Database Users

[recovery hack] How to get back recovery 2e

Helo
I found a way to return to the recovery 2e
recovery 2e
Copying a file using the Root Explorer
# unzip and put archive contents in a folder called recovery2e on /sdcard/
# first mount -o remount,rw /system (important options in Root Explorer for do this)
# file recovery copy to /system/bin (and replace)
# xbi folder contents copy to /system/xbin/ (and replace)
Click to expand...
Click to collapse
Method by captive thanks buddy
# put archive contents in a folder called recovery2e on /sdcard/
# open a shell and get root (ADB or Terminal on Phone, type su and pres enter / accept )
# remount /system rw (busybox mount -o remount,rw /system)
# rename recovery in /system/bin to recovery3e (for backup purposes)
# copy "recovery" from /sdcard/recovery2e/ to /system/bin/ (cp /sdcard/recovery2e/recovery /system/bin/)
# copy the folder /sdcard/recovery2e/xbin/recovery to /system/xbin/ (cp -rr /sdcard/recovery2e/xbin/recovery /system/xbin/)
# enjoy!
Click to expand...
Click to collapse
Restart your phone

Isn't anyone going to comment on this?
Gurus: does it really work? That simple?
Thanks

Didn't work for me - used root explorer method. Now just hangs when I try to get recovery mode. Can get download mode ok still, and phone boots ok of course. Running JPM with root and voodoo5 3. Anything else to try?

Does not work on JPM....

it no works.
Phone: Doc's JP6 + voodoo pre3 + rooted
Method: Root explorer.
1, during copy the xbin folder to system, it shows "replace files" but after i check inside the system/xbin, the files are disappared??!! I did manually copy everything one after one from xbin to system/xbin, but i can't see where they are after copy.
2, anyway, i reboot the phone with 3b combo, the recovery mode still showing 3e.
so i say it no works. anyone tried the cable methed?

this thing work but it needs a little workaround as discussed by danzel. follow here: http://forum.xda-developers.com/showthread.php?t=774500&page=188

Could you please update the instruction for jp6 + voodoo pre4?
abd remount (don't know why) isn't working and /system is always ro so adb push and shell (adb shell works) cmd aren't working.
It is correct to remove su and busybox int the extracted folder since i have both already installed?

I was on JPM, followed the instructions.
Phone couldn't boot, lost ability to enter recovery. Luckily I could still enter Download mode, flashed to JPM, but being on voodoo kernel before that, didn't managed to disable lagfix before getting into this trouble - Couldn't revert back to RFS, and without ability to enter recovery to format.
Finally reverted back to Eclair firmware, could see my beloved recovery again. No way I'm going through the above again.
The above is just my own experience, for reference just in case someone is as unlucky as me.

This is the clear step on recovering the recovery2e
Recover recovery2 e
1. uncompress the downloaded file recovery 2e and copy the direcotry to sdcard and rename it to recovery2e
2. Using root explorer copy File recovery from recovery2e on sdcard to /system/bin
3. Using root explorer copy Folder recovery in xbin to /system/xbin
4. If did not work try copy xbin folder over /system/xbin folder

Ok, confirmed working for me on JPM+Voodoo.
I installed Rom Manager too, and CWM Recovery is fully working too!! TNX

xtrememorph said:
This is the clear step on recovering the recovery2e
Recover recovery2 e
1. uncompress the downloaded file recovery 2e and copy the direcotry to sdcard and rename it to recovery2e
2. Using root explorer copy File recovery from recovery2e on sdcard to /system/bin
3. Using root explorer Folder recovery in xbin to /system/xbin
Click to expand...
Click to collapse
Your method DO NOT work at all. I cannot enter recovery mode.
Fortunately download mode is still available.
JPM+Voodoo5 pre6

lagigia, what didn't work for you?
Here's what I did:
put archive contents in a folder called recovery2e on /sdcard/
open a shell and get root
remount /system rw (busybox mount -o remount,rw /system)
rename recovery in /system/bin to recovery3e (for backup purposes)
copy "recovery" from /sdcard/recovery2e/ to /system/bin/ (cp /sdcard/recovery2e/recovery /system/bin/)
copy the folder /sdcard/recovery2e/xbin/recovery to /system/xbin/ (cp -rr /sdcard/recovery2e/xbin/recovery /system/xbin/)
enjoy!

if using the root explorer method, copy xbin folder content, do not try to overwrite the entire dir on top.

mike.sw said:
if using the root explorer method, copy xbin folder content, do not try to overwrite the entire dir on top.
Click to expand...
Click to collapse
too late is there a way to solve it or get a step back?
thx!

i think u can just flash only the old kernel back and it will be fixed (only zimage).

captive said:
lagigia, what didn't work for you?
Here's what I did:
put archive contents in a folder called recovery2e on /sdcard/
open a shell and get root
remount /system rw (busybox mount -o remount,rw /system)
rename recovery in /system/bin to recovery3e (for backup purposes)
copy "recovery" from /sdcard/recovery2e/ to /system/bin/ (cp /sdcard/recovery2e/recovery /system/bin/)
copy the folder /sdcard/recovery2e/xbin/recovery to /system/xbin/ (cp -rr /sdcard/recovery2e/xbin/recovery /system/xbin/)
enjoy!
Click to expand...
Click to collapse
Thanks, works fine on JPM/JP6

Could we get a newbie friendly guide please. Get root. What does that mean and should i just type what you quoted. Thanks
Sent from my GT-I9000 using XDA App

Edited the first post and put the new, easy tutorial

Could i get some background on this, please?
Is it correct that:
1) recovery2e is the default samsung recovery?
2) new versions of recovery2e can't apply all the update.zip we were able to apply with the older versions? (unsigned, signed??)
3) This is why we need the old recovery2e to replace the new one?
4) Where did the issue started? Since Froyo releases?
5) Is this why we can't root Froyo FWs with an update.zip anymore like it was the case with Eclair?
I'm really sorry if this is kinda obvious but i never really saw any clear explanation about this. Hope someone could clear it up for me

1) Yes
2) Correct on recovery 2e you can't apply all the update.zip
4) Yes, New tutorial on fist post
4) The JPM ROM brings new recovery 3e
5) You can root phone by flash kernel with root by odni

Downgrade HELP

Hi,
I've a big problem, my friend upgrade his SGS to the official 2.2 BUJP8, i try to use adb reboot recovery to flash the bootloader, to unlock 3button combo, but it doesn't go into. It reboot.
I've intall kies, close all processus, use latest busybox from Titanium backup, USB debuging on, and use the default Home (touchwiz).
But no way it doesn't work.
Naturally recovery doesn't work (unable to flash unsigned zip). I try to use clockwork recovery from rom manager but it seems to be unsigned too. So i don't know what i should do.
#
# Edit
#
Copying a file using the Root Explorer
# unzip and put archive contents in a folder called recovery2e on /sdcard/
# first mount -o remount,rw /system (important options in Root Explorer for do this)
# file recovery copy to /system/bin (and replace)
# xbi folder contents copy to /system/xbin/ (and replace)
Click to expand...
Click to collapse
But doesn't work,
So i try with the cable method
Method by captive thanks buddy
# put archive contents in a folder called recovery2e on /sdcard/
# open a shell and get root (ADB or Terminal on Phone, type su and pres enter / accept )
# remount /system rw (busybox mount -o remount,rw /system)
# rename recovery in /system/bin to recovery3e (for backup purposes)
# copy "recovery" from /sdcard/recovery2e/ to /system/bin/ (cp /sdcard/recovery2e/recovery /system/bin/)
# copy the folder /sdcard/recovery2e/xbin/recovery to /system/xbin/ (cp -rr /sdcard/recovery2e/xbin/recovery /system/xbin/)
# enjoy!
Click to expand...
Click to collapse
But adb doesn't want to remount /sytem
Remount failed: No such file or directory
Drivers are installed, and when adb devices it show my phone, it is in usb debuging.
I'm lost...
I also try Kies Hack, but <CTRL left>+<ALT left>+U+P doesn't work it show no popup of TEST MODE..
HELP plz
Thanksss
I try to use the recovery hack
Pleaaaase i need HELP!
^^
Thanks a lot!

No one can help me?
Snif

Flash with Odin .
jje

[Q] Create Nandroid Backup Without recovery

Hi Guys
recently i bought a Samsung Galaxy Pro b7510
until now this phone doesnt have any custom recovery
i am trying to make a nandroid backup through ADB shell but i cant find the phone's partitions
i am using this command to find them
Code:
cat /proc/mtd
but it says that there is no such file directory
what should i do ?!
my phone is rootet
i wanna port clockworkmod recovery for this phone but first of all i want to have a full recovery from my phone in case if something went wrong i will be able to save my phone.

If I get what you say, then this is really easy.
Code:
mkyaffs2image /system system.img
mkyaffs2image /data data.img
mkyaffs2image /cache cache.img
md5sum *img > nandroid.md5
And put the 4 files inside /sdcard/clockworkmod/backup/nameOfBackup/
Cheers,
D4.

D4rKn3sSyS said:
If I get what you say, then this is really easy.
Code:
mkyaffs2image /system system.img
mkyaffs2image /data data.img
mkyaffs2image /cache cache.img
md5sum *img > nandroid.md5
And put the 4 files inside /sdcard/clockworkmod/backup/nameOfBackup/
Cheers,
D4.
Click to expand...
Click to collapse
thanx for reply but it says
mkyaffs2image not found

Cust images for official 2.3.5 GB - U8800

Hi there!
Anyone willing to paste official images for U8800: (V100R001C00B522G001)
recovery.img
boot.img
cust.img
amss.mbn
EMMCBOOT.MBN
Thanks!
S.

If i am honest i need only boot.img
Brgds,
S.

I need the whole non-modified image folder. /.cust_backup/image/
Little guide for making a dump.zip
1. Download Busybox installer
2. install Busybox to /system/xbin;
3. enter these commands from terminal;
4. su
5. cd /sdcard
6. chmod 777 /system/xbin/busybox
7. /system/xbin/busybox tar czvf dump.tar /.cust_backup
A dump.zip is saved at your sd-card
I am unable to do this because I have modified cust.img and recovery.img. Installing stock firmware doesn't work..

Check my MediaFire in the signature. I have cust_data separated from cust because cust_data is carrier specific.
Sent from my U8800

[TOOLS][ADB][Windows]Push files to device through ADB*now include deodex tools*

See my previous post before in post#2
This is a simple batch file using ADB..
With this you can use ADB to manage your file or APK , Backup, Push Your File to device, or pull file from device..
ADB Work on Stand by Mode (Home Screen) or in Recovery Mode, just set it up..
Extract ADBTOOLSv1.0.1.zip and you will find :
command.bat : Windows Batch Command
_BACKUP_OUT : folder where your backup process done and made
_FLASHING_OUT:
folder for flashing your :
kernel (place your boot.img here)
recovery (place your recovery.img here),
modem (place your modem.bin here)--only for gt p7300
_MODDING_FILE: Folder where your file were created by PULL process
Folder where file for PUSH process should be here
_BATCH_INSTALL : place your APK here for batch install
tools: ADB.exe and busybox binary
success_APK : A folder created for All apk from _BATCH_INSTALL move here after instalation.
Click to expand...
Click to collapse
Notes:
ADB can access all file from device from CWM Recovery, especially CWMR 5.5.0.4
ALL you need to do is:
From Recovery menu, you need to mount /data and /system for ADB working..
THEN, From Command Prompt set ADB Mode to "recovery".(This Batch File set ADB mode to "Home Screen" by default)
So when you use ADB from Online device ( I mean a stand by device).. you dont need to change ADB Mode..
After you set up, you can use ADB as you like..
Code:
=============================================================================
:::: ADB TOOLS FOR GT P7300 and P7310 by suwandiapr
-----------------------------------------------------------------------------
| [*] Before use read this:
| --make sure you have installed adb drivers for your device
| --enable "USB DEBUGGING"
| from (Menu\Settings\Applications\Development)
| --enable "UNKNOWN SOURCES"
| from (Menu\Settings\Applications)
| --increase screen timeout to 10 minutes
| --connect USB cable to PHONE and then connect to PC
| --MAKE SURE YOU HAVE A ROOTED DEVICE AND BUSYBOX
| --Place the right file in the right folder
| --Some feature like Flashing need more tester..so please be aware
| --If you use adb recovery feature, set ADB Mode to recovery
| mount /data and /system from your device recovery
| --If you use adb from homescreen, set ADB Mode to HomeScreen
| --All you Do is your own Risk, use with carefull
-----------------------------------------------------------------------------
****Turn on the screen and allow superuser permission when asked!****
_____________________________________________________________________________
| Current MODDING FILE: NONE | ADB MODE :HomeScreen | sdcard path: /sdcard/|
=============================================================================
:::: ADB PULL ::::
=============================================================================
0 Pulling file from /data ( see result in _MODDING_FILE)
1 Pulling file from /system partition ( see result in _MODDING_FILE)
2 Pulling file from SDcard ( see result in _MODDING_FILE)
3 Backup recovery ( see result in _BACKUP_OUT)
4 Backup Kernel ( see result in _BACKUP_OUT)
5 Backup modem (for P7300 only-see result in _BACKUP_OUT)
6 Backup /system (tar format-see result in _BACKUP_OUT)
7 Backup /efs (tar and .img format-see result in _BACKUP_OUT)
8 Backup APK from /data/app (tar format-see result in _BACKUP_OUT)
=============================================================================
:::: ADB PUSH ::::
=============================================================================
9 Pushing file to /data ( from _MODDING_FILE to device)
10 Pushing file to /system ( from _MODDING_FILE to device)
11 Flashing recovery ( from _FLASHING_OUT to device)
12 Flashing Kernel ( from _FLASHING_OUT to device)
13 Flashing modem for GT P7300 ( from _FLASHING_OUT to device)
=============================================================================
:::: Setting ::::
=============================================================================
14 Set current working File ( for PUSH and PULL )
15 Install busybox on device (need root)
16 Set ADB mode (if you on recovery mode)
17 Install apk ( from _MODDING_FILE to device)
18 Install batch apk ( from _BATCH_INSTALL to device)
=============================================================================
:::: Reboot Menu ::::
=============================================================================
19 Reboot System
20 Boot Into Recovery
21 Reboot Bootloader
22 Quit

My previous post
inspiration from congox case
when you got a problem with bootlop and you forget make a nandroid backup
only have file from other ROM with flashable.zip and need to push the file from your computer to device
you have a recovery support with mount /system and mount /data (tested on CWM 5.5.0.4 and overcome CWM 5.1.2.6) and you can enter this menu while bootloop happen..
STEP 1 : MANUAL
Connect your device with computer
From device, Go to recovery - mounts and storage - mount /system and mount /data
From your computer go to adb terminal and type this
Code:
adb shell "ls /data/media/"
If you can see list of file from your device sdcard, so you make adb work for your device ..
Place your zip file on your path, says on C://backup.zip and you want to copy the file to /sdcard/download/ and type this code
Code:
adb push backup.zip /data/media/download/.
wait for copying progress done..
After you done with moving file to device sdcard, check content of your sdcard with this code
Code:
adb shell "ls /data/media/download/"
When you found your file from list, you can flash backup.zip from recovery
STEP 2 : WINDOWS BATCH FILE
I made a simple Batch File for windows (sorry i dont have MAC or LINUX distro) , this file will make a folder with name "emergency" in SDCARD and with your files inside that.
Extract the FLASHER.rar somewhere on your Local folder,example: on your " Desktop" Folder
in folder "FLASHER" you will find runme.bat and folder "files"
Rename your file ((flashable.zip files you want to send through ADB) to "backup.zip" and then Put your file into this path /FLASHER/files/myfiles/ (just replace the existing "backup.zip" with files from yours)
Connect your tab with Computer
Reboot into Recovery Menu from your device
From menu Mounts and Storage choose mount /system and /data
From your Computer go To Folder flasher and klik runme.bat
Follow the instruction on window untill copying process done and device reboot to recovery again (copying process will take a minutes depend on your file size)
Now you can flash a emergency ROM from recovery
Window instruction
Code:
-----------------------------------------------------------------------------
ADB EMERGENCY COPYING TOOL for TAB 8,9
created by SUWANDIAPR
-----------------------------------------------------------------------------
[*] This script will:
(1) COPY YOUR FILE FROM COMPUTER TO SDCARD/emergency/*
(2) CHECKING YOUR CONNECTED DEVICE DIRECTORY
[*] Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) make sure u have installed CWM 5.5.0.4 ON YOUR DEVICE
(3) connect USB cable to PHONE and then connect to PC
(4) Rename your Flashable .zip file with "backup.zip"
and place inside "myfiles" folder on your Computer
(5) from Recovery Menu, Choose "Mounts and storage" then
-mount /system and -mount /data
(6) CONNECT YOUR TAB WITH PC WHILE ON RECOVERY MENU
---------------------------------------------------------------
CONFIRM ALL ABOVE
Sorry for my Bad english, if there is somebody want to correct every words i use , im very welcome and will change with the proper words and sentence..
Hope this help someone..

Nice guide, thanks!!

I needed some help with mounting the system using adb through a batch file.
I use this command
adb -d shell mount -o remount rw /system
But the mounting fails (I have a rooted phone )
pleas help me I know this is off topic

2 possible reasons for this command to fail:
- /default.prop (on the phone) contains the following line: "ro.secure=1". Then you need another boot.img (in fact just a modified ramdisk). look for "unpack-bootimg.pl" or "unpackbootimage" you may find a guide how to do this manually (not too easy). A rooted kernel would also do the trick.
you can check your default prob with this command "adb shell cat /default.prop".
- in some cases mount requires more parameters. try "adb shell mount" and look for the line containing "/system". In front of system is the "device-name". in my case the mount command would look like this:
mount -o remount,rw /block/dev/mmcblk0p24 /system
hope this helps and sorry for answering off-topic questions....

nail16 said:
I needed some help with mounting the system using adb through a batch file.
I use this command
adb -d shell mount -o remount rw /system
But the mounting fails (I have a rooted phone )
pleas help me I know this is off topic
Click to expand...
Click to collapse
you can use busybox and call the binary from the shell
i assume that your device in normal mode ( in home screen)..
here some example..
Code:
su
adb push busybox /tmp/.
adb shell "chmod 755 /tmp/busybox"
adb shell "tmp/busybox mount -o remount,rw /system"
after you type "su" superuser will prompt a request, choose "allow".
glitschi667 said:
2 possible reasons for this command to fail:
- /default.prop (on the phone) contains the following line: "ro.secure=1". Then you need another boot.img (in fact just a modified ramdisk). look for "unpack-bootimg.pl" or "unpackbootimage" you may find a guide how to do this manually (not too easy). A rooted kernel would also do the trick.
you can check your default prob with this command "adb shell cat /default.prop".
- in some cases mount requires more parameters. try "adb shell mount" and look for the line containing "/system". In front of system is the "device-name". in my case the mount command would look like this:
mount -o remount,rw /block/dev/mmcblk0p24 /system
hope this helps and sorry for answering off-topic questions....
Click to expand...
Click to collapse
yes you right glistchi, samsung lock adb root on new firmware on my SG- Note..
And make me flash an older firmware for rooting..

new update

Never mind, got it to work

i want to push same file in data system (/data/data) but my tab is not root. can i??

if from cwm recovery, yes you can.. if from stand by mode (home screen) the answer is no... you need root to make it happen..

i got this error
please help