Update: Got the ADB driver installed, but now I am getting an error 'Missing AdbWinApi.dll'. Trying to look for a fix for this but if anyone has any idea I would be very greatful. Thank you!
Related
Hi all. I have a htc wildfire, rooted with a custom rom. On the bus today I turned my phone off and then back on but it is constantly reboots after the initial screen (telstra logo because I am from Australia).
I can get into HBOOT but not recovery anymore (I used to be able too), it just repeats the same loop process. I've tried with/without the SD card present, and clearing storage through HBOOT.
Is there another way to flash or fix this? I'm fairly new at posting so sorry if this is in the wrong section, it's a tad urgent.
Thanks
Try flashing clockworkmod recovery again using unrevoked
Woudn't I have to have the phone on to be able to flash with unrevoked again?
If not, how would I go about doing it?
Thanks.
Maxcima said:
Woudn't I have to have the phone on to be able to flash with unrevoked again?
If not, how would I go about doing it?
Thanks.
Click to expand...
Click to collapse
Hi Maxcima,
Are you able to see anything via adb at all?
for example if you can connect to the device via adb, if you run:
adb logcat
can you see anything that could give us a clue to what's causing your issue?
~
ivyvisors said:
Hi Maxcima,
Are you able to see anything via adb at all?
for example if you can connect to the device via adb, if you run:
adb logcat
can you see anything that could give us a clue to what's causing your issue?
~
Click to expand...
Click to collapse
I'm sorry, I'm very new at this. What is adb exactly?
Maxcima said:
I'm sorry, I'm very new at this. What is adb exactly?
Click to expand...
Click to collapse
Just done a quick search and am now setting up adb. I'll get back to you shortly.
Thanks!
ivyvisors said:
Hi Maxcima,
Are you able to see anything via adb at all?
for example if you can connect to the device via adb, if you run:
adb logcat
can you see anything that could give us a clue to what's causing your issue?
~
Click to expand...
Click to collapse
I have setup adb and it is all working. However since I cannot boot into my device (constantly loops), adb continues to say "waiting for device..."
Is there a way to flash clockwork mod recovery some other way? Or to flash the device in the HBOOT environment?
I have an ATT X10, and i can no longer root it...after updating via Sues Anyway...2.1 update 1, bb 54, build 435. I have installed ADB and i get the error, " ADB didn't ACK, starting on port 5037*. Checked all drivers, everything is fine...even uninstalled ADB and tried reinstalling still the same...superoneclick, i get the same error..FAILED By the way debugging is enabled, unknown sources also! X10 drivers installed and gordons gate for flashtool. I've tried it all, and i cant figure it out! I don't want to go to the extent of clean installing windows 7 again..hope not. Can it be rooted manually like the first root was ha?!?! Please help and thank you much!
Flashtool also says searching adb device please plug in etc...it is...same thing again. Only option i have there is to flash, all other options are greyed out! I don't get it!
someone. Anyone?
No replies so i have decided to do a clean install of windows 7...ah the agony....
After doing full windows 7 reinstall everything works...awesome...please delete this thread thank you!
Hi all,
As mentioned in the title, an update from LG came for my 802 and suddenly, it booted and entered TWRP.
Now, it always goes back to TWRP. Anyone knows how I can solve this or boot normally again?
Thx,
Xiribi
TWRP, that's the problem.
Custom recovery and OTA will be end like this.
Easy fix here
Xenovias said:
TWRP, that's the problem.
Custom recovery and OTA will be end like this.
Easy fix here
Click to expand...
Click to collapse
Will this reset the phone?
Don't want to lose all the data
Xenovias said:
TWRP, that's the problem.
Custom recovery and OTA will be end like this.
Easy fix here
Click to expand...
Click to collapse
but when i do this fix is the ota update then installed?
Edit: the update is not installed but how do i get that update installed whit cwm or other recovery?
Xenovias said:
TWRP, that's the problem.
Custom recovery and OTA will be end like this.
Easy fix here
Click to expand...
Click to collapse
Unfortunatelly this did not solve the problem.
Keeps in a bootloop now and nothing happen.
Anyone remenbers where I can find the ADB thread to restore the phone?
When I try now I get an error that the ADB shell is is error: closed.
I'm looking for a way to put an image back on the phone.
THX guys.
Xiribi said:
Unfortunatelly this did not solve the problem.
Keeps in a bootloop now and nothing happen.
Anyone remenbers where I can find the ADB thread to restore the phone?
When I try now I get an error that the ADB shell is is error: closed.
I'm looking for a way to put an image back on the phone.
THX guys.
Click to expand...
Click to collapse
Use the terminal command if you can't use ADB... might work?
That's what I did, because AT&T stops giving you the option to not update after a couple times, and then I got stuck like you.
http://forum.xda-developers.com/showthread.php?t=2582142
please learn to search and read before doing stuff on your precious phone
FiendFyre said:
Use the terminal command if you can't use ADB... might work?
That's what I did, because AT&T stops giving you the option to not update after a couple times, and then I got stuck like you.
Click to expand...
Click to collapse
i did use the terminal and got into the boot loop.
Cannot perform any operation trough command because it gives me an error saying that the adb shell is error closed.
I'm now trying something else with some LG tools I found here. Hope it works, if it does, I'll repost the link here.
Xiribi said:
i did use the terminal and got into the boot loop.
Cannot perform any operation trough command because it gives me an error saying that the adb shell is error closed.
I'm now trying something else with some LG tools I found here. Hope it works, if it does, I'll repost the link here.
Click to expand...
Click to collapse
I'm not sure what happened for you, because the terminal command worked for me... maybe you mistyped it, or maybe you had a slightly different problem or something. Not sure.
Guys,
I finnaly managed to have my device working.
Trough ADB shell and then trough ADB I was able to copy a downloaded ROM (FLEX rom) to the device and installed it.
After a couple of hours, all is OK.
THANK YOU ALL FOR THE HELP AND INFO!!! (PS: sorry for the caps)
please guys need help i cant load nvidia shield drivers anymore since soft brick every time i try to do it in device manager it tell me it can't run program make sure its compatible with 64 bit. I tried to fix it doing adb sideload but none of the os updates from the website are installing any help would be appreciated
edit i think i have found a solution to the problem of the soft brick but i need to get the ota update 1.3 in zip form to adb sideload it does anyone know how
gottley94 said:
please guys need help i cant load nvidia shield drivers anymore since soft brick every time i try to do it in device manager it tell me it can't run program make sure its compatible with 64 bit. I tried to fix it doing adb sideload but none of the os updates from the website are installing any help would be appreciated
edit i think i have found a solution to the problem of the soft brick but i need to get the ota update 1.3 in zip form to adb sideload it does anyone know how
Click to expand...
Click to collapse
I'd maybe start a new thread or edit the title of this one buddy. I don't know about the OTA but you could download the full 1.3 firmware from the Nvidia download centre. https://developer.nvidia.com/gameworksdownload
Hi, im trying to flash an Ultratablet but I cant get it to show as a device under fastboot. The devicemanager on Win10 is showing the driver is missing (see attachment) but I cant seem to find a working usb driver for it anywhere.
Does anyone have these or a link to them?
Thanks, Rob.
Just in case anyone else comes across this I downloaded the Google usb driver package and followed the instructions here http://www.addictivetips.com/mobile/enable-adb-usb-drivers-for-nvidia-tegra-based-android-tablets/
I also had to disable driver signing so I could update the driver. Once this was done I could then install the driver and it was easy to flash the ROM.
can i ask something?
my remix ultratablet booting failed canntot to be home screen,i try using adb fastboot after 50% processing failed to open signature.
jammie*dodger said:
Just in case anyone else comes across this I downloaded the Google usb driver package and followed the instructions here http://www.addictivetips.com/mobile/enable-adb-usb-drivers-for-nvidia-tegra-based-android-tablets/
I also had to disable driver signing so I could update the driver. Once this was done I could then install the driver and it was easy to flash the ROM.
Click to expand...
Click to collapse
I know this is an older post, but wanted to take a second to thank you for closing the loop on your thread. This helped me with my Remix Ultratablet. I've had it rooted and tweaked since beginning and its been funky lately. Your post and link helped me get into Fastboot and flash the imgs to get back to stock. Running better now. Thanks!