Database Users

[Q] getting the NC in 24 hours... what rom to use?

tommorow morning i'll get my NOOK COLOR refub about 3 weeks since i ordered it...
the main issue right now is what Rom to use
stock CM7? CM based rom? HC?
would apriciate any advice

iakovl said:
tommorow morning i'll get my NOOK COLOR refub about 3 weeks since i ordered it...
the main issue right now is what Rom to use
stock CM7? CM based rom? HC?
would apriciate any advice
Click to expand...
Click to collapse
1. There is no stock CM7.
2. CM based ROMs are good. CM7 is strongly recommended. Others reported loving MIUI which I've never tried.
3. Forget about HC.

OK so no HC
CM7 options:
1-MiRaGe
2-Phiremod 7.1
3-CyanogenMod 7
also
as far as i could tell the normal OC it to 1.1~1.3Ghz any special things i need to know?

Use plain old CM7 it is by far the best and you don't have to wait for the themer to update his/her rom.
Sent from space

My suggestions:
If you want an e-reader focused experience and plan to buy subscriptions and content from B&N, root their 1.4.1 ROM. You get a nice reader with the ability to jump over the Walled Garden walls.
If you want an Android tablet that can be used for reading books, go with Cyanogenmod 7.1. I run the nightlies myself, and have few issues.
Just be aware that the Android Nook app is nowhere near the same thing as the B&N reader. If you want that "B&N Experience", the B&N ROM is the way to go. If you don't care about B&N stuff, there's no advantage to their ROM, other than maybe the free-form launcher.
I just wish the Android launchers weren't all so grid focused. They make my tablet look like an oversized phone.

Ignore this post.

so... CM7 nightly build, use stock kernel? or is there something better?

Just use the stock kernel. I boot CM7 stable (7.1.0 currently) from SDcard using Verygreen's 1.3. I can't recall the last time I ran the stock firmware. Only reason I can see to use stock is if you subscribe to any magazines, or use their children's books. That is the beauty of running off SCcard, you can always switch back to the stock if you want to.
Homer

iakovl said:
so... CM7 nightly build, use stock kernel? or is there something better?
Click to expand...
Click to collapse
Dals overclock kernel is already included in the 7.1 stable. So there isn't any other kernels you can use anyway.
Sent from space

I'd put in a vote for MiRaGe.
Nightlies haven't been nightlies for a while due to build problems and CM9 preparations. This means that latest nightly doesn't benefit from latest fixes including those for SOD which also can affect the stable build.
MiRaGe has those fixes in plus a modular kernel which frees up more memory does seem to speed things up. It is a bit smaller as it has some stuff stripped out.
I'm happy with that build. It seems very stable and fast. I'll probably stay with these till CM9 matures a bit more.

moving to mirage from cm7
did anyone use V6 SuperCharger 9 rc4 with it?

Definitely MiRaGe.
No question about it.
I did CM7 for a couple of weeks and then MiRaGe for the past couple of weeks. No comparison. MiRaGe is much faster, much more stable, better battery life. Without a doubt, it's the winner of the two.
Haven't tried Phiremod. I have no reason to try something else.

bobtidey said:
I'd put in a vote for MiRaGe.
Nightlies haven't been nightlies for a while due to build problems and CM9 preparations. This means that latest nightly doesn't benefit from latest fixes including those for SOD which also can affect the stable build.
MiRaGe has those fixes in plus a modular kernel which frees up more memory does seem to speed things up. It is a bit smaller as it has some stuff stripped out.
I'm happy with that build. It seems very stable and fast. I'll probably stay with these till CM9 matures a bit more.
Click to expand...
Click to collapse
+1 MiRaGe. If you'd drop by MiRaGe Thread's OP and review the changelog, you'll see there have been lots of improvements to the build including a modular kernel that is based off dalingrin's which is the base for overclocking and has the SOD patch as well. Aside from this, the signal icon/wifi bug on the latest nightly (253) is fixed as well. There's also an optional script called v6 supercharger that adds up to the total speed and ultimately reduces lags on your NC. Performance has been superb and I've been using it for almost a month. mrg666 also syncs to CM Repo if he finds anything new to add he updates it (like nightlies) and it's definitely worth it.
Tapatalkin' it from my rooted NookColor running CM7 MiRaGe [KANG] [7.2 RC] overclocked @ 1.2 GHz

Yup. Right now Mirage is the way to go. Combine it with the V6 Supercharger and you get a steady nice and mostly lagfree experience with quite everything you throw at it.

what settings to use with V6 RC9?

[Q] cm9 ready?

I have been on cm7 and its been rock soild. Im wondering if the newest cm9 nightlys r ready for daily use? Thanks.

Short answer: No.
Long answer: NNNNNNNNNNNNNNNNNNNOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
Honestly "daily use" is a matter of preference. Why not search around the forums to see other peoples experiences, bugs, and even backup your current setup and flash it yourself to try.

If you accept anything less than "rock solid" then yes, go ahead and have fun with CM9.
It's good to play with but up to this point, no reason to replace Cm7

I use cm9 for daily use, but there are issues. I use my nook as my mail computer for a few of my classes, but many games have issues that make them a bear to use. Some apps load as if on a phone while others load as if on a tablet. Battery life isn't as good and some parts aren't particularly stable. CM9 has perfect keyboard mapping for my bluetooth keyboard and all of my apps i use for school work fine, so I'm happy with it. Basically, it's ready for stable use if you're not using it for too much entertainment in my opinion.

Why not dual-boot both for best of all possible worlds? I've been using Racks triple boot off SD card for weeks now with good results from both CM7 and interesting fiddlings with CM9. And always with the stock B&N on emcc to fall back on.

Anniraff said:
Why not dual-boot both for best of all possible worlds? I've been using Racks triple boot off SD card for weeks now with good results from both CM7 and interesting fiddlings with CM9. And always with the stock B&N on emcc to fall back on.
Click to expand...
Click to collapse
How much space does the CM7 and CM9 partitions take on the SD? I need all the space I can get on my 16gb SD...
MY CM7 is really sluggish running from the emmc at the moment so I'm not sure if I should swith ROM or just reinstall everything.

Taken from Easeus:
part. size used
boot: 117.63 12.59
1 305.93 305.93
2 604.01 604.01
3 384.34 384.34
4 603.98 603.98
SD card 5.43GB 5.43GB
This is partitioned 8GB Sandisk card. I've never used anything larger, but YMMV.
I'm too new with CM9 to be clear on which partitions hold which ROM systems, but I think you will see, regardless of what goes where, you've stll got a lot of space to use.
And, both my CM7 and CM9 are whip-fast (I'm using V6 Supercharger, which helped my Kang build CM7 a lot). Oddly, my slowest speed seems to be the stock B&N, but I use it rarely.

optimusv45 said:
Im wondering if the newest cm9 nightlys r ready for daily use?
Click to expand...
Click to collapse
You might not be aware of this, but your real question is "am I ready to deal with pre-release-quality software?" Of course CM9 is ready for daily use; but are you ready for CM9 in its current state? This is something that you'd have to ask yourself.

i dont have an sd card for dual boot images
Anniraff said:
Why not dual-boot both for best of all possible worlds? I've been using Racks triple boot off SD card for weeks now with good results from both CM7 and interesting fiddlings with CM9. And always with the stock B&N on emcc to fall back on.
Click to expand...
Click to collapse

i have just tried cm9 today. I'm happy with the progress however I'm going back to cm7 lol it is not ready ~, at least not ready for me . Youtube doesn't work for me . scrolling is slower than cm7. it looks really neat though .

GB CM7 vs. ICS CM9 on Triple-boot SD

As a newbie, I can't raise this question in Development box, so I guess I'll post it here.
My NC just arrived 2 days ago and I have installed the Dualboot CM7 & CM9 by racks11479. I am an absolute newbie on Android, so I just want to know which one is better in terms of battery life and stability/compatibility.
Many thanks.

right now cm7 is because its stable, but cm9is stable for everyday use but there are some bugs, i like them both but when cm9 is complete it will be alot better then cm7, both are good on battery i cant tell the difference

It seems to me that CM9 still has some bugs (Youtube, Earth and some games don't work on my NC). And the response is a bit slower than CM7. Anybody got the same experience?

I am using samiam's CM9 nightly with v6supercharger and am very happy so far. It is stable and very usable for daily use, in my opinion. But maybe I like to live dangerously.
Sent from my CM9 NookColor using Tapatalk

I also cannot post in the Development forum. I have created the dual boot SD from racks11479. CM7 works great but in CM9 I cannot get the Gapps to work. When I click on Market nothing happens. The Gmail icon is there but when I click on it I get a message that the app is not installed.
I have re-installed the Gapps at least twice and get the same problem each time.
Any ideas?

Yup same thing
Sent from my HTC_A510c using XDA App

I had the same problem when I first installed the racks triple-boot. Hate to tell you, but the only way I got it to work was to wipe the whole card and start from scratch. 2nd install worked great, and later updates worked with a simple Gapps re-flash.

vinhattieu said:
I am an absolute newbie on Android, so I just want to know which one is better in terms of battery life and stability/compatibility.
Click to expand...
Click to collapse
Like others, I'm finding CM9 preferable as a daily driver, but for all three items you specifically listed, CM7 has it beat. Well, I'm not getting force closes or anything, so I'll give CM9 stability, but no hardware video acceleration means certain apps are not going to work, and others won't work well (scratch compatibility), and I'm finding the battery drains much faster than CM7.

[Q] ?'s re CM9; What works, what doesn't, battery life, etc.

I have a used Nook Color on the way. I've been looking forward to rooting my very own NC for months now, and as soon as mine gets here, I'm going to work. But I am looking for some advice first. Before anyone tells me to search and read the threads, I have been, for the last week. That's why I have the questions!
I have CM7 on my Inspire, and have been very happy with it. My inner geek is screaming for ICS, and I'd really like to use CM9 on my NC. But I've been reading threads and while I see plenty of success stories, I hear lots of difficulties as well. "Man, this would be my daily driver except for (or in spite of) problem X." Some folks have sound issues, some don't. Bluetooth works, or it doesn't. Battery life is as good as CM7, or "I need a really long extension cord" (okay that's a paraphrase). Gapps work, gapps don't work. Screen rotation is funky for some, just fine for others. Then I read where this issue or that one has been fixed, but not for everyone. And there doesn't seem to be any rhyme or reason as to why some have problem X and others don't. My head's spinning a bit here.
So here's what I'm hoping for from CM9 on my Nook Color. I need wifi obviously. I will be wanting to use it to listen to music and occasionally watch movies from Amazon or Netflicks, so I need sound. I'd like to get decent battery life (and what exactly IS decent battery life for these things anyway?) And Bluetooth isn't a deal-breaker, but I'd like to be able to use a BT keyboard occasionally. Am I expecting too much? I know we're still in the nightlies era with CM9.
Is there a stable, functional CM9 build out there? Should I expect to have to resolve some of these issues? I don't mind a bit of tinkering, but how much should I expect? Or should I bite the bullet and go with CM7?
If it helps, my plan is to re-partition 1.96 /data as discussed in DeanGibson's thread http://forum.xda-developers.com/showthread.php?t=1094371 and install CMx to eMMC according to eyeball's thread http://forum.xda-developers.com/showthread.php?t=1030227 . I am planning on using this as a daily driver.
What should I realistically expect?
I know some of the regulars here must get tired of these sorts of questions, but after reading threads I'm more confused than ever. Any help would be GREATLY appreciated.

Surprising no one has answered this. I'll answer what I can, though I've only just recently built a working version of CM9 myself. This thread will give you a good overview of stuff, and give you a mostly-working instruction document to compile your own copy of ICS CM9. Both this thread and [url="http://forum.xda-developers.com/showthread.php?t=1526115"this thread[/url] give out unofficial nighties for CM9.
First, you asked if there's a stable, functional build of CM9. There is not. The ones you'll find are functional, but buggy. Some things outright do not work, some are buggy or glitchy, and some things just won't work.
I don't think there's too much tinkering that will be necessary, at least I haven't had any tonight. There will be issues you run into, or things you wish worked that don't. Everything is still very alpha right now. But still very usable.
As for movies/videos, I'm not very sure. I have not tried video on mine yet, and probably won't, as I don't use it for that.
I, for one, do plan on using it as a daily driver, as I've not found enough issues to not. Besides, I love playing with a new toy, and ICS is new enough to count 8D

CM9 is still at an early stage compared to CM7. In my experience with the latest nightly builds it is very stable, has good wifi, bluetooth (limited range like CM7), sound and video and a much nicer screen organisation and functionality compared to CM7. Against that it currently does not have video acceleration so Netflix will not work and the interface is noticeably laggy compared to CM7. The lag can be reduced somewhat by choosing alternative launchers and a bit of tweaking but it is not up to CM7 smoothness standards yet.
What I do with a new install is
a) Install MiRaGE CM7 7.2 to internal emmc memory. Install gapps. Set up and download the apps you want and set up the screens how you like. Back up your apps via Titanium.
b) Take a Nandroid back up of your install. This will be your CM7 fallback.
c) Wipe (system, data, cache) and install latest nightly CM9. Install ICS Gapps. Install Nova Launcher for a bit of extra smoothness. Do basic set up, restore downloaded apps via Titanium and set up screens how you like.
d) Take another Nandroid back up of your system.
Now see whether you can live with or prefer CM9. If you find it too laggy or need your Netflix then you can simply restore to CM7. You can choose to restore back to CM9 as well to apply a further update.
Others do a similar thing by keeping CM7 on their internal and booting to a CM9 on an SD card. Perfectly valid, but I prefer to stick to a clean emmc install and avoid switching SD cards around.

I have been on cm7 mirage kang for a couple of months now and played with cm9. Didn't really like it so went back to cm7. I had the 1gb system and 5gb media set up from the beginning and was looking into repartitioning. I went that route but am now on a dual boot configuration with cm7 mirage kang running primary and a nightly of cm9 running alternate. I have over 2gb for each system and a little over 1gb for media and my sd card that both cm7 and cm9 share. Give it a try. http://forum.xda-developers.com/showthread.php?t=1275859

Thanks for the advice guys. It's REALLY appreciated.
alunral, I had both of your nightlies threads bookmarked already, but hadn't gotten into the other one. Thank you, it's been informative. I hadn't really thought of compiling my own, but I may have to give it a shot. One of my boys and I have been playing with the idea of building our own Linux distro, but I'll bet I can get him interested in doing this first. He has a Xoom we could play around with too. (grinning and wiggling my eyebrows)
bobtidey and zires, those are both good suggestions. I'd thought about CM7 in eMMC and CM9 on SD, but I'm just not very enthusiastic about running off SD. Don't know why really.Either one of your ideas would work better I think.
UPS came by last night, and I'm looking at a new-condition NC sitting on the couch next to me. Y'all have made the road forward a little bit clearer.
zires, is your handle a left-over from the days of Palm?

[Q] Most stable and fastest ROM (at the end of Dec 2012) -- is...?

Dear everyone here,
I'm a newbie and bit of a n00b here.
My goal: I have Nook Color and want to put a stable ROM on it. It would be great if it can be stable, fast and Jelly Bean (CM10)!
I know the last official stable CM ROM is 7.2, Gingerbread. Didn't try it on Nook, yet.
I was following this thread http://forum.xda-developers.com/showthread.php?t=1941247 and tried CM10 nighty (ver. 11. Dec 2012). This was my first Nook Color ROM ever. Everything I've tried was ok, but it's very slow and I can't really use it. Are there any ROMs that are faster, with no leg?
So, please guys, who have tried different ROMs, please suggest me a good working (stable) and fast (no lag). CM10 would be great, if not please feel free to suggest (with a link provided).
Otherwise, I would try CM 7.2, which is a "phone" OS, not that suitable for tablets.
Thanks a lot!

you have to remember that the hardware you have only has a stock, single core 800mhz processor. you wont get any smoother than the latest nightly. i suggest that you do a clean flash of the latest nightly and then go to settings>performance>processor and set your cpu governor to performance and set the max frequency to 1100mhz
you have to remember that this is hardware from late 2010, two year old hardware, it performes well, but it cant compete with the nexus devices.

That Baker Guy said:
you have to remember that the hardware you have only has a stock, single core 800mhz processor. you wont get any smoother than the latest nightly. i suggest that you do a clean flash of the latest nightly and then go to settings>performance>processor and set your cpu governor to performance and set the max frequency to 1100mhz
you have to remember that this is hardware from late 2010, two year old hardware, it performes well, but it cant compete with the nexus devices.
Click to expand...
Click to collapse
Hello and thanks for your kind reply!
I've done what you suggested: CPU was already set to 1GHz in CM10, I've set it to 1100MHz and changed "on demand" to "performance". Not faster. Or not fast enough. I din't download another CM10 nightly since the one I'm using is just 3 days old.
I'm fully aware Nook Color is outdated in today's fast digital world. However, I'm disappointed it can't go any smoother since this is really to slow and even frustrating (waiting, click, waiting). What's the point of using CM10 if one can not really use it? CM10 nightly's general respond to basic operations (menus, settings) has a lag. Do the others report the same? What with the other CM10 ROMs, like Paranoid Android?
Would it be much better if I would switch to CM7.2 instead of CM10?
I also have ZTE Blade 2010. phone (600MHz stock single core CPU, OC to 800MHz) that works great on CM 7.2. Smooth and stable.
Once again, I didn't try CM7.2 for Nook Color, maybe it would work just as smooth as on Blade.
For the record, Blade and Nook Color almost have the same AnTuTu bench score (Nook is a bit better).
Please note I was using (testing) simple apps on Nook (not games or anything "heavy"):
- Opera Mini browser, News reading apps, ES File Explorer, etc -- works fine.
- Google Maps also works okay, no lag.
- YouTube is slow, it takes ages to swap from portrait to landscape when Nook is rotated. When finally starts playing it goes smooth even in HD.
- Chrome is a killer! Takes ages to load and is not usable.
All these apps, besides Chrome (requires Android 4) work just fine on my ancient ZTE Blade! :good:
I ask all of this since I saw posts on XDA regarding ICS and JB on NC saying "I'm totally thrilled with this version. Haven't had a bug at all, bluetooth functionality is flawless, and it's even faster than the stock software." I'd like the same!
Any hints now? Again, thanks a lot!

The fastest and smoothest ROM you'll find right now for your nook is going to be (mirage cm7.2).
Sent from my NookColor using xda premium

purpleurkle said:
The fastest and smoothest ROM you'll find right now for your nook is going to be (mirage cm7.2).
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
Especially if it is installed on the EMMC, and not running off of an SD Card.

My NC CM10 ROM is installed on EEMC, not SD. Should I forget about speed and smoothness on ANY CM9 and CM10 and go back to a phone OS on a tablet, CM7.2, as suggested?
Should I consider ICS instead JB hoping to get a better result? CM9 instead of CM10?
Sent from my NookColor using Tapatalk 2

I would forget about cm9, and cm10 is still in the works(but making progress). So if your looking for the most stable and smooth ROM, I would go with MiRaGe cm7.2, at least until cm10 has got a stable ROM. Those guys have tweeked that mirage ROM to the point of perfection.lol
Sent from my NookColor using xda premium

Thank you very much! I'll do that.
Sent from my NookColor using Tapatalk 2

Just try the various ones and see what suits your needs the best. Everyone has differing opinions of the various ROMs based on their particular hardware, setups, expectations, experience and the particular apps used.
Only you can decide. It is easy to give them all a try. CM10 and Paranoid Android will perform similarly since PA is based on CM10.. so you don;t have to try both to get a performance feel.

This was in the CM 10 general thread:
soobah said:
Thanks to several people on these forums I now have the Nook color running CM10 fairly responsively, to the point where it doesn't feel all that different to the Nexus7. Huge kudos to the devs on that!
I hope these steps can help others get theirs in the same state. I am using EMMC boot. YMMV so do a backup first.
Firstly, I was having trouble with FC and really bad performance, I traced the issue to something installed on the SDcard (didn't happen if booting with SDcard removed), so I wiped the SDcard, problem fixed.
When installing via clockworkmod (3.2.0.1), I wiped data (aka factory reset), wiped cache partition, (under advanced) wiped dalvik cache. I did not do fix permissions but some suggest that also helped them, pretty sure you need to do that after install though and I've not gotten around to a reboot yet)
1. Settings->performance->interactive
This seems to be the biggest improvement overall. I am wildly speculating that the nook is too laggy at adjusting clock speed in 'on demand' and that is where a fair bit of the sluggishness comes from. I did run with 'Performance' for a while and that is better, and interstingly I didn't find the battery life too bad at all really, so that could be an option for some (I do turn off wifi when not using and that helps heaps with battery).
2. Settings->Performance->I/O scheduler->BFQ (YMMV but worth playing with)
http://forum.xda-developers.com/showpost.php?p=22134559&postcount=4
3. System Tuner app from the Play store https://play.google.com/store/apps/details?id=ccc71.pmw
Tweaks->Sysctl->Recommended
OOM (scroll right past memory top line)->Presets->aggressive
I'm on the Nov13 build atm, not feeling like I need to try any later nightly but I might for interest.
Click to expand...
Click to collapse
It makes the nook run much faster and it has a much better user interface than CM 7
Also run the unofficial build that has a few tweaks that make the nook seem faster with GPU intensive tasks.

i still think the cm10 rom, while experimental, is still the best rom, cm7.2 is old software, it was good at the time, but android4. and 4.1 have alot of enhancements as far as speed, but try 7.2 and compare it. the only person that can tell you what the best rom is, is you.

That Baker Guy said:
i still think the cm10 rom, while experimental, is still the best rom, cm7.2 is old software, it was good at the time, but android4. and 4.1 have alot of enhancements as far as speed, but try 7.2 and compare it. the only person that can tell you what the best rom is, is you.
Click to expand...
Click to collapse
Thank you, as always!
CM10 might be the best ROM on the paper, due to JB's enchantments over GB. However, this particular CM10 is just slow on NC. Basic use, like navigating through system options, settings, menus -- has a lag (w/o any apps). All the time, every time. I must say I didn't try last power settings your recommended on the previous page, since I gave a try to CM 7.2 (Mirage).
CM 7.2 makes NC responsive and fast. (It won't play HD videos in YouTube, only "normal", that's the only thing I noticed so far.)
Regarding CM10, I can give it a try once again if/when becomes faster. Do you think the power settings you gave me most recently would really boost it? I can flash it again. Or CM9 (ICS), I'm following that one as well. Until then, I don't think it's the matter of choice. After all, we all have the same HW here (even though two versions of NC have some differences, but not in speed).
Lastly, I'm a newbie and I can be very wrong.

I have tested all of them, also various nightlies.And although CM10 looks prettier and have better "menu" options (no need to mount sd card when connecting to PC for example), 7.2 is still the fastest rom on Nook Color.

owim said:
Thank you, as always!
Regarding CM10, I can give it a try once again if/when becomes faster. Do you think the power settings you gave me most recently would really boost it? I can flash it again. Or CM9 (ICS), I'm following that one as well. Until then, I don't think it's the matter of choice. After all, we all have the same HW here (even though two versions of NC have some differences, but not in speed).
Lastly, I'm a newbie and I can be very wrong.
Click to expand...
Click to collapse
The power settings definitely make a difference.. whether they would make it better for your use is something nly you can decide. Try them.

Nikola_r said:
I have tested all of them, also various nightlies.And although CM10 looks prettier and have better "menu" options (no need to mount sd card when connecting to PC for example), 7.2 is still the fastest rom on Nook Color.
Click to expand...
Click to collapse
Thanks for your reply! Great you've tested more ROMs so you're experienced with different versions, their benefits and problems.
Right now, I'm on CM 7.2 (Mirage) and like it, fast and smooth enough.
- What do you think about HoneyComb (Android 3) for Nook? If not, than only HC theme would be enough.
- Have you tried power options settings regarding CM10, discussed in this thread?
- What other ROMs except CM 7.2 (Mirage) are worth of exploring? CM9 nightly?
- How about making a dual boot, so I would have a working CM 7.2 on one, and experimental ROMs on second boot (CM9, CM10). Is that safe? Should I be aware of possible issues? I've never done this, but I saw a thread on that here: http://forum.xda-developers.com/showthread.php?p=17834691
Thanks a lot!

Also give v6 Supercharger a try for all ROMs. And, SD Speed Increase with a 2048 heap if you are on 7.2.

owim said:
Thank you, as always!
CM10 might be the best ROM on the paper, due to JB's enchantments over GB. However, this particular CM10 is just slow on NC. Basic use, like navigating through system options, settings, menus -- has a lag (w/o any apps). All the time, every time. I must say I didn't try last power settings your recommended on the previous page, since I gave a try to CM 7.2 (Mirage).
CM 7.2 makes NC responsive and fast. (It won't play HD videos in YouTube, only "normal", that's the only thing I noticed so far.)
Regarding CM10, I can give it a try once again if/when becomes faster. Do you think the power settings you gave me most recently would really boost it? I can flash it again. Or CM9 (ICS), I'm following that one as well. Until then, I don't think it's the matter of choice. After all, we all have the same HW here (even though two versions of NC have some differences, but not in speed).
Lastly, I'm a newbie and I can be very wrong.
Click to expand...
Click to collapse
there were some tweaks in the thread (don't ask I cannot remember where...) that helped make CM10 very usable. Before that I was using MC-ROM...

For me it is a toss-up: either CM10-12/17/12 nightlie or stock B&N 1.4.3, rooted with ManualNooter 5.8.20.
I believe stock/MN is much faster and more reliable.
CM10 is feature rich, slighly slower, and the mail app is far better than stock B&N.
Hey, do both on emmc.
Install MN by following the instructions in the OP here.
Setup your NC for dual boot by following the instructions here.
And Install CM10 12/17/12 and the correct Gapps.
Personally, my NC has stock B&N 1.4.3 rooted with ManualNooter 5.8.20 on the alternate emmc partition and CM 10-nightlie 12/17/12 on primary. Then I can share the uSD card for data.

bluepen61 said:
For me it is a toss-up: either CM10-12/17/12 nightlie or stock B&N 1.4.3, rooted with ManualNooter 5.8.20.
I believe stock/MN is much faster and more reliable.
CM10 is feature rich, slighly slower, and the mail app is far better than stock B&N.
Hey, do both on emmc.
Install MN by following the instructions in the OP here.
Setup your NC for dual boot by following the instructions here.
And Install CM10 12/17/12 and the correct Gapps.
Personally, my NC has stock B&N 1.4.3 rooted with ManualNooter 5.8.20 on the alternate emmc partition and CM 10-nightlie 12/17/12 on primary. Then I can share the uSD card for data.
Click to expand...
Click to collapse
Did you see my post to you about CWM not being available on the CM10 thread? I think I have the solution for your problem.
Sent from my Nook HD+ Running CM10 on SD

leapinlar said:
Did you see my post to you about CWM not being available on the CM10 thread? I think I have the solution for your problem.
Click to expand...
Click to collapse
No. I I missed it. Which CM 10 thread? I have been following the CM 10 nightlife thread.
Sent from my NookColor using xda premium