True Tablet UI for Galaxy Tab 2 7.0 - Galaxy Tab 2 General

Found the way to make true tablet ui without dpi change for JB on Galaxy tab 2(Mine is p3100, but it must work with p3110 and p3113). I used idea from this mod for nexus 7: http://forum.xda-developers.com/showthread.php?t=1780970
To do this mod you must have rooted and deodexed firmware. The easiest way is to use this Vodafone mod by chudy_85 and Punisher: http://forum.xda-developers.com/showthread.php?t=2020223 (If you're going to install it, follow tips in that thread)
When you have deodexed JB 4.1.1 you can install mod files: https://hotfile.com/dl/182669919/42850cc/Tablet_UI.zip.html
I suggest you to use something like root explorer or adb to put them to /system/framework. Don't forget to set permissions 755 for files
After installation I suggest to make all wipes, because I received stuck on bootlogo device, but after wipes through cwm everything became fine.
I tried to create installation file for cwm, but some people said, that it is not installing. Can anyone say what is wrong in script?
Link: https://hotfile.com/dl/182670249/6339e69/TabletUI_cwm.zip.html
Use it at your own risk. I'm not responsible for any damage of your device.
PS: I'm using this mod for a couple of days and everything works fine
Screenshot from mode:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Not used stock ROMs for a while , so how is this different ? Whats the DPI set at in the mod. Can you post more screens and explain how it differs from stock , maybe compare it to AOKP M1 Tablet UI please. Yes 3100 will work on 3110/3113.
Thanks.

Dpi is not changed at all. I baksmali-d original files, found places, similar to ones, given for nexus7, changed them to force tablet ui and smali-d and packed to new files. Take a look at first post of nexus7 mod topic: http://forum.xda-developers.com/showthread.php?t=1780970, it gives enough information about what mod gives.
If you ask for differences - look at stock 4.0.x firmware and at stock 4.1.1. This patch makes 4.1.1 android look like 4.0.x(I mean only one bottom status bar, screenshot button etc.). Look at your
And sorry, I cannot compare it to custom firmwares, because I haven't used any of it(rooted stock is enough for me)

Excellent. Now I am willing to upgrade to jelly bean. Will try over the weekend. Thanks
Sent from my GT-P3113 using xda app-developers app

Cool , well as I said I've not been on stock for a while ( Soon as I got the Tab , I got root access and flashed a custom ROM ) BUT ....hey , will flash stock tomorrow and apply the zips. Hope I didnt come across as rude ? Was not my intention , Just curious , that's all.
Tell you what , soon as I have it flashed this , will post screens and let you know how good it is :highfive:
Thanks again

I deleted all odex files in system/app, system/framework folders with Root explorer, copied both files from zip archive to system/framework folder, set permissions, rebooted but stuck on boot logo.
A more detailed instruction would be very helpful :thumbup:

Deodexation is more than simple removing odex files. To deodex you must unpack odex file and build it to .dex, and then pack to the apk/jar file. If you want to know more - google about it
Now the only way for you is reflashing...

I don't get it... looks just like mine does now, without any patches :S
Is it something that got lost when transitioning to Jellybean?

Thanks :good:

please any one give review about this modification. any bugs or anything?

what is permissions 755 ? i know 644 is rw-r-r

That cwm.zip file can't install it gives status 6 error
Sent from my GT-P3100 using Tapatalk 2

Its an script error I think
Sent from my GT-P3100 using xda premium

Yess it works perfectly on stock deodexed jb rom
But is it possible to make pop-up window in image to some what large.....?
Sent from my GT-P3100 using xda premium

okay I fixed zipa package
in your updater-script you have one mistake
lock where
ui_print("***********************************************");
ui_print(" TrueTabletUI, For Samsung Galaxy Tab 2 7.0;
ui_print(" Made by Jmaster, Idea: barrmulio(from xda)");
ui_print("***********************************************");
and you must do it that
ui_print("********************************************************");
ui_print(" TrueTabletUI, For Samsung Galaxy Tab 2 7.0 ");
ui_print(" Made by Jmaster, Idea: barrmulio(from xda) ");
ui_print("********************************************************");
Here we have improved pack
http://www37.zippyshare.com/v/80338076/file.html
If anybody want i added fot this mode 4 way reboot
write to me and i do it
Cheers
P.s
I find one bug in stock miusic player in portrait mode
We almost disappeared abbreviations for random mode selection of songs and play Looped

Mind if I implement this on Tab2Lite?

Dear chuddy 85
Plz check ur pm
Sent from my GT-P3100 using xda premium

Use this patch everywhere you want
As for permissions I have questions myself: despite the default permissions for files are 644(if I`m not mistaken), every mod I saw used permissions 755( e.g. rw-r--r-- with "executable" mark). I don't think, that it is critical

0jmaster0 thanks for this tablet ui mod. It works perfect on my P3100 using chudy_85 rom.
For installation, i'm using root explorer to copy the two file to /system/framework with first change the original file permission to 755, not need to factory reset just wipe cache partition and dalvik cache.

Doesnt work on my p3100 after flashing my touchwiz has been stopped.

Related

Galaxy S Theme

Disclaimer:
I am not responsible for anything bad happens to your phone after you flash this theme.
Flash this theme at your own risk!!!
Just don't forget to nand backup your phone before flashing this theme.
Yet another theme ported to our phone.
Credits to steve_t, creator of this theme. See his thread here.
I checked this theme on Void#echo, LOL v1.2, and Megatron v.1 ROMs.
EDIT:
It is confirmed that this theme works on Void#echo, Void#delta, Devoid ypsilon, LOL v1.2, and Megatron v.1 ROMs.
It is reported that this theme works on Ubuntdroid 4, Optimus T P509
WARNING:
Partially working on OptimusX (FC on Market); see this post
Not working on Darkmoon v.2 and LOL v.1.4
For other ROMs, give it a try and tell us the result (i.e, working OK or not) so that others using same ROM with you will be assured whether to use this theme or not.
This theme has original/default window animation. See post #2 below to change window animation.
Download link: MediaFire
Instruction:
To apply, copy zip file to sd card and flash it.
Don't forget to nand backup your phone first!
After flashing, first boot may take longer time (3 ~ 10 mins)
Included in zip file:
The theme itself
AndroidParticles1 Blue boot animation. Credits to Dysgenic.
Themed Market v.2.3.2. Credits to 00.ante
Screenies:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changing window animation
In case you want to change window animation, you can do it yourself. Try these steps: (as usual, do nand backup first before flashing)
Get xmlsForWindowAnimations.zip here
Extract it to your PC, there will be 5 new directories extracted.
On your PC, copy GalaxySThemeForO1.zip to a file, say you name it 'temp.zip'
Open temp.zip (just open, not extract). I use 7-zip here.
Navigate to directory 'system\framework', double click framework-res.apk, Continue navigating to directory 'res\anim'
Drag-drop all files in one directory (choose 1 directory among 5 extracted directories you got from xmlsForWindowAnimations.zip) into 'res\anim' directory
Close 7-zip, answer 'Yes' when asked whether to update framework-res.apk
If you know how to sign a zip file, do so, copy signed file to sd card and flash it.
Otherwise, copy temp.zip to sd card, reboot to recovery, choose 'Other' then 'Toggle Signature Verify', go back to main menu and flash 'temp.zip'
Reboot
I can't see the screenshot, is it dead link?
Reuploaded screenshot.
Can you see it now?
no probs with screenshots
works on void delta too.
Thanks for your info.
the icons in notification bar is in white colour like lol rom, not blue
im using void delta.
Those white icons belong to 3rd party apps?
If so, am afraid that we have to modify those 3rd party apps
If you think that is not the case, could you upload a screenshot?
Thanks
here we go,
just one doudt, i delested gingerbread folder from void settings , tht be the problem?
pressing power results in abnormal reboot straight from android logo without lg logo.
had to restore nand and now lots of apps fc :|
update : finally got it working, shudnt hav deleted gingerbread
is there any way to have battery meter in this theme?
After instaling this my market stop work only Fc on optimusXrom
Ater having spent one day using this theme i find it very clean, elegant although it is a little too blue .Stays as my theme of choice.
No fc's related to this theme. I am using devoid ypsilon.
Ignore spelling : English seems Greek to me
aragarm said:
After instaling this my market stop work only Fc on optimusXrom
Click to expand...
Click to collapse
So is it ok if I assume that this theme partially working on OptimusX ROM? i.e., only market has FC?
Thanks
I'll try one more.
good theme
Change battery icons to battery meter
boykioy said:
is there any way to have battery meter in this theme?
Click to expand...
Click to collapse
Yes, there is.
My post here may give you hint.
Good theme
Please make it with circular battery , transparent notification bar and better animation if possible.thanks
Sent from my LG-P500 using XDA App
This theme looks great with 140 dpi !
I like this theme very much. Thank you!
I want to use widgetlocker (installed on my phone) to lock the screen instead the theme default screen locker. Every time after phone reboot i get that default screen locker and i dont know how to disable it. Please help me!
Thank you!
LE: I can't install AndroidParticles2 animation. A tried to use adb comands in cmd. I get: "No such file or directory" error. Same problem with the terminal emulator. The 480x800 AndroidParticles2 is copied on the sdcard.

1.12.605.6 Deodexed

WARNING: THIS WILL WIPE /DATA! All of your data will be erased!
So the first thing I did when I got home from work is root my Thunderbolt and create a backup of a fresh wipe of Thunderbolt stock.
First off:
Android OS: 2.2.1
Device: mecha
ROM Name: 1.12.605.6
Rooted (Unsecured boot.img): Yes
Rooted (Superuser.apk + su): Yes
Busybox Installed: Yes
Nano text editor installed: Yes
/system/framework deodexed: Yes
/system/app deodexed: Yes
ROM will wipe data: Yes
Second:
I have tested it does work in its entirety. I had to remove the lines where it flashed boot.img but that is still in the .zip it just doesn't do anything with it since that code in the script it throws errors but without it flashes fine.
Third:
This is completely stock so it does contain the bloat. You can remove it as you see fit using Root explorer or freeze them with titanium backup.
Link:
Debloat: http://www.megaupload.com/?d=F60KZRU0
Bloated: http://www.megaupload.com/?d=RNUVRAM0
Credits:
dsixda for the kitchen to de odex this sweet device
ROOT TEAM:
"Scotty2, jamezelle, jcase, and all of Team AndIRC
Testers, especially ProTekk and Trident
Thanks to scotty2 for WPThis
Busybox was pulled from a CyanogenMod ROM, source should be available here
psneuter was pulled from somewhere, credit to scotty2, source here
All firmware credit goes to 911sniper
Jaroslav from Android Police for editorial help"
Thank you ALL for making this possible.
How do we install this Rom? I tried with CW recovery and no luck.
Thanks
I can flash it via CWR but it just hangs at the boot screen and won't go any further... I wish this would work, I just want a factory rooted/deodexed rom without anything removed so I can choose what stays and what goes.
JAYNO20 said:
I can flash it via CWR but it just hangs at the boot screen and won't go any further... I wish this would work, I just want a factory rooted/deodexed rom without anything removed so I can choose what stays and what goes.
Click to expand...
Click to collapse
Might wanna try Fastboot for flashing. IE replace the file in the permaroot tutorial with this one. Then skip the root steps as this is already rooted.
Str0ntium said:
Might wanna try Fastboot for flashing. IE replace the file in the permaroot tutorial with this one. Then skip the root steps as this is already rooted.
Click to expand...
Click to collapse
so we need to rename it to PG05IMG.zip?
or is there a better way?
Sorry guys for leaving you all hanging. I do have a newer .zip to flash but it doesn't have any of the bloatware (CityID etc) and has some google apps that are on market (Except for quicksearch because it stops the search button from working) to /data/app.
I will upload that later if you like .
Please do. This file is very much appreciated.
Sent from my Thunderbolt using Tapatalk
I would really like to have the file that is deodexed but still contains everything else... can you reupload that one too?
Both are up now. Enjoy.
gonna try something so nvm
Can someone explain exactly what Deodexed means.
Thanks
Jrocker23 said:
Can someone explain exactly what Deodexed means.
Thanks
Click to expand...
Click to collapse
Deodexed in a sense means you can edit and change the files as you like allowing custom figures,images, and animations in place of the stock. It basically allows for people to completely customize rooms to make the run and look as they like. Odexed is completely opposite and you would know a rom is odex because there are .odex files next of ever .apk in the system/app/ folder. You cannot change anything in a odex rom. The completely stock rom is odexed.
mjhuffer said:
Deodexed in a sense means you can edit and change the files as you like allowing custom figures,images, and animations in place of the stock. It basically allows for people to completely customize rooms to make the run and look as they like. Odexed is completely opposite and you would know a rom is odex because there are .odex files next of ever .apk in the system/app/ folder. You cannot change anything in a odex rom. The completely stock rom is odexed.
Click to expand...
Click to collapse
Understood, thank you vm... appreciate the info..
Thank searched high and low for a rom like this. Very much appreciated.
I installed the debloated version and now I have no 3G or WIFI. I'm stuck in 1X and when I try to enable WIFI I get a message that simply states "Error".
http://gititbit.ch/tHu3 - signed_032111_214510.zip
100mbit mirror of the debloated.
Thank you very much for this!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Axiom119 said:
I installed the debloated version and now I have no 3G or WIFI. I'm stuck in 1X and when I try to enable WIFI I get a message that simply states "Error".
Click to expand...
Click to collapse
Put the back cover on, give it about 10 minutes. The back cover is required for 3G/4G.
foszz said:
Put the back cover on, give it about 10 minutes. The back cover is required for 3G/4G.
Click to expand...
Click to collapse
I think ur 7 months or so late.
Sent from my ADR6400L using XDA App

Ultimate Online Theme Kitchen for Samsung Galaxy S II tutorial

I was using HTC devices for some time and using the ultimate online theme kitchen with it. It seems that this kitchen also works with touchwiz UI roms. Some people in the custom ROMs section sounded surprised so I figure I would post this tutorial
MAKE A BACKUP VIA CWM PRIOR TO FLASHING ANYTHING
Download the ROM you want to MOD and extract all the files somewhere on your computer maybe a new folder or something
Then via your computer goto
http://uot.dakra.lt/
Select File upload and then system files as seen by the screenshot below. You will need to upload the following
framework-res.apk (in the folder with the extracted files from the ROM should be under \system\framework)
SystemUI.apk (in the folder with the extracted files from the ROM should be under \system\app)
twframework-res.apk (in the folder with the extracted files from the ROM should be under \system\framework)
IF USING AN ICS ROM SELECT FLASHABLE ZIP AND CHANGE IT TO EMMC (I have only tested battery mod)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
One the files are finished uploading select from the available MODs (I HAVE ONLY TESTED THE FONT,BATTERY and WINDOW (animations) MODs ON GINGERBREAD NOT THE REST SO TRY AT YOUR OWN RISK)
• Battery
• Icons
• Status bar
• Popup
• Lockscreen
• Window
• Fonts
• Bootanimation
And select use this MOD as seen below.
Select what you want and once done select Summary and make sure all the mods show in green. If not most likely you forgot something. Once done click Submit work to kitchen as per screenshot
Once selected you will be given an Order number like UOT-08-31-21-07-1 or something. Write this down as it can take a while for the file to be made.
Once in a while you can go back to
http://uot.dakra.lt/pickup/
To see if your file is ready. If your browser cached the info it should show your file when ready under
Your recently cooked files
If your browser didn’t cache the info then you can select
Show all pickup files
And simply look for your Order number.
Once your file is ready simply download it (I suggest re-naming it as well to something you may recognize) and put it on the Internal SD of your Samsung.
Boot in recovery and make sure to wipe cache and dalvik-cache prior to flashing it
Hope this helps some people
UOT kitchen is great.
The only thing that wont work on the SGS2 is the lockscreen as we dont have the stock one, I have used almost all the other mods (apart from the screen transitions, and for boot animations I always forgot which location was the correct one)
Nice guide
btw: if you are cooking themes for CM7/T mobile theme engine, make sure to untick generate preview as if you leave it ticked the themes wont work.
Used the kitchen back on my Desire when I had it
Now I use Revolution rom on my SGS2
Is this for all roms? Stock or custom? Odexed or deoxed?
Thanks
/CK
Café King said:
Used the kitchen back on my Desire when I had it
Now I use Revolution rom on my SGS2
Is this for all roms? Stock or custom? Odexed or deoxed?
Thanks
/CK
Click to expand...
Click to collapse
Not too sure if all roms but using it on batista rom with no issues
Best bet is to back up before flashing. Worst case you get stuck in boot loop and have to restore
I've used it successfully for battery icon on Leomar V2.6. I'm not sure but I think the cooked zip file updater script does a cache and Dalvik wipe as part of the install, meaning that doing it beforehand is rather pointless.
As always, nandroid first!
carlos67 said:
I've used it successfully for battery icon on Leomar V2.6. I'm not sure but I think the cooked zip file updater script does a cache and Dalvik wipe as part of the install, meaning that doing it beforehand is rather pointless.
As always, nandroid first!
Click to expand...
Click to collapse
In How-To section of the kitchen it says
9. Wipe cache and dalvik-cache (just in case). Do not wipe data / factory reset.
So I have always done it cant hurt anyways even if done 2 times
Café King said:
Used the kitchen back on my Desire when I had it
Now I use Revolution rom on my SGS2
Is this for all roms? Stock or custom? Odexed or deoxed?
Thanks
/CK
Click to expand...
Click to collapse
It will work on anything, odexed, deodex, stock and CM (via T mobile theme engine)
i take a error on CWM 4.0.0.2.
I´ve made de .zip with the option Edify-scrpiting and MTD (default) and the recovery give me a error on install and says that i need to update de script with Edify.
warriorofice said:
i take a error on CWM 4.0.0.2.
I´ve made de .zip with the option Edify-scrpiting and MTD (default) and the recovery give me a error on install and says that i need to update de script with Edify.
Click to expand...
Click to collapse
Could be a bad download simply or the file didn't get made correctly. I would recommend to re upload the files and reselect your mods and attempt to cook a new zip.
Never had this issue as of yet with this kitchen
BTW recovery 4.0.1.5 is available for use via Rom Manager you may want to update it as well
This is truly awesome. Thanks for sharing.
Yeah I second the above comment. I have never tried anything like this before so I was really surprised how easy it was. Thanks for posting this.
Jigsy75 said:
Yeah I second the above comment. I have never tried anything like this before so I was really surprised how easy it was. Thanks for posting this.
Click to expand...
Click to collapse
Glad I could help fellow users
Also I recommend people create new zip for any new rom even different versions within the same rom.
Upgraded yesterday and tried using the old one I made but got a boot loop so it's safer to make new ones for each rom since frameworks can change

[tweak] PFGPS v2.0 FIX - improve speed and accuracy GPS

Thread again open to request users.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before installation make backup in CWM. Everything what you are doing is at your own risk !
Results for my country - the result will be different for each country.
Without PFGPS - 2400 seconds Fixed - apply xda qfix
PFGPS FIX v2.0 :
- First start - 9 seconds - Fixed
- Second start (reconnection) - 2 seconds - Fixed
- Accuracy 3-7 meters
If you leave your country FIX automatically switches to to another best location .
It is not possible to create TWEAK for the whole world. Users can try and choose which version is best for him.
Version 2.0 has 6 different version (version A, B ,C, D, E, F) Earliest try each version and then select verion which was the best for you.
Download: http://www.multiupload.com/4S38925QR4
Extended support for Hungary & Bosnia and Herzegovina:http://www.multiupload.com/PHH5AZ2YN3
If you chage ROM need flash my FIX again!
How install: Download this pack extract PFGPS to computer find your coutry and copy your Country to SDcard and install via CWM. (Without formating any file only replace gps file)
This FIX is build from my Xperia project data and android-servers souce.
Original Samsung Galaxy ACE GPS backup here: http://www.multiupload.com/C7G7SNNKMZ
#Tweak ported and customized by PFittech
#credits AngelDeaths & anddevs & PFittech​
Thanks
downloading now
gonna try after backing up my current rom
---------- Post added at 04:50 AM ---------- Previous post was at 03:55 AM ----------
May be you done mistske in making update zip cause in cwm installetion aborted for india.zip
any way i replaced file manually by root explorer and then after reboot i check maps and now it show location more speedyly than before so thanks
Hey PFittech,
i can confirm its working for the Netherlands. Every time i use nav program gps locks within 60sec, even after phone reboot. THNX!!, again another annoying thing got rid off.
I also got an error on installing from sdcard, so had to put the files manually at the right place. After this i had to reboot 2 times for changes to take effect.
Cheers and again THNX.
Does this work on CyanogenMod 7 ?
Poland.zip installetion aborted too
Ireland aborted.
Sent from my GT-S5830 using xda premium
I think it's something wrong with updater-script
Forever living in my Galaxy Ace using XDA App
ChaosChris said:
Does this work on CyanogenMod 7 ?
Click to expand...
Click to collapse
Yes working with cm7 i tested
helo czech abort instal cwm
pls
write full path for copy manual ? thx
nims11 said:
Thanks
downloading now
gonna try after backing up my current rom
---------- Post added at 04:50 AM ---------- Previous post was at 03:55 AM ----------
May be you done mistske in making update zip cause in cwm installetion aborted for india.zip
any way i replaced file manually by root explorer and then after reboot i check maps and now it show location more speedyly than before so thanks
Click to expand...
Click to collapse
can u please tell which files to be replaced and where exactly to be replaced using root explorer m too from india. plz help
dm08b002 said:
can u please tell which files to be replaced and where exactly to be replaced using root explorer m too from india. plz help
Click to expand...
Click to collapse
Extract your zip file then there is two folder
go in system folder there is anothrr two folder one bin and second etc
so copy file inside bin folder to your phones system/bin/ and change permission to rwxr-xr-x
and file inside etc folder copy to your phones system/etc/ and change permission to rw-r-r
then reboot
can someone confirm if this works for Galaxy ACE?. If not working I delete my post I need feedback.
For those who had problems of instalaton I verify script.
I confermed already though i conferm you again its working properly with ace
prob was in update script
so i put all files manually and working awesomely so thanks again
OK, but it is very bad when it is not installed via a script.I dont have ACE I can not verify this. Could you tell me there is someone put a link to your ROM, i need to know the location of some files for editing. THX
PFittech said:
OK, but it is very bad when it is not installed via a script.I dont have ACE I can not verify this. Could you tell me there is someone put a link to your ROM, i need to know the location of some files for editing. THX
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17576100&postcount=3
it is kernel of rom may it help to use its update script to you
and link of rom you asked
http://forum.xda-developers.com/showthread.php?t=1263292
PFittech said:
OK, but it is very bad when it is not installed via a script.I dont have ACE I can not verify this. Could you tell me there is someone put a link to your ROM, i need to know the location of some files for editing. THX
Click to expand...
Click to collapse
We usually use:
Code:
run_program("system/xbin/busybox" "mount" "/system")
for mounting /system .
And:
Code:
run_program("system/xbin/busybox" "unmount" "/system")
for unmounting /system .
This is also applied to /cache , /data , /sdcard and /sd-ext too !
work fast... thanks =)
For Brazil, it says Installation Aborted, but even replacing using the root explorer and setting up the permissions, my GPS still not locking up. It was working fine with the stock rom.
His update-binary must be problematic .
All files abort with status 0 .
Forever living in my Galaxy Ace using XDA App
for those who get this - Installation aborted. Your kernel does not support my script - amateur said. I'm sorry but I will not fix every file again. The second option is to Install here: @ nims11
Extract your zip file then there is two folder
go in system folder there is one folder anothrr two second bin and etc
Copy the file inside bin folder to your phone system / bin / and change permission to rwxr-xr-x
file and folder inside etc copy to your phone system / etc / and change permission to rw-rr
then reboot
my script works on Galaxy s1,s2 without problem . For Ace use instalatlion via root explorer. I wanted deleted this thread for ACE but someone wrote that it works via ROOT EXPLOLER.

[BOOTANIMATION]JellyBean boot animations ported from [Galaxy Nexus 4.1] and [Nexus 7]

PREVIEWS:» Galaxy Nexus 4.1 OTA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
» Nexus 7
DOWNLOAD:» Galaxy Nexus 4.1 OTAGNexus_JellyBean_boot_animation_for_u8800_v2-signed.zip (/data/local/)
JellyBean_boot_animation_for_u8800_v1-signed.zip (/system/media/)​
» Nexus 7Nexus7_JellyBean_boot_animation_for_u8800_v2-signed.zip (/data/local/)​
THANKS TO:...Awesome... for the stock GNexus 4.1 OTA boot animation
AniBoot for the Nexus 7 boot animation
Google
Photoshop
Notepad++​
RELEASE NOTES:Works in Aurora ICS (u8800 / u8800 pro)
Should work in every rom that have the boot animation in /data/local/​
HOW TO INSTALL:» With CWMReboot your phone into CWM
Install zip from sd card
reboot​ » Manual installation- Extract the zip
- Copy the file /data/local/bootanimatiom.zip from the zip to your phone and past it in the folder /data/local/
(if your rom uses another directory paste it in the correct one)
- Reboot​
INFO:I found out that bootanimation can be stored in /data/local/ or in /system/media/.
The first version of GNexus 4.1 boot animation copy the bootanimatio.zip to the system folder, but we don't have a lot of free space there! So I provided a second version that store the file in the data partition.
Please remove the bootanimation.zip in the system folder if you want to store it in /data. (You can use this cwm zip to do that - remove_bootanimation_from_system-signed.zip)
The boot animation stored in /data/local will the one displayed if you also have a bootanimation.zip file in /system/media/!​
working it only ics? or .35 kernel?
i using ezet's cm7 (.32) can i flash your file?
Also interested about flashing on ICS ?
This should work on all roms and kernels.
Sent from my GT-P1000 using Tapatalk 2
The CWM zip will work in Aurora without problems.
In other roms you need to see the directory of the bootanimation.
In aurora is /system/media/
Sent from my U8800 using xda app-developers app
Thanks, I was searching for that bootanimation in 480x800 and here I found your thread in most recent.
Sent from my LG-P970 using xda premium
thanks I got it working on mine fine :good:
Simple and clean. Like it.
Btw, anyone has the Nexus7's? http://www.androidpolice.com/2012/0...lly-bean-boot-animation-as-seen-on-a-nexus-7/
VuDuCuRSe said:
Simple and clean. Like it.
Btw, anyone has the Nexus7's? http://www.androidpolice.com/2012/0...lly-bean-boot-animation-as-seen-on-a-nexus-7/
Click to expand...
Click to collapse
I'll try to do it on the launch
1st post updated.
Added Nexus 7 boot animation.
Changed the folder of bootanimation.zip from /system/media/ to /data/local/
thanks works perfectly on cm7 ezet
Idk if im searching in the wrong place but i got a Huawei ideos x5 Aurora ics 4.1 update 1a and in System/media i cant find boot animation just some video and audio folders and in Data/local just is a folder called tmp that is empty :S
Works in Aurora 5. Have used nexus 4.1 ota boot animation 3 months and love it so simple ....
very good. ty!
oskar1578 said:
Idk if im searching in the wrong place but i got a Huawei ideos x5 Aurora ics 4.1 update 1a and in System/media i cant find boot animation just some video and audio folders and in Data/local just is a folder called tmp that is empty :S
Click to expand...
Click to collapse
sr21 said:
1st post updated.
Added Nexus 7 boot animation.
Changed the folder of bootanimation.zip from /system/media/ to /data/local/
Click to expand...
Click to collapse
As I wrote before, you can store the bootanimations in two places /system/media/ or /data/local/. The latest version have the bootanimations in /data/local/ to save space in /system.
Note, the phone only uses the /system/media bootanimation if there isn't one in /data/local/

Categories

Resources