[Q] no bootloader - Acer Iconia A500

I recently rooted my device and I haven't done anything major but somehow I can't access my bl. I tried AR and reinstalled the stock recovery or the CWM but it would just say failed to load or something. It's strange. Any suggestion would be much appreciated..

Not sure if this will help, but
Important to Have your CPUID #...
If you have your CPUID or SBK #, you can use "Tool - AcerA500 APX Flash Tool v0.4 (by blackthund3r)"
A SBK Generator, uses CPUID Info to give you your SBK #
and you could flash any xxxxx.a500apx

Related

(SOLVED) need help unbricking A500 with nvFlash

so I traded an older compaq laptop for this bricked Iconia A500 and they must have really borked it up because all the "normal" unbricking methods will not work, it will not pull the update.zip from the SD card about 10 -15 minutes in I get the LNX checksum error, same thing if I try to factory reset it hangs on Erasing cache... then back to the LNX checksum error. I have tried reflashing a stock EUU ROM in APX mode but it just hangs and wont update. I was able to get the UID by using the usb traffic sniffer and I created the SKB from the website. so now I can get it in APX mode but I am new to the Tegra tablets so I have no idea what I should see or do with the nvFlash, I am a pretty techincal guy and can usually figure stuff out by using common sense but I am sure I am missing something with this nvFlash program. I notice if I send the tablet a command with nvflash (like --sync) it will come back with the normal error but it will also cut off the usb connection and to send any more commands I have to restart APX mode (while in windows, I havent noticed it do that in ubuntu) if anyone has any experience in this and knows the steps to get it back from the abyss I would really appreciate it. I have tried following sc2k's thread on the checksum errors but it won't work because I fall under the "any other recovery" and he said to contact him or post for help, I contacted him 2 days ago and haven't got an answer yet, (I am sure he is busy) so I am going to ask for help here in the meantime.
I think you can try this way:
[downloading necessary files]:
1. pls refer to How to root stock 3.2 and download root-3.2.1-V4.7z
[actions:]
1. extract files from root-3.2.1-V4.7z to c:\a500unbrick
2. go to folder c:\a500unbrick and fined .pdf file with instractions. Read it carefully and follow it.
at the end of this process you will have os 3.2.1 with custom recovery.
a.chursin said:
I think you can try this way:
[downloading necessary files]:
1. pls refer to How to root stock 3.2 and download root-3.2.1-V4.7z
[actions:]
1. extract files from root-3.2.1-V4.7z to c:\a500unbrick
2. go to folder c:\a500unbrick and fined .pdf file with instractions. Read it carefully and follow it.
at the end of this process you will have os 3.2.1 with custom recovery.
Click to expand...
Click to collapse
Thanks I will look into it, but if it needs adb or booting from sd card its a no go because it won't read update.zip (lack of proper recovery image?) Nor can I use adb, the only way I can send commands is through APX mode.
Sent from my Galaxy Nexus using XDA
it doesn't need adb or sdcard update.zip - it's "apx moode" way of flashing
a.chursin said:
it doesn't need adb or sdcard update.zip - it's "apx moode" way of flashing
Click to expand...
Click to collapse
thanks will try this when I get home from work, I found everything under the sun to unbrick except this way. so I am hoping this will work.
still will not work
I have tried the PBJ20upgrade.exe and I know it says to use APX mode in there but it doesn't work as stated in the OP and that is why I said it needs to be with nvFlash, nothing else is working at all. it will just hang at 1/8th done for well over 20 minutes.
thanks for replying though and trying to help.
anyone have experience with nvFlash that can help?
this is how far it gets when I try using nvflash in the command line:
nvflash --bct flash.bct --setbct --configfile flash.cfg --create --odmdata 0xb00d8011 --bl bootloader.bin --sbk 0x45DC1E00 0x48A7F501 0xA7EE1103 0xB0512103 --go
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x037c61c9434032d7
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
data send failed NvError 0x120000
setbct failed NvError 0x0
command failure: bootloader download failed
C:\Users\Jon\Desktop\Acer Tab A500\root-3.2.1\Image>
GOT IT!!!
I got it!! I had to boot into Ubuntu and run the same nvflash command and it worked like a charm, I am currently sporting 3.2.1. now to get some ICS on this thing
thanks for your help a.chursin.
Your welcom
help!
Could someone please help me with this?? Im stuck with the green Acer screen. Bootloader is hosed, I can get it to APX mode, no adb, no recovery, no fastboot.....I think I can use NVflash to flash a recovery and then flash an update.exe, I just dont know the commands. When I try nvflash --sync, the nvidia APX driver in device manager just dissapears and I have to put the tablet back in APX mode.
cooki3monst3r77 said:
Could someone please help me with this?? Im stuck with the green Acer screen. Bootloader is hosed, I can get it to APX mode, no adb, no recovery, no fastboot.....I think I can use NVflash to flash a recovery and then flash an update.exe, I just dont know the commands. When I try nvflash --sync, the nvidia APX driver in device manager just dissapears and I have to put the tablet back in APX mode.
Click to expand...
Click to collapse
How did u get yrself into this will need more info to help BUT
the green recovery screen suggests its the HC recovery image
If u r on HC then I have a feeling nv/fast boot only works on an unlocked b/l which 3.2 is not, but I'm not 100% on that
U can try an EUU based flash as u say apx mode is still available to u
Timmydeanv4 for gen2 stock, else EUU from vaches thread
Ncvflash commands
windows. nvflash --help
Linux. ./nvflash --help
a.chursin said:
I think you can try this way:
[downloading necessary files]:
1. pls refer to How to root stock 3.2 and download root-3.2.1-V4.7z
[actions:]
1. extract files from root-3.2.1-V4.7z to c:\a500unbrick
2. go to folder c:\a500unbrick and fined .pdf file with instractions. Read it carefully and follow it.
at the end of this process you will have os 3.2.1 with custom recovery.
Click to expand...
Click to collapse
This solved my issue, thanks.
I was triyng to update BL to ICS.BL and it actually updates to the BL nicely, but whathever i have tried could no pass the boot, always getting bootloop. So i downgraded it and its working like a charm.
Thanks again.
Would someone help me? I just installed CM10 Jelly bean for Iconia A500 and flashed the corresponding GApss right after. Now I'm stuck on Acer logo and can't go to recovery. Help.
xmond said:
Would someone help me? I just installed CM10 Jelly bean for Iconia A500 and flashed the corresponding GApss right after. Now I'm stuck on Acer logo and can't go to recovery. Help.
Click to expand...
Click to collapse
Can you boot in download mode to clean cache? (Power + Vol+)
Or, can you boot in recovery after shut down device?
If not try it and then tell us.
GueDS said:
Can you boot in download mode to clean cache? (Power + Vol+)
Or, can you boot in recovery after shut down device?
If not try it and then tell us.
Click to expand...
Click to collapse
No, I can't go into recovery even after shutting down the device. It's stuck on Acer logo. Help me please.
*Edit:* Booted in download mode and did a cache wipe. That did the trick! My device is now booting! THANKS A LOT!
xmond said:
No, I can't go into recovery even after shutting down the device. It's stuck on Acer logo. Help me please.
*Edit:* Booted in download mode and did a cache wipe. That did the trick! My device is now booting! THANKS A LOT!
Click to expand...
Click to collapse
I´m glad to help :good:
GueDS said:
I´m glad to help :good:
Click to expand...
Click to collapse
Yeah. Thanks again! So happy with my new OS!
Urgent! CPUID from apx mode
jitajt said:
so I traded an older compaq laptop for this bricked Iconia A500 and they must have really borked it up because all the "normal" unbricking methods will not work, it will not pull the update.zip from the SD card about 10 -15 minutes in I get the LNX checksum error, same thing if I try to factory reset it hangs on Erasing cache... then back to the LNX checksum error. I have tried reflashing a stock EUU ROM in APX mode but it just hangs and wont update. I was able to get the UID by using the usb traffic sniffer and I created the SKB from the website. so now I can get it in APX mode but I am new to the Tegra tablets so I have no idea what I should see or do with the nvFlash, I am a pretty techincal guy and can usually figure stuff out by using common sense but I am sure I am missing something with this nvFlash program. I notice if I send the tablet a command with nvflash (like --sync) it will come back with the normal error but it will also cut off the usb connection and to send any more commands I have to restart APX mode (while in windows, I havent noticed it do that in ubuntu) if anyone has any experience in this and knows the steps to get it back from the abyss I would really appreciate it. I have tried following sc2k's thread on the checksum errors but it won't work because I fall under the "any other recovery" and he said to contact him or post for help, I contacted him 2 days ago and haven't got an answer yet, (I am sure he is busy) so I am going to ask for help here in the meantime.
Click to expand...
Click to collapse
Hey man I'm really desperate to know how can I get my CPUID from apx mode. I foolishly formatted mmcblk0 and now it won't even boot. And the only mode I can get in is apx mode. How can I solve this? what is usb sniffer? Can you giive me the link?
felix, if you'd read the cpuid guide like i suggested you would know exactly where and how to use a usb sniffer to retrieve your cpuid... you provided bugger all details about your situation other than to say its bricked...take a deep breath and slow down, unbricking has to be done according to strict rules otherwise you'll end up going round in circles, its a process thats not gonna take 5 mins...and posting in 6month old threads expecting an answer probly isnt gonna help neither...there is an unbricking guide in my sig, post in that if you need to
dibb
What Command
jitajt said:
I got it!! I had to boot into Ubuntu and run the same nvflash command and it worked like a charm, I am currently sporting 3.2.1. now to get some ICS on this thing
thanks for your help a.chursin.
Click to expand...
Click to collapse
What was the command you use in Ubuntu to get nvflash to run? please send me the string you use, i am in the same as you was i only have apx mode on the acer a500

Have i updated my bootloader

I am trying to update my bootloader to ICS
i finally got apx mode to work after changing my rom back to Lightspeed_2.1(7.014.15_COM_GEN1) from FLEXREAPER-R14_ICS_1.033.00/1.031.00
every looked to work fine !
afterota reads
A500/G100W Serial, Cpuid, Sbk, Bootloader & Android Build Info
Generated with Afterota Lite v1.06 ( info edition ) by Gersma©
---------------------------------------------------------------
Tablet Serial : 11619222615
Tablet Cpuid : 033C120041414357
Tablet Sbk : 0xC161D201 0x441AC501 0x1B522103 0x91032103
Bootloader : 0.03.14-MUL
Android Build : Lightspeed_2.1(7.014.15_COM_GEN1)
Generated on 05/06/12 at 19:06 hr
is this correct to now put FLEXREAPER-RF1-EXTREME-EDITION_rv3-No_Games (280MB) on
i thought the boot loader would read ICS somewhere in it whats MUL???
Looks like it.
You should see it on boot. Something like "skirlax_cz's bootloader ver.4 (.03.14-UL) or something similar. (I use version 4)
MD

[Q] Please Help-Boot Failed & APX hang at BCT Backup

The last working condition of this a500 was rooted ICS OTA locked BL. Was using board method to downgrade to 3.2. Thought it loaded and worked, but on reboot got boot verfied failed. Tried flashing patched BL (Mkt bundle 17), but Blackthund APX tool was showing BCT error (which I could posit if needed) and after hitting continue it hangs at BCTbackup/saving screen in APX flash tool. Tried this a couple times with same result. I have my CPUID and SBK (for ICS). Thoughts on this or more info needed?
JCatman said:
The last working condition of this a500 was rooted ICS OTA locked BL. Was using board method to downgrade to 3.2. Thought it loaded and worked, but on reboot got boot verfied failed. Tried flashing patched BL (Mkt bundle 17), but Blackthund APX tool was showing BCT error (which I could posit if needed) and after hitting continue it hangs at BCTbackup/saving screen in APX flash tool. Tried this a couple times with same result. I have my CPUID and SBK (for ICS). Thoughts on this or more info needed?
Click to expand...
Click to collapse
i though a500 is dead, but some people are still using it, i am in the same state as you, no solution till now, of if there is i dont know now, hope someone help us.

[Q] NVFlash for A500 bootloader

I've been banging my head against a wall trying to figure this out.
I've successfully managed to root my A500, and I've installed CWM rev 1.7 for ICS Bootloader using Acer Recovery. When I reboot into recovery a messages displays "recover verified failed ..."
Now, as I understand it, it because I have a locked bootloader.
I've retrieved my CPUID and have a SBK.
But for the life of me, I can't find a valid download for the nvflash tool anywhere.
If anyone can help with unlocking the bootloader, or pointing me to the nvflash tool, that would be much appreciated.
Cheers
Paul
Check sticky in dev forum by civato. ..or the root guide in my sig
Sent from my GT-I9300 using Tapatalk

Where to from Android 3.01

I have an A500 that came with Android 3.2 and in order to root it I had to revert to 3.01. I did this but everything I run that requires keyboard input causes an FC and I can't type anything. What can I flash from here that will allow me to do a nandroid backup?
BTW, I was able to retrieve my CPUID and generate the SBK and have the drivers, fastboot and nvflash installed on a Win7 machine. adb devices run from it gave me the CPUID.
lewmur said:
I have an A500 that came with Android 3.2 and in order to root it I had to revert to 3.01. I did this but everything I run that requires keyboard input causes an FC and I can't type anything. What can I flash from here that will allow me to do a nandroid backup?
BTW, I was able to retrieve my CPUID and generate the SBK and have the drivers, fastboot and nvflash installed on a Win7 machine. adb devices run from it gave me the CPUID.
Click to expand...
Click to collapse
Thanks for all the help people! NOT!! Luckily I was able to find this forum and I'm now running 4.4.2 KitKat on my A500.

Categories

Resources