So yesterday I was playing Angry Birds space on my tablet running AOKP Milestone 6 with TWRP. The game started lagging like no other so I exited the game, Got to my home screen and it was locked up. Hit the reset button and it wasn't booting, stating that was loading the kernel, I loaded into TWRP, and it wasn't seeing anything on my SD Card so I decied to just do a rollback using Timmydeans root 3.2.1 downgrade, and whenever I run the EUU i just stops during it the restore
http://forum.xda-developers.com/showthread.php?t=1307539
I tried running this in the Image folder in the timmydean download
nvflash --bct flash.bct --setbct --odmdata 0x100c0105 --configfile flash.cfg --create --bl bootloader.bin --sbk 0xD19C1E00 0x68B3E601 0x87FA0203 0x45312103 --go
I get the following message
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x037c620442e124d7
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0x100c0105
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714385/714385 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: specified partition is invalid or does not exist (code: 7) me
ssage: nverror:0x42008 (0x6042008) flags: 0
I also tried running the V8-UNL-ICS-HC-bootloader-MULTI-cwm with v8.bat and v8.bat
I need help on getting me back working.
Theres something bad with the partitions on your internal sd.
Download Bad Sector from my Dropbox: http://db.tt/won7nZlr
In apx mode run a501a.bat. when finished, reboot and go in recovery. Format system partition 3 times. Go back in apx mode. Run a501b.bat. when finished, you are on unlocked ics bootloader v8 and cwm 1.7.3. Boot in recovery and flash the ics rom you like.
Gesendet von meinem Iconia A501 mit Tapatalk 2
VelosCohagen said:
Theres something bad with the partitions on your internal sd.
Download Bad Sector from my Dropbox: http://db.tt/won7nZlr
In apx mode run a501a.bat. when finished, reboot and go in recovery. Format system partition 3 times. Go back in apx mode. Run a501b.bat. when finished, you are on unlocked ics bootloader v8 and cwm 1.7.3. Boot in recovery and flash the ics rom you like.
Gesendet von meinem Iconia A501 mit Tapatalk 2
Click to expand...
Click to collapse
Just ran the A501 A.bat and got the following
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x037c620442e124d7
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Still unable to get into recovery.
Sounds like a hardware issue with your internal sd. I think you'll have to send it to Acer for repair. But maybe, one of the many other guys here in the forum may be of help for you.
jazzyjames said:
Just ran the A501 A.bat and got the following
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x037c620442e124d7
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Still unable to get into recovery.
Click to expand...
Click to collapse
Try this one package(h?? p change to httр):
h??p://narod.ru/disk/53919831001.a235ea2225f319015f30c009629d2075/BabSector.rar.htm
Hello,
I have the same problem.
When I run A501A.bat, it creates some partitions and format 4 partitions. The blank screen of the tablet shows acer logo with Acer Apx Mode in white and after that nothing happens!
If I reboot the tablet, I can't go to recovery.
I don't know the tablet's story because I bought it broken. The tablet stucks in Apx mode.
(I am sorry for my bad english)
Sent from my Galaxy Nexus using xda app-developers app
EDIT: post deleted = sorry guys this was sposed to be a pm
Hello,
When I try A501A.bat that's what happens:
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x037c618743e02497
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
Formatting partition 2 BCT please wait.. done!
Formatting partition 3 PT please wait.. done!
Formatting partition 8 APP please wait.. done!
Formatting partition 4 EBT please wait.. done!
failed executing command 14 NvError 0x30012
command failure: create failed (bad data)
Appuyez sur une touche pour continuer...
Can anybody help me please.... :crying:
Thanks.
(I am sorry for my bad english)
Same problem here!!!
Could someone please help?
Thanks a lot!
Code:
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: specified partition is invalid or does not exist (code: 7) me
ssage: nverror:0x42008 (0x6042008) flags: 0
sebone02 said:
Hello,
When I try A501A.bat that's what happens:
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x037c618743e02497
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
Formatting partition 2 BCT please wait.. done!
Formatting partition 3 PT please wait.. done!
Formatting partition 8 APP please wait.. done!
Formatting partition 4 EBT please wait.. done!
failed executing command 14 NvError 0x30012
command failure: create failed (bad data)
Appuyez sur une touche pour continuer...
Can anybody help me please.... :crying:
Thanks.
(I am sorry for my bad english)
Click to expand...
Click to collapse
stragnagn said:
Same problem here!!!
Could someone please help?
Thanks a lot!
Code:
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: specified partition is invalid or does not exist (code: 7) me
ssage: nverror:0x42008 (0x6042008) flags: 0
Click to expand...
Click to collapse
this appears to be the same error code as the OP's...I pm'ed jazzy earlier this
week to ask him if he had fixed his tab...
his reply was No...he had to send it in for repair and get the motherboard replaced....
If timmydeansv4 does not work in this instance then you will need to contact acer!!!
also could u pls post yr error code in this post as well trying to get a thread with all the error codes posted, thanks and good luck
dibb
VelosCohagen said:
Theres something bad with the partitions on your internal sd.
Download Bad Sector from my Dropbox:
In apx mode run a501a.bat. when finished, reboot and go in recovery. Format system partition 3 times. Go back in apx mode. Run a501b.bat. when finished, you are on unlocked ics bootloader v8 and cwm 1.7.3. Boot in recovery and flash the ics rom you like.
Gesendet von meinem Iconia A501 mit Tapatalk 2
Click to expand...
Click to collapse
Files on the link removed. Can someone upload these files?
Iganja said:
Files on the link removed. Can someone upload these files?
Click to expand...
Click to collapse
https://mega.co.nz/#!q5U1nRYZ!IS4FMz0Mb7ewo-Vd-2u5KU_cRE7zreTR4KgU_q8HcC8
Sent from my SM-N910U using Tapatalk
dibb_nz said:
mega.co.nz/#!q5U1nRYZ!IS4FMz0Mb7ewo-Vd-2u5KU_cRE7zreTR4KgU_q8HcC8
Sent from my SM-N910U using Tapatalk
Click to expand...
Click to collapse
Thank U!
It is a pity that it did not help .
Still gives the following error :
Code:
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
bad memory chip, new motherboard is only fix
Sent from my SM-N910U using Tapatalk
Apologies for yet another thread. I've been through every "unbrick" thread and still not able to boot the tab. I'm starting to think it's time to recycle the thing.
So, I picked up my tab one day and it had powered off (bone stock on the latest OTA). Tried to boot up and never got past the Acer splash screen (multiple attempts). Tried to reflash via the sd card, and it failed. Now it only boots to the dead Android. Try to flash another rom (these are stock releases) and it hangs for over a day without completing. Now it won't get past apx mos, black screen with a power light. Tried to flash via nvflash using several automated methods, they all fail complaining of various errors that seem to be related to bad partitions. I run badblocks and get errors. Now, having gone through everything short, I go to euu. That also hangs on copying the image. I'm out of ideas. is there something I haven't tried, or am I likely dealing with s dead tab at this point?
Pretty much the same thing happened to me last night I stayed up all morning trying to fix it but I'm beginning to realize it's probably something in the hardware.. Odd there so many all about the same kind of time.. Mine was rooted and the only thing I can boot to is the first skrillax boot loader screen, or Acer screen..depending on what I did..guess its Tims for a new tab..any suggestions? Lol
Sent from my A100 using Tapatalk
droidxxxxx said:
Pretty much the same thing happened to me last night I stayed up all morning trying to fix it but I'm beginning to realize it's probably something in the hardware.. Odd there so many all about the same kind of time.. Mine was rooted and the only thing I can boot to is the first skrillax boot loader screen, or Acer screen..depending on what I did..guess its Tims for a new tab..any suggestions? Lol
Sent from my A100 using Tapatalk
Click to expand...
Click to collapse
I guess we can take the guts out and make them into picture frames?
I did the fix my Acer thing from the Acer website found out mine is out of warranty for sure but they got back to me with an email and a phone number and I called and talked to a girl who told me it would be 200 and $49 just to get it in the door for a repair. Needless to say I *****ed and moaned told her I was going to throw it in the garbage and she is now sending me a label for FedEx to ship it and they will look at it hopefully they will fix it possibly for free now lol so I'm going to be sending it off when I get the label. I've tried just about everything and it seems mine just isn't recognized very well by the PC. I wonder if I have the correct drivers
Sent from my SCH-I535 using Tapatalk
wsmithjr said:
Apologies for yet another thread. I've been through every "unbrick" thread and still not able to boot the tab. I'm starting to think it's time to recycle the thing.
So, I picked up my tab one day and it had powered off (bone stock on the latest OTA). Tried to boot up and never got past the Acer splash screen (multiple attempts). Tried to reflash via the sd card, and it failed. Now it only boots to the dead Android. Try to flash another rom (these are stock releases) and it hangs for over a day without completing. Now it won't get past apx mos, black screen with a power light. Tried to flash via nvflash using several automated methods, they all fail complaining of various errors that seem to be related to bad partitions. I run badblocks and get errors. Now, having gone through everything short, I go to euu. That also hangs on copying the image. I'm out of ideas. is there something I haven't tried, or am I likely dealing with s dead tab at this point?
Click to expand...
Click to collapse
This is what I'd do, and this goes for anyone stuck on the acer logo or otherwise soft-bricked.
Run babsector.rar file.
This is the ONLY file that will give you an error that can be troubleshooted. NONE of the auto tools or the manual nvflash method will do this.
Once babsector has run, post the output and we can tell if its the dreaded hardware fault or not.
Download and instructions here http://forum.xda-developers.com/showthread.php?t=2049778
A great guide by kaijikun here http://forum.xda-developers.com/showthread.php?t=2450119
If you get stuck with the black screen with the power led light ON.
Hold the power button for 5 secs until it goes off.
Re-enter apx mode manually (i.e. this means using the buttons, don't use the auto tools, it won't work)
It also goes without saying, you need the acer drivers http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=3851 and the drivers from the android sdk, you can download a mini zip here https://www.dropbox.com/s/x98233x397wrzr1/Step_1_Drivers_mini_sdk_adb.zip
If you don't have your CPUID, there's no way of unbricking.
If you don't know what a CPUID is AND can still boot, read this guide here http://forum.xda-developers.com/showthread.php?p=25429111#post25429111.
If you cannot boot and don't have your CPUID you need to recover it using Linux, see srbeens guide here http://forum.xda-developers.com/showthread.php?t=1751978
Just to say, the whole unbricking process takes some time....mostly downloading everything you need. You will also need a fully charged tab, you can sometimes use 40-50% of your battery doing this. To be safe connect your charger and leave it there till you are done.
The other thing is your PC OS...there has been mixed success with win8 and 64bit. FOr best results win7, vista and xp work best. If you are linux savvy, you're in luck, no driver issues at all with this OS!!!
The only way you can not restore your tab to fully working order is if your tab has the faulty memory chip. And the only way to know if this is the case is to run the babsector.rar file.
dibb
wsmithjr said:
Apologies for yet another thread. I've been through every "unbrick" thread and still not able to boot the tab. I'm starting to think it's time to recycle the thing.
So, I picked up my tab one day and it had powered off (bone stock on the latest OTA). Tried to boot up and never got past the Acer splash screen (multiple attempts). Tried to reflash via the sd card, and it failed. Now it only boots to the dead Android. Try to flash another rom (these are stock releases) and it hangs for over a day without completing. Now it won't get past apx mos, black screen with a power light. Tried to flash via nvflash using several automated methods, they all fail complaining of various errors that seem to be related to bad partitions. I run badblocks and get errors. Now, having gone through everything short, I go to euu. That also hangs on copying the image. I'm out of ideas. is there something I haven't tried, or am I likely dealing with s dead tab at this point?
Click to expand...
Click to collapse
Yeah same thing happened to my A500. But downloaded 4 files Because there was 4 to choose from.
I renamed the file, eg filename.zip, to "update" with no extension. Copied to a clean micro SD. Inserted the SD card. Held the volume down and power switch until tablet vibrated and toggled the screen lock switch on then off. Then sat and watched. The whole process can take 30 minutes and for a long time it seemed stuck at about 25%. I decided to wait and see. And it all came good.
My A500 was stock no root. Still is and seems to work better now.
:good:
Here's the output from a501 a.bat, as requested.
Nvflash started
rcm version 0X20001
System Information:
* *chip name: t20
* *chip id: 0x20 major: 1 minor: 3
* *chip sku: 0x8
* *chip uid: 0x037c61c742a14597
* *macrovision: disabled
* *hdcp: enabled
* *sbk burned: true
* *dk burned: true
* *boot device: emmc
* *operating mode: 4
* *device config strap: 0
* *device config fuse: 0
* *sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .
Thanks in advance. ..
dibb_nz said:
This is what I'd do, and this goes for anyone stuck on the acer logo or otherwise soft-bricked.
Run babsector.rar file.
This is the ONLY file that will give you an error that can be troubleshooted. NONE of the auto tools or the manual nvflash method will do this.
Once babsector has run, post the output and we can tell if its the dreaded hardware fault or not.
Download and instructions here http://forum.xda-developers.com/showthread.php?t=2049778
A great guide by kaijikun here http://forum.xda-developers.com/showthread.php?t=2450119
If you get stuck with the black screen with the power led light ON.
Hold the power button for 5 secs until it goes off.
Re-enter apx mode manually (i.e. this means using the buttons, don't use the auto tools, it won't work)
It also goes without saying, you need the acer drivers http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=3851 and the drivers from the android sdk, you can download a mini zip here https://www.dropbox.com/s/x98233x397wrzr1/Step_1_Drivers_mini_sdk_adb.zip
If you don't have your CPUID, there's no way of unbricking.
If you don't know what a CPUID is AND can still boot, read this guide here http://forum.xda-developers.com/showthread.php?p=25429111#post25429111.
If you cannot boot and don't have your CPUID you need to recover it using Linux, see srbeens guide here http://forum.xda-developers.com/showthread.php?t=1751978
Just to say, the whole unbricking process takes some time....mostly downloading everything you need. You will also need a fully charged tab, you can sometimes use 40-50% of your battery doing this. To be safe connect your charger and leave it there till you are done.
The other thing is your PC OS...there has been mixed success with win8 and 64bit. FOr best results win7, vista and xp work best. If you are linux savvy, you're in luck, no driver issues at all with this OS!!!
The only way you can not restore your tab to fully working order is if your tab has the faulty memory chip. And the only way to know if this is the case is to run the babsector.rar file.
dibb
Click to expand...
Click to collapse
wsmithjr said:
Here's the output from a501 a.bat, as requested.
Nvflash started
rcm version 0X20001
System Information:
* *chip name: t20
* *chip id: 0x20 major: 1 minor: 3
* *chip sku: 0x8
* *chip uid: 0x037c61c742a14597
* *macrovision: disabled
* *hdcp: enabled
* *sbk burned: true
* *dk burned: true
* *boot device: emmc
* *operating mode: 4
* *device config strap: 0
* *device config fuse: 0
* *sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .
Thanks in advance. ..
Click to expand...
Click to collapse
Its a hardware fault, bad memory chip
Sent from my GT-I9300 using Tapatalk
Thank you for the confirmation.
dibb_nz said:
Its a hardware fault, bad memory chip
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Same thing happened to mine
Exact same thing happened to mine. No recourse since mine was out of warranty but I complained about it on an Acer Forum and on their facebook page and within a couple of hours I was contacted and instructed to mail it in. I had to pay for the shipping charges there (like 12 bucks) but they shipped it back on their dime and it was fixed. From shipping to them to getting it back was about 2 weeks. I was ready to swear off Acer forever but they manned up and fixed something that was obviously a widely known defect since it's happening to many others.
Dear dibb_nz,
What if A500 A.bat is working flawlessly for me, but A500 B.bat is failing during BCT formatting stage:
Code:
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: partition table is required for this command (code: 0) message: nverror:0x2 (0x2) flags:0
Should you need any additional info, just ask me
Thank you in advance for reply!
Hardware failure?
a501A failed. Here is the script.. Is my a500 suffering from the same bad memory chip problem?
Nvflash started
rcm version 0x20001
System Information:
- chip name: t20
- chip id: 0x20 major: 1 minor: 3
- chip sku: 0x8
- chip uid: 0x037c6185435f2617
- macrovision: disabled
- hdcp: enabled
- sbk burned: true
- dk burned: true
- boot device: emmc
- operating mode: 4
- device config strap: 0
- device config fuse: 0
- sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
: 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x42008 (0x2042008) flags:0
Thanks in Advance.
SyavsoN said:
Dear dibb_nz,
What if A500 A.bat is working flawlessly for me, but A500 B.bat is failing during BCT formatting stage:
Code:
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: partition table is required for this command (code: 0) message: nverror:0x2 (0x2) flags:0
Should you need any additional info, just ask me
Thank you in advance for reply!
Click to expand...
Click to collapse
mhiester said:
a501A failed. Here is the script.. Is my a500 suffering from the same bad memory chip problem?
Nvflash started
rcm version 0x20001
System Information:
- chip name: t20
- chip id: 0x20 major: 1 minor: 3
- chip sku: 0x8
- chip uid: 0x037c6185435f2617
- macrovision: disabled
- hdcp: enabled
- sbk burned: true
- dk burned: true
- boot device: emmc
- operating mode: 4
- device config strap: 0
- device config fuse: 0
- sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
: 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x42008 (0x2042008) flags:0
Thanks in Advance.
Click to expand...
Click to collapse
Sorry u both having probs an I not sure I can help but.....
@SyavsoN so do u get an error with the first bat file? If not,
run the first one again
Enter recovery and do the wipes
Reboot recovery and flash yr rom
What happens???
@mheister and everyone else with bct error.
Apxflash tool is the only tool that can fix these errors.
Normally u can use the default bct when u get to that option. But if u have probs with the default then u must use the bct from yr tab. So choose the dump yr bct option.
Thats about all I can suggest for u guys atm,
If @blackthund3r is still lurking around here he may be able to help out with this!!
dibb
Socrates11 said:
Exact same thing happened to mine. No recourse since mine was out of warranty but I complained about it on an Acer Forum and on their facebook page and within a couple of hours I was contacted and instructed to mail it in. I had to pay for the shipping charges there (like 12 bucks) but they shipped it back on their dime and it was fixed. From shipping to them to getting it back was about 2 weeks. I was ready to swear off Acer forever but they manned up and fixed something that was obviously a widely known defect since it's happening to many others.
Click to expand...
Click to collapse
I just got the same issue. a501 A.bat gives me the same error: "bootloader status: fatal failure to read / write to mass storage (code: 9) message: nverror:0x8 (0x19000008) flags: 0"
Code:
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
I just posted on the Acer Americas Facebook page, let's see what they say...
HyeProfile said:
I just got the same issue. a501 A.bat gives me the same error: "bootloader status: fatal failure to read / write to mass storage (code: 9) message: nverror:0x8 (0x19000008) flags: 0"
Code:
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
I just posted on the Acer Americas Facebook page, let's see what they say...
Click to expand...
Click to collapse
Try Acer dude, 3 users have had there's repaired by acer for free, even if they were no longer under warranty!!! It's worth a shot
Sent from my HTC_PN071 using Tapatalk
Anyone know how to get in contact with Acer. I've looked around in their support website, but I can't chat with a support assistant because my tablet is out of warranty.
Sent from my DROID RAZR using Tapatalk
Check my fix out!
wsmithjr said:
Here's the output from a501 a.bat, as requested.
Nvflash started
rcm version 0X20001
System Information:
* *chip name: t20
* *chip id: 0x20 major: 1 minor: 3
* *chip sku: 0x8
* *chip uid: 0x037c61c742a14597
* *macrovision: disabled
* *hdcp: enabled
* *sbk burned: true
* *dk burned: true
* *boot device: emmc
* *operating mode: 4
* *device config strap: 0
* *device config fuse: 0
* *sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .
Thanks in advance. ..
Click to expand...
Click to collapse
I had the same error check out my tut (http://forum.xda-developers.com/showthread.php?p=49585687)
HI, I have been working on the PB Liberty Tab G100 for over a week.. I just want it back to stock.. no custom boot loaders or roms etc.. just so they can use it..
the story so far... I was asked to repair a PB liberty tab that was supposedly just freezing.. I think it had a custom boot V8..
Recovery was not working just getting the android dube with red triangle.. so installed thor recovery via fastboot..
tried the update method.. did not work.. tried everything.. but was having an issue with the wiping and formating...
I managed to finally get the cpuid by using a 64 bit version of ubuntu and have managed to get the SBK.. tried the recommended flashs A500 apx etc
but now i'm stuck in apx mode.. when i try to use V8-UNL-ICS-HC-bootloader-MULTI-cwm method I get the failed to format..
info found from this thread http://forum.xda-developers.com/showthread.php?t=1751978
**********************************************************
* Press any key when your A500 is in bootloader mode *
**********************************************************
Press any key to continue . . .
Flashing HC-Bootloader...
Nvflash started
[resume mode]
Formatting partition 4 please wait.. Command Execution failed cmd 13, error 0x12
0002
FAILED!
command failure: format partition failed (bad command)
bootloader status: unknown operation (code: 1) message: flags: 0
Nvflash started
[resume mode]
I think I have an internal storage issue, or bad sectors.. or I am just not using the right apx.. and help would be awesome..
i have read so many forum sections and pieced together which has finally got me into the device.. but now I seem to have hit a brick wall..
so help i have tried to track down the bad sectors software to run in apx mode but cant seem to find it al all the link i have found are dead..
quick update
**********************************************************
* Make your choise: *
*(1) ICS bootloader V8 with TWRP-2.1.3-ICS cwm(touch cwm)*
*(2) ICS bootloader V8 with PubRecovery-v0.2 (BareBones) *
*(3) ICS bootloader V8 with Thor-1.7cwm (touch cwm) *
*(4) ICS bootloader V8 with Thor-1.7.3 NEW cwm(touch cwm)*
* with its compatible recoveries. *
**********************************************************
(1 2 3 4):4
Loading bootloader...
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x037c62484260****
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: bct.bct
- 4080/4080 bytes sent
bct.bct sent successfully
odm data: 0x300d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader_apx.bin
| 714981/714981 bytes sent
bootloader_apx.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
failed executing command 25 NvError 0x120002
command failure: sync failed (bad data)
bootloader status: Bct Write Failed (code: 22) message: nverror:0x42008 (0x60420
08) flags: 0
*****************************************************************
* Press any key when your A500/501/G100W is in bootloader mode *
*****************************************************************
Press any key to continue . . .
UPDATE
I have tried running Badsector but all i get it this.. I have checked the correct drivers are installed.. but just seem to be stuck..
I am thinking my internal storage is fried..
****************************************************************
* Before executing, be sure to delete recovery-from-boot.p *
* from /system to ensure recovery will stick *
****************************************************************
****************************************
* Reboot your tablet into APX mode *
****************************************
Generate your SBK with your CPUID from here :
http://vache-android.com/v1/index.php?site=sbk
Enter your SBK:0x****1E00 0x0**51700 0xEB*****2 0x682*****
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x037c624842601397
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .
hello i have an A500 stock rom and recovery,never flash it anything and one day it just died after puting it on stand by, i can put in in apx mode but i never turn the debugg on, so when i try to flash it ..nothing happens, the sd method dont work i hace the cpuid and the sbk witht the linux method, but thats as far as i can get.
im on ics, my bootloader is v0.03.12-ics and when i press vol +, power and rotation lock i got this
Bootloader v0.03.12-ics: starting fastobbot USB download protocol.
its was bricked so i run the a501 A.bat and after it i just came with an APX mode only
This is the result of the a501.bat
Nvflash started
rcm version 0X200001
System Information:
chip name: t20
chio id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x0380624440e10417
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
opertating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
--4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x1080000 entry point: 0x1080000
ending file: bootloader.bin
: 714409/714409 bytes sent
bootloader.bin sent successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
formating partition 2 BCT please wait ... FAILED
command failure: create failed (bad data)
bootloader status: specified partiton is invalid or does not exist (code: 7) message: nverror: 0x42008 (0x6040008) flags: 0
press any key . . .
Any ideas . I think i have lost my partitions, is there a way to create them?
by the way im very noob here so a step by step procedure is what i need....
Thank for the help you can provide me .
My Ideapad K1 is bricked, I assume.
I tried flashing multple ROMS and I keep getting below error..
flash-win
Flashing ICS Stock Rom for Lenovo Ideapad K1
build 120607
Nvflash v1.8.90246 started
Using blob v1.1.57813\AppDap☺│ß½W
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x0428018142a05597
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 1
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0x300c0011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
\ 1393296/1393296 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: MSC
creating partition: USP
creating partition: UDA
creating partition: TMP
creating partition: GPT
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: specified partition is invalid or does not exist (code: 7) me
ssage: nverror:0x42008 (0x6042008) flags: 0
Click to expand...
Click to collapse
Note- My SDCARD slot is corrupted and it does not work.
Is there a way to recover the tab?
Update - I tried flashing 'K1_A301_11_11_111108_US' and it worked like a charm. Any other ROM that I try to flash using nvflash does not work thou'