Related
OK, everybody is claiming that low in call volume is fixed after 3/8 kernel, but try this: dial a number by keypad (with dial pad tones enabled) and make a call. listen to the volume level. Then disable dial pad tones and call again. there should be a huge difference in volume level. You can experiment the same thing by quickly enabling and disabling speakerphone while in a call. I guess the problem is, when a sound is played back (like a ringtone or dialpad tone) in call volume is reduced for a short time. This can be eliminated for outgoing calls by disabling dial pad tone or waiting 2 seconds before pressing call. But for incoming calls, even disabling ringtone is no good. I also tried LVH v3.6 to boost the in call volume but no good. I tried almost all builds, ROM and radio combinations. With the new kernels, all have this problem. The most important function for me is the phone part, anyone has a solution for this?
Did you really need to make a new thread for this? Couldn't this been posted in one of the -post your questions here- topic?
Fix: No, there's no obvious fix (yet). Best fix is to use the supplied (or custom) ear-piece. Never any problem with that.
I felt the need to make a new thread as the old threads were referring to old kernels and most people tend to read only the first post. I wanted to present my observations, which I believe are not stated before, in the original post. Sorry for bothering you and thanks for the info.
ozkaya said:
I felt the need to make a new thread as the old threads were referring to old kernels and most people tend to read only the first post. I wanted to present my observations, which I believe are not stated before, in the original post. Sorry for bothering you and thanks for the info.
Click to expand...
Click to collapse
I understand why you'd want to open a new thread for this, but this topic will just as much go down under as soon as it's solved or (more not-so-useless) threads get added later on.
Your observations + results could be stickied/hotlinked in the answer topic if they seem to be right-on the money. That way we keep it all nice and tidy, ánd more people would find a quick answer
I have the same exact problem. I hope there is a fix for this soon. Searched multiple times, but haven't found any answer.
I notice when you pick up an incoming call. The volume starts from soft and goes a little louder after about 2-3 seconds.
hi im also suffering from a low in call volume as well with my HD2 has there been any way to resolve this?
iam facing low rington and media volume , i can hardly hear my ringtone when on other room
I disagree with maseo I found this thread useful,
THANKS DUDE
Sent from my HTC HD2 using XDA App
hey, try this
when u wait for the other side to pick up the phone or u pressed the answer button when a call comes in
press on the Speaker button to use the speaker phone, then turn it off
repeat it again once
your volume will get lounder just like in WM.
Edit: oops. it was just a hardware failure, the front speaker had bad connection, there are another speaker in the chassis that worked.
thanks
i press the speaker on & off and then is more louder. i wish this will be fix soon.
IT WORKS!!
Hey, so I was/am having this problem but i tried the mute/unmute during a call and it worked. Incoming and outgoing. Only problem is seems to be low every new phone call. So i have to do the mute/unmute at the beginning of each call for it to be ok!
Hopefully there is a permanent fix soon?
Thanks for the post.
I have this same problem. I read somewhere someone having a fix on this.
One more thing, any of you guys had the robo-voice?
Got the same issue. Still no fix out there?
I am a beginner and i just got done flashing that Rom, With my Previous roms that i have tested everything seems to work perfect except for a couple of issues, When placing a call i hear alot of static on my side and the other side of the phone as well in which no one can hear as to what i am saying. Any Ideas as to what it could it be? I have the New Mod plus the Magdlr and the Clockwork mod recovery plus the Radio 2.15.
Could be the "robot voice". I've heard that you can fix it permenently by disabling key tones in the dialer, or fix till you restart by going into speakerphone and then out of speakerphone while in a call.
This type of post would be better put in that rom's thread, though a search of that rom's thread would have turned up your answer (if you knew to call it robot voice in the search)
Thanks i disabled Audible Tones and thats gone now ! I am still learning on what to do and This flash was my first !
just remember many/most of the roms have that 'robot voice' on the first call. either disable the tones, as you did,
or
first boot after a fresh flash/hard reset, make a call, hit loudspeaker, turn off loudspeaker, hang up, and it will be gone.
Good morning,
This is my first post. I have recently downloaded and flashed Yukis (7392) ROM updated on 5/16 and for some reason when someone calls in, and I have the earphones in, the person calling gets a fast busy signal. The Caller ID will splash on the screen and instantly go away as if slide screen was activated and the ignore button was pressed. I want to say this is a ROM issue for the last ROM I used (HD20) would attenuate the sound and the call would come thru. I havent tried any other 7392 ROMS to be sure, Just wanted to know if anyone else had this issue with Yukis ROM. And, if we do find it to be a ROM issue can someone inform yuki as I can not because my post count is too low.
Thanks,
Dirty
UPDATE:
Looks to be a Update issue. I just tried it with HD20 rom with the same results. Am I the only user seeing this? I searched the FAQ and I did not see anything stating that this is a Bug. ???
Resolution
So i played around with this for a While and it seems that if you turn off both options in the "Ease of Access' menu then you will be able to receive calls with the headphones plugged in. This also works with mic'd headphones as well.
Thanks,
Dirty
I hadn't even thought of this! I usually turn those options off & hadn't when I switched roms. I'm going to try this when I get home and let you know if it worked for me as well.
Q&A for [ROM][5.0.2][LOLLIPOP][KLTE]RESURRECTION REMIX_lp 5.2.9[WIP]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][LOLLIPOP][KLTE]RESURRECTION REMIX_lp 5.2.9[WIP]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is bluetooth and nfc working on this rom?
Nice work so far mate.
would you a build to SM-G900FD?
Hiding Bottom Softkeys
Just flashed to 5.3.1 on my GT900F. Just wondering if there is a way to remove the softkeys at the bottom of the screen as they do exactly the same thing as the hardware keys.
Thanks,
EDIT: Found the option (I was looking in the wrong place) for anyone else who is having trouble it is located in:
Settings > Resurrection Tools -> Interface -> Navigation bar options -> Disable
I seem to have another issue - What seems to occur randomly when a press something (the home button usually), i keep getting a "static" sort of noise come through the speakers. It lasts about 5 seconds and then goes off. The noise is not effected by adjusting the volume, as in if I had the volume on a low setting the noise would be heard at the same volume as it it was on a higher setting.
Music plays fine.
Dan7712 said:
I seem to have another issue - What seems to occur randomly when a press something (the home button usually), i keep getting a "static" sort of noise come through the speakers. It lasts about 5 seconds and then goes off. The noise is not effected by adjusting the volume, as in if I had the volume on a low setting the noise would be heard at the same volume as it it was on a higher setting.
Music plays fine.
Click to expand...
Click to collapse
Found the issue - It seems the notification sounds are crashing as they were being played. Hence why I am getting the "static" sort of sound when I am pressing the home key, volume controls and clicking on apps / using the keyboard. It happens about once every 15 mins or so. The short fix is just to disable the touchscreen sounds in the settings.
ringtone issue on klte
Hello i have a question about the ringtone. Did you fix the ringtone issue on klte. When i recive a call, the sound is not loud and clear. There are comming strange sounds from the speaker, but only on ringtones like (cyantone) But when i listen music is everything normal. I hope you understand my problem. Sorry for my English.
ringtone issue on klte
I still have the issue with the ringtone on the latest build 27.01.2015 on my klte ?
camera
Does the new stock camera have autofocus ?
i ma not at home and cant download the new rom...
screen off on wake?
is anyone getting screen waking bugs? like I can wake it but when I go to unlock the screen it goes black, I might try a reflash and see if that fixes it, loving this ROM on my s3, thought I'd update my gf s5 as well
disregard that, it was her flip case setting off the nfc auto lock whilst flipped behind, I'll have to suss that one out..
This may be a weird and dumb question, but, will this work on the Verizon Wireless G900 S5?
silent modus
working rly good, good job
is it possible to receive notifications when in silent modus somehow? ambient display not working in silent modus either.
No 4G option for lollipop
Why is it only LTE/3G and no 4G network on lollipop roms?
Hello All
I bought myself an Asus Zenfone 2 Laser Ze550KL a couple of weeks back.
An overall good phone. But I am facing an irritating issue.
The phone's microphone does not work from some point onwards. Once this happens, when attending(or making) a call, the other person wont be able to hear me.
I am not sure whether its a hardware issue or a software issue. Because once I restart the phone everything is perfect once again. After maybe a couple of calls, the problem resurfaces.
I read in multiple forums of this issue (even in Zentalk) , but nobody has a clean solution. Some of the solutions were -to disable Ok Google Detection, to enable call recording, to switch to loudspeaker, to reboot the phone and so on.
Enabling loud speaker works for me. When I realize the other person cannot hear me, I switch to loud speaker and then he is able to hear me.
Did anybody come across this issue? Is it a software issue? Any help/ideas/suggestions would be nice.
I am hoping its a software bug which will be hopefully fixed in the next system update or so.
Thanks
Hmm that's an odd one I can tell you that I have call recording enabled on a ze551kl and haven't had this issue, but I'm not sure if its specific to the 550 or not. I haven't actually recorded any of my calls, it just pops up and asks me if I want to every time and I tap cancel.
Sent from my ASUS_Z00TD using Tapatalk
CKtheProblem said:
Hmm that's an odd one I can tell you that I have call recording enabled on a ze551kl and haven't had this issue, but I'm not sure if its specific to the 550 or not. I haven't actually recorded any of my calls, it just pops up and asks me if I want to every time and I tap cancel.
Sent from my ASUS_Z00TD using Tapatalk
Click to expand...
Click to collapse
Its not about recording calls.. Its about the recipient not hearing me. The microphone is what is bothering me. I doubt the issue is with the noise cancellation of microphones. Perhaps cancelling more than noise.
When I reboot the phone, everything starts working normally. After a few calls the problem returns, the recipient not hearing me!.
The temporary fix for me is switching to loud speaker. I dont know why, but the mic starts working when in loud speaker. The moment i switch it back to handson, the recipient is again not able to hear me.
Read a few forums in zentalk reporting the same issue
www(dot)asus.com/zentalk/forum.php?mod=viewthread&tid=14486
I am seriously hoping it is a software bug which would be fixed in the next update or so.
I tried the hardware test which behaves differently when the problem occurs and when it is problem free.
The hardware test is perfect if i test the mic just after reboot and when everything is normal.
But once i find out that the recipient is unable to hear me (after maybe a couple of calls/days after the reboot) , i did the hardware test again and certainly was different. A buzz at all times with my voice being completely muffled. Something to do with the noise cancellation mic i believe.
I have tried disabling OK Google Detection.
I have tried enabling call recording.
I have tried reseting factory settings , clear wipe partitions etc.
I have tried enabling dialer pad tones (Dont know why this was marked as a solution in some forums)
But all of the above was not a solution for me. Switching to loudspeaker works. And rebooting the phone (which is irritating during important calls) also works.
Any help would be nice.
[email protected] said:
Its not about recording calls.. Its about the recipient not hearing me. The microphone is what is bothering me. I doubt the issue is with the noise cancellation of microphones. Perhaps cancelling more than noise.
When I reboot the phone, everything starts working normally. After a few calls the problem returns, the recipient not hearing me!.
The temporary fix for me is switching to loud speaker. I dont know why, but the mic starts working when in loud speaker. The moment i switch it back to handson, the recipient is again not able to hear me.
Read a few forums in zentalk reporting the same issue
www(dot)asus.com/zentalk/forum.php?mod=viewthread&tid=14486
I am seriously hoping it is a software bug which would be fixed in the next update or so.
I tried the hardware test which behaves differently when the problem occurs and when it is problem free.
The hardware test is perfect if i test the mic just after reboot and when everything is normal.
But once i find out that the recipient is unable to hear me (after maybe a couple of calls/days after the reboot) , i did the hardware test again and certainly was different. A buzz at all times with my voice being completely muffled. Something to do with the noise cancellation mic i believe.
I have tried disabling OK Google Detection.
I have tried enabling call recording.
I have tried reseting factory settings , clear wipe partitions etc.
I have tried enabling dialer pad tones (Dont know why this was marked as a solution in some forums)
But all of the above was not a solution for me. Switching to loudspeaker works. And rebooting the phone (which is irritating during important calls) also works.
Any help would be nice.
Click to expand...
Click to collapse
To OP,
This is for most of the guys. It's a software issue, dont worry, Just update to latest update. Which happened to me the same, and solved when i updated some random OTA update fix by asus. So the current version on my phone now is LRX22G.WW_user_1.15.40.639_20151029044030520_201505210103
[email protected] said:
Its not about recording calls.. Its about the recipient not hearing me. The microphone is what is bothering me. I doubt the issue is with the noise cancellation of microphones. Perhaps cancelling more than noise.
When I reboot the phone, everything starts working normally. After a few calls the problem returns, the recipient not hearing me!.
The temporary fix for me is switching to loud speaker. I dont know why, but the mic starts working when in loud speaker. The moment i switch it back to handson, the recipient is again not able to hear me.
Read a few forums in zentalk reporting the same issue
www(dot)asus.com/zentalk/forum.php?mod=viewthread&tid=14486
I am seriously hoping it is a software bug which would be fixed in the next update or so.
I tried the hardware test which behaves differently when the problem occurs and when it is problem free.
The hardware test is perfect if i test the mic just after reboot and when everything is normal.
But once i find out that the recipient is unable to hear me (after maybe a couple of calls/days after the reboot) , i did the hardware test again and certainly was different. A buzz at all times with my voice being completely muffled. Something to do with the noise cancellation mic i believe.
I have tried disabling OK Google Detection.
I have tried enabling call recording.
I have tried reseting factory settings , clear wipe partitions etc.
I have tried enabling dialer pad tones (Dont know why this was marked as a solution in some forums)
But all of the above was not a solution for me. Switching to loudspeaker works. And rebooting the phone (which is irritating during important calls) also works.
Any help would be nice.
Click to expand...
Click to collapse
Hi I too have this same issue. I believe it is a faulty model from Asus! I had serviced my mobile last month and the Subboard assembly has been completely changed by those people but still I face the same issue. . Hope I will throw away this bulsh**t soon. Asus not willing for replacement too I argued so many times which is just waste of time. Totally a waste of money and time.
Microphone issue
I am also having same problem once restarted phone is all fine...should i replace phone ??
Bought just 2 days back
Solution
Since you apply this solution the error has not returned to flicks: I cannot post the youtube link, but search the title: Solved: Asus Zenphone 2e mic problem by Jack Scorpion.
I have the same device with the same problem! It was neglible before, and it happened very rarely. But recently it had become worse and that thing happened to all the calls. Switching to loudspeaker works (loudspeaker mode disables the bottom mic and switches to top mic). I reset the device to factory settings (that thing wiped the internal memory too!) and since then, i haven't updated the 'ASUS Calling Screen' from the play store and everything works fine atleast till now.
hai friend try (ASUS ZenFone 2 Laser=ZE550KL (Z00L) software Image: 1.17.40.1234 for WW SKU only) this firmware from asus site or try system update form your mobile. thats old version runing firmware running on your mobile so thats a software problem. this a network issue in that old version asus team doing always best i am also have same problem in past month but my current update installed after working fine. so don worry friends
[email protected] said:
Its not about recording calls.. Its about the recipient not hearing me. The microphone is what is bothering me. I doubt the issue is with the noise cancellation of microphones. Perhaps cancelling more than noise.
When I reboot the phone, everything starts working normally. After a few calls the problem returns, the recipient not hearing me!.
The temporary fix for me is switching to loud speaker. I dont know why, but the mic starts working when in loud speaker. The moment i switch it back to handson, the recipient is again not able to hear me.
Read a few forums in zentalk reporting the same issue
www(dot)asus.com/zentalk/forum.php?mod=viewthread&tid=14486
I am seriously hoping it is a software bug which would be fixed in the next update or so.
I tried the hardware test which behaves differently when the problem occurs and when it is problem free.
The hardware test is perfect if i test the mic just after reboot and when everything is normal.
But once i find out that the recipient is unable to hear me (after maybe a couple of calls/days after the reboot) , i did the hardware test again and certainly was different. A buzz at all times with my voice being completely muffled. Something to do with the noise cancellation mic i believe.
I have tried disabling OK Google Detection.
I have tried enabling call recording.
I have tried reseting factory settings , clear wipe partitions etc.
I have tried enabling dialer pad tones (Dont know why this was marked as a solution in some forums)
But all of the above was not a solution for me. Switching to loudspeaker works. And rebooting the phone (which is irritating during important calls) also works.
Any help would be nice.
Click to expand...
Click to collapse
Try disabling Audio Wizard app
I am also facing same problem. Suddenly the mic of my asus fails to work.
Solution
There is solution. Please post it on another forums after you will check it.
Just hold your phone in your hand in position, which will make sound to reflect directly into your voice microphone. This way you will make a difference in signal between voice and noise cancellation microphone. That's how voice cancellation technology works. I have got this result after one week of search for any effective solution. And did not find any useful info. So I have find a solution after some experiments.
Please post it to another forums if it will solve your problem.