sorry about the dumb question but why would one unlock CID?
Besides, the fact that I dont know what CID really is, I am not able to find the answer to the need/advantage of an unlocked CID.
If I purchase a SIM unlocked phone from any third party vendor (not form a Phone provide under a year's contract) I am able to flush the ROM (such as the GPS enable HTC ROM) as I like, correct?
So, why the need to unlock this CID? Is this procedure only necessary for phones sold through a provider or in order to flash with ROM releases from Dopod, O2 or any other then HTC directly?
Thanks for any explanation!
SIM unlocking is different from CID unlocking.
SIM unlocking lets you put a sim card from any phone company in.
CID unlocking lets you put any ROM on that you want because your phone is not looking for specific security codes to authenticate the ROM as official or genuine.
Just because the phone is SIM free, doesnt mean it's CID unlocked.
Actually CID unlocking only lets you install signed ROMs from other vendors than the one you originally bought your device from.
Des developed SSPL which allows you to do the same, and even flash unsigned (cooked) roms, you can also use CustomRUU which automatically pushes Des SSPL on your phone for you before flashing the ROM or use HardSPL (which is SSPL but flashed into the phone).
This means nowadays you can flash any ROM without the need to CID unlock your device, and retaining your original CID keeps the warranty, so there's no real need to CID unlock your Trinity anymore.
pof said:
Actually CID unlocking only lets you install signed ROMs from other vendors than the one you originally bought your device from.
Des developed SSPL which allows you to do the same, and even flash unsigned (cooked) roms, you can also use CustomRUU which automatically pushes Des SSPL on your phone for you before flashing the ROM or use HardSPL (which is SSPL but flashed into the phone).
This means nowadays you can flash any ROM without the need to CID unlock your device, and retaining your original CID keeps the warranty, so there's no real need to CID unlock your Trinity anymore.
Click to expand...
Click to collapse
thank you very much for the explanation!
I am still not understanding everything (Des SSPL, HardSPL, etc) but apparently I am not really required to unlock CID, since I am planing on keeping the warranty alive and only use official HTC ROM's.
Thank you!
Hi All,
I am new to windows Mob interface and read several threads on how to install cooked roms.
I have 1.48 ROM on my HTC HD2 Leo and need to upgrade it to 1.66.
Can someone please guide me through in how to go about it or post the link (if i have missed any) of any thread that has the tutorial?
Most of the threads talk about flashing a cooked rom but i simply want 1.48 migrated to 1.66?
Any pointers be appreciated.
the process is the same for cooked or official.
is there an upgrade for your phone? you failed to mention is it provider locked?
1 - instal hspl2
2 - run the 1.66 .exe
3 - done.
if you have a provider locked phone, and have the correct update, you can skip step 1, if you have a rom unlocked phone (not network unlocked) then get the htc wwe 1.66 .exe and also skip step 1.
read the stikies for how to do it,. but really all you do is run the progs, press ok when it says.
Hey thanks Sam.
My phone is not SIM LOCKED, tht implies i need not install any HSPL/HSPL2.
All I need to do is ,
1. Download the 1.66 ROM
2. Active Sync my phone
3. Run the exe downloaded.
4. Hard Reset my phone.
Please correct me if i am wrong anywhere!
oops675 said:
Hey thanks Sam.
My phone is not SIM LOCKED, tht implies i need not install any HSPL/HSPL2.
Click to expand...
Click to collapse
It ony implies it, it doesn't confirm it.
sim lock and rom lock are unconnected.
If you sim unlocked it yourself, by buying/getting a code, then the rom is still provider locked.
If the phone came sim unlocked, then it is a good bet it is rom unlocked too.
All I need to do is ,
1. Download the 1.66 ROM
2. Active Sync my phone
3. Run the exe downloaded.
4. Hard Reset my phone.
Please correct me if i am wrong anywhere!
Click to expand...
Click to collapse
yep, thats right. Because you are flashing over usb, it wont affect the SPL, but it will change the radio, so if you want a different radio, you will need to do that afterwards.
Thanks for the info.
My phone was unlocked when it came and was not any provider locked.
All i am looking for is a higher ROM version. Wann try HTC Leo with 1.66 ROM.
Bingo.....
I have upgraded it to 1.66. Thanks for your help
Mods can close this thread if required
Hello,
If I'll NAND my locked HD2 TMOUS for android, will it be unlock automatically ?
no, it wont. and to save you asking in some weeks/months, no, flashing wont relock it once its unlocked either.
Master C said:
Hello,
If I'll NAND my locked HD2 TMOUS for android, will it be unlock automatically ?
Click to expand...
Click to collapse
Are you talking about SIM unlock, or CID (ROM) unlock? You have to flash HSPL to be able to flash Android to the NAND. Either way, this process will CID unlock your device, but not SIM unlock it.
Hi how do i go about flashing my HD2 back to stock English: 3.14.405.2 ROM ?! as i'd like to sell it now. i have an artemis rom, cotulla HSPL 2.08 and a splash screen from an old chucky ROm i'd like to get rid of !!
so how do i do this safely ?cheers dom
p.s will i still be able to boot into an sd build of android from a stock rom ??
into bootloader, 'serial' --> 'USB'
run hspl4 choose 2.08.0000 (or 3.03.0000, or in fact any that end .0000, teh next step will upgrade it anyway, so long as it ends .0000)
into bootloader, 'serial' --> 'USB'
run 3.14 rom .exe
done.
(this assumes you have the correct 3.14 rom, not just the default stock rom. i.e if your phone is from o2 you need the o2 3.14 rom)
PS yes
Oh right thank you for your quick reply! I think I'll just flash a stock rom so I can sell the phone as unlocked! Thanks again for your help! !!
Sent from my HTC Desire using XDA App
onisuk said:
so I can sell the phone as unlocked!
Click to expand...
Click to collapse
you cant relock an unlocked phone anyway, no matter what you flash.
Dont confuse sim lock and rom lock, Totally unconnected.
a sim unlocked phone will still need hspl to flash, and a flashed phone isn't sim unlocked.
samsamuel said:
into bootloader, 'serial' --> 'USB'
run hspl4 choose 2.08.0000 (or 3.03.0000, or in fact any that end .0000, teh next step will upgrade it anyway, so long as it ends .0000)
into bootloader, 'serial' --> 'USB'
run 3.14 rom .exe
done.
(this assumes you have the correct 3.14 rom, not just the default stock rom. i.e if your phone is from o2 you need the o2 3.14 rom)
PS yes
Click to expand...
Click to collapse
oh crap.
i just flashed straight back to stock without doing any of this... have i screwed up?
Also i did it because it keeps crashing and overheating so i was going to try it on stock and if it kept doing it i was going to send it back to htc - will they be able to tell i tried a custom rom?
(seems to be working fine though)
EDIT:
another question - will this have changed my radio back to stock too - or do I have to do this manually?
where can i download the new stock rom as the HTC site says its now for my phone....(probably because it was an O2 branded rom before)
theres an O2 update as well on the HTC website?
Otherwise the latest ones are on here:
http://forum.xda-developers.com/showthread.php?t=623283
I managed to sort mine - turns out you have to do it via SD and it does everything bootloader, ROM and radio. (although it failed the first time and i almost made a mess in my trousers)
If anyones interested the instructions are (taken from HSPL4 app):
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
I also formatted the SD before copying it over.
No there was only one for t mobile !
cheers for the link matey
yea its odd that, the o2 3.14 rom is there via direct link, has been since saturday, but still doesn't show if you navigate to the rom updates page on htc.uk
ok updated the hspl fine...but when i try to flash the new WWE rom i get an "invalid vendor id" at 1% and the flash fails
righty all sorted ! the O2 rom was on the UK site i was being dumb and look on htc Europe site !
all flashed and working fine now
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
CrazyTegger said:
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
Click to expand...
Click to collapse
http://dl.vmall.com/c0m2gktk1f
mcsc said:
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
Click to expand...
Click to collapse
I tried that one but it said invalid vendor id. I assumed that was because I had a Telus phone and not a Cingular one.
I should mention that I'm running 7.8 with bootloader 4.22.2250.0(129185) and firmware 2250.21.40200.661
ofIIns and
jimmy110 said:
link
Click to expand...
Click to collapse
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
yup I have it
CrazyTegger said:
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
Click to expand...
Click to collapse
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
rob243 said:
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
Click to expand...
Click to collapse
PM Sent.
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
jimmy110 said:
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
Click to expand...
Click to collapse
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
CrazyTegger said:
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
Click to expand...
Click to collapse
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
jimmy110 said:
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
Click to expand...
Click to collapse
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
CrazyTegger said:
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
Click to expand...
Click to collapse
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
jimmy110 said:
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
Click to expand...
Click to collapse
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
CrazyTegger said:
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
Click to expand...
Click to collapse
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
jimmy110 said:
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
Click to expand...
Click to collapse
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
CrazyTegger said:
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
Click to expand...
Click to collapse
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
jimmy110 said:
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
Click to expand...
Click to collapse
I'm really not finding anything useful here... I see a lot for Android, but nothing for an HTC Windows Phone. Are you referring to an IMEI unlock? ChevronWP7? Unbranding? Interop Unlock? WP7 Root Tools?
Thanks
I've now managed to developer unlock my Surround. What's the next step from here?