[Q] Problem installing IGO PRIMO after installing a new Rom - HD2 Android Q&A, Help & Troubleshooting and Genera

Hello everyone :crying:
After installing "NexusHD2-ICS-CM9-HWA_V2.8.zip - ZIP Rom ( By the way, beautiful Rom Thanks to tytung. )
I'm trying to install IGO PRIMO for android 800X480 and I get the following message:
user interface resolution [0x0] is not suppotted or cpmpatible skin can not be found,exiting applifation
Can anyone give me a suggestion for a solution ?
avi1961

I managed to install IGO PRIMO But now I have another error message.
"unsupported voice, please see the log".
Does anyone know how to solve the problem? And where IS the "LOG" ?

avi1961 said:
I managed to install IGO PRIMO But now I have another error message.
"unsupported voice, please see the log".
Does anyone know how to solve the problem? And where IS the "LOG" ?
Click to expand...
Click to collapse
you have to erase some old voices, which are not supported. but if you just accept the message igo will work normal.

I managed to install the rum NexusHD2-ICS-CM9-HWA_V2.8.zip - ZIP after many attempts and reading many guides.
I'm trying to install igo primo and get a message user interface resolution [0x0] is not suppotted or cpmpatible skin can not be found, exiting applifation
I installed software that checks the Rzlotziit screen "screen size" and it somehow shows me that Rzlotzih of "your screen height in pixels is 505
And your screen width in pixels is 320.
I think that's why I can not install igo primo.
Have installed some applications such as vplayr or mega flash or app 2 sd pro, etc. can cause a change in the definition of Rzlotzit screen?
(I know that pictures etc. can interfere with ...)
Thanks in advance to the experts.
avi1961

avi1961 said:
I managed to install the rum NexusHD2-ICS-CM9-HWA_V2.8.zip - ZIP after many attempts and reading many guides.
I'm trying to install igo primo and get a message user interface resolution [0x0] is not suppotted or cpmpatible skin can not be found, exiting applifation
I installed software that checks the Rzlotziit screen "screen size" and it somehow shows me that Rzlotzih of "your screen height in pixels is 505
And your screen width in pixels is 320.
I think that's why I can not install igo primo.
Have installed some applications such as vplayr or mega flash or app 2 sd pro, etc. can cause a change in the definition of Rzlotzit screen?
(I know that pictures etc. can interfere with ...)
Thanks in advance to the experts.
avi1961
Click to expand...
Click to collapse
The unsupported resolution is due to the softkeys.
Disable them or install a rom where you can disable them on the fly. (eg. PA, PACman, AOKP, etc.)

I understand that first I delete all the programs I installed and then install the IGO and then bring them back and then everything should be arranged?
avi1961

avi1961 said:
I understand that first I delete all the programs I installed and then install the IGO and then bring them back and then everything should be arranged?
avi1961
Click to expand...
Click to collapse
No thanks,
As long as the softkeys/navigation bar is active, igo will not work.
Download - http://nexus-hd2.googlecode.com/files/Softkeys_Switcher_for_NAND_and_NativeSD.zip and disable the softkeys.

gogodu5sU said:
No thanks,
As long as the softkeys/navigation bar is active, igo will not work.
Download - http://nexus-hd2.googlecode.com/files/Softkeys_Switcher_for_NAND_and_NativeSD.zip and disable the softkeys.
Click to expand...
Click to collapse
Thank you for the link.
Can you explain how and where to install the file.
Thank you
avi1961

avi1961 said:
Thank you for the link.
Can you explain how and where to install the file.
Thank you
avi1961
Click to expand...
Click to collapse
How? -Same as rom.
Where? -In recovery.
Choose Nand/NativeSD, choose to disable the softkeys, reboot.:fingers-crossed:

How is it going avi1961?

First, gogodu5sU ' Thanks for the help.
I need to Open the rom and just install the new folders instead of the recurrence of the same name, then do reboot ?

You're Welcome.
The link i posted is from the same thread you downloaded the rom. It's from tytung.
see under "Extra Downloads - Softkeys_Switcher_for_NAND_and_NativeSD.zip" - http://forum.xda-developers.com/showpost.php?p=21173918&postcount=1
That zip-file is not a rom. It only disables or enables the softkeys for your rom. That's all it does.
0.Put Softkeys_Switcher_for_NAND_and_NativeSD.zip on your SD-card
1.You boot into recovery (same as installing a rom)
2.Choose to install Softkeys_Switcher_for_NAND_and_NativeSD.zip
3.Aroma installer will open
4.Choose Nand or NativeSD (i am not certain/i don't know where you installed the rom)
5.Choose Disable softkeys/Navigation bar
6. Press Ok
7. reboot.:fingers-crossed:

First of all thank you for the help.
I installed the software and indeed is disable the softkeys.
But I did not understand two things 1) You wrote choose to disable the softkeys and tytung writes After enabling Softkeys.
And second, where is the enable/disable the virtual softkeys ?
I installed the Softkeys_Switcher_for_NAND_and_NativeSD.zip
And then installed the Power Button / Softkey Mod
And I can not find the enable/disable the virtual softkeys.

In Order to use IGO install the 800x480 Version in Landscape mode!!! Softkeys in Landcape = 0 !
Also you must start IGO in Landscape mode. After it starts, it can be used in Portrait also.

jskenderi said:
In Order to use IGO install the 800x480 Version in Landscape mode!!! Softkeys in Landcape = 0 !
Also you must start IGO in Landscape mode. After it starts, it can be used in Portrait also.
Click to expand...
Click to collapse
Can you explain to me how to do it?

avi1961 said:
I managed to install IGO PRIMO But now I have another error message.
"unsupported voice, please see the log".
Does anyone know how to solve the problem? And where IS the "LOG" ?
Click to expand...
Click to collapse
Add the following to your sys.txt file:
[sound]
csv_voice_enabled=1

Related

looking for screen rotate.exe

would a kind soul please upload the screen rotate.exe file from the universal please.thanks
faria said:
would a kind soul please upload the screen rotate.exe file from the universal please.thanks
Click to expand...
Click to collapse
I need it too for tomtom as to rotate mi maps .. plz upload .
anyone? pls!
Here you go guys.... the screen rotaion app.... install and map it into any key so you don't need to open programs folder to rotate your scree..... just press the mapped key and it will rotate the screen....
Thanks for the cab.
But this cab rotated my HD2 online to the right side. Is it possible to rotated to the left side? i don´t finde any option for this.
hi when I install this is coming up with'
an unexpected error has occured in Rotate sreen.exe Select quit and then restart program....
This app requires a newer application of Microsoft .NET compact framework to be installed on this device..
What does this mean?
I have the latest ROM Update form HTC ie 1.66
ALSO IS THERE A CAB
so the light flashes red when you got a miss call
Blue for message etc?
Is this possible?

[rel][i780] More configurable HW buttons...

Hello...
A small app in attachment. It SHOULD add possibility of configuring 3 more buttons
of any WM6.1 Samsung SGH-i780...
Unfortunately, only application shortcuts may be assigned (namely no <command> commands)
any chance to change the hold red button? ive been wanting to remove the keypad lock and change it into s2u2.. so far no software can do that
patch does not work
Well, it works in my case
edited a few things in cab to allow installing.. now it works!
thanks _TB_TB_.. this is a great addition
still asking if its possible to also change the keylock on the red hold button?
None I'm aware of...yet. Patience
It's great stuff, work fine BUT
"Start Hold" is not working on my BKHE1
can't install this on my J2/I2 version i780.. something about system permission in the installer cab.
_TB_TB_ said:
Hello...
A small app in attachment. It SHOULD add possibility of configuring 3 more buttons
of any WM6.1 Samsung SGH-i780...
Unfortunately, only application shortcuts may be assigned (namely no <command> commands)
Click to expand...
Click to collapse
Good Work!
ejoya said:
edited a few things in cab to allow installing.. now it works!
thanks _TB_TB_.. this is a great addition
still asking if its possible to also change the keylock on the red hold button?
Click to expand...
Click to collapse
Hello.
Can You post that changed cab (of course with TB_TB_ premission)? I have also problem with installation (lack of permission). Maybe it`s a problem with my official I1 WM6.1 ROM?
I have found that Your CAB can be installed, but there is some conflict with RealVGA, becouse without RealVGA it instals and run properly, but after instaling RealVGA system don`t permit to install it.. Weird..
WM 6.0
How to install on WM 6.0?
Best regards.
thank u for this fantastic hacks!
never try this patch to russian layout+EFN 5.0 - cos u you will need to hardreset.
Nice Hacks
Thank you, for the hacks
I'm also getting the permission error whenever I try this. I'm using EFN's 96DPI 5.0 Standard ROM. How do we fix that? I would really love to be able to change the End Key Hold short cut to point to the regular task manager 'cause the Samsung Task Manager looks funny when used on a 96 DPI ROM.
Thanks!
*nevermind - problem solved*
Can someone please post solution for the permission problem? How did u fix it?
Author please post solution to fix permission issue.
Thx
Please Vote : http://forum.xda-developers.com/showthread.php?t=923045
and reply too ! thanks

[21.01.2009] HTC-HD FIX on-screen-slide

This is a cab file of clean install + uninstall version of the official working:
HTC HD fix for on-screen-sliding on calling.
the official fix is an exe + checking some stuff. I disasm and looked into if there are some other hidden necc. informations in dll's. but nothing more is needed.
here my version is a "clean install cab"
Q&A:
Q:What is inside of this cab installer ?
A: There are only 2 dll's which will be copied to \windows.
The files are: "phcanhtc.dll" and "rilphone.dll".
-
Q: is uninstall possible ?
A: Yes, the uninstall only remove this 2 dll's and after reboot the original ROM files will be inplace.
have phun
cu camel
Camel,
Thanks for doing this cab file. I had a few problems with the official exe file. It would not install saying that it needed the correct version.
The original was not very good. I kept cutting off incoming calls. Hopefully all will now be well.
Regards,
Stefan
Thanks for the file. I tried it but it seems that i´m doing something wrong. I have installed and uninstalled the file but I still can´t install the hotfix for the display flicker. it says still that it is not the correct version.
Would it be possible for you, to teach me, how I can solve this problem step by step?
Sorry but I´m not so used with Windows mobile.
Many many thanks
I do apologise, but what does this actually fix?
Hi, it fixes the bug with the flicker title bar of the touch flo 3D where the network is shown.
mannhans said:
Hi, it fixes the bug with the flicker title bar of the touch flo 3D where the network is shown.
Click to expand...
Click to collapse
No. It fixes the slow response to the slider for answering calls. Installed it yesterday and I personally have seen a great improvement in response.
Thanks for the work camro.
After installing the slider fix, does anyone get a delay in being able to hear the person on the other end after picking up - sort of 2-3 sec delay?
Petrov.
After installing the slider fix, does anyone get a delay in being able to hear the person on the other end after picking up - sort of 2-3 sec delay?
Click to expand...
Click to collapse
You may try to install the "Advanced Configuration Tool" from which you can change the default delay of 2-3 secs and make it less than 1.
If anyone else knows the registry key that defines this delay, please publish the information.
pl4tonas said:
You may try to install the "Advanced Configuration Tool" from which you can change the default delay of 2-3 secs and make it less than 1.
If anyone else knows the registry key that defines this delay, please publish the information.
Click to expand...
Click to collapse
Where do I find the setting for delay in Advanced Config Tool?

[APP] [CAB] Topaz Comm Manager VGA (Raphael and Diamond)

I have made a CAB with the new Topaz comm manager and its applets.
http://rapidshare.com/files/219499651/Topaz_Comm_Manager.cab
Sometimes in the first install it requires to turn Wifi on and off from setting to get it grayed out.
can you made a version for QVGA thanks mod
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Update: You were right - SDKCerts must be installed first. Thanks again. Posted it here as well http://www.fuzemobility.com/touch-pro-2-communications-manager-ported/
bugsykoosh said:
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Click to expand...
Click to collapse
+1 to this error. About halfway through the install (bars are at about 50%)
it gives me the ''does not have sufficient system permissions'' error.
Running a CDMA 21042 Diamond ROM.
Can this file be posted elsewhere? TQ
I can mirror if i can get a copy on 4shared site.
TQ
bugsykoosh said:
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Click to expand...
Click to collapse
NO it worked on 20000, in fact i am using it. Have you installed sdkcerts?
Greeat job wow its bad ass good find an thanx for this cab!!! little goodies are always fun lol
Please
Someone please port for QVGA.
Paul
Does it work on WVGA (Touch HD Blackstone with stock English ROM build 20757)?
nwradu said:
Does it work on WVGA (Touch HD Blackstone with stock English ROM build 20757)?
Click to expand...
Click to collapse
I second that ! I got a french cooked rom, a great rom, but I miss really the new comm manager.
Works on WVGA!
I'm using it on my german Xperia X1
Chris
this one works. the problem is the dlls arent signed.
http://forum.ppcgeeks.com/showthread.php?t=64195
I am running NATF 4.5's, it installs but i can't get the advanced settings for wifi or phone, only the advanced options for bluetooth works. Tapping the center, or the far left side doesn't do anything for me on those two options.
It works well, thank you.
Well, I have the sdkcerts.cab installed (I had to for XboxMod's Rhodium), but I still get the error during installation that have insufficient permissions.
I tried installing sdkcerts again, but it quickly returns stating it was successfully installed on my device. The new Comm Mgr cab still refuses to install.
I am running with the AT&T leaked test ROM if that makes a difference.
ap4lifetn said:
I am running NATF 4.5's, it installs but i can't get the advanced settings for wifi or phone, only the advanced options for bluetooth works. Tapping the center, or the far left side doesn't do anything for me on those two options.
Click to expand...
Click to collapse
Same happens to me on my NATF 4.3's.
imreolajos said:
Well, I have the sdkcerts.cab installed (I had to for XboxMod's Rhodium), but I still get the error during installation that have insufficient permissions.
I tried installing sdkcerts again, but it quickly returns stating it was successfully installed on my device. The new Comm Mgr cab still refuses to install.
I am running with the AT&T leaked test ROM if that makes a difference.
Click to expand...
Click to collapse
OK, it it is not a cooked ROM you have to run the patch that allows to run unsigned software.
What patch?
caldito said:
OK, it it is not a cooked ROM you have to run the patch that allows to run unsigned software.
Click to expand...
Click to collapse
if i install this, will it be in english, or will it be in the language of my rom and manila? my phone is in russian, will this new comm manager have the proper mui files??
thanks
Secondary pages not showing
I installed the package on my stock rom AT&T Fuze. The main function works great. I was even able to use the Advanced Configuration utility to add the selectable 3G item. However, the only secondary page that works for me is the Blutooth page. All others just light up the item for a moment then shut it off---no secondary page displayed. Has anyone else had this issue?

help needed

Pals,
I had 2 questions :
1- I built a rom, but its always stucked after pressing skip button on password screen when 1st run, any one know which package cause this problem!!
2- How i can change the OS number in boot loader screen!
3- how i can get today plugin work!!
4- what packages needed in order to let Camera work?
Thx
1- I don't know, post your build_log.txt from the root of the kitchen so I can see what packages you have enabled.
2- I don't know, I don't think our devices support changing that.
3- If your installing Manila it enables itself by default. If your trying to change the default I believe one of the tutorials here could help you.
XirXes said:
1- I don't know, post your build_log.txt from the root of the kitchen so I can see what packages you have enabled.
2- I don't know, I don't think our devices support changing that.
3- If your installing Manila it enables itself by default. If your trying to change the default I believe one of the tutorials here could help you.
Click to expand...
Click to collapse
[/QUOTE]
ok pal, when i generate dsm files? if i add new package??
http://rapidshare.com/files/292135866/Build_log.zip.html
anybody can upload new remapped phone canvas to me?? thx...
mua30 said:
Pals,
I had 2 questions :
1- I built a rom, but its always stucked after pressing skip button on password screen when 1st run, any one know which package cause this problem!!
2- How i can change the OS number in boot loader screen!
3- how i can get today plugin work!!
4- what packages needed in order to let Camera work?
Thx
Click to expand...
Click to collapse
1. we talk about WM 6.5 OK,
A. Disable auto setup, auto setup only compatible with wm 6.1
B. Connection setup in Official OPAL and other HTC device always crash with ADC, so choose ADC or Conection setup only.
2. You don't need to change it, Why do you want to change it?
3. What kind of today plugin? M2D? or default WM 6.5 titanium plugin?
4. camera driver and camera application, usually camera driver is in the OEM, and camera app in the separate folder inside EXT
BesFen said:
1. we talk about WM 6.5 OK,
A. Disable auto setup, auto setup only compatible with wm 6.1
B. Connection setup in Official OPAL and other HTC device always crash with ADC, so choose ADC or Conection setup only.
2. You don't need to change it, Why do you want to change it?
3. What kind of today plugin? M2D? or default WM 6.5 titanium plugin?
4. camera driver and camera application, usually camera driver is in the OEM, and camera app in the separate folder inside EXT
Click to expand...
Click to collapse
Thx Besfen, another question, do u have remapped phone canvas in order to fill the screen correctly without appearing of scroll bar when dialing!!
mua30 said:
Thx Besfen, another question, do u have remapped phone canvas in order to fill the screen correctly without appearing of scroll bar when dialing!!
Click to expand...
Click to collapse
Cook in this package and it should fix it. It worked for me with Mega's phonecanvas which I recommend as it works correctly with 6.5. I don't know if it will work with older ones but you can give it a try.
XirXes said:
Cook in this package and it should fix it. It worked for me with Mega's phonecanvas which I recommend as it works correctly with 6.5. I don't know if it will work with older ones but you can give it a try.
Click to expand...
Click to collapse
Just import it or replace its contents with phone canvas!!!
mua30 said:
Just import it or replace its contents with phone canvas!!!
Click to expand...
Click to collapse
Its funny what is going on, after flashing the today in control panel is working, after turining off the mobile and turning on its not!!!
i am doing HD 2 times, hope its work!
Any advise!!

Categories

Resources