I have installed Jelly blast V3 on galaxy y. It has kurotsugi kernel but does not have much governors can anybody teel me how to addd more governors to it.
Install a new kernal.
Sent from my GT-I9100 using Tapatalk
Actually, you dont need to use any more governers, the governers given in kuros kernel are enough.
You need to modify the kernel in order to add more governers which is complicated, you can use Savies Kernel Rev 73 instead which has about 20 governers
Hey....guys i installed repencis rom 3.5 for galaxy y......it's kinda great.....but one problem....i dunno how to overclock my phone on this new custom rom.....i tried the same overclock procedure that i tried wen i had my stock rom but the phone did not start up on this new rom during boot process...please help urgent??????
Sharran said:
Hey....guys i installed repencis rom 3.5 for galaxy y......it's kinda great.....but one problem....i dunno how to overclock my phone on this new custom rom.....i tried the same overclock procedure that i tried wen i had my stock rom but the phone did not start up on this new rom during boot process...please help urgent??????
Click to expand...
Click to collapse
I am very sorry to inform you that Repensis Kernel doesn't support overclocking. If you want an overclock kernel, try Merruk Technology Kernel V2.5. Else, flash Savie's Kernel and overclock it the way you did so. Merruk kernel v2.5 is already overclock to 1.2 GHz. You don't need to flash overclock zip again. But Savie kernel is not yet overclock. You need to flash the overclock zip file to overclock it to 900MHz. Only Stock kernel, merruk kernel and savie kernel supports overclocking till date of all the available kernels for Galaxy Y. Always keep in mind that overclocking drains the battery and heats up the phone which can cause damage to your handset. Just reflash Repensis Rom v3.5 via Clockwork Mode Recovery or via Stock Recovery.
Hit thanks if I helped you.
Sent from my GT-S5360 using xda premium
thadoukuki said:
I am very sorry to inform you that Repensis Kernel doesn't support overclocking. If you want an overclock kernel, try Merruk Technology Kernel V2.5. Else, flash Savie's Kernel and overclock it the way you did so. Merruk kernel v2.5 is already overclock to 1.2 GHz. You don't need to flash overclock zip again. But Savie kernel is not yet overclock. You need to flash the overclock zip file to overclock it to 900MHz. Only Stock kernel, merruk kernel and savie kernel supports overclocking till date of all the available kernels for Galaxy Y. Always keep in mind that overclocking drains the battery and heats up the phone which can cause damage to your handset. Just reflash Repensis Rom v3.5 via Clockwork Mode Recovery or via Stock Recovery.
Hit thanks if I helped you.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
thanks a lot for the help....
thadoukuki said:
I am very sorry to inform you that Repensis Kernel doesn't support overclocking. If you want an overclock kernel, try Merruk Technology Kernel V2.5. Else, flash Savie's Kernel and overclock it the way you did so. Merruk kernel v2.5 is already overclock to 1.2 GHz. You don't need to flash overclock zip again. But Savie kernel is not yet overclock. You need to flash the overclock zip file to overclock it to 900MHz. Only Stock kernel, merruk kernel and savie kernel supports overclocking till date of all the available kernels for Galaxy Y. Always keep in mind that overclocking drains the battery and heats up the phone which can cause damage to your handset. Just reflash Repensis Rom v3.5 via Clockwork Mode Recovery or via Stock Recovery.
Hit thanks if I helped you.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
You are WRONG.Repencis kernel CAN OVERCLOCK to 312,624,832,also have governors and io scheduler and i use it daily Trust me @Shaaron,repencis kernel can overclock.
funny95 said:
You are WRONG.Repencis kernel CAN OVERCLOCK to 312,624,832,also have governors and io scheduler and i use it daily Trust me @Shaaron,repencis kernel can overclock.
Click to expand...
Click to collapse
Man,where is the overclock frequency???
hmahadi98 said:
Man,where is the overclock frequency???
Click to expand...
Click to collapse
Flash repencis kernel(i use old,from repencis v3.5 rom not new) and install no frills cpu control from google play and you see frequency(312,624,832) also governors and io scheduler and set what frequency you want.I use min 312 and max 624 governor ondemand,io scheduler sio.After my opinion these settings are good because battery not drain fast and performance are good.But if i play gsmes like angry birds i set to min 832 max 832 governor performance and io scheduler vr.
funny95 said:
You are WRONG.Repencis kernel CAN OVERCLOCK to 312,624,832,also have governors and io scheduler and i use it daily Trust me @Shaaron,repencis kernel can overclock.
Click to expand...
Click to collapse
My dear, do you really know what overclocking means? Our CPU is meant to run at the max frequency of 832 MHz and min frequency of 312Mhz. If you want it to run at frequencies higher than 832MHz, you have to overclock the cpu. If you can make your cpu run at frequencies higher than 832 Mhz then it means you have overclocked your cpu and your kernel supports overclocking.I have tried to overclock repensis v3.5 kernel before, and I was stuck at Samsung Galaxy Y screen and the phone didn't boot up thereby indicating that the kernel doesn't support overclocking and hence the cpu cannot be overclock. In short, overclocking a cpu means to make the cpu run at frequencies higher than its permissible max frequency as set my the manufacturer. Better do a little research before posting.
Sent from my GT-S5360 using xda premium
HELP ..
Help PLEASE ... I installed CREED'S ROM 3.5... and I want to overclock it to 1.2 gHz... Please help me step by step procedure!!!! Godbless You
HOw can i undervolt kuro kernel permanently?
Hai I am a junior member of xda i need a bit help in merruk kernel
my device details
Samsung Galaxy Y GT-S5360
ROM-Jelly Blast V3
Kernel Merruk Kernel 2.6.35.14
Got upto 1.2GHz in the frequency list in NO Frills Cpu Control
but i need some help in setting Governors and IO Schedulers for getting balanced perfromance as well as battery efficiency upto maximum level adoptable
help me guys
mathan52 said:
Hai I am a junior member of xda i need a bit help in merruk kernel
my device details
Samsung Galaxy Y GT-S5360
ROM-Jelly Blast V3
Kernel Merruk Kernel 2.6.35.14
Got upto 1.2GHz in the frequency list in NO Frills Cpu Control
but i need some help in setting Governors and IO Schedulers for getting balanced perfromance as well as battery efficiency upto maximum level adoptable
help me guys
Click to expand...
Click to collapse
first of all plz search before posting.there are many threads where u could get ur answer or ask in "any questions" thread opened by sir deadly.
For ur answer use
conservative + sio for power saving
bcm21553+ cfq for power boost
or smartassv2+sio and lionheart+sio for balanced purpose.
mathan52 said:
Hai I am a junior member of xda i need a bit help in merruk kernel
my device details
Samsung Galaxy Y GT-S5360
ROM-Jelly Blast V3
Kernel Merruk Kernel 2.6.35.14
Got upto 1.2GHz in the frequency list in NO Frills Cpu Control
but i need some help in setting Governors and IO Schedulers for getting balanced perfromance as well as battery efficiency upto maximum level adoptable
help me guys
Click to expand...
Click to collapse
plz dont create this type of threads from now on......
people already hv asked such questions....so plz search before posting....
i know u r a junior member here..
for battery saving try
max-624 or 468
min-312
gov-conservative
i/o-noop
for performance
max-1248
min-312
gov-lionheart
i/o-sio or cfq
Sent from my GT-S5360 using xda app-developers app
I'm running Evo-x ROM with Merruk's Kernel. I have No frills CPU installed. However, there are only two frequencies from which I can choose, 832 MHZ annd 312 MHZ, I heard this kernel can overlock. It came with lots of governors but I still can't the option to adjust frequecies other than 832 and 312 and nor can I find where to overclock the phone's processor from.
M4Ahmed97 said:
I'm running Evo-x ROM with Merruk's Kernel. I have No frills CPU installed. However, there are only two frequencies from which I can choose, 832 MHZ annd 312 MHZ, I heard this kernel can overlock. It came with lots of governors but I still can't the option to adjust frequecies other than 832 and 312 and nor can I find where to overclock the phone's processor from.
Click to expand...
Click to collapse
which version of merruk kernel? have u install ext4 converter and elite modules?
Asmy Yuh said:
which version of merruk kernel? have u install ext4 converter and elite modules?
Click to expand...
Click to collapse
Merruk Kernel Version 2.0
Yes I installed Ext 4 and Elite modules.
M4Ahmed97 said:
Merruk Kernel Version 2.0
Yes I installed Ext 4 and Elite modules.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=23690148&postcount=3
I used mai77's method to flash the kernel
use this method
by biswajit
http://forum.xda-developers.com/showthread.php?t=1981672
Reynaldi said:
use this method
by biswajit
http://forum.xda-developers.com/showthread.php?t=1981672
Click to expand...
Click to collapse
Do I have to flash stock kernel first or can I flash this kernel using this method with Merruk Kernel already installed?