi I'm new here on XDA so if my postings are messed up.... you'll know why:good:
I just tried flashing this rom and I can report that gapps dosn't work or at least gives an error that some functions do not work.
I then tried flashing an updated gapps 5.1 but same error here.... I gues its more a gapps thing than the rom itself.
I couldn't find other errors that, and it seems very stable :good:
My current setup that works is this:
cm-12-20150802-NIGHTLY-find5
gapps-5.0.x-20150404-minimal-edition-signed
Click to expand...
Click to collapse
You are using the wrong GAPPS. Please use the one for 5.1.1. I am using https://www.androidfilehost.com/?fid=24052804347792592
Post your results back. If you still have problems, attach the logcat for the same.
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Does not work the proximity sensor during call, but the sensor good works at tests. How it can be corrected. thanks
I hope "oppo camera" transfer to this roms.
Zerguz said:
Does not work the proximity sensor during call, but the sensor good works at tests. How it can be corrected. thanks
Click to expand...
Click to collapse
I will look into this in more details. Meanwhile, if you can get the logcat log attached, it would help me a lot.
boynareta said:
I hope "oppo camera" transfer to this roms.
Click to expand...
Click to collapse
Do you have the link to this "oppo camera" you are referring to? Is it the default in the latest Color OS?
simon2bb said:
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Click to expand...
Click to collapse
This works good on my mobile. Can you send me the logcat logs for both radio and main buffers?
http://0fa8391b.dl-one2up.com/onetwo/content/2015/10/7/0fa8391bffee21e1110d96a9f2ce77a7.apk - OPPOcamera
http://2d245e84.dl-one2up.com/onetwo/content/2015/10/7/2d245e84f6821eb264f4841be9d552a0.apk - OPPOgallery2
simon2bb said:
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Click to expand...
Click to collapse
Like in the official cm12 - I use it. After u turn off wifi go to mobil network settings, select apn-s, open the actual settings and just simply do a save on it. And viola the Mobil internet starting.
Hello Guys,
These are my Unofficial builds of MetalliumOS for Find5
Spike Laboratory - Metallium
ABOUT Spike Laboratory - Metallium
Spike Laboratory - Metallium >>SPLM is an after market firmware based latest "Android Lolly-Pop 5.X.X. This firmware is designed By Spike Laboratory .This firmware suits specially for those people who like,Multitasking performance,optimum speed. In-addition to This the firmware has Inbuilt options and settings to make customization of your Device the way you like.
Features , changelogs and screenshots can be found on Spike Laboratory - WEB
SUPPORT FOR SPLM RELATED ISSUES :
We spend an astonishing amount of time developing this firmware.
We can't spend much time on XDA as a result, so if you need support, please try the following:
Ask a question in your device forum in XDA. Someone will no doubt try to help you.
Our device maintainers are going to help you so pm them.
Any bugs or any other issues report to the device maintainers.
If you want to contribute or join to the device maintainer team contact either team leaders or device maintainers.
We expect that users help each other, well xda is a ll about it.
OFFICIAL LINKS & INFORMATIONS :
Official Web-Page
SPLM ROMS
Recommanded gapps
DOWNLOADS
(Please do not mirror Download links or Mention Link in any of your posts )
INSTALLATION STEPS:
Minimum Requirements To Install SPLM:
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
Recommended Custom Recovery TWRP : Click Here to View TWRP Offical supported devices
Installation Procedure:
(A)If you are making a Fresh Installation(or coming from any other rom other than SPLM) :
Boot Into Recovery Mode
Wipe Data,System,Cache,Dalvik
Flash provide latest SPLM ROM Zip
Again Wipe Cache and Dalvik
Reboot To System
Now again Reboot into Recovery Mode
Flash latest G-Apps
Wipe Cache and Dalvik....and Reboot To System.
Have always this zip in your sd in case od sim unlock issue Find5 is exeperiencing since Lollipop, just flash it in recovery if needed.
Click to expand...
Click to collapse
(B)If you are already Running SPLM Rom But you want to update with latest version:
Boot Into Recovery Mode
Flash provided Updates of SPLM ROM(latest weekly)
Again Wipe Cache and Dalvik
Reboot To System.
Click to expand...
Click to collapse
SOURCE:
SPLM ROM SOURCE
SPLM DEVICES SOURCE
Kernel Sources
CREDITS:
ALL SPLM team
CM
AOSPA-L
SlimRom
CrDroid
DU
Omnirom
Click to expand...
Click to collapse
WHO ARE WE AND WHAT ARE WE DOING?:
TEAM SPIKE LABORATORY
XDAevDB Information
Metallium OS, ROM for the Oppo Find 7
Contributors
Schneiderle, a1krab
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-09-14
Created 2015-09-14
Last Updated 2015-09-15
reserved
reserved
New build
Hello Guys,
First release is available :
metallium_find5-1.0-20150914.zip
Download:
https://www.androidfilehost.com/?fid=24052804347815860
Next builds will have changelog.
Enjoy & Cheers
jejecule said:
Hello Guys,
First release is available :
metallium_find5-1.0-20150914.zip
Download:
https://www.androidfilehost.com/?fid=24052804347815860
Next builds will have changelog.
Enjoy & Cheers
Click to expand...
Click to collapse
Feedback are really appreciated
Sent from my Nexus 6 using XDA Free mobile app
New build Metallium
Hello new build is up: see op download link to basketbuild or normal way: https://www.androidfilehost.com/?fid=24052804347817647
Cheers
Here comes the feedback:
- Autorotation doesnt work. Maybe kernel related.
- Some lag and instability but this could very (most definitely) well be the bidji kernel. (Havent tested on stock kernel)
- Everything else works fine.
- Betterylife is fine, nothing crazy.
- Botton backlight works
Will test tomorrow with stock kernel a few minutes to confirm sone issues maybe. But I like the battery life of bidji kernel too much to not use it.
What does this rom do different compared to other cm like roms? I couldnt really find any major pros or cons. Just very cm like but not from cm I guess. I really hate that they have edited the default launcher with their own ugly app drawer icon and removed the launcher options. Luckily we have an appstore with other launchers. I will change rom to DU again probably because of the auto rotate (but button backlight doesnt work there if i recall correctly).
Still really loving all your builds to test compare and tinker with. And the new bidji kernel makes the tinkering and fiddling even more interesting . Hope this feedback helps.
Verstuurd vanaf mijn Find 5 met Tapatalk
boertjeg said:
Here comes the feedback:
- Autorotation doesnt work. Maybe kernel related.
- Some lag and instability but this could very (most definitely) well be the bidji kernel. (Havent tested on stock kernel)
- Everything else works fine.
- Betterylife is fine, nothing crazy.
- Botton backlight works
Will test tomorrow with stock kernel a few minutes to confirm sone issues maybe. But I like the battery life of bidji kernel too much to not use it.
What does this rom do different compared to other cm like roms? I couldnt really find any major pros or cons. Just very cm like but not from cm I guess. I really hate that they have edited the default launcher with their own ugly app drawer icon and removed the launcher options. Luckily we have an appstore with other launchers. I will change rom to DU again probably because of the auto rotate (but button backlight doesnt work there if i recall correctly).
Still really loving all your builds to test compare and tinker with. And the new bidji kernel makes the tinkering and fiddling even more interesting . Hope this feedback helps.
Verstuurd vanaf mijn Find 5 met Tapatalk
Click to expand...
Click to collapse
Ik dank je voor uw feedback!
Autorotation: well still a mistery only DU is working, kernel is the same, so frameworks must be the culprit.
For the rest, I just jump into this project cause I found it interesting and different from others but i'm slowly think I was wrong.
Anyway,yes it not cm but device trees are so, bugs will remain mainly the same .
To be honest, not sure I'll keep on long time with this one except if users are happy
At least om my AFH I have some 30 downloads, in their basketbuild, 0...
Een prettige end of weekend!
Jeje
Sent from my Nexus 6 using XDA Free mobile app
(I lolled a bit because of you typing Dutch )
Tested again on stock kernel, same issues as before with auto rotate. Something to add why this is different compared to other roms: it is not so much in options but everything that is there is done well. Like all icons and stuff are all good and done and there are no wierd looking menus. So it is a very slick experience IMHO (except the boot logo ugh).
Cheers
Hello Guys,
With Metallium team members, we decided to make those builds "unofficials". This won't change anything for you, builds with remain the same with same quality and improve progressively.
This is a good team and i'm proud to build for them, last post from my dutch mate proves it.
Reasons why this change: i prefer to keep my liberty, to build myself, to post my builds where i used to post it, and so on. Furthermore, i'm official member of crDroid team and it takes me lot of time, and i want to keep the same quality for them too.
So expect new Metallium build at least weekly.
I wish you a nice evening.
Cheers,
Any signs of lvm support on the ROM?
Sent from my X9076 using Tapatalk
New Find5 Metallium
piyush7243 said:
Any signs of lvm support on the ROM?
Sent from my X9076 using Tapatalk
Click to expand...
Click to collapse
Only one chinese mate is doing it without publishing his sources, so really difficult.
By the way: new build is up: metallium_find5-1.0-20150921.zip
Download: https://www.androidfilehost.com/?fid=24052804347820446
Cheers
jejecule said:
Only one chinese mate is doing it without publishing his sources, so really difficult.
By the way: new build is up: metallium_find5-1.0-20150921.zip
Download: https://www.androidfilehost.com/?fid=24052804347820446
Cheers
Click to expand...
Click to collapse
I think the sources are here
https://github.com/feelingfree-me/android_device_oppo_apq8064-common/tree/5.1.1-lvm
Sent from my X9076 using Tapatalk
piyush7243 said:
I think the sources are here
https://github.com/feelingfree-me/android_device_oppo_apq8064-common/tree/5.1.1-lvm
Sent from my X9076 using Tapatalk
Click to expand...
Click to collapse
i will check then guys!
I suppose some special twrp are required too?
Cheers
There you go. This is support LVM
https://www.androidfilehost.com/?fid=24052804347760547
piyush7243 said:
There you go. This is support LVM
https://www.androidfilehost.com/?fid=24052804347760547
Click to expand...
Click to collapse
Thanks mate, appreciated, i will try a build today, hope you'll test it, don't worry i'll test it first
Cheers
The TWRP works fine and can unify the storage. The CM build posted on the oppo forums seems to work no worse than any other CM-derived rom. An LVM aware build of Dirty Unicorns would be awesome. I'm happy to test things because my Find 5 isn't my primary device anymore so I don't rely on it.
jejecule said:
Thanks mate, appreciated, i will try a build today, hope you'll test it, don't worry i'll test it first
Cheers
Click to expand...
Click to collapse
I am already running a CM version having LVM and its good apart from Auto rotate which seems to be a bug in CM12.
But another ROM with proper support would be awesome and feel free to get back to me to test the same
P.S: enabling selinux enforce by default seems to be a but flaky
piyush7243 said:
I am already running a CM version having LVM and its good apart from Auto rotate which seems to be a bug in CM12.
But another ROM with proper support would be awesome and feel free to get back to me to test the same
P.S: enabling selinux enforce by default seems to be a but flaky
Click to expand...
Click to collapse
Unfortunately, CM12 has the autorotate issue in all my builds except DU. So what i propose is, first make a test on metallium to see if LVM works then try to adapt to DU, new DU version should come within one day or two.
Thanks for your support.
Cheers
Guys,
If you wanna test a lvm compatible build: go there: metallium_find5-1.0-20150923.zip
https://www.androidfilehost.com/?fid=24052804347821013
Cheers
I'm here to question the device owner. There are few sources around about this device. They are raw and they are as common always experimental. Does anyone need them?
Furthermore, I can sum up here any sources I or other get to find about this device or its periphery.
If you are eager to Void your Warranty please Mind and Acknowledge that every modification only affects you and your contract and noone else.
custom rom
http://forum.xda-developers.com/xperia-xa/development/f3112-f3116-cyanogemod-13-project-t3488890
Silversniper said:
I'm here to question the device owner. There are few sources around about this device. They are raw and they are as common always experimental. Does anyone need them?
Furthermore, I can sum up here any sources I or other get to find about this device or its periphery.
Click to expand...
Click to collapse
Very good thing, I'm trying to build a CM13 rom from sources and I'm not sure if I have all required sources. For now I have, kernel sources with some "vendor" files from Sony and I found all build parameters like offsets/adresses and correct cmdline (no thanks to Sony because never released or mentioned them), the device tree dumped from my device, and I will dump the vendor tree too.
Now I need the defconfig for CM (very not sure if the stock one will work) , and some files like the boardconfig and some config files. I'm using the Elephone P9000 sources for sample, almost the same device (hardware side) and source files.
If I have some time I will try to upload files to git but I never tried before (sync only)...
rrvuhpg said:
Very good thing, I'm trying to build a CM13 rom from sources and I'm not sure if I have all required sources. For now I have, kernel sources with some "vendor" files from Sony and I found all build parameters like offsets/adresses and correct cmdline (no thanks to Sony because never released or mentioned them), the device tree dumped from my device, and I will dump the vendor tree too.
Now I need the defconfig for CM (very not sure if the stock one will work) , and some files like the boardconfig and some config files. I'm using the Elephone P9000 sources for sample, almost the same device (hardware side) and source files.
If I have some time I will try to upload files to git but I never tried before (sync only)...
Click to expand...
Click to collapse
Don't need to hesitate. I'll try to put the directions I've gathered here up today so it is done.
I finished to upload my files to Github:
https://github.com/rrvuhpg
You will find the device, kernel and vendor files to build CM13 for F3112/F3116. For now it will not work, it's just to share and help. I successfully built and booted the Cyanogen recovery with the kernel from sources, the doors for porting new roms are open?? :fingers-crossed:
My next step is to finish the device tree, verify the vendor tree and build the rom
rrvuhpg said:
I finished to upload my files to Github:
https://github.com/rrvuhpg
You will find the device, kernel and vendor files to build CM13 for F3112/F3116. For now it will not work, it's just to share and help. I successfully built and booted the Cyanogen recovery with the kernel from sources, the doors for porting new roms are open?? :fingers-crossed:
My next step is to finish the device tree, verify the vendor tree and build the rom
Click to expand...
Click to collapse
cool.. if work I would like to have it on my f3111 !!
rrvuhpg said:
I finished to upload my files to Github:
https://github.com/rrvuhpg
You will find the device, kernel and vendor files to build CM13 for F3112/F3116. For now it will not work, it's just to share and help. I successfully built and booted the Cyanogen recovery with the kernel from sources, the doors for porting new roms are open?? :fingers-crossed:
My next step is to finish the device tree, verify the vendor tree and build the rom
Click to expand...
Click to collapse
Can you publish some brief preview?
Need to say the sources I had just seem to be down, so can't share them.
Through which Program are these to flash? If you're that far I can hold a look at it and may join in your development.
Verification of the Vendor Files is something I was not very good at it, not even a yolk I managed.
Silversniper said:
Can you publish some brief preview?
Need to say the sources I had just seem to be down, so can't share them.
Through which Program are these to flash? If you're that far I can hold a look at it and may join in your development.
Verification of the Vendor Files is something I was not very good at it, not even a yolk I managed.
Click to expand...
Click to collapse
For now the only preview I can publish are the CM13 boot and recovery "as is", I'm not sure if it can help but I will release them if someone want to port others MTK Roms on XA. ( Never booted any ported rom with the stock kernel, stuck at Sony logo)
Flashing is easy: the recovery with fastboot and Rom/boot in a single flashable zip on the SD.
The kernel sources are coming from 33.2.B.2.95 open source archive from Sony but built from the lastest CM13 and Google git sources.
The vendor tree from 33.2.B.2.93 dumped from my phone, only common files with the P9000 are on my git for now.
The device tree from P9000 sources (from @Deepflex git) but seem OK.
CM13 have Android 6.0.1, I don't know if the security patch is the last one but August for sure.
I'm not so far from a finished build (not mean fully bootable), for now I successfully build a full CM13 for the Elephone P9000 (the twin of the XA, I'm using it as base). It mean my "kitchen" is working Now I'm trying to identify the last proprietary files from all others stock/cm13 libs, modify make files and cross my fingers it will fully build without errors.
You can join me no problem all people are welcome because I can't do all alone
rrvuhpg said:
For now the only preview I can publish are the CM13 boot and recovery "as is", I'm not sure if it can help but I will release them if someone want to port others MTK Roms on XA. ( Never booted any ported rom with the stock kernel, stuck at Sony logo)
Flashing is easy: the recovery with fastboot and Rom/boot in a single flashable zip on the SD.
The kernel sources are coming from 33.2.B.2.95 open source archive from Sony but built from the lastest CM13 and Google git sources.
The vendor tree from 33.2.B.2.93 dumped from my phone, only common files with the P9000 are on my git for now.
The device tree from P9000 sources (from @Deepflex git) but seem OK.
CM13 have Android 6.0.1, I don't know if the security patch is the last one but August for sure.
I'm not so far from a finished build (not mean fully bootable), for now I successfully build a full CM13 for the Elephone P9000 (the twin of the XA, I'm using it as base). It mean my "kitchen" is working Now I'm trying to identify the last proprietary files from all others stock/cm13 libs, modify make files and cross my fingers it will fully build without errors.
You can join me no problem all people are welcome because I can't do all alone
Click to expand...
Click to collapse
good work , but I am noob to create rom with kitchen .. only zip edit I know
Yesterday I successfully built CM13 for XA from sources
But news are not good, the CM recovery is fully working as expected but the rom is stuck just after the Sony logo (Mediatek screen with "loading...") like on my previous attempts to port other roms. The kernel built from CM kitchen do the same... I will upload my git and my rom to see if someone have an idea on the problem. Now I will focus on the "vendor" files, but I'm not sure if it's the real problem. Can it be a locked preloader/kernel or something like that?
EDIT: I think the boot problem is related to the defconfig file from Sony kernel sources, I will try to change some settings. (the door for adding kernel features :good
rrvuhpg said:
Yesterday I successfully built CM13 for XA from sources
But news are not good, the CM recovery is fully working as expected but the rom is stuck just after the Sony logo (Mediatek screen with "loading...") like on my previous attempts to port other roms. The kernel built from CM kitchen do the same... I will upload my git and my rom to see if someone have an idea on the problem. Now I will focus on the "vendor" files, but I'm not sure if it's the real problem. Can it be a locked preloader/kernel or something like that?
EDIT: I think the boot problem is related to the defconfig file from Sony kernel sources, I will try to change some settings. (the door for adding kernel features :good
Click to expand...
Click to collapse
Love you!
I will buy this phone thanks to you :highfive:
Thank you for your work on our phone, it's very cool.
I would have helped if i could develop myself. If you need help get in touch with me i know some great devs who could maybe help you
any news @rrvuhpg ?
Yes I have some news but I want to create a dedicated thread for the CM13 project with updates, explanations and downloads to avoid off topic here. I am on holiday on next week and I will have time to work on it and give explanations. For now I'm stuck on boot because of Sony extra settings in the boot process, it's the first time I see a bootstrap and TA partition mount on a MTK device. If you know a dev for helping me passing the Sony part in the boot init it can be great :angel:
Other thing, I updated my git with parts of the update made by @Deepflex on the P9000 sources and my recent changes.
rrvuhpg said:
Yes I have some news but I want to create a dedicated thread for the CM13 project with updates, explanations and downloads to avoid off topic here. I am on holiday on next week and I will have time to work on it and give explanations. For now I'm stuck on boot because of Sony extra settings in the boot process, it's the first time I see a bootstrap and TA partition mount on a MTK device. If you know a dev for helping me passing the Sony part in the boot init it can be great :angel:
Other thing, I updated my git with parts of the update made by @Deepflex on the P9000 sources and my recent changes.
Click to expand...
Click to collapse
sorry first time I use sony ... I wish you to have nice holiday !
LineageOS for OnePlus3
Hi,
I'm offering unmodified LineageOS nightlies for our device. The builds should be online at around 4:00AM (UTC +1) everyday.
If you want a pure LineageOS experience you should probably give it a try. These builds dont have open beta blobs, oxygen firmwares or anything else included. You are free to flash firmware and modem though, I'm using Oxygen 4.0.1 firmware and modem and its working fine.
I'm not a developer and I won't fix any bugs. If there is a bug, wait for LineageOS team to fix it.
Changelog:
https://www.cmxlog.com/14.1/
Download:
http://webzukunft.de/lineageos/
Status:
OFFICIAL LINEAGEOS DOWNLOADS ARE ONLINE, I WONT POST ANY UPDATES HERE BUT YOU MAY FIND NIGHTLIES UNDER THE GIVEN LINK.
How to install?
1. Reboot to TWRP (I recommend using official twrp 3.0.3)
2. Wipe System, Cache and Dalvik
3. Flash ROM
4. Flash GAPPS (I recommend opengapps)
5. Reboot
Sources:
Kernel Tree
Device Tree
Code Review:
LineageOS Gerrit
Credits:
LineageOS Team
Contributors:
oelf
hutilicious
There is already a thread for lineageOS nightlys: https://forum.xda-developers.com/oneplus-3/development/rom-lineageos-oneplus3-t3528972
I think we don't need two of them
panther124 said:
There is already a thread for lineageOS nightlys: https://forum.xda-developers.com/oneplus-3/development/rom-lineageos-oneplus3-t3528972
I think we don't need two of them
Click to expand...
Click to collapse
This guy offers no up-to-date nightlies and MEGA is not everyone's choice to download from. Choose whats best for you.
Hi guys,
todays nightly is up and tested and running
Ive tweaked the build system so that nightlies are now available at 04:00AM (UTC +1)
have a good day
Dirty flashed without problems.
Only issue I have since weeks (with every rom) is that my camera is not working 100%. Either doesn't take pictures at all/ force closes or you have to trigger 3-5 times before a picture is taking
hoqpus said:
Dirty flashed without problems.
Only issue I have since weeks (with every rom) is that my camera is not working 100%. Either doesn't take pictures at all/ force closes or you have to trigger 3-5 times before a picture is taking
Click to expand...
Click to collapse
hi, Im facing the same issue. its not related to my build and seems to be a general custom rom 7.1.1 problem. thanks for your report.
Thanks for the build. Unfortunately with the latest 2 builds (16./17.1.) inbuild root is not working for me anymore.
Achi92131 said:
Thanks for the build. Unfortunately with the latest 2 builds (16./17.1.) inbuild root is not working for me anymore.
Click to expand...
Click to collapse
Hi, thanks for noticing. I didnt notice it but you are right.
Option is missing in developer settings, too.
You can try flashing SuperSU zip to retain root again! Make sure to check changelogs, so you know if this has been fixed.
Apart from that, 20170117 is up,tested and running.
EDIT:
Ive checked the changes and it seems that LineageOS disabled SU extension by default. Builds can still be made with SU but it has to be done by the device maintainer. They said they are working on an SU extension for Lineageos.
For the time being, you have to flash SuperSU.
Thx for your hard work ... No one is updating .. this ROM on daily basis ... Except you ...
Any differences between this builds and Dianlujitao builds?
Flamehell said:
Any differences between this builds and Dianlujitao builds?
Click to expand...
Click to collapse
I actually cant tell if there is any difference. This rom is build from LineageOS official github source only. I think dianlujitao uses unmerged commits in his builds sometimes. Choose whats working best for you.
SU is back
Hi guys,
As there wasnt anyone voting for no root, I decided to build this rom with SU now. So any builds starting from 2016-01-25 are with SU. Enjoy root everyone!
Update:
Due to unexpected syncing errors some latest commits are missing in todays 2016-01-25 nightly. Ive fixed the issues and running a build now. Please check for a new 2016-01-25.zip later that day. Sorry for any inconveniences.