Database Users

[Q] Possible Brick?

I'm selling my Nexus 7 and I think I got a little click happy while clearing it out.
I had reinstalled 4.3 and then for some reason I formatted the data. Got stuck in a boot loop.
When I try to install the image again I get the following:
Updating partition details...
E:error opening '/data/media'
E:error: no such file or directory
Any help would be appreciated!

"90% of the time, when someone says something's bricked, the only brick is their head." - Koush
All this means is that your userdata partition got all jacked up. It's restored when you boot into a rom, but of course you can't boot into a rom cause something else must have also went awry. So I suggest you wipe everything and start over. Follow along with me, this will be fun!
Boot into fastboot, send fastboot unlock command if your bootloader isn't already unlocked "fastboot oem unlock." Accept on screen. Reboot back into bootloader/fastboot. Issue FASTBOOT ERASE USERDATA, FASTBOOT ERASE RECOVERY, FASTBOOT ERASE CACHE, FASTBOOT ERASE SYSTEM. Then flash TWRP recovery using FASTBOOT FLASH RECOVERY [NAME OF TWRP GROUPER IMG]. Then adb push your rom and gapps back to your tablet using ADB PUSH [FILE] /SDCARD, then flash your rom and enjoy a fresh clean tablet!

That's why I prefixed with 'possible'...
Thanks - I followed this guide later in the evening and got it all up and going again.
http://goo.gl/BsiewY
0vermind said:
"90% of the time, when someone says something's bricked, the only brick is their head." - Koush
All this means is that your userdata partition got all jacked up. It's restored when you boot into a rom, but of course you can't boot into a rom cause something else must have also went awry. So I suggest you wipe everything and start over. Follow along with me, this will be fun!
Boot into fastboot, send fastboot unlock command if your bootloader isn't already unlocked "fastboot oem unlock." Accept on screen. Reboot back into bootloader/fastboot. Issue FASTBOOT ERASE USERDATA, FASTBOOT ERASE RECOVERY, FASTBOOT ERASE CACHE, FASTBOOT ERASE SYSTEM. Then flash TWRP recovery using FASTBOOT FLASH RECOVERY [NAME OF TWRP GROUPER IMG]. Then adb push your rom and gapps back to your tablet using ADB PUSH [FILE] /SDCARD, then flash your rom and enjoy a fresh clean tablet!
Click to expand...
Click to collapse

Nexus 7 Bricked??/Broken

Nexus 7 was rooted,unlocked bootloader and was running paranoid anroid 3.90+ i think . i plugged it into the computer to get a new rom using nexus root toolkit v1.7.2. i was asked to update a few things, so i clicked yes. i then tried to flash stock + unroot and chose 4.3 cause i wanted to try the new OS. but i guess something happened because when i turned my nexus 7 back on i was stuck on the load screen (GOOGLE image with a unlocked lock) i could cycle thru a few options using volume keys (start,recovery,power off) .all of them seemed useless as they would just bring me back to where i was.when clicking start "booting failed" come up on the upper left side. when trying to flash stock +unroot using NRT i get up to the sending "bootloader" part and my nexus 7 just freezes, how do i fix this. please and thanks

download the factory image from the google factory image and extract the archive.
try flashing the bootloader manualy with fastboot.
locate your fastboot binary and copy the bootloader image to that directory.
open a commandline in that directory and type
fastboot flash bootloader name-of-bootloader.img
after that you can try to flash the whole factory image with the flash-all.sh script.

Simple
dieselmonkeyy said:
i could cycle thru a few options using volume keys (start,recovery,power off) .all of them seemed useless as they would just bring me back to where i was.when clicking start "booting failed" come up on the upper left side.
Click to expand...
Click to collapse
Boot failed??? That's a bad flash of the stock ROM. I had the same problem at my first attempt trying to flash Stock ROM, but don't worry! Let's do this:
WARNING: Before you continue you are accepting that I'm not responsible of anything can happen to your Nexus and your battery is fully charged.
When you download the stock ROM you have to uncompress the zip file. You will find the bootloader and another zip.
Uncompress that zip file, put fastboot program, the bootloader and the files together.
Then start your Nexus into bootloader mode, connect it to your PC, open a console (cmd for Windows, Terminal for Linux and Mac OS X) and type this:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
WARNING: Your Nexus is FULLY EMPTY!!! Don't reboot it because it can get a full brick (It will not turn on any more).
Now type this:
fastboot flash bootloader bootloader-grouper-X.XX.img
NOTE: Replace X.XX with your version.
Now type:
fastboot reboot-bootloader
Your Nexus will reboot.
Type this:
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img #Will take a very long time. DON'T INTERRUPT THE PROCESS!!!!!
fastboot flash userdata userdata.img
Now reboot again with:
fastboot reboot-bootloader
Re-unlock bootloader to get a full wipe:
fastboot oem lock
Reboot again:
fastboot reboot-bootloader
And then unlock the bootloader:
fastboot oem unlock
Press "Yes" to the petition screen and reboot:
fastboot reboot
Ready the Nexus!
I had the same problem and I did this.
I hope I can help you.
Sorry for my bad English. I'm from Argentina and I'm learning.
Well,
Good luck!

MlucianoEze said:
Boot failed??? That's a bad flash of the stock ROM. I had the same problem at my first attempt trying to flash Stock ROM, but don't worry! Let's do this:
WARNING: Before you continue you are accepting that I'm not responsible of anything can happen to your Nexus and your battery is fully charged.
When you download the stock ROM you have to uncompress the zip file. You will find the bootloader and another zip.
Uncompress that zip file, put fastboot program, the bootloader and the files together.
Then start your Nexus into bootloader mode, connect it to your PC, open a console (cmd for Windows, Terminal for Linux and Mac OS X) and type this:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
WARNING: Your Nexus is FULLY EMPTY!!! Don't reboot it because it can get a full brick (It will not turn on any more).
Now type this:
fastboot flash bootloader bootloader-grouper-X.XX.img
NOTE: Replace X.XX with your version.
Now type:
fastboot reboot-bootloader
Your Nexus will reboot.
Type this:
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash system system.img #Will take a very long time. DON'T INTERRUPT THE PROCESS!!!!!
fastboot flash userdata userdata.img
Now reboot again with:
fastboot reboot-bootloader
Re-unlock bootloader to get a full wipe:
fastboot oem lock
Reboot again:
fastboot reboot-bootloader
And then unlock the bootloader:
fastboot oem unlock
Press "Yes" to the petition screen and reboot:
fastboot reboot
Ready the Nexus!
I had the same problem and I did this.
I hope I can help you.
Sorry for my bad English. I'm from Argentina and I'm learning.
Well,
Good luck!
Click to expand...
Click to collapse
what do i type into cmd inorder to be able to type
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
and get it to work. im a noob . thanks in advance

You have to be in the folder with fastboot inside else those commands will not work.
It will be easier if you put the images extracted from the zip into the zip together with the fastboot program.
If you don't understand yet I'll try to be more specific.
Sent from my Nexus 7 using xda app-developers app

dieselmonkeyy said:
what do i type into cmd inorder to be able to type
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
and get it to work. im a noob . thanks in advance
Click to expand...
Click to collapse
It can be intimidating... and the so-called tool-kits don't help you learn
I assume you are using Windows.
follow the unzip instructions from the previous poster. (not quoted here). note the directory.
find the directory containing your android tools... ADB.exe and FASTBOOT.exe.
transfer your unzipped files to this directory. Open your CMD prompt window and change to this directory if necessary.
plug in your Nexus.
type fastboot device at the prompt. MAKE SURE YOUR NEXUS 7 is listed (serial number)
proceed with the complete instructions from the previous poster.
that should do it.

YES!!!
thanks alot for the instructions, it worked!!! i hope people use ur instructions as reference if they have the same problem. THANKS ALOT!!!

dieselmonkeyy said:
thanks alot for the instructions, it worked!!! i hope people use ur instructions as reference if they have the same problem. THANKS ALOT!!!
Click to expand...
Click to collapse
I'm glad the problem is solved. Do not forget to click the THANKS button.
Sent from my Nexus 7 using xda app-developers app

Hello. My brother's Nex 7 is also has this issue. I cannot follow any of the steps as it gets stuck on erasing any of the partitions. I tried erasing those partitions in any order and they still get stuck. His device was stock and bootloader locked too. When I try to unlock the bootloader, it gets stuck as well at the erasing userdata part. I suspect a bad memory chip. Anyone else experience this?

Yes, mine is sticking on the (bootloader) erasing userdata on bootloader unlock as well.
It also sticks on any fastboot ERASE command.
Factory reset had a bunch of errors and no longer comes up. none of the FLASH commands work because the BOOTLOADER is locked.
And since it freezes on the unlocking bootloader commands I believe I am screwed.
This was a factory installed, never flashed, unlocked or rooted Nexus 7 wifi 2nd gen. After installing the 4.4.2 that popped up it loaded once then crashed and never loaded again
I have tried every tool I can find. They all stick on the erase part.

jophisdrazin said:
Yes, mine is sticking on the (bootloader) erasing userdata on bootloader unlock as well.
It also sticks on any fastboot ERASE command.
Factory reset had a bunch of errors and no longer comes up. none of the FLASH commands work because the BOOTLOADER is locked.
And since it freezes on the unlocking bootloader commands I believe I am screwed.
This was a factory installed, never flashed, unlocked or rooted Nexus 7 wifi 2nd gen. After installing the 4.4.2 that popped up it loaded once then crashed and never loaded again
I have tried every tool I can find. They all stick on the erase part.
Click to expand...
Click to collapse
Send your device for repair. My brother did so. My suspicions were correct. A faulty chip. They replaced the whole board, according to my brother.
Sent from my Nexus 7 using Tapatalk

[Tutorial] Restore Nexus 9 to Stock

I have a defective device and in preparing to return it, I locked the bootloader and found a nasty little message at the top of the screen when booting:
Code:
This is a development device not intended for production use.
I was afraid that the N9 was like the N5 & 7 with the "tamper" flag, but after some digging (and advice from others out here), I decided to restore the factory image to see if that would overwrite the image. Yes! No more big fat red "I unlocked my bootloader and may have voided my warranty" message.
I can't take credit for this, but I thought I would consolidate everything I was finding in the Q&A threads into one spot, so I put this little tutorial together. Thank you @Pilz, @jd1639 & @PhilDX for your various posts.
Step 1 - Prepare your system
[Windows]
Since your bootloader is unlocked, you probably already have ADB and fastboot, but if not, grab the SDK from here, unzip and add the "platform-tools" directory to your PATH statement
If your drivers are set up properly and your device has Android debugging enabled, connect USB and execute `adb devices` from a command prompt you should see your device listed
Download the factory image for "volantis" here
The image is double zipped, so unzip, untar, then unzip the image-volantis-lrx21q.zip file into the same directory that contains the bootloader*.img file
Step 2 - Unlock bootloader
If you locked your bootloader, unlock again:
Code:
adb reboot bootloader
fastboot oem unlock
Step 3 - Flash stock image
The flash-all.bat script is broken, so you have to do it by hand:
Open a command prompt
cd into the directory where you unzipped the factory image files
Code:
fastboot flash bootloader bootloader-flounder-3.43.0.0114.img
fastboot reboot-bootloader
fastboot erase system
fastboot erase recovery
fastboot erase cache
fastboot erase boot
fastboot erase userdata
fastboot erase vendor
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash boot boot.img
fastboot flash vendor vendor.img
Before rebooting, relock the bootloader:
Code:
fastboot oem lock
Your N9 will reboot and do another factory reset (even though an oem lock is not supposed to).

Typo: fastboot oem unlock

hirndurst said:
Typo: fastboot oem unlock
Click to expand...
Click to collapse
Hahaha! Thanks.

always good to know! thanks!

Just a question, I'm still a beginner at adb fastboot flashing.
But doesn't the oem unlocking and subsequent oem lock, erase everything anyway, so are the erase commands still required?

AjunNg said:
Just a question, I'm still a beginner at adb fastboot flashing.
But doesn't the oem unlocking and subsequent oem lock, erase everything anyway, so are the erase commands still required?
Click to expand...
Click to collapse
The erase commands are required. I believe that a factory reset only clears userdata (and probably cache). You need to run the others to clear those partitions to make room for the factory images. Each of those commands run pretty quick anyway.

DarthSudo said:
The erase commands are required. I believe that a factory reset only clears userdata (and probably cache). You need to run the others to clear those partitions to make room for the factory images. Each of those commands run pretty quick anyway.
Click to expand...
Click to collapse
You could also use fastboot -w instead of the erases
Sent from my Nexus 9 using XDA Free mobile app

Thanks for this thread. Great guide.

jd1639 said:
You could also use fastboot -w instead of the erases
Click to expand...
Click to collapse
According to the fastboot "help", -w only formats userdata and cache, does it actually format the other partitions as well? This wouldn't be the first time the documentation is wrong...
Code:
-w erase userdata and cache (and format
if supported by partition type)

Thanks for this. I RMA'd my Nexus 9 and sending it back tomorrow

DarthSudo said:
According to the fastboot "help", -w only formats userdata and cache, does it actually format the other partitions as well? This wouldn't be the first time the documentation is wrong...
Code:
-w erase userdata and cache (and format
if supported by partition type)
Click to expand...
Click to collapse
It only formats userdata and cache. But you don't need to erase the other partitions
Sent from my Nexus 5 using XDA Free mobile app

AjunNg said:
Just a question, I'm still a beginner at adb fastboot flashing.
But doesn't the oem unlocking and subsequent oem lock, erase everything anyway, so are the erase commands still required?
Click to expand...
Click to collapse
jd1639 said:
You could also use fastboot -w instead of the erases
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
jd1639 said:
It only formats userdata and cache. But you don't need to erase the other partitions
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
You guys are all right. I looked back at some of my notes and I've flashed plenty of devices w/o formatting the other partitions first. Just userdata and cache. Thanks!

Hey guys, just wanted to thank you for the fixed "script". This is now my flash-stock.sh script I use whenever I need to flash a nexus device as the one delivered by google just doesn't work (reboot loop due to crashing apps on startup or "missing system.img").
Works perfect and I always like to not dirty but rather make a clean flash as it just reduces the number of possible faults .
Cheers
Creamy

Just got my N9. First thing I did was to apply all updates, then unlock bootloader, boot into TWRP and make a system image. Then I flashed TWRP and rooted. Now if I want to take an OTA update, all I have to do restore the system image and flash the stock recovery, right? Am I missing anything? Thx.
Sent from my Nexus 6 using Tapatalk

bruce7373 said:
Just got my N9. First thing I did was to apply all updates, then unlock bootloader, boot into TWRP and make a system image. Then I flashed TWRP and rooted. Now if I want to take an OTA update, all I have to do restore the system image and flash the stock recovery, right? Am I missing anything? Thx.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
The OTA will run a check and will fail if the image isn't basically stock. For you, just do a full unroot in the SuperSU app (under Settings), then you need to replace TWRP with the stock recovery from fastboot:
Code:
fastboot flash recovery recovery.img
Reboot then take the OTA.
Of course, you will need to install TWRP and re-root again after the OTA...

DarthSudo said:
The OTA will run a check and will fail if the image isn't basically stock. For you, just do a full unroot in the SuperSU app (under Settings), then you need to replace TWRP with the stock recovery from fastboot:
Code:
fastboot flash recovery recovery.img
Reboot then take the OTA.
Of course, you will need to install TWRP and re-root again after the OTA...
Click to expand...
Click to collapse
Thx, that seems simple enough. But I made the initial system (stock) backup before I rooted. That's why I was thinking restoring that would work. I just wasn't sure about the recovery, whether the restore would put the stock recovery back or not.
Sent from my Nexus 6 using Tapatalk

DarthSudo said:
I have a defective device and in preparing to return it, I locked to bootloader and found a nasty little message at the top of the screen when booting:
Code:
This is a development device not intended for production use.
Your N9 will reboot and do another factory reset (even though an oem lock is not supposed to).
Click to expand...
Click to collapse
Hi,
is there a way to get rid of that red message if your bootloader is locked and you cannot boot into OS?
Thanks!

EDIT* Nevermind

Hey. Sorry for reviving this thread.
I installed Remix OS on my N9 and (after discovering that performance is horrible, with ~80% RAM usage on idle) after a reboot, Remix OS won't get past it's boot splash. I am attempting to flash my device back to stock.
I never touched the bootloader (never did any 'fastboot flash bootloader ...' or anything), so it it still necessary to flash the bootloader image, or can I just flash the system.img, boot.img, vendor.img etc.?

The bootloader had never changed so there is no reason to flash it.
Sent from my Nexus 9 using XDA Free mobile app

Fastboot flash says it works but doesnt

Ok, so this is an odd issue. I've had my N7 Grouper unlocked and have been running custom roms for a long time now, and about 6 months back I tossed on the All-F2FS version of Slimkat. Everything was running fine and has been since then, up until the last few days. Now the device just reboots randomly after it gets into the system. It runs fine in bootloader or recovery so I know it's not a loose battery connector as I've read about. I'm at a loss as to why and I gave up trying to find out.
I've since been trying to simply wipe my tablet and reset back to a clean install of the All-F2FS Slimkat as I've had or even tried a stock restore now. Nothing I do works at all. I've tried everthing from the modified All-F2FS TWRP 2.7.0.0 that I installed as a part of the move to F2F2 but although it reports that it's wiped everything fine, or flashed a new rom fine, it does nothing in truth. After a quick reboot its as if nothing happened at all. I've then tried to run things from adb/fastboot and I'm even after running all the commands in fastboot which all say they run fine (flashing, reformatting partitions, etc.) nothing at all actually happens to the N7.
Anyone else seen this or have any ideas?

Hello,
please try this command's:
Code:
fastboot erase cache
fastboot erase system
fastboot erase userdata
fastboot erase recovery
fastboot erase boot
Then flash a FactoryImage! At least root and flash again.

Trafalgar Square said:
Hello,
please try this command's:
Code:
fastboot erase cache
fastboot erase system
fastboot erase userdata
fastboot erase recovery
fastboot erase boot
Then flash a FactoryImage! At least root and flash again.
Click to expand...
Click to collapse
I've tried all of those commands multiple times. I'm an old hat at rooting, unlocking, and running custom roms on Android so I've been doing literally everything I can think of. Every command shows that it completes successfully but nothing actually happens. I've tried fastboot erase commands, fastboot format commands, fastboot flash commands, and many many more. I've run six different versions of the factory image, everything from 4.0.0 to 5.1.1. The only errors I've ever seen while working with the tablet is while attempting to erase/format partitions within the recovery there are some errors about not being able to access the cache. I'll update this with the specific errors.

Anyone? I'm at a loss here. I've run everything I can think of and the commands always complete successfully, then don't actually work at all.

Can't flash partitions

Hello all,
I left a similar post in a couple other threads, and thought maybe someone here might have some insight into my problem.
Been running AICP rom (no custom kernel except the one that comes with AICP) with f2fs on /data and /cache for several months on 16GB grouper. About a month or so ago, the wife installed a game that wouldn't run on this hardware (King's Paradise Bay), and I uninstalled it. It left a file in /data/data/....etc that couldn't stat in TWRP, so no nandroid backups since then. I figured I'd just backup user data with TiBkp and wipe with fresh install of latest AICP when time permitted.
The other night I noticed the N7 was boot looping, getting to the stage where the boot animation dims. The boot anim would hang and after several seconds the Google unlock splash screen would come up and the N7 would try to boot again.
I can get into TWRP and bootloader with no problem. However, when TWRP comes up, the log shows the red entries for 2 files that can't stat, which has been this way since that game was uninstalled. I cannot seem to wipe *any* partition, and when I attempt to format or wipe userdata in TWRP, the N7 spontaneously reboots. Manually attempting to wipe/format/etc. via FastBoot doesn't work, with error message showing after trying to flash bootloader. Also, I can't change /data or /cache back to ext4. I am able to successfully read, write, and delete files on the N7 via computer USB MTP connection.
If the N7's flash memory has somehow become corrupted, is there a way to completely erase/format/whatever so that this wonderful device can become usable again? Any help would be greatly appreciated.
Thanks in advance.

Hello,
don't flash Bootloader via Fastboot. You should do this commands:
Code:
fastboot erase cache
fastboot erase userdata
fastboot erase system
fastboot erase boot

Trafalgar Square said:
Hello,
don't flash Bootloader via Fastboot. You should do this commands:
Code:
fastboot erase cache
fastboot erase userdata
fastboot erase system
fastboot erase boot
Click to expand...
Click to collapse
Yes, I have attempted all these commands, followed by flashing with either fastboot or TWRP with no success. Fastboot reports success, but partitions are not erased.

I have the same problem. The Nexus Root Toolkit can not flashign. It succeeds only boot TWRP. In TWRP computer sees the files from the tablet.I could not rename and delete. Wipe the TWRP and stock recovery displays the status OK, and the files are deleted. Fastboot shows that uploads, but all files remain unchanged.