U8800-51 AT&T Impulse locked to at&t ... after unlock try to change language to arabic by flashed arabic rom ... (U8800H V100R001AREC00B135SP01 CUSTC213D001(Kuwait VIVA) all went ok .. but after finished update procedure ... phone not power on any more .. only vibration .. also no pink lcd when press volume + & - & power .. any chance to fix it ... thanx
habeebo said:
U8800-51 AT&T Impulse locked to at&t ... after unlock try to change language to arabic by flashed arabic rom ... (U8800H V100R001AREC00B135SP01 CUSTC213D001(Kuwait VIVA) all went ok .. but after finished update procedure ... phone not power on any more .. only vibration .. also no pink lcd when press volume + & - & power .. any chance to fix it ... thanx
Click to expand...
Click to collapse
you bricked your u8800-51 because you flashed a ROM for the "u8800H" (this is a variant from u8800, designed for Hong Kong)
send it to warranty.. :nothing to do here:
Only chance to save your phone may be to go to gingerbread 2.3 If it updates that its. http://forum.xda-developers.com/showthread.php?t=1844442
Somcom3X said:
Only chance to save your phone may be to go to gingerbread 2.3 If it updates that its. http://forum.xda-developers.com/showthread.php?t=1844442
Click to expand...
Click to collapse
thanx in advance i used 0.a DiskImage_1_6_WinAll_Setup to flash the phone which in disc G as appear on my pc but its stop flashing image at 6.77% many time .. sorry to make u carry on ...... i need more help .... here the pictures
habeebo said:
thanx in advance i used 0.a DiskImage_1_6_WinAll_Setup to flash the phone which in disc G as appear on my pc but its stop flashing image at 6.77% many time .. sorry to make u carry on ...... i need more help .... here the pictures
Click to expand...
Click to collapse
"Driver G (256MB)"??.. ERROR...
partition need to say "3.69Gb"...
zchuxz3x said:
"Driver G (256MB)"??.. ERROR...
partition need to say "3.69Gb"...
Click to expand...
Click to collapse
You need to download lock dismount and lock the 3.69gb one in and write over that.
Sent from my U8800-51 using xda premium
Somcom3X said:
You need to download lock dismount and lock the 3.69gb one in and write over that.
Sent from my U8800-51 using xda premium
Click to expand...
Click to collapse
really very thanks to you and all other memeber ... its alive again ... thank :laugh:you
habeebo said:
really very thanks to you and all other memeber ... its alive again ... thank :laugh:you
Click to expand...
Click to collapse
Glad it works
Sent from my U8800-51 using xda premium
Hi, I have the same problem, how did you end up fixing it?
bearclaw92 said:
Hi, I have the same problem, how did you end up fixing it?
Click to expand...
Click to collapse
Depending on the device flash the stock rom
Sent from my Desire HD using xda premium
Okay, Do i need to do this through the pink or blue screen? I cant seem to get either to work. I have recovered from blue before, that was easy enough. The device only seems to vibrate, softkeys light and the notification led blinks red. In device manager it only shows up as usb device
bearclaw92 said:
Okay, Do i need to do this through the pink or blue screen? I cant seem to get either to work. I have recovered from blue before, that was easy enough. The device only seems to vibrate, softkeys light and the notification led blinks red. In device manager it only shows up as usb device
Click to expand...
Click to collapse
Pinkscreen, attach USB, download lock dismount and disk img. Mount 3.69 gb and store image
Sent from my Desire HD using xda premium
Cannot get to pink screen ls-usb shows no devices in linux either, full fledged brick?
bearclaw92 said:
Cannot get to pink screen ls-usb shows no devices in linux either, full fledged brick?
Click to expand...
Click to collapse
Are you on stock? Maybe a locked.bootloader?
Sent from my Desire HD using xda premium
Related
Hi !
When I plug my off DHD on sector or USB, (really off, not "hibernate"), it starts on clockwork recovery... It's annoying ! Very !
What can I do ?
Thank you !
zepretender said:
Hi !
When I plug my off DHD on sector or USB, (really off, not "hibernate"), it starts on clockwork recovery... It's annoying ! Very !
What can I do ?
Thank you !
Click to expand...
Click to collapse
I had that on leedroids rom...changed rom and the problem was gone
Sent from my GT-I9000 using XDA App
rixsta said:
I had that on leedroids rom...changed rom and the problem was gone
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I've always had it but I'm fine with it, I might just remove Clockwork just to do the battery calibration.
Say rixta, what was wrong with your DHD screen?
How do you do ? I want to calibrate my battery tonight and I don't want recovery to spoil it ! Thank you !
zepretender said:
How do you do ? I want to calibrate my battery tonight and I don't want recovery to spoil it ! Thank you !
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=712990
Its the bolded part in the quote.
The trouble is... I can't turn my phone off because when its plugged (USB or sector), recovery mode is launching (and screen is on !)
zepretender said:
The trouble is... I can't turn my phone off because when its plugged (USB or sector), recovery mode is launching (and screen is on !)
Click to expand...
Click to collapse
It works fine don't worry, with original recovery the battery charge indicator was run from recovery hence when a custom recovery is flashed phone boots into recovery.
BTW this question has been asked many many times before please search before posting
Sorry... My english isn't perfect and searching in forum with technical langage is hard... a proove ? I don't understand what you meant !
Hello everyone. Im new to this site but i was wondering if anyone could help me.
My phone is the htc hd2 running cyanogenmod7 but a few weeks ago i cracked my screen. I replaced the screen and it loaded fine. But the next day i turned my phone on and its stuck at the GO! GO! GO! PLEASE HELP ME!!! Ohh and i cant do anything with the volume buttons cuz they dont work.
I think you should do a task 29 and then install clk. You need to use clk1.4.0.1 I have written an easy to use guide for it. Once clk is installed though quit following the guide because you need to flash team win recovery project(twrp) instead of cwm. Twrp is completely touch recovery.
Sent from my HD2 using xda premium
b3vw97 said:
Hello everyone. Im new to this site but i was wondering if anyone could help me.
My phone is the htc hd2 running cyanogenmod7 but a few weeks ago i cracked my screen. I replaced the screen and it loaded fine. But the next day i turned my phone on and its stuck at the GO! GO! GO! PLEASE HELP ME!!! Ohh and i cant do anything with the volume buttons cuz they dont work.
Click to expand...
Click to collapse
kylew1212 said:
I think you should do a task 29 and then install clk. You need to use clk1.4.0.1 I have written an easy to use guide for it. Once clk is installed though quit following the guide because you need to flash team win recovery project(twrp) instead of cwm. Twrp is completely touch recovery.
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Did you read that his VOLUME BUTTONS dont work ?
Most likely you have to fix buttons first mate.
Cjovecje! said:
Did you read that his VOLUME BUTTONS dont work ?
Most likely you have to fix buttons first mate.
Click to expand...
Click to collapse
Yes I did read that his volume buttons don't work. I just forgot a crucial step :/
Sent from my HD2 using xda premium
If your phone can not enter the “FourColor DISPLAY” while you hold on Volume DOWN when you turn on the phone。I think the problem could be on HARDWARE
Hello everyone , I wanna ask if you guys can help me please with my problem that im having . I was playing a game and all of a sudden the phone froze and make a buzzing sound so i pulled out the battery and put it back it and then it turned on and got stuck on my splash screen with white lines and i cant do anything , can you guys please try to help me ! Thank You.
View attachment 1084897
ramazan7 said:
Hello everyone , I wanna ask if you guys can help me please with my problem that im having . I was playing a game and all of a sudden the phone froze and make a buzzing sound so i pulled out the battery and put it back it and then it turned on and got stuck on my splash screen with white lines and i cant do anything , can you guys please try to help me ! Thank You.
View attachment 1084897
Click to expand...
Click to collapse
Can you boot into bootloader. Hold volume down button while turning phone on.
adil1508 said:
Can you boot into bootloader. Hold volume down button while turning phone on.
Click to expand...
Click to collapse
Yess i can get into bootloader
ramazan7 said:
Yess i can get into bootloader
Click to expand...
Click to collapse
Try running task29 and flash MAGLDR and CWM all over again
Sent from my HD2 using XDA
adil1508 said:
Try running task29 and flash MAGLDR and CWM all over again
Sent from my HD2 using XDA
Click to expand...
Click to collapse
I tried that but evertime i do it i get the Error[270] , do you have any other opinions on what i can do ???
ramazan7 said:
I tried that but evertime i do it i get the Error[270] , do you have any other opinions on what i can do ???
Click to expand...
Click to collapse
Im really sorry but I've got nothing. Someone else will help i'm sure
Did you try to the reinstall the bootloader? it might help.
Mithrandix said:
Did you try to the reinstall the bootloader? it might help.
Click to expand...
Click to collapse
How do I reinstall the bootloader loader ?
Mithrandix said:
Did you try to the reinstall the bootloader? it might help.
Click to expand...
Click to collapse
If you are talking about the MAGLDR then he has tried it, and you cannot install the default bootloader
I try to install a rom from the Sd card and it installs but it wont start because of that screen!
ramazan7 said:
I try to install a rom from the Sd card and it installs but it wont start because of that screen!
Click to expand...
Click to collapse
If you can see the bootloader then you should install the original WM ROM either via Active sync/USB or over the sd card, follow link post #1 and go to point 3.
http://forum.xda-developers.com/showthread.php?t=609477
If you still have white lines..........then it seams to be a HW problem......
Cheers.....LinChina
LinChina said:
If you can see the bootloader then you should install the original WM ROM either via Active sync/USB or over the sd card, follow link post #1 and go to point 3.
http://forum.xda-developers.com/showthread.php?t=609477
If you still have white lines..........then it seams to be a HW problem......
Cheers.....LinChina
Click to expand...
Click to collapse
now my phone got bricked !
ramazan7 said:
now my phone got bricked !
Click to expand...
Click to collapse
Does it mean no more white lines..........but bricked!!!???
What happened??
Cheers.....LinChina
Sent from my HTC HD2 using XDA
LinChina said:
Does it mean no more white lines..........but bricked!!!???
What happened??
Cheers.....LinChina
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
it means why phone wont even turn on.
ramazan7 said:
it means why phone wont even turn on.
Click to expand...
Click to collapse
A buzzing sound followed by that? Must have been a hardware failure, there really isn't any other explanation. Does the same behaviour (striped screen) happen when in the bootloader? Have you considered that your phone may not be turning on simply because you've run it out of battery?
Nigeldg said:
A buzzing sound followed by that? Must have been a hardware failure, there really isn't any other explanation. Does the same behaviour (striped screen) happen when in the bootloader? Have you considered that your phone may not be turning on simply because you've run it out of battery?
Click to expand...
Click to collapse
no there are no stripped lines when its in bootloader and i have 2 different batteries i tried them both but still no positive results but right now my phone is fully bricked when i click the power button it wont even turn on
ramazan7 said:
no there are no stripped lines when its in bootloader and i have 2 different batteries i tried them both but still no positive results but right now my phone is fully bricked when i click the power button it wont even turn on
Click to expand...
Click to collapse
If it doesn't turn on nor bootloader I fear your phone has a major HW problem.
From your description it leads only to that conclusion.
I don't know where you live, as I'm currently in China and enough shops which can check the phone......I got also the touchscreen of my HD2 replaced.
Sorry no better idea how to get your HD2 back to life.
Cheers.....LinChina
What is HW problem ?
From reading the thread posts, it seems you are having a MOBO (motherboard/mainboard) failure. And HW=Hardware as in physical pieces of the device. You might wanna try buying a mobo from somewhere ( i get my stuff from ebay) and try replacing the mobo. A main board averages around 50 bucks. Or you could buy my HD2 from me lol
elesbb said:
From reading the thread posts, it seems you are having a MOBO (motherboard/mainboard) failure. And HW=Hardware as in physical pieces of the device. You might wanna try buying a mobo from somewhere ( i get my stuff from ebay) and try replacing the mobo. A main board averages around 50 bucks. Or you could buy my HD2 from me lol
Click to expand...
Click to collapse
YOU WILL NOT SELL YOUR HD2
Hi guys im new here as u can see
I recently had flash my phone with samsung galaxy y not pro duos GT-B5512 firmware and now my cell is stuck in white screen and i can switch it on and can understand that its on coz i can hear login/boot sound but i cannot see anything.
and my volume keys too are change and im using from keyboard
the problem is i dont know how to flash it back since i cannot see boot menu
and the worst problem is my pc does not recognise my device any more a and i cannot get the wright port for flashing
CCould anyone be generous to kindly suggest me what should i try and do with it
Please XDA-DEVELOPERS i know u guys are really good Pleaseeeeeeeeeee
The main thing I need to know is whether the phone is turning on or not?. If u can see anything on ur screen(even a blank one) then it means its booting
Press thanks if it helps
hell_lock said:
The main thing I need to know is whether the phone is turning on or not?. If u can see anything on ur screen(even a blank one) then it means its booting
Press thanks if it helps
Click to expand...
Click to collapse
firstly thanks for the reply
Yes sir i can switch it on But cannot see anything coz its of the screen
and im sure its on coz i can hear the sound
but im trying to get to boot menu and i just can remember any thing so im stuck
web_lover said:
firstly thanks for the reply
Yes sir i can switch it on But cannot see anything coz its of the screen
and im sure its on coz i can hear the sound
but im trying to get to boot menu and i just can remember any thing so im stuck
Click to expand...
Click to collapse
Recovery mode and download mode accessible?
Press thanks if it helps
hell_lock said:
Recovery mode and download mode accessible?
Click to expand...
Click to collapse
Sir i cannot see and plus mine is galaxy y pro duos (gt -b5512) my volume keys too are change with my keypads not anymore with volume rocker
and i think i can get into it but how can i reflash it where would i need to click to make it in download mode
web_lover said:
Sir i cannot see and plus mine is galaxy y pro duos (gt -b5512) my volume keys too are change with my keypads not anymore with volume rocker
and i think i can get into it but how can i reflash it where would i need to click to make it in download mode
Click to expand...
Click to collapse
If u dont figure out a way to open any of the modes then unfortunately you will have to give your phone for repairing. Or maybe make a usb jig..
Press thanks if it helps
how do i get it in download mode
Will i be able to flash in just the boot menu or do i need to click sumthing there like install or sumthing
But please clarify to me how to download/install new firmware in the mobile
Now im stuck in Setup connection
Try any other usb port or usb cable
Press thanks if it helps
SOLVED
Woooohoooooo Flashed it and now its working after many tries Damn i love XDA-developers
and this is what i did i first change the port but not working then i took out the cable and plug it back and saw that the port was change to default and i was surprise and then i hit start
and Wooooooo it started with any problem
Thanks Dude
but one thing dude i cannot get on boot menu
|If i do there there's two option ie., up volume to download and down volume to reboot
i cannot see anymore wife cache and factory reset and update
but will try to fix this too soon
wht did u actually do can u explain????
Explain your problem neatly
Sent from my GT-S5360 using xda premium
sunamit37 said:
Explain your problem neatly
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
white screen nothing else i ve installed galaxy ystock rom on galaxy y pro duos????help me
Flash back to stock ROM using ODIN, that should solve your issue.
Dyde he said he installed Galaxy Y stock rom on Galaxy Y Pro Duos
Sana d n lng sya nag EXIST :|
Ang Hininga Nya Amoy panis
Ang Kanyang Nguso ay Tagilid :S
Ang Mukha parang na FLYING KICK B)
jasonxD said:
Dyde he said he installed Galaxy Y stock rom on Galaxy Y Pro Duos
Sana d n lng sya nag EXIST :|
Ang Hininga Nya Amoy panis
Ang Kanyang Nguso ay Tagilid :S
Ang Mukha parang na FLYING KICK B)
Click to expand...
Click to collapse
can u help m not able to go to recovery nd download mode??????
Try this guide :
http://forum.xda-developers.com/showthread.php?t=1835947
nikufellow said:
Try this guide :
http://forum.xda-developers.com/showthread.php?t=1835947
Click to expand...
Click to collapse
but m not able to go to download mode!!!!what to do???
percy215 said:
but m not able to go to download mode!!!!what to do???
Click to expand...
Click to collapse
I wrote you in other thread you created in dev section.. which will come here shortly
So see that thread..
Sent from the MUST have app!
How did u do it ?
Hi i am having the same problem now its keep on restart how did u solve this please explain
web_lover said:
Hi guys im new here as u can see
I recently had flash my phone with samsung galaxy y not pro duos GT-B5512 firmware and now my cell is stuck in white screen and i can switch it on and can understand that its on coz i can hear login/boot sound but i cannot see anything.
and my volume keys too are change and im using from keyboard
the problem is i dont know how to flash it back since i cannot see boot menu
and the worst problem is my pc does not recognise my device any more a and i cannot get the wright port for flashing
CCould anyone be generous to kindly suggest me what should i try and do with it
Please XDA-DEVELOPERS i know u guys are really good Pleaseeeeeeeeeee
Click to expand...
Click to collapse
Bricket my tablet, how to get into recovery mode how to please me ..
what should i take it to service center??
sorry my bad english, I'm from Indonesia
please help me..
Why don'tyou give us more information? .. In what way is broken. We have more way to recover depends on what is broken. You can always flash a stock firmware and have your tablet at factory status.
Sent from my GT-N7100
goodoane said:
Why don'tyou give us more information? .. In what way is broken. We have more way to recover depends on what is broken. You can always flash a stock firmware and have your tablet at factory status.
Sent from my GT-N7100
Click to expand...
Click to collapse
at first i install its tablet customrom CM10 paranoid, and I'm trying to compile the script cameranya, when completed and I rebooted, suddenly bootloop I do not know the combination to the recovery and cwm.
thank's
sorry my bad english
I've been doing it this way but the result is the same still can not work
link : http://forum.xda-developers.com/showthread.php?t=1043349
menu + green key + power is for fat7 or search for QtADB install in windows and under tools you can boot in recovery if tablet is seen on your PC.
Sent from my S7
My tablet ideos s7 slim not ideos s7..
BANOUNDROID said:
My tablet ideos s7 slim not ideos s7..
Click to expand...
Click to collapse
I see... you wanted to compile something for the tablet, but you do not know the basics how to get out of trouble..?? alright!
JotaMG said:
I see... you wanted to compile something for the tablet, but you do not know the basics how to get out of trouble..?? alright!
Click to expand...
Click to collapse
yes indeed I try to compile a script for my slim Ideos S7 tablet, and is there a way out other than taken to the service center ..:crying::crying:
BANOUNDROID said:
Bricket my tablet, how to get into recovery mode how to please me ..
what should i take it to service center??
sorry my bad english, I'm from Indonesia
Click to expand...
Click to collapse
This is what I did when I bricked.
http://bijopaul.blogspot.in/2011/12/bricking-and-unbricking-my-ideos-s7.html
It is OK if you have no time to hit thanks button
Sent from my Nexus 4 using xda app-developers app
ddz334 said:
This is what I did when I bricked.
http://bijopaul.blogspot.in/2011/12/bricking-and-unbricking-my-ideos-s7.html
It is OK if you have no time to hit thanks button
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
That way I have done but still failed.. is there another way, besides brought to the service center ..
BANOUNDROID said:
That way I have done but still failed.. is there another way, besides brought to the service center ..
Click to expand...
Click to collapse
Have you searched around on android tablets forum. They have more content on slim one. I am 90% sure you can solve this problem yourself as long as there is no hardware error.
It's OK if you have no time to hit thanks button
Sent from my Nexus 4 using xda app-developers app
ok I will try again to learn step by step ..
thanks for the help
friend my tablet bricked..
help please..