Hey guys...
Earlier I was having real trouble in changing density on jelly bean rom and neither changing in build prop or nor any third party apps worked.
After lots of search and using all apps I found an app that can finally change dpi even on jelly bean rom.I thaught others still dont know its solution so I m sharing it.you can't apply any hdpi or other themes if u are not able to change LCD density
Link to app-
https://play.google.com/store/apps/...utm_term=play+store-resolution+change/density
Interesting tip:-
Guys u can apply any theme if u change dpi of your phone below 160 either theme is for hdpi or xhdpi devices and if u don't want to change dpi that much,u just change it to 159.Even than all themes will work and it will not make any difference on your stock look
Love to change density but, the main problem faced is the market compatibility issue...else 140 was too beautiful...:good:
Guys pls share if it did work 4 u also as it did work 4 me
oh? so this app is a big deal..hahahha.. been using this since the beginning of jelly bean in our O1,. working good!
roi14 said:
oh? so this app is a big deal..hahahha.. been using this since the beginning of jelly bean in our O1,. working good!
Click to expand...
Click to collapse
Yes dis app is really a big deal for them who want to apply different themes
for change density i use root explorer to go in build.prop and change densityt manually....it working....i use this metod since the rom get out
Paoliz said:
for change density i use root explorer to go in build.prop and change densityt manually....it working....i use this metod since the rom get out
Click to expand...
Click to collapse
OP has already mentioned that, changing density in build.prop didn't worked in JB...
For me work without problem
Inviato dal mio Optimus One
Paoliz said:
For me work without problem
Inviato dal mio Optimus One
Click to expand...
Click to collapse
I tried changing dpi in build prop but it never saved 4 me.it always return to stock one
when i use root explorer, i change denstity here: ro.sf.lcd density=160 and change 160 to 140, press menu and click save, press back and reboot
Paoliz said:
when i use root explorer, i change denstity here: ro.sf.lcd density=160 and change 160 to 140, press menu and click save, press back and reboot
Click to expand...
Click to collapse
I already stated that it did not work 4 me but I was changing to 159,may be its d reason
Now i tried with 150 and phone boot
Inviato dal mio Optimus One
Related
NOTE THIS ONLY WORKS ON THE OVERCOME HERMES AND GOLD ROMS IT DOES NOT WORK ON STOCK GINGERBREAD YOU HAVE BEEN WARNED
UPDATE okay guys i have been doing some testing for those of you who were having problem with the 182dpi settings with black line through the middle on this latest Hermes v2.01 here is the best soulotion. Note before you do this i recomend you use root explorer and back up the stock home launcher from system/apps its called Touchwiz home launcher if you want to revert back to stock you need to replace this file back there i have included a zip file below of the original stock launcher.
step 1) Download the Overcome v2.0.1 stock theme patch here http://overcome.mimzo.com/?page_id=558
step 2) Apply the patch with recovery install zp from sd card and reboot.
step 3) Change your resolution via system/build.prop and edit the line LCD density change from 240 to 182 save and exit this is using root explorer (COPY YOUR ORIGINAL BUILD.PROP FILE TO SD)
step 4) Download TouchWiz4 for Gingerbread Tab here (Make sure you download the 182dpi one) http://forum.xda-developers.com/showthread.php?t=1077641 and install the zip file again via recovery after that wipe dalvik catch and reboot.
step 5) Now you will have a brilliant 182 dpi screen resoulotion with no lines and using the samsung galaxy s2 touchwiz launcher i hope you like this tutorial please hit the thanks button if it helped you.
Look below for a preview
Great work. Using this method now and I love the smaller resolution... Question though. Would say Koshs theme flash onto this without issue? Our would requesting a 182 dpi version from him be the way to go?
Sent from my "better than an iPad" tab... Running Overcome GINGERBREAD!!!
btyork said:
Great work. Using this method now and I love the smaller resolution... Question though. Would say Koshs theme flash onto this without issue? Our would requesting a 182 dpi version from him be the way to go?
Sent from my "better than an iPad" tab... Running Overcome GINGERBREAD!!!
Click to expand...
Click to collapse
I would request a 182dpi from him cause i think his theme is 240dpi
hi there jutley, just wondering since you instal the touchwiz 4 on your tab, does the landscape mode work? i installed it when my tab was on RC1 but the problem is the landscape on touchwiz 4 on that link does not work. i really liked touchwiz 4 but sad to say it is have some bug in it. hoping you can shed some light on this one....
Currently, no, landscape does not work for tw4 on the tab.
Sent from my "better than an iPad" tab... Running Overcome GINGERBREAD!!!
lunatechpsp said:
hi there jutley, just wondering since you instal the touchwiz 4 on your tab, does the landscape mode work? i installed it when my tab was on RC1 but the problem is the landscape on touchwiz 4 on that link does not work. i really liked touchwiz 4 but sad to say it is have some bug in it. hoping you can shed some light on this one....
Click to expand...
Click to collapse
I have been told that it will be updated soon for landscape so watch this space.
Hexagonal Battery Indicator
jutley said:
I would request a 182dpi from him cause i think his theme is 240dpi
Click to expand...
Click to collapse
+1
Also, I tght I saw the Heagonal Battery indicator in the initial OC Theme but it appearss like normal (same in the OP screenshot).. I liked it.. but not getting it for some reason.. any ideas if this is due to 182 dpi?
hey guys i'm k0sh .. so you guys want the theme for 182 . could you tell me how to do it and i'll do it ? is it i have to resize the pixels of the status bar ? any ideas , pls come to my thread and spell it out there
k0sh said:
hey guys i'm k0sh .. so you guys want the theme for 182 . could you tell me how to do it and i'll do it ? is it i have to resize the pixels of the status bar ? any ideas , pls come to my thread and spell it out there
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=1077641 and download the 182dpi zip have a look inside i am sure you will figure the changes out goodluck.
jutley said:
Go here http://forum.xda-developers.com/showthread.php?t=1077641 and download the 182dpi zip have a look inside i am sure you will figure the changes out goodluck.
Click to expand...
Click to collapse
sure i'll do , but not now , i have assignment i have to submit tomorrow .. Maths omg i hate maths god help pls . rofl
btw .. can i ask you something .. how the launcher can affect on the bugs u got after u chenge to 182 ? ? its not about the launcher tough .. , i heard that my theme works good with your guide ... i'll add your thread in my theme thread if you don't mind .. credit will be given ...
http://forum.xda-developers.com/showpost.php?p=14376486&postcount=1 check this Jutley
k0sh said:
http://forum.xda-developers.com/showpost.php?p=14376486&postcount=1 check this Jutley
Click to expand...
Click to collapse
Hi thanks i am here to help and pass my knoleadge on
jutley said:
Hi thanks i am here to help and pass my knoleadge on
Click to expand...
Click to collapse
good and i'm sure you'll help alot cheers
Hey guys go to SGS1 and check touchwiz 4 it been fixed and cracked. But its a little bit nasty. But worth to try
EDIT just edit what the thumb keyboard wrote instead of FIXED ...
here is the link guys , go check it http://forum.xda-developers.com/showthread.php?t=1061883&page=55
Sent from my GT-P1000 using Tapatalk
Hi guys,
I didn't find ro.sf.lcd_density=240 in build.prop with ROM toolbox :crying:
Is there an other way to fix it lower ?
edit: 240 was just an exemple Yes I looked build.prop with toolbox but like u said there's nothing about density,
willou60 said:
Hi guys,
I didn't find ro.sf.lcd_density=240 in toolbox :crying:
Is there an other way to fix it lower ?
Click to expand...
Click to collapse
If your rooted you can use Root Explorer to edit the build.prop. Have you tried that?
*edit* hmm, I just looked inside there and don't see that line anywhere. It would most likely read 320 or higher also. 240 was used for 4.3" screens
Sent from my X909 using Tapatalk 2
I did not find LCD Density line in build.prop. When I tried using the LCD Density app to change to 320 it would not boot properly (stuck at Oppo logo). Having a more appropriate number would make this thing awesome. Hoping someone figures this out.
Sent from my Oppo Find 5 using Tapatalk 2
Has anyone been able to change the DPI yet?
Thanks to like this threat !
If many people like it, maybe Oppo will allow to change it!
http://www.oppoforums.com/threads/allow-to-change-the-dpi.1087/
Did you try this app?
https://play.google.com/store/apps/details?id=com.birdapi.android.dpipro
tomatende2001 said:
Did you try this app?
https://play.google.com/store/apps/details?id=com.birdapi.android.dpipro
Click to expand...
Click to collapse
Be careful with using the apps to change the LCD Density. That put my oppo into a boot loop. I did not see a line with LCD Density in the build.prop. I wonder if we can just add one.
Sent from my LG-E973 using Tapatalk 2
mlee1999 said:
Be careful with using the apps to change the LCD Density. That put my oppo into a boot loop. I did not see a line with LCD Density in the build.prop. I wonder if we can just add one.
Sent from my LG-E973 using Tapatalk 2
Click to expand...
Click to collapse
As long as you don't use any app to "set on boot" you should be able to play around and find a density that is stable and works. Its been suggested that OPPO add a way to change this.. we'll if they do
Sent from my X909 using Tapatalk 2
mlee1999 said:
Be careful with using the apps to change the LCD Density. That put my oppo into a boot loop. I did not see a line with LCD Density in the build.prop. I wonder if we can just add one.
Sent from my LG-E973 using Tapatalk 2
Click to expand...
Click to collapse
I read this from other apps, not from this one. I used this app on my HTC HD2 with JB before it crashed. Now I wait for my Find 5 and also would like to change the dpi. I see anyone in the Oppo forum that used a launcher with dpi changer. Look there into the Homescreen thread.
http://www.oppoforums.com/threads/show-us-your-homescreens.581/page-5#post-20422
Kasnblack said:
Has anyone been able to change the DPI yet?
Click to expand...
Click to collapse
Hi everyone,
at the very end of build.prop, add ro.sf.lcd_density=xxx, I tried from 300-440 and they worked out fine. I did reboot to cwm and than simply did reboot system. To make sure the changes made are read by the phone. Sometimes earlier doing this on h7 g3, the changes were not read by only rebooting.
You have to be root and you need explorer and texteditor.
cptmerget
cptmerget said:
Hi everyone,
at the very end of builder.prob, add ro.sf.lcd_density=xxx, I tried from 300-440 and they worked out fine. I did reboot to cwm and than simply did reboot system. To make sure the changes made are read by the phone. Sometimes earlier doing this on h7 g3, the hanges were not read by only rebooting.
You have to be root and you need explorer and texteditor.
cptmerget
Click to expand...
Click to collapse
Do you mean I have to add the ro.sf.lcd_density lin to build.prop, because I can't seem to find a builder.prop file. I suppose that was a typo.
Kasnblack said:
Do you mean I have to add the ro.sf.lcd_density lin to build.prop, because I can't seem to find a builder.prop file. I suppose that was a typo.
Click to expand...
Click to collapse
Thank you correcting this. Of cause it is build.prop in the system folder.
I corrected this now in my previous post.
cptmerget.
I don't know if this method has been already posted or not..
I was very eager to change my s2's DPI..and I could not able to find any proper and simple method..
Then I was going through build.prop and eventually I changed the DPI by editing build. prop
Here is a simple guide..
1. Open root explorer..
2. Make sure you are in r/w ..(see at the top right corner)
3.open system.
4.you can see "build.prop" ..
5.long press build.pro and select "open with".
6.choose "text editor".
7.look for the words "ro . sf . lcd _ density 240".
(In some ROM it will be at two places ..e.g neat ROM )
Edit it and type your required DPI..
8.now press the back button and select "yes".. ( this means your settings which you have made has been saved)
9.back up of build. pro will be created automatically as
"Build.prop.pak"
10.reboot.
P.S methods looks complex but it's simple to follow.
I have given step by step guide..
"VIVEK NEEL"
Few screenshot ..
Its at 200 DPI.
Sent from my GT-I9100 using xda premium
Also u people can use the below apps to change dpi
https://play.google.com/store/apps/...oogle&utm_medium=organic&utm_term=dpi+changer
https://play.google.com/store/apps/...le&utm_medium=organic&utm_term=texdroider+dpi
SENT USING VIVEKROM_OMNI
corruptionfreeindia said:
Also u people can use the below app to change dpi
https://play.google.com/store/apps/details?id=com.marutian.dpichanger&referrer=utm_source%3Dgoogle%26utm_medium%3Dorganic%26utm_term%3Ddpi+changer
SENT USING VIVELROM_OMNI
Click to expand...
Click to collapse
Also u can use texdroider dpi...
And I guess ur rom name is vivek not vivel my friend
doctor_droid said:
Also u can use texdroider dpi...
And I guess ur rom name is vivek not vivel my friend
Click to expand...
Click to collapse
Oops.
How do u know that I wonder?
Thanks buddy btw
SENT USING VIVEKROM_OMNI
Thanks .. but the Touchwiz is not properly resized
corruptionfreeindia said:
I don't know if this method has been already posted or not..
I was very eager to change my s2's DPI..and I could not able to find any proper and simple method..
Then I was going through build.pro and eventually I changed the DPI by editing build. pro..
Here is a simple guide..
1. Open root explorer..
2. Make sure you are in r/w ..(see at the top right corner)
3.open system.
4.you can see "build.prop" ..
5.long press build.pro and select "open with".
6.choose "text editor".
7.look for the words "ro . sf . lcd _ density 240".
(In some ROM it will be at two places ..e.g neat ROM )
Edit it and type your required DPI..
8.now press the back button and select "yes".. ( this means your settings which you have made has been saved)
9.back up of build. pro will be created automatically as
"Build.prop.pak"
10.reboot.
P.S methods looks complex but it's simple to follow.
I have given step by step guide..
"VIVEK NEEL"
Click to expand...
Click to collapse
Thanks for your note here.
But Touchwiz is not resized properly over the screen. e.g. Dial screen only spans to around 80-85% of the screen (If I reduce the density value from 240 to 220 on Galaxy S2 Android 4.1.2) and not to full 100% like other applications. Chrome, Whatsapp, Skype etc. does works with this ..
Any idea or any solution to this ??
XaErO_Xion said:
Thanks for your note here.
But Touchwiz is not resized properly over the screen. e.g. Dial screen only spans to around 80-85% of the screen (If I reduce the density value from 240 to 220 on Galaxy S2 Android 4.1.2) and not to full 100% like other applications. Chrome, Whatsapp, Skype etc. does works with this ..
Any idea or any solution to this ??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2303535
Sent from my GT-I9100 using Tapatalk 2
You should also mention not to set DPI below 182. If i remember right you wont be able to make a call with lower DPI. Didnt test myself (it was the case in earlier versions) as 182 is the perfect value for my device.
SlimKat|Gustavo_s|i9100|¬Tapa
leechseed said:
You should also mention not to set DPI below 182. If i remember right you wont be able to make a call with lower DPI. Didnt test myself (it was the case in earlier versions) as 182 is the perfect value for my device.
SlimKat|Gustavo_s|i9100|¬Tapa
Click to expand...
Click to collapse
I use my mobile at 180 dpi.
And mod my tw launcher to be at 180.
Have a look at the guide which I have posted .
Up
Sent from my GT-I9100 using Tapatalk 2
Did you try any lower? Well it could have been in GB, where you shouldnt go lower than 182 (or 180?!) i dont remember exactly.. I know how to change dpi, im always doing it manually with root explorer just as you posted above.
SlimKat|Gustavo_s|i9100|¬Tapa
Nice thanks @Vivek_Neel
Enviado desde mi GT-I9500 mediante Tapatalk
thanks for the note:good:
And if i want manual edit any application DPI?
gljiva said:
And if i want manual edit any application DPI?
Click to expand...
Click to collapse
Xposed module
Sent from my GT-I9100 using Tapatalk 2
Vivek_Neel said:
Few screenshot ..
Its at 200 DPI.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thanks for the info but what font is that in you're ss ?
J 3 M said:
Thanks for the info but what font is that in you're ss ?
Click to expand...
Click to collapse
Am sure its one of the sans fonts.
Don't remember exactly
Typed using Iphone kb and sent from my GT-I9100 using Tapatalk 2
Is rhere any chance to change dpi but only keyboard dpi? I saw in lg g2 that system has another dpi than keyboard. So is a chance to change only the keyboard dpi? I want to have for egzample 200dpi whole system but i want have bigger keyboard for egzample 240 stock dpi any solution?
Wysłane z mojego GT-I9100 przy użyciu Tapatalka
mosespl said:
Is rhere any chance to change dpi but only keyboard dpi? I saw in lg g2 that system has another dpi than keyboard. So is a chance to change only the keyboard dpi? I want to have for egzample 200dpi whole system but i want have bigger keyboard for egzample 240 stock dpi any solution?
Wysłane z mojego GT-I9100 przy użyciu Tapatalka
Click to expand...
Click to collapse
May be You have to Mod SamsungIME.apk
Vivek_Neel said:
Xposed module
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
which one?
blank800 said:
which one?
Click to expand...
Click to collapse
App settings module my friend
Now that we have 4.4.2 ROM (test build though) how about focus on getting goodies from Note10.1 (2014 Edition) like air command etc. As we know the features for the Note10.1 (2012 edition) would be limited even in the final build of this ROM it is upon the mighty developers here at XDA to make our very capable device perform its optimal.
The snote mod from 2014 note10.1 developed by eric-mod. This is not my work but I am simply putting all mods for convinience.
http://forum.xda-developers.com/showthread.php?p=52236527
Sent from my GT-N7100 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=48215319
Another mod to add floating multi windows against just 2 windows. Contributed by 'Xperiacle'
Only for rooted ones running this rom.
Download an build.prop editor from the play store or sth like that and change the following lines to :
"ro.product.name=viennaltexx" and "ro.product.device=viennalte"
"ro.product.model=SM-P905"
This will activate some hidden function. You'll get the Note PRO recent apps and notification toggle icons!
contributed by Eric-mod
+1 to thread idea, thanks guys for the contributions, so quick
community 1 corp 0
Prashant Mishra said:
Only for rooted ones running this rom.
Download an build.prop editor from the play store or sth like that and change the following lines to :
"ro.product.name=viennaltexx" and "ro.product.device=viennalte"
"ro.product.model=SM-P905"
This will activate some hidden function. You'll get the Note PRO recent apps and notification toggle icons!
contributed by Eric-mod
Click to expand...
Click to collapse
didn't work for me after the reboot the changes haven't been made?
Edit in build prop editor
fruity_senpai said:
didn't work for me after the reboot the changes haven't been made?
Click to expand...
Click to collapse
you need to open build.prop editor and go to edit, change values and then save. check with root checker and it will show your device as SM-P905.
Prashant Mishra said:
you need to open build.prop editor and go to edit, change values and then save. check with root checker and it will show your device as SM-P905.
Click to expand...
Click to collapse
Ive got it working with the third editor i tried but the phone app started crashing so i restored the settings.
hoopi18 said:
Ive got it working with the third editor i tried but the phone app started crashing so i restored the settings.
Click to expand...
Click to collapse
which one did you use
EDIT: i did it with root explorer because all build.prop editor i tried didn't save my changes.
I used buildprop editor from play store.
Sent from my GT-N7100 using xda app-developers app
fruity_senpai said:
which one did you use
EDIT: i did it with root explorer because all build.prop editor i tried didn't save my changes.
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=ro.ciubex.propeditor
This was the one that saved my changes
Got a screenshot?
My did not allow me any program to edit those files, reboot and return to the initial configurations, which unlocks new features and new applications have the galaxy note pro?
Prashant Mishra said:
Only for rooted ones running this rom.
Download an build.prop editor from the play store or sth like that and change the following lines to :
"ro.product.name=viennaltexx" and "ro.product.device=viennalte"
"ro.product.model=SM-P905"
This will activate some hidden function. You'll get the Note PRO recent apps and notification toggle icons!
contributed by Eric-mod
Click to expand...
Click to collapse
In the case N-8000 this mod produces totally inestable situation. Phone will not work 100% of the times. If you reset, the pda will not start (infinite loop). Finally I had to wipe and reinstall everything from scratch
Wanam Xposed mod can edit the multi-window entries to allow just about any app to work with it
Sent from my SM-P905 using Tapatalk
Phone, phablet, tablet
Does anyone know of a mod for switching between tablet, phablet and phone modes... personally I'd like to get phone mode myself....
torchwolfery said:
Does anyone know of a mod for switching between tablet, phablet and phone modes... personally I'd like to get phone mode myself....
Click to expand...
Click to collapse
Maybe you could try the exposed modules Phab7 or TabletUI trigger.
jika23 said:
Maybe you could try the exposed modules Phab7 or TabletUI trigger.
Click to expand...
Click to collapse
I tried phab7 but it didn't work and tablet trigger doesn't it just trigger tablet mode?
Check this guide to enable particle effect and note 3 effect, it works! I didn't discovered this, i m only reporting! http://forum.xda-developers.com/showthread.php?t=2702528 follow only the first part, set to 4 to have note 3 effect! Heres the original thread! http://forum.xda-developers.com/showthread.php?p=52306274 (thanks to this guide you can also enable grid settings) I think we need a mod for toggles, there are only 15 toggles
How to install multi-window transparency option?
I saw in an earlier post, but did not understand installing.
Sorry, my english no is very good.
Im from mexico
FGM 11 said:
How to install multi-window transparency option?
I saw in an earlier post, but did not understand installing.
Sorry, my english no is very good.
Im from mexico
Click to expand...
Click to collapse
flash/install it via cwm or twrp recovery
google it if you don't know how to flash file via recovery
I´m root in my Oneplus Two, and downloaded texdroider_dpi and Root DPI Changer.
Neither works!!
I tried too change build.prop, but ro.sf.lcd_density or another density value don´t appears.
Any solution for change DPI in OP2?
Thanks!
Hey,
i use a flashable zip. Download it from here: http://www5.zippyshare.com/v/RvfbVEkr/file.html
to edit the DPI, open the .zip and go to folder tmp and edit the "misc" file with a text editor.
after this you can flash it trough recovery
Greetings
CoreGaming said:
Hey,
i use a flashable zip. Download it from here: http://www5.zippyshare.com/v/RvfbVEkr/file.html
to edit the DPI, open the .zip and go to folder tmp and edit the "misc" file with a text editor.
after this you can flash it trough recovery
Greetings
Click to expand...
Click to collapse
Thanks!!
The flashable zip works prefectly!!
franzisms said:
Thanks!!
The flashable zip works prefectly!!
Click to expand...
Click to collapse
What DPI did you set it to, and have you experienced any issues with your custom DPI so far?
Waterdroid said:
What DPI did you set it to, and have you experienced any issues with your custom DPI so far?
Click to expand...
Click to collapse
I set 380 DPI, and I have not found errors for now.
350 DPI, the default one in the zip, I´m encounter all the system elements too small.
franzisms said:
I set 380 DPI, and I have not found errors for now.
350 DPI, the default one in the zip, I´m encounter all the system elements too small.
Click to expand...
Click to collapse
Can you post some pictures? I would be interesting to see the effect before I commit to flashing.
khr0n0s said:
Can you post some pictures? I would be interesting to see the effect before I commit to flashing.
Click to expand...
Click to collapse
Here @ 380 DPI
khr0n0s said:
Can you post some pictures? I would be interesting to see the effect before I commit to flashing.
Click to expand...
Click to collapse
I´m newbie and I can´t post pictures yet, sorry.
But I seen a few mistakes in some apps, but I don´t know if problem of Oxygen OS or DPI.
Some apps like Solid Explorer or PocketCast get default Dark Theme.
That is, even if they are placed in Light theme in settings app , stay in dark theme and I can´t change this no way. This is case of Pocket Cast.
In Solid Explorer case, it stay in light theme, but text are in white and can´t read nothing. I must put the app in dark theme to use it .
It is all very strange .
franzisms said:
I´m newbie and I can´t post pictures yet, sorry.
But I seen a few mistakes in some apps, but I don´t know if problem of Oxygen OS or DPI.
Some apps like Solid Explorer or PocketCast get default Dark Theme.
That is, even if they are placed in Light theme in settings app , stay in dark theme and I can´t change this no way. This is case of Pocket Cast.
In Solid Explorer case, it stay in light theme, but text are in white and can´t read nothing. I must put the app in dark theme to use it .
It is all very strange .
Click to expand...
Click to collapse
I see no prob with 380 all apps work as before and no fcs till now
I don't have any intentions to advertise, but recently I published a DPI Changer app to Play Store which by default sets DPI using local.prop method(works fine on COS12 and OxygenOS on OnePlus One) and also has an option to set it via build.prop method. I positively believe it would work for OnePlus Two too, if not I would love some feedback.
Link - https://play.google.com/store/apps/details?id=me.nisarg.setdpi&hl=en
franzisms said:
I´m root in my Oneplus Two, and downloaded texdroider_dpi and Root DPI Changer.
Neither works!!
I tried too change build.prop, but ro.sf.lcd_density or another density value don´t appears.
Any solution for change DPI in OP2?
Thanks!
Click to expand...
Click to collapse
Easiest way is adding the line ro.sf.lcd_density=380 in the build.prop
billy_boolean said:
Easiest way is adding the line ro.sf.lcd_density=380 in the build.prop
Click to expand...
Click to collapse
franzisms said:
I´m newbie and I can´t post pictures yet, sorry.
But I seen a few mistakes in some apps, but I don´t know if problem of Oxygen OS or DPI.
Some apps like Solid Explorer or PocketCast get default Dark Theme.
That is, even if they are placed in Light theme in settings app , stay in dark theme and I can´t change this no way. This is case of Pocket Cast.
In Solid Explorer case, it stay in light theme, but text are in white and can´t read nothing. I must put the app in dark theme to use it .
It is all very strange .
Click to expand...
Click to collapse
The way I did it was going in and adding the ro.sf.lcd_density=380 to the build.prop myself as for some reason it wasn't there. Then I connected the OPT to the computer and used the ADB Command Prompt (adb shell wm density 380) to change the DPI as well.
I had to do this because if I used an app to change the DPI the keyboards would screw up and be incredibly large and unusable.
Can someone please post some screenshots? Thank you in advance
Inviato dal mio ONE A2001 utilizzando Tapatalk
XxNiKxX said:
I don't have any intentions to advertise, but recently I published a DPI Changer app to Play Store which by default sets DPI using local.prop method(works fine on COS12 and OxygenOS on OnePlus One) and also has an option to set it via build.prop method. I positively believe it would work for OnePlus Two too, if not I would love some feedback.
Link - https://play.google.com/store/apps/details?id=me.nisarg.setdpi&hl=en
Click to expand...
Click to collapse
Thanks but it doesn't seem to work for me
injectx said:
Thanks but it doesn't seem to work for me
Click to expand...
Click to collapse
Did you try the Build.prop method?
XxNiKxX said:
Did you try the Build.prop method?
Click to expand...
Click to collapse
Yes
injectx said:
Yes
Click to expand...
Click to collapse
Damn that's weird, thanks for the feedback! I'll look into it ASAP.
I updated the app to specifically work on OnePlus 2, can anyone try and tell if it's working? Thanks.
Link - https://play.google.com/store/apps/details?id=me.nisarg.setdpi&hl=en
Le DPI working fine in Oneplus 2 (oxygen 2.0.1) using BUILD. PROP.
thanks
my experience with the app " The DPI "
First I tried with the second function of the app (BUILD. PROP) and restarting the phone had a bootloop.
Fortunately I had a Nbackup
According to the first attempt I tried the first method off the app , rebooted and nothing changed then I tried again the BUILD. PROP and it worked!
perhaps the first method have created something away for work the second method
Danilo