Hello to all.
After a failed update (i was trying to update to U8800Pro V100R001C00B572G001 Universal) device is not responding at all. I found that thread http://forum.xda-developers.com/showthread.php?t=1431730 but doenst work eather. Now i have access only at pink screen (pc recognises the devise as a removable disk with 255mb) i see the image folder inside there (amss.mbn, boot.img, cust.img, EMMCBOOT.MBN, recovery.img) and not responding. Please help... Is there any way to have my phone back again or it's totaly out of order?
Thread moved to Q&A section. Please read this. Regards.
I had the same problem and i solved like this:
1.Format your SD card Fat32.
2.Create a folder on SD and name it dload.
3.Copy the file UPDATE.APP from Step2 in dload folder and rename it as UPDATE_g.APP
4.Copy the file UPDATE.APP from the STEP1 folder in the dload folder too.
5. Remove the battery.
6. Re-install the battery and turn on the device keeping the Vol+ button and Power button simultaneously.
The device will enter Recovery mode.
7.Choose reboot now and press power button to confirm.
8.Hold immediately pressed Vol+ and Vol- buttons until update begins.
9.After reboot delete UPDATE.APP and UPDATE_g.APP from dload folder and any other file and copy UPDATE.APP from Step3.
9.Repeat from step 5.
After reboot you will have official GB on your phone.
Good Luck!!!
giorgoslouk said:
I had the same problem and i solved like this:
1.Format your SD card Fat32.
2.Create a folder on SD and name it dload.
3.Copy the file UPDATE.APP from Step2 in dload folder and rename it as UPDATE_g.APP
4.Copy the file UPDATE.APP from the STEP1 folder in the dload folder too.
5. Remove the battery.
6. Re-install the battery and turn on the device keeping the Vol+ button and Power button simultaneously.
The device will enter Recovery mode.
7.Choose reboot now and press power button to confirm.
8.Hold immediately pressed Vol+ and Vol- buttons until update begins.
9.After reboot delete UPDATE.APP and UPDATE_g.APP from dload folder and any other file and copy UPDATE.APP from Step3.
9.Repeat from step 5.
After reboot you will have official GB on your phone.
Good Luck!!!
Click to expand...
Click to collapse
nothing happend
is there any way to flash the stock rom? and how.
S O L V E D ! ! ! Was my mistake @ step "3.Copy the file UPDATE.APP from Step2 in dload folder and rename it as UPDATE_g.APP" (named that as UPDATE_g.APP.APP). Thank you so much.
Γιώργο σε ευχαριστώ πολύ!!! Να σε πάντα καλά φίλε μου. Όλα τα καλά του κόσμου να έχεις σ'αυτές τις ημέρες που ζούμε. Ευχαριστώ μέσα απο την καρδιά μου.
Ελπίζω τώρα που θα δοκιμάσω να αναβαθμίσω στην εκδοση 4 να πάνε όλα καλά.
Related
Hi, i would like to know how can i install the official upgrwde, after download it from huawei website?
Step by step please... it's my 1st android...
Cheers
There should be a step by step guide at the Huawei web site. So double check there first.
If you have a "dload" file from Huawei, then all you should need to do is put it on your sdcard and reboot your device. When your S7 turns on you should see a progress bar. When the update is complete remove your battery..... do not push the power button, it will cause the device to redo the update. Remove your sdcard from the S7 and remove the "dload" file from it (via card reader or hub connected to your PC). Once the dload file is no longer on your sdcard you can put it back to use in the S7.
Upon rebooting, you should see the update has taken hold. To verify, look in " About Device" in your settings menu.
andrepepe said:
Hi, i would like to know how can i install the official upgrwde, after download it from huawei website?
Step by step please... it's my 1st android...
Cheers
Click to expand...
Click to collapse
Make sure you don't have a dload folder inside a dload folder if you have got a zipped file.
Dload in the root directory of sdcard and the update files in the dload folder!
Hi! I have just downloaded the latest update for my U8800 PRO (V100R001C00B512G001(Overseas Nomal)(Gingerbread), I have three folders: Step1, Step2 and Step3.
What should I do now? I have created a folder called "dload" (root of SDCard) and put in it UPDATE.APP from step1 and UPDATE.APP from step2 renamed to UPDATE_g.APP.
I have ignored the Step3 folder. Is this the correct way to update my U8800 PRO?
And what bugs are there in this release? Thank you!
As well i tried everything with the keys help me guys
And tried to start it with volume + volume - amd power key its says *software install failed the package does not exist* help me please guys huawei MYA l22
[IMG="picture of error"]
https://ibb.co/dczTyG[/IMG]
Danimyal22 said:
As well i tried everything with the keys help me guys
And tried to start it with volume + volume - amd power key its says *software install failed the package does not exist* help me please guys huawei MYA l22
[IMG="picture of error"]
https://ibb.co/dczTyG[/IMG]
Click to expand...
Click to collapse
The update.zip file must be extracted to the folder "dload" in root directory of SD card.
Create a new folder “dload” in its root directory (It means dont put it in any folder .)
Extract the ZIP file and copy its contents “UPDATE.APP” to the “dload” folder (do not put in folder).
Hope it helps.
Found Phone : PRA-LX1
Model : Huawei phone in fastboot mode
Firmware : PRA-LX1C432B164
FRP: LOCKED
Phone: RELOCKED
nikola25000 said:
Found Phone : PRA-LX1
Model : Huawei phone in fastboot mode
Firmware : PRA-LX1C432B164
FRP: LOCKED
Phone: RELOCKED
Click to expand...
Click to collapse
You can try this test:
- download the firmware on the pc PRA-LX1C432B164
- use the program Huawei Update Extractor in PRA-LX1C432B164 , extract UPDATE.APP
- in the empty SD card create a folder dload and in the folder copy UPDATE.APP
- reboot with key combination vol+ vol- power for 5-8 second time
Notonlyeyes said:
You can try this test:
- download the firmware on the pc PRA-LX1C432B164
- use the program Huawei Update Extractor in PRA-LX1C432B164 , extract UPDATE.APP
- in the empty SD card create a folder dload and in the folder copy UPDATE.APP
- reboot with key combination vol+ vol- power for 5-8 second time
Click to expand...
Click to collapse
I am downloaded the full version PRA-LX1C432B164
I created in the empty sd card folder dload and copied to the folder UPDATE.APP.
I started the phone as you wrote in the explanation and I got it wrong
nikola25000 said:
I am downloaded the full version PRA-LX1C432B164
I created in the empty sd card folder dload and copied to the folder UPDATE.APP.
I started the phone as you wrote in the explanation and I got it wrong
Click to expand...
Click to collapse
Notonlyeyes said:
Click to expand...
Click to collapse
friend video does not work
nikola25000 said:
friend video does not work
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=aU-CA58p3rw&feature=youtu.be
Notonlyeyes said:
https://www.youtube.com/watch?v=aU-CA58p3rw&feature=youtu.be
Click to expand...
Click to collapse
I can not get into my phone because my friend is because I am Phone: RELOCKED FRP: LOCKED
Can someone help me downgrade my Huawei to it's stock version? I'm doing it to unlock the bootloader and flash roms safely or at least in a safe way....
Do you have sd card? If you have download Firmware which suitable for your phone in https://androidhost.ru . Search FIG-LX1 and find your oldest firmware with region code.
- Format your sd card to Ex-fat create a folder and name it "dload"
- In rar archive Software/dload/update_sd.zip file unrar somewhere and is there UPDATE.APP file in update_sd.zip.
- Put UPDATE.APP to your dload folder.
- Shutdown your phone . Press VolUp+VolDown+Power button
installation start automatically and at the end your phone downgraded perfectly . You can use dc-unlocker and it will read your bootloader unlock code
santalimi said:
Do you have sd card? If you have download Firmware which suitable for your phone in https://androidhost.ru . Search FIG-LX1 and find your oldest firmware with region code.
- Format your sd card to Ex-fat create a folder and name it "dload"
- In rar archive Software/dload/update_sd.zip file unrar somewhere and is there UPDATE.APP file in update_sd.zip.
- Put UPDATE.APP to your dload folder.
- Shutdown your phone . Press VolUp+VolDown+Power button
installation start automatically and at the end your phone downgraded perfectly . You can use dc-unlocker and it will read your bootloader unlock code
Click to expand...
Click to collapse
Huge thanks mate!
This is why I love XDA
santalimi said:
Do you have sd card? If you have download Firmware which suitable for your phone in https://androidhost.ru . Search FIG-LX1 and find your oldest firmware with region code.
- Format your sd card to Ex-fat create a folder and name it "dload"
- In rar archive Software/dload/update_sd.zip file unrar somewhere and is there UPDATE.APP file in update_sd.zip.
- Put UPDATE.APP to your dload folder.
- Shutdown your phone . Press VolUp+VolDown+Power button
installation start automatically and at the end your phone downgraded perfectly . You can use dc-unlocker and it will read your bootloader unlock code
Click to expand...
Click to collapse
BTW will it wipe my Internal Storage??
actually i dont remember
santalimi said:
actually i dont remember
Click to expand...
Click to collapse
Thanks anyway!
Maybe tomorrow or something I'll try it
Info
@santalimi can I follow the procedure without having the bootloader unlocked?
Can somebody give a link where I will be able to download stock boot.img?
here is safe downgrade method, Huawei P Smart FIG-LX1 9.1.0.130(C02E8R1P5 Downgrade Problem [SOLVED]
...:::::NP™:::::... said:
here is safe downgrade method, Huawei P Smart FIG-LX1 9.1.0.130(C02E8R1P5 Downgrade Problem [SOLVED]
Click to expand...
Click to collapse
Hello. Is that too available for free (ressurrector tool)? Is it free? Is it possible to use it to flash a custom recovery on a locked phone? Thanks
santalimi said:
Do you have sd card? If you have download Firmware which suitable for your phone in https://androidhost.ru . Search FIG-LX1 and find your oldest firmware with region code.
- Format your sd card to Ex-fat create a folder and name it "dload"
- In rar archive Software/dload/update_sd.zip file unrar somewhere and is there UPDATE.APP file in update_sd.zip.
- Put UPDATE.APP to your dload folder.
- Shutdown your phone . Press VolUp+VolDown+Power button
installation start automatically and at the end your phone downgraded perfectly . You can use dc-unlocker and it will read your bootloader unlock code
Click to expand...
Click to collapse
Didint work for me, tried few SD cards, gazilion different firmwares and 2 bricked phones to revive. Always getting "Update failed" error.
I've succesfully unbricked my phones this way:
1)Download your firmware (region code must match! mine was C432)
2)Unpack your firmware, you'll get new folder with your firmware inside (eg. Huawei P Smart FIG-LX1 Fig-L31 hw eu HLRCF Figo-L31 9.1.0.115(C432E5R1P3T8) Firmware 9.0.0 r3 EMUI9.0.1 05014XMW [androidhost.ru])
3)Format Your SD card (i've used NTFS file system)
4)Open your firmware directory, go to \Software and there you'll find a "dload" folder
5)Copy dload folder to your SD card
6)insert card to your phone, push vol+ vol- and pwrbtn for 10 seconds, relase buttons when huawei logo appears.
Your update will process automatically, it will take a few minutes.
Voila!
Hi, I know that this is an old thread. But I tried t34v2's method, and it kind of worked, it updated the recovery(it looks completely different) but it still will not boot. Is there anything else I could try ?
Thank you for any help.