[RECOVERY] clockworkmod v6.0.1.7 - Nexus 10 Q&A, Help & Troubleshooting

I don't know how I got v6.0.1.7 I went into rom manager and selected flash clockwork after I had 6.0.1.6 installed, it installed this one. then selected boot into recovery to see if it would reboot because 6.0.1.6 would just give me the dead android. It rebooted fine and takes me into cwm but I can't select anything with the power button. I can use the volume rocker to move about but I can't select anything. if I hold the power button it reboots but just takes me back into cwm. The device doesn't show up with fastboot or adb, if I hold power button and volume rocker when I reboot it takes me into the regular bootloader but I can't move about and when I told the power button from there it just takes me back into cwm. Please I am stuck, how do I get out of it?

crookedpriority said:
I don't know how I got v6.0.1.7 I went into rom manager and selected flash clockwork after I had 6.0.1.6 installed, it installed this one. then selected boot into recovery to see if it would reboot because 6.0.1.6 would just give me the dead android. It rebooted fine and takes me into cwm but I can't select anything with the power button. I can use the volume rocker to move about but I can't select anything. if I hold the power button it reboots but just takes me back into cwm. The device doesn't show up with fastboot or adb, if I hold power button and volume rocker when I reboot it takes me into the regular bootloader but I can't move about and when I told the power button from there it just takes me back into cwm. Please I am stuck, how do I get out of it?
Click to expand...
Click to collapse
Can't vouch for the above, but I can say that Koush has now updated to 6.0.1.8, available here:
http://clockworkmod.com/rommanager
And I just flashed it and it seems to be functioning very nicely. :good:

I was able to get out of it. With it hooked to windows it came up as unknown device and it wouldn't recognize the drivers in the sdk pack. so I went to my mac, into terminal and did a adb reboot and it booted fine. I went into rom manager and downloaded 1.8 and rebooted into recovery. Same thing, the power button doesn't do anything.

crookedpriority said:
I was able to get out of it. With it hooked to windows it came up as unknown device and it wouldn't recognize the drivers in the sdk pack. so I went to my mac, into terminal and did a adb reboot and it booted fine. I went into rom manager and downloaded 1.8 and rebooted into recovery. Same thing, the power button doesn't do anything.
Click to expand...
Click to collapse
Wrong section, needs to be in Q&A's. Plus the title is misleading.

Related

How to boot into recovery without adb

I noticed a lot of people having trouble booting into recovery mode from the phone. This is how to do it. With the phone turned off hold the power button +vol down button until you see the "Vibrant" logo on the screen. Once you see the logo, take your finger off the power button but keep pressing the vol down untill you see the recovery image. Ive tried every other way that people have posted and this is the only way I could get it to work. Sorry if this is already posted somewhere else but I couldnt find it. Hope this helps.
Open terminal emulator
Code:
su
reboot recovery
....Or are you not rooted yet?
And you have to hold its BOTH volume buttons not just volume down to boot into recovery.
- Hold both volume buttons
- Press power button
- When vibrant comes up, let go of power but continue to hold the two volume buttons
- Bam Recovery
I always let go of all the buttons when the Vibrant logo comes up, and it goes to recovery just fine.
Mr_Tricorder said:
I always let go of all the buttons when the Vibrant logo comes up, and it goes to recovery just fine.
Click to expand...
Click to collapse
I can second this. I am my own little vulcan deathgrip to press them all at the same time though, and still be able to release without dropping the phone.
You could also download quick reboot from the market for those already rooted, it has an option to reboot into recovery.
Sent via my Vibrant with Tapatalk Pro
ju5tiiv said:
You could also download quick reboot from the market for those already rooted, it has an option to reboot into recovery.
Click to expand...
Click to collapse
This ... or use the Reboot Into Recovery option from the Clockwork ROM Manager, which I would expect most Vibrant users to have right now if they're rooted.
What if none of this works?
I've a Vibrant (one week old) rooted. Clockwork installed KiNgxKernel-Vib-3-2.6.29.6 etc. However unless I use clockwork I can't get into recovery mode. Would really like to know a working key press combo if possible.
I read somewhere about some Vibrants being hardware locked. Assuming this is true perhaps that's what this phone is.

[Q] how to get into recovery mode on D2

I am trying to do an nandroid back up. The instructions say to power off, then hold the "Home Key" and the power button untill you see the triangle.
I am holding the picture of a house next to the menu key. Is that the correct key?
My unit just turns on normally even if I am holding mentioned key, which is the wrong key cause it should not have power until the phone is on and unlocked.
Thanks for help.
chrstdvd said:
I am trying to do an nandroid back up. The instructions say to power off, then hold the "Home Key" and the power button untill you see the triangle.
I am holding the picture of a house next to the menu key. Is that the correct key?
My unit just turns on normally even if I am holding mentioned key, which is the wrong key cause it should not have power until the phone is on and unlocked.
Thanks for help.
Click to expand...
Click to collapse
On the Droid 2 you have to go through a different way.
1. Make sure you have Koush's bootstrap app for the Droid 2.
2. Make sure you are bootstrapped via Koush's app.
3. Reboot to recovery through Koush's app.
You navigate menus with the volume buttons. You select with the camera button, and you go back with the power/lock button.
you can also utilize the keyboard arrows, use ok to select and delete to back up.
facelessuser said:
On the Droid 2 you have to go through a different way.
1. Make sure you have Koush's bootstrap app for the Droid 2.
2. Make sure you are bootstrapped via Koush's app.
3. Reboot to recovery through Koush's app.
You navigate menus with the volume buttons. You select with the camera button, and you go back with the power/lock button.
Click to expand...
Click to collapse
Ok, got it from the Market and it installed. I started it and did not know what to do, so I hit the first button, then the second button, then went to Backup/Restore and chose backup.
It is working as i type this.
Thank you so much
yes you would select backup. Once you do this it will backup to you backup folder on your sdcard. If you were to need to go back, you would utilize the restore option and select whichever backup you wanted to use.
if your phone is boot looping or anything to get into recovery:
-start up phone
-let the phone go to the bootscreen (the droid eye screen after the M logo)
-pull the battery out while in the bootscreen
-after a few seconds replace battery and boot up phone
-phone will boot into clockwork recovery
jerseyh22accord said:
if your phone is boot looping or anything to get into recovery:
-start up phone
-let the phone go to the bootscreen (the droid eye screen after the M logo)
-pull the battery out while in the bootscreen
-after a few seconds replace battery and boot up phone
-phone will boot into clockwork recovery
Click to expand...
Click to collapse
Good advice. I believe there is a flag that gets set when you shut down the phone, and it only gets reset when you successfully boot. That way, if you boot loop, when you try to boot again it goes to recovery.
This also manifests itself sometimes when you flash a rom. Everytime you boot, it first goes into clockwork recovery, which is annoying, but fixable. This problem occurs because you need to bootstrap again which allows the flag to get reset when the OS loads.
only bootlooping when connected USB
I dont know what happened I simply had my phone attached to my pc in USB mode (after transferring music to the sd card via "media sync") and when I switched to 'charge only' and attached my head phones, my phone went into a boot loop. i unplugged USB cord and bootloop stopped... anyone run into this at all? kinda frustrating since now i apparently can now longer attach to my pc.
any help would be greatly appreciated
win xp
OTA stock 2.2
rooted w/bootstrap installed
i already attempted recovery
<<<<>>>>>
update
apparently it was a problem w/my pc! it was giving me problems disconecting or even accessing my portable hdd as well.
so: Problem Solved

[Solved-Q] Must be a moron, but I just can't get vol+/power-button to CWM-R to work

This is a painful message to write, but I am desparate. This should be so simple!
Have a U8800 standard (at least it says only "U8800" in settings/about phone.
What have I done:
- Upgraded some time ago to 2.3.5 Rev B522 from Huawei.
- Then rooted it with SuperOneClick.
- Installed ClockWorkMod from Play Store.
- Downloaded CWM Recovery 5.5.0.4 stable from xda and placed the file into the /.cust-backup/image folder via Remount.
- Turned off Fast boot under settings/applications
:: What worked/happened.
- Rooting went fine, ES file explorer and others get root-permissions ok.
- But got into CWMRecovery only via CWM program (Choosing "Reboot into recovery"). Never with the holding buttons vol+ and power-button during power-on.
Figured it was that locked bootloader on B522 that was the problem.
What I did:
- Followed the instructions in http://forum.xda-developers.com/showthread.php?t=1457490 (Get your pink screen back).
- In CWM Recovery flashed "update-B518-bootloader.zip".
- Got "ok installed or something to that effect" from CWM Recovery.
:: What worked/happened.
- Still could not get into CWMRecovery via button-holding. Tried reflashing the B518 bootloader a few times, but just no difference.
Read somewhere that each Huawei firmware-release comes with it's own bootloader, so lets try to install Huawei B518.
- Only place I could find the image was here http://huaweiideosx5.blogspot.no/2012/03/u8800-b518-23-software.html
- U8800V100R001C00B518G001.zip
- Had to take out the external SD-card to get the /sdcard/dload directory on the internal SD-card.
-Seems to be important to have dload on the internal SD-card and not the external.
- Booting the phone with vol+, vol-, power did not start the downgrade, but was able to trigger it via settings/storage/software upgrade.
After downgrade to B518 (Checked version in settings/about phone):
- Deleted /sdcard/dload directory.
- Rooted with SuperOneClick
- Installed ClockWorkMod from play store again.
- Put CWM Recovery 5.5.0.4 into ./cust_backup/image again (think this was unecessary. I think it was already there but did it anyways)
- Turned off Fast boot under settings/applications.
:: What worked/happened.
- The phone is now in B518 software, but still can not get into CWM Recovery via keypressing at boot.
I hold the vol+ and power-buttons all the way to "desktop" so to say, but can not for the life of me get into CWM Recovery that way. Getting into CWM recovery 5.5.0.4 via instructing CWM application to boot into recovery works fine, though.
I am drooling at the thought of ICS Aurora, but I don't dare before I can reliably get into CWM Recovery via keypress.
Sorry if this is very stupid post, but I have tried so much.
Maybe the volume buttons are faulty? Turn off the phone and try this: hold down volume up; while holding press power button as long as the logo comes up. Release power button but continue holding volume up. If it did not work, try doing same with volume down.
Yeah, do what Blefish advised you but do it while the phone is off and charging. I have a kinda broken power key and with this 'trick' it boots faster and more reliable. Keep holding the 3 buttons until you see the recovery.
Sent from my U8800
Thank you both for trying to help me here!
Unfortunately I have had no luck with your suggestions.
Re: Broken keys.
Power and volume-buttons seems to work well when the phone is on. Also when I boot into recovery through the CWM program, navigate to advanced/key-test, the vol+, vol- and power button seems to work well there too.
On pressing the power-button, CWM-R reports Key: 116
On pressing the vol+-button, CWM-R reports Key: 115
On pressing the vol--button, CWM-R reports Key: 114
So I think the keys must be ok, right?
Blefish: I did what you suggested, as I understood it.
When the phone boots, there are three stages of logos.
1. A static logo of Huawei's red "fan?".
2. A short "comet" animation.
3. An animated logo of Huawei's "fan", where some highlight flashes from left to right over the fan.
I hold the power-button in until I see the first static logo, then let go of the power-button and hold the volume-key(s).
Is this the same stage in the boot-process that you were thinking of?
I have tried vol+, vol- and both vol+ and vol-, together with releasing the power-button at that point.
Have not had any success with that, and ended on the "desktop" each time.
AceDroidX: I tried your suggestion as well.
I did this:
1. Shut down the telephone
2. Plugged in the power.
3. A "fan"-logo appears which is replaced by an animated battery.
4. Upon seeing the animated battery, I tried the various key-hold variants.
- vol+ and power : Ended up at desktop.
- vol- and power : Ended up at desktop.
- vol+ and vol- and power : Ended up at desktop.
So not much success either.
I am out of ideas... Can it be that B522 bootloader that still lingers in there, not replaced by installing the B518 software?
Well, idk what else to suggest.. Maybe your problem is here?
Downloaded CWM Recovery 5.5.0.4 stable from xda and placed the file into the /.cust-backup/image folder via Remount.
Click to expand...
Click to collapse
I remember that when i mount my phone in linux, there was a partition with just the image folder. Some files like boot.img and recovery.img where there. Try to put the recovery image in there and see if it makes any difference.
I'd like see your versioninfo, can you upload a screenshot?
You can check mine from B528
AceDroidX: When I use Remount, I am able to mount that partition as read/write so that I can copy CWM's Recovery image in there. I think it is identical as mounting it up remotely, as you do. I am after all able to boot into CWM-Recovery, just not by key-pressing? I suppose I could boot into Linux and try to mount up the partitions as you do.
Hi kilroystyx: I can not figure out where to find a similar-looking page as the one you have in your picture.
I have the settings/about phone, if that is an older version of what you have there?
Treq01 said:
Hi kilroystyx: I can not figure out where to find a similar-looking page as the one you have in your picture.
I have the settings/about phone, if that is an older version of what you have there?
Click to expand...
Click to collapse
You have to dial *#*#2846579#*#*
Off.. I completely forgot about that place!
Here are the right screenshots.
What can you see from this?
Treq01 said:
Off.. I completely forgot about that place!
Here are the right screenshots.
What can you see from this?
Click to expand...
Click to collapse
Based on the screenshots your installation is fine.
Just one last shoot based on what AceDroidX says, with phone off press Vol+ and hold then connect USB cable to PC or charger and stay holding Vol+ then wait...wait and what you see?
hi all,
i'm using some ics roms and it seems ics supports natively vol++power button to take screenshots but it doesnt work for me... do you know if there are some custom ics rom where it will work?
thank you
Wow.. It is hard to believe.. but I have actually ... eventually found a way to get into that CWM-Recovery every time.
It is a combination of your suggestions.
I have been doing variations, trying to figure something out and eventually there is a method.
What I must do, on this phone, in order to get into CWM-R is this:
1. If the charging cable is in, then unplug first.
2. Turn the phone off.
3. Take out the battery and put it back in.
- This makes a difference on my phone, at least. I am not able to get into CWM-R wihtout taking the battery out first.
4. Press and hold Vol+
5. With Vol+ being pressed continously, insert the charging-cable.
6. Wait for the Fan-animation to finish and the "battery-charging" animation to start.
7. When the battery-charging animation is running and the screen eventually goes black, keep holding the Vol+ button for some time.
- Sometimes it works to keep holding the Vol+ button for only a second or two. Sometimes I must hold it up to 30 seconds.
7. Press and hold the power-button in addition to the Vol+
8. Wait for CWM-Recovery to start.
Thank you very much for your help.
Now I think I can try for ICS!
imsonica said:
hi all,
i'm using some ics roms and it seems ics supports natively vol++power button to take screenshots but it doesnt work for me... do you know if there are some custom ics rom where it will work?
thank you
Click to expand...
Click to collapse
Try Vol- and Power ON

Can't get into recovery mode

Here's my problem.
I can't get into recovery by pressing the power up, home, power buttons. It says it's 'entering recovery', but then it gives another 'buzz' (like when the phone starts), and just reboots normally.
I used to be able to get into recovery with ROMManager, by selecting the 'boot into recovery'. Then I just got into my CWM and could do whatever I wanted. Now I can't do that anymore, probably because my device is not rooted atm (got CM12 on it though). I wanted to root it, but I can't get into recovery.
I already tried flashing TWRP with Odin (download mode does work), but that doesn't work either. I obviously searched google and XDA for the problem, and I saw suggestions for other phones, like updating the bootloader. But I can't find any information or files for updating the bootloader.
sebas156 said:
Here's my problem.
I can't get into recovery by pressing the power up, home, power buttons. It says it's 'entering recovery', but then it gives another 'buzz' (like when the phone starts), and just reboots normally.
I used to be able to get into recovery with ROMManager, by selecting the 'boot into recovery'. Then I just got into my CWM and could do whatever I wanted. Now I can't do that anymore, probably because my device is not rooted atm (got CM12 on it though). I wanted to root it, but I can't get into recovery.
I already tried flashing TWRP with Odin (download mode does work), but that doesn't work either. I obviously searched google and XDA for the problem, and I saw suggestions for other phones, like updating the bootloader. But I can't find any information or files for updating the bootloader.
Click to expand...
Click to collapse
Reboots trying to go custom recovery are normal sometimes.
Lil guide for enter custom recovery (TWRP):
1. Power off your device completely.
2. Press and hold Volume Up, Home and Power buttons simultaneously.
3. Release only the Power button when the logo of Samsung in white appears (you will see little letters in blue and red on the top left of the screen).
4. You will see the blue logo of TWRP (pic attached) then and you can release all buttons and start to navigate for the custom recovery.
Joku1981 said:
Reboots trying to go custom recovery are normal sometimes.
Lil guide for enter custom recovery (TWRP):
1. Power off your device completely.
2. Press and hold Volume Up, Home and Power buttons simultaneously.
3. Release only the Power button when the logo of Samsung in white appears (you will see little letters in blue and red on the top left of the screen).
4. You will see the blue logo of TWRP (pic attached) then and you can release all buttons and start to navigate for the custom recovery.
Click to expand...
Click to collapse
Thanks for the reply, but I don't think you understood my question. I know how to get into recovery when it all works. I've done it many times before. The problem is that it shuts down while booting into recovery, and then just reboots normally.
I only installed TWRP because CWM wouldn't work, but TWRP doesn't either. So I guess it has to do with how the device boots into recovery, regardless of what the recovery is.
Anyone? I kinda want to flash another ROM, but I'm unable to right now.
sebas156 said:
Anyone? I kinda want to flash another ROM, but I'm unable to right now.
Click to expand...
Click to collapse
hi
Check your power button.....it happened before , a defective power botton will make it hard to enter recovery or download mode
MAX 404 said:
hi
Check your power button.....it happened before , a defective power botton will make it hard to enter recovery or download mode
Click to expand...
Click to collapse
I don't think that's the problem. I have 0 issues with the power button. Also, when I try to boot into recovery, it actually says it's 'starting recovery'. Then it stops with a buzz and reboots.
sebas156 said:
I don't think that's the problem. I have 0 issues with the power button. Also, when I try to boot into recovery, it actually says it's 'starting recovery'. Then it stops with a buzz and reboots.
Click to expand...
Click to collapse
may be one of the other push buttons.....
try to get into recovery with out pressing the power button and see if is possible...if so then the problem is coming from there.

Recovery in Chinese

Hi all,
Got this phone last week. It's been really laggy and basically unusable, it even lags when receiving calls and I miss half of them from being unable to answer. I was advised to wipe the cache partition, but the recovery menu is in Chinese. I got in touch with Motorola support who first tried to get me to delete all my data in the Chinese recovery menu, then gave me instructions to wipe the partition in English which I can't follow because the menu is in Chinese, and then said they couldn't help further. I can't find any other examples of Motorola phones with a Chinese recovery menu online.
Really not sure what to do!
Thanks for reading.
When I pressed power+volume down, phone booted into some Chinese screen, but it was not recovery, it was I think a testing menu. You might have pressed the same buttons. To boot to recovery, press power+volume up, this will launch a menu, keep pressing volume up to select recovery, then press volume down to launch recovery, after launching recovery you'll see no command screen, there you should hold power button and press volume up, this will launch recovery. Hope it helps.
That worked, thank you! Motorola were less than useless. Much appreciated.
In case it helps anyone, I fixed the lagging today by installing a new version of google play services, which I found by googling. Made everything better.
Please confirm which version of Google Play services you installed as I have the same problem.
Aman301582 said:
When I pressed power+volume down, phone booted into some Chinese screen, but it was not recovery, it was I think a testing menu. You might have pressed the same buttons. To boot to recovery, press power+volume up, this will launch a menu, keep pressing volume up to select recovery, then press volume down to launch recovery, after launching recovery you'll see no command screen, there you should hold power button and press volume up, this will launch recovery. Hope it helps.
Click to expand...
Click to collapse
This wont work for me it will just restart the phone back to where you can choice fastboot, recovery and normal.. ****ing annoying.... Got the bot with no command text under and press power button and volum up frustrating. Even worse when someone els got it to work so it should be working.
wackyleaks said:
This wont work for me it will just restart the phone back to where you can choice fastboot, recovery and normal.. ****ing annoying.... Got the bot with no command text under and press power button and volum up frustrating. Even worse when someone els got it to work so it should be working.
Click to expand...
Click to collapse
You have to hold Power button and tap volume up. Don't press both buttons simultaneously, hold Power, while holding Power tap volume up. If it does not work, then a system update might have changed the process (though highly unlikely I think).
Aman301582 said:
You have to hold Power button and tap volume up. Don't press both buttons simultaneously, hold Power, while holding Power tap volume up. If it does not work, then a system update might have changed the process (though highly unlikely I think).
Click to expand...
Click to collapse
Iv managed to installl twrp but in the processes I dont know how only used fastboot format userdata and installed recovery. Rebooted the phone and it stuck it got no internal memory... So its totally wiped now its a xt1706 belive thats the E3 Power cant find any roms for it.
wackyleaks said:
Iv managed to installl twrp but in the processes I dont know how only used fastboot format userdata and installed recovery. Rebooted the phone and it stuck it got no internal memory... So its totally wiped now its a xt1706 belive thats the E3 Power cant find any roms for it.
Click to expand...
Click to collapse
Stock images for e3 Power are available somewhere in the forum. Try flashing stock images. By the way there is no need to format userdata while flashing recovery.
Okay i managed to figure it out spent 5 houres or so had to use SP_Flash_TooL and some USB VCOM drivers for phone this can only be used on MTK chips.
trust me i just saw this post every google search is saying stuff about pressing volume down like it works XDA developers are life and life savers been using this since like 8 years ago and it still going strong had to leave my first comment
My huawei y511-u30 mobile is showing chineese in recovery mode and its not working also. As i want to flash my rom unable to get device detected by pc also

Categories

Resources