I unlocked my bootloader, was successful in doing that. However now my nexus wont boot, and I get a red triangle every time I try to enter recovery. I downloaded the original 4.2 files, could not get the CMD to work for flashing them so I double clicked the 'flash-all' and it flashed everything. It was successful, but now I am still getting the red triangle for recovery and cannot factory reset.
Does anyone have any ideas? Thank you very much for your help!
Everytime I try to flash it it gives me a message at first: 'Archive does not contain boot.sig, recovery.sig, and system.sig'. Clearly they are in my folder both zipped and unzipped, and everything gets a big 'OKAY'. Any ideas on what I am doing wrong?
Edit: Nevermind, turns out I just didn't know how to use the nexus recovery..pressing the power button brought up the recovery menu..gonna try a factory reset now..
IT WORKS! Time to root...
Related
I've gone through all the steps to root, unlock, backup using cwm, but i keep on coming up with issues on bootup after updating via fastboot. any ideas? when it does properly boot up it shows the updated M screen, and the att screen, but then stalls out. also, I've seen 2 android warning screens, one with the android guy and a white triangle with a yellow exlamation point in it, and also have seen the android guy on its back with a red shaded triangle with a black exlamation point in it.
any help would be greatly appreciated.
I have 2 Atrixs, one was at 2.3.4 and the other was 2.3.6, both are experiencing the same problems
android system recovery attempt at applying update failed due to e:signature verification failed
If you're going to flash raw images via fastboot, the order shouldn't really matter. Just make sure you wipe everything before flashing.
wiping down the cache was what i did, at least thats what the cwm instructions were telling me. At that point i rebooted and entered into fastboot, flashed the files in the exact order displayed over at andriod police, rebooted, and stalled out during boot up at the att screen.
Since the files were flashed and should be there on the atrix, what would you suggest i do?
I selected to install 4.4 from my OTA notification and after it restarted my phone and then had the animation of an Android working it then went to the black screen with the white "Google" and it has been stuck there ever since. I held down the power key for ten seconds and it restarted and seems to be stuck in a bootloop. I tried entering recovery but i get a broken android animation saying i believe "no command"
So what can I do?
My phone was stock, so this should have been a simple update right?
I am pretty much a noobie.
I followed a step by step set of instructions for sideloading the update via a zip file, but when I get to the point I need to enter recovery mode nothing happens, i cant get to where i need to be. And my computer doesnt see my phone anymore when I plug it in via USB
Any advice would be greatly appreciated
thanks
Sideload the flashable zip of stock rom or any rom with the same android version in recovery ( guide )
Then flash back stock factory images (optional) ( guide ).
You can also refer this thread here.
Good luck.
I'm having a problem getting into my recovery. I have the D800. It started out I sideloaded cwr thru twrp. And it said it flashed fine. I selected to reboot back into recovery and got a fastboot error. So i tried just rebooting and couldnt get passed the splash image. So I did the whole flash stock firmware. And after i got done with that, I think I did the ota update, And I got my phone rerooted. But still no recovery, it loads to a black screen and my pc says I have to format drives from like u-z but one has a folder titled image with these files. I've tried adb pusing and flashy and nothin,.Please help
never mind I got it fixed I think. Please delete post
Hello, I was given a friend's N7 to repair. He wants data to be saved but the device is stuck in the KitKat boot animation. I can't find any way to get to the user files on the device. If I go into recovery mode, I get the message "no command" so I'm unsure what to do at this point.
If the data is not recoverable, how can I reset it back to factory if I'm getting this "no command" error as well?
Thanks for any help
If the bootloader is unlocked then you could try dirty flashing a stock ROM to try and get it to boot the other thing you could try would be to go into fastboot mode and try fastboot pull *insert file path of data* not sure if that would work though if neither of them works and you just want to wipe and reset then download wugfresh NRT and use the unroot and back to stock option tick soft bricked
Sent from my C5303 using xda app-developers app
Well, while trying to flash a custom rom on my phone I ended up here and tried many different methods.
First after I installed TWRP on the phone I tried to install the rom and it told me it failed. So then I wiped my phone and tried again, still failed. Then I got stuck in a bootloop. I did a factory reset and was able to get into TWRP. So I wiped everything and it asked me if I wanted to root my phone. I said yes and now the boot screen stays forever and the notification led never turns off. So I did factory reset and tried to run a command on terminal "dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota" it still did not boot up.
I have tried flashes the stock and I can't get oceanhost.eu and storagecow.eu to load up.
Please I would appreciate any help, is my phone dead? I can always boot to TWRP as long as I factory reset.
The Need said:
Well, while trying to flash a custom rom on my phone I ended up here and tried many different methods.
First after I installed TWRP on the phone I tried to install the rom and it told me it failed. So then I wiped my phone and tried again, still failed. Then I got stuck in a bootloop. I did a factory reset and was able to get into TWRP. So I wiped everything and it asked me if I wanted to root my phone. I said yes and now the boot screen stays forever and the notification led never turns off. So I did factory reset and tried to run a command on terminal "dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota" it still did not boot up.
I have tried flashes the stock and I can't get oceanhost.eu and storagecow.eu to load up.
Please I would appreciate any help, is my phone dead? I can always boot to TWRP as long as I factory reset.
Click to expand...
Click to collapse
Sorry that I didn't mention this but, I am runnning a LGG2 802 16gb