I have a little problem,
i flashed the 5.5.0.4 CWM.
My issue however, is that i can't boot in recovery. Whenever i use an app to boot in recovery and just straight boots Android. Im not experiencing the recovery boot-loop.
The other problem is that i can't use ADB either, i have the stock ICS that can't recognize a PC connection via USB.
SBK2 so NVflash is out of the question.
Help
i want to get another recovery on there and flash another rom to avoid all these issues
Which app are you using exactly? Not all of them work correctly on the tf.
Have you try using the button combo method?
Hold down Vol down plus power button till you see words at top left
Immediately push Vol up within 5 sec should take you to recovery
As for ADB, do you have correct driver install?
Did you install ASUS PC sync?
kriEv said:
I have a little problem,
i flashed the 5.5.0.4 CWM.
My issue however, is that i can't boot in recovery. Whenever i use an app to boot in recovery and just straight boots Android. Im not experiencing the recovery boot-loop.
The other problem is that i can't use ADB either, i have the stock ICS that can't recognize a PC connection via USB.
SBK2 so NVflash is out of the question.
Help
i want to get another recovery on there and flash another rom to avoid all these issues
Click to expand...
Click to collapse
Had the same issues and installed an app called "Transformer reboot to Recovery" that worked!
Humm disregard this issue..
I wasn't pressing the VOL+ key to get in recovery.. strange because it never happened before but anyways..
should i still walk away from 5.5.0.4? Because i did some test and i have no issues with it..
kriEv said:
I have a little problem,
i flashed the 5.5.0.4 CWM.
Help
i want to get another recovery on there and flash another rom to avoid all these issues
Click to expand...
Click to collapse
See the following thread where this is discussed in detail. It is three posts down from yours on the first page.
http://forum.xda-developers.com/showthread.php?t=1530337
kriEv said:
The other problem is that i can't use ADB either, i have the stock ICS that can't recognize a PC connection via USB.
SBK2 so NVflash is out of the question.
Help
i want to get another recovery on there and flash another rom to avoid all these issues
Click to expand...
Click to collapse
I just used the SDK version ADB and Drivers to get ADB working fine. Just used it to put Revolver on.
I seriously searched EVERYWHERE.
My TF101 is now stuck in CWM. The only way to turn it off is a weird way I found out by holding POWER + VOL UP...
If I try to turn it off, it just turns back on. I have full adb access, and I wiped data/factory reset because I was trying to revert back to the original Asus ICS rom, but now I can only get into CWM and if I try booting into Android it just sits there forever. I tried downloading the "US_epaduser9_2_1_17.zip" and tried "adb install" onto the tablet, but it says there is no Manifest.xml
How do I reinstall ICS (stock) back on the tablet AND remove CWM? (Basically completely unroot it)
rthmn3021 said:
I seriously searched EVERYWHERE.
My TF101 is now stuck in CWM. The only way to turn it off is a weird way I found out by holding POWER + VOL UP...
If I try to turn it off, it just turns back on. I have full adb access, and I wiped data/factory reset because I was trying to revert back to the original Asus ICS rom, but now I can only get into CWM and if I try booting into Android it just sits there forever. I tried downloading the "US_epaduser9_2_1_17.zip" and tried "adb install" onto the tablet, but it says there is no Manifest.xml
How do I reinstall ICS (stock) back on the tablet AND remove CWM? (Basically completely unroot it)
Click to expand...
Click to collapse
If you're holding Power + Vol up it's not turning OFF but is simply in APX mode.
What version of CWM?
With ADB you have to ADB push NOT ADB install
I have version v5.5.0.4
I tried adb push but doesn't that just send the file to the tablet?
I can't access anything on the tablet, just cwm. If i try to "install from sdcard" it will say cannot mount "sdcard"
Also more info: I rooted with viper and then unrooted with it.
Try to reboot into system ,then when the screen goes off to do it hold power and volume-. Hopefully a screen will come up with some small print in the upper left hand corner . Let go of the power and volume and let it chill, should cold reboot after 10 sec
Sent from my Transformer TF101 using Tapatalk
Now it doesnt' even cold reboot..
I think I wiped the entire Android system away.
Because when I cold boot it from that menu with the 2 icons, it just stays there when I push ok.
Also, I have a microSD and it won't detect it. I tried formatting with the sd card formatter from the sd assosiation website with no luck. The only thing i can use right now is adb and cwm.
rthmn3021 said:
Now it doesnt' even cold reboot..
I think I wiped the entire Android system away.
Because when I cold boot it from that menu with the 2 icons, it just stays there when I push ok.
Also, I have a microSD and it won't detect it. I tried formatting with the sd card formatter from the sd assosiation website with no luck. The only thing i can use right now is adb and cwm.
Click to expand...
Click to collapse
With 5.5.0.4 it only read from the internal sd card.
Did you flash CWM via ROM Manager? If you did go here
http://forum.xda-developers.com/showthread.php?t=1530337
That thread will also show you how to use ADB to push files to the internal storage for flashing
Then you'll have to ad push. The problem is that recovery is ****ed. I don't have a whole lot of experience with adb, for some reason adb won't recognize my tf. I wish that I could help you more
Sent from my Transformer TF101 using Tapatalk
baseballfanz said:
With 5.5.0.4 it only read from the internal sd card.
Did you flash CWM via ROM Manager? If you did go here
http://forum.xda-developers.com/showthread.php?t=1530337
That thread will also show you how to use ADB to push files to the internal storage for flashing
Click to expand...
Click to collapse
Thank you for that! But, I don't really get the instructions. (I'M SUPER SORRY I'M TOTALLY NEW TO THIS D
while booted into CWM 5.5.0.4 ...
step 1: use adb to push a good recovery [I used Rogue XM v1.3.0 (CWM-based v5.0.2.7)]***
step 2: flash the zip
step 3: use the adb shell to execute the following command
What does it mean by good recovery and flash what zip?
Edit: When I try to push files to the tablet, how do I view them on there? I can't install from sdcard as it says it cannot mount it.
Please help? :/
I SOLVED IT!
I just used nvflash and reflashed the entire Asus ICS rom back on!
Thank you to everyone who tried to help!
(I don't know how to mark the thread as solved.)
rthmn3021 said:
I SOLVED IT!
I just used nvflash and reflashed the entire Asus ICS rom back on!
Thank you to everyone who tried to help!
(I don't know how to mark the thread as solved.)
Click to expand...
Click to collapse
Good to hear. Yeah it's good to have SBKv1.
Edit your original post and change the title
i have the same problem..
I only can access to recovery (5.8.x.x) or adb...
How can i flash new recovery for external sd card usage?
thanks
Check my recent posts for how I got help to solve the same problem.
Ok, I seem to be making things worse and worse, so I've come here to beg for help.
TLDR:
my acer iconia a500 was running skrilax_CZ's bootloader V8, I screwed it up (I think) by trying to install ClockworkRecovery.
I was still able to boot into Tegraowners_JB-MR1_ROM_v11t4
I messed a BUNCH more stuff up. a bunch!
Now, I can still see the internal and external SD but when i try to use blackthund3r's tools to root/recovery/custom-mod
it gets stuck when trying to enter APX mode. "No APX devices detected"
I do have the CPUID and the SBK
Longer explanation and details:
I installed Acer's USB drivers: USB_Acer_1.06.1500_A30H_A
I rooted the device using: ICS_rooting_A10x_A5xx --> runit-win.bat
I used blackthund3r's tools: A500APXFlash.exe and A500Manager.exe
I installed a custom bootloader rom: V8-Thor_1.7.3_recovery.a500apx
I installed Tegraowners_JB-MR1_ROM_v11t4 and gapps-jb-20130301-a500-v2
I was happy as a clam for 2 days playing with my fancy tablet.
I installed Superuser App
I made a nandroid backup at least once from the v8 bootloader.
I made a batch Titanium backup
I then tried installing clockwork recovery mod, and I think that's when i screwed myself.
Suddenly the power on + down_volume switch just led to a screen that said "Skrillax_CZ's bootloader V8"
"Booting recovery kernel image" and then it would hang there forever.
I could still boot into Tegraowners_JB-MR1_ROM_v11t4 so I tried to run a restore from Titanium Backup,
it froze halfway through with the message "superuser access denied"
I rebooted, and suddenly most of the widgets/apps are gone, and the back/home/and application navigation
button that are usually on the bottom left corner are also gone!
then I did a bunch of crazy/desperate stuff with blackthund3r's tools, (something involving trebuchet?)
and I finally blacked out amidst tears and despair around 5 am this morning.
so
now, when I use A500APXFlash.exe and A500Manager.exe it tries to put the tablet into APX mode, and the
tablet goes to a blackscreen, with a white LED on the power button, but I get the error "No APX devices detected"
I also tried inserting a paper clip then turning the power on, same result.
I do have the CPUID and the SBK
Please help if you can, and please dumb down your explanations if possible, this is my first tablet and
i'm totally new to android, etc.
Thanks for your time
-Joel
couple more details, it boots to the point where you swipe to unlock it, but when i do, i get a popup that says Trebuchet has stopped,
and when i click ok, it just comes back infinitum
oh, and when i use A500 Manager.exe it says that it's connected and usb debugging is ON, but I have no way of getting into the settings
to confirm that?
I don't want to come across as lazy, I literally have 8 tabs open from xda-developers and 3 from tegraowners. I also just tried afterotav_109 but that didn't do anything.
I found
the following files in
Computer\Acer Iconia Tab A500\Internal Storage\0\.AcerRecoveryInstaller
(see attached picture)
I'm guessing I can't rename recovery.old to recovery, or something easy like that?
small update, installed android SDK and adb shell
when I launch adb shell I can see the various directories on the tablet internal and external SD. I'm in the process of scouring the forums for info about how to use the adb tool to fix my problem, am I even on the right track?
thanks for any feedback y'all can provide
-Joel
j8ner said:
Ok, I seem to be making things worse and worse, so I've come here to beg for help.
Click to expand...
Click to collapse
I'm going to reply to each part of your post, just in case someone else is having the same probs...
Longer explanation and details:
I installed Acer's USB drivers: USB_Acer_1.06.1500_A30H_A
I rooted the device using: ICS_rooting_A10x_A5xx --> runit-win.bat
I used blackthund3r's tools: A500APXFlash.exe and A500Manager.exe
I installed a custom bootloader rom: V8-Thor_1.7.3_recovery.a500apx
I installed Tegraowners_JB-MR1_ROM_v11t4 and gapps-jb-20130301-a500-v2
Click to expand...
Click to collapse
TBH installing T/O's rom you should really be asking on their forum - their roms are a little different to the ones on xda - like, you don't need the v8 unlocked bootloader you can run it on HC or ICS Bootloaders.
android adb/usb drivers?? you dont mention them are they on your PC?
I then tried installing clockwork recovery mod
Click to expand...
Click to collapse
Didnt you already have cwm 1.7.3?
How did you try to install it? and yeh this is probably where you went wrong.
You must install custom recoverys using either fastboot or an appropriate flashable zip
Suddenly the power on + down_volume switch just led to a screen that said "Skrillax_CZ's bootloader V8"
"Booting recovery kernel image" and then it would hang there forever.
Click to expand...
Click to collapse
For future reference what you should have done here is run the 1.7.3.apx with apxflash tool.
I could still boot into Tegraowners_JB-MR1_ROM_v11t4 so I tried to run a restore from Titanium Backup,
it froze halfway through with the message "superuser access denied"
I rebooted, and suddenly most of the widgets/apps are gone, and the back/home/and application navigation
button that are usually on the bottom left corner are also gone!
then I did a bunch of crazy/desperate stuff with blackthund3r's tools, (something involving trebuchet?)
and I finally blacked out amidst tears and despair around 5 am this morning.
Click to expand...
Click to collapse
Yes it gets like that sometimes dont panic its fixable!
so
now, when I use A500APXFlash.exe and A500Manager.exe it tries to put the tablet into APX mode, and the
tablet goes to a blackscreen, with a white LED on the power button, but I get the error "No APX devices detected"
I also tried inserting a paper clip then turning the power on, same result.
I do have the CPUID and the SBK
Click to expand...
Click to collapse
If thats the error it means the drivers are screwed up. Completely uninstall the acer drivers, reboot and reinstall. But w8 theres more....
Make sure you got the adb/fastboot drivers here
Please help if you can, and please dumb down your explanations if possible, this is my first tablet and
i'm totally new to android, etc.
Thanks for your time
-Joel
couple more details, it boots to the point where you swipe to unlock it, but when i do, i get a popup that says Trebuchet has stopped,
and when i click ok, it just comes back infinitum
oh, and when i use A500 Manager.exe it says that it's connected and usb debugging is ON, but I have no way of getting into the settings
to confirm that?
I don't want to come across as lazy, I literally have 8 tabs open from xda-developers and 3 from tegraowners. I also just tried afterotav_109 but that didn't do anything.
I found the following files in Computer\Acer Iconia Tab A500\Internal Storage\0\.AcerRecoveryInstaller
(see attached picture)
Click to expand...
Click to collapse
Acer recovery installer? OK so I assume you used that to try and flash a recovery? This app works best on HC Bootloader - the only way to use it with ICS is IF you already have the v8.
Also, you must make sure you run the correct recovery for whatever version of ROM you are wanting to flash. So check the OP of your chosen rom for which recovery you need. Most of the ics/jb custom roms here on xda work with cwm 1.7.3, TWRP or public recovery. BUT these wont work on HC
I'm guessing I can't rename recovery.old to recovery, or something easy like that?
Click to expand...
Click to collapse
You can use an appropriate recovery.img and flash via fastboot
-------------------------------------------------------------------------------------------
OK so lhow do we get you fixed???
You need to do a complete FORMAT (factory data reset) of your system to get it back to a state where you can use the tools.
Install the adb drivers first!
Lets see if fastboot mode is available.
As long as you see skrilax_cz v8 bootloader on your screen connect yr micro usb cable - power down and boot up holding VOLUME UP button...you should see the fastboot menu now follow the instructions here on using the fastboot commands to WIPE userdata and cache
THEN if you have the correct recovery.img you can flash this too (see that post) if not run the apxflash tool again using cwm 1,7,3.apx file.
Now, once you have run it BOOT DIRECTLY to recovery and flash your rom. (Doesnt matter which one as long as its ICS or JB...)
This is important...if you try and boot yr tabs OS, you'll get either booting primary kernel error or be stuck on the acer logo -
IF fastboot is not available then run the apxflash tool to install recovery instead then using that same post it shows you how to do a full format wipe, with cwm.
I hope this isnt too over the top for you...I've tried to explain things so you can understand a bit better - but I may have to 'dumb' things down a bit more, let me know
good luck with it
dibb
thank you so much for replying, i'll get right on this
Dibb thank you very much, as soon as I get back I'm going to go through your directions step by step.
I really appreciate your help, and I'll post an update later tonight.
in fastboot, please advise
dibb_nz said:
Acer recovery installer? OK so I assume you used that to try and flash a recovery? This app works best on HC Bootloader - the only way to use it with ICS is IF you already have the v8.
Also, you must make sure you run the correct recovery for whatever version of ROM you are wanting to flash. So check the OP of your chosen rom for which recovery you need. Most of the ics/jb custom roms here on xda work with cwm 1.7.3, TWRP or public recovery. BUT these wont work on HC
You can use an appropriate recovery.img and flash via fastboot
-------------------------------------------------------------------------------------------
OK so lhow do we get you fixed???
You need to do a complete FORMAT (factory data reset) of your system to get it back to a state where you can use the tools.
Install the adb drivers first!
Lets see if fastboot mode is available.
As long as you see skrilax_cz v8 bootloader on your screen connect yr micro usb cable - power down and boot up holding VOLUME UP button...you should see the fastboot menu now follow the instructions here on using the fastboot commands to WIPE userdata and cache
THEN if you have the correct recovery.img you can flash this too (see that post) if not run the apxflash tool again using cwm 1,7,3.apx file.
Now, once you have run it BOOT DIRECTLY to recovery and flash your rom. (Doesnt matter which one as long as its ICS or JB...)
This is important...if you try and boot yr tabs OS, you'll get either booting primary kernel error or be stuck on the acer logo -
IF fastboot is not available then run the apxflash tool to install recovery instead then using that same post it shows you how to do a full format wipe, with cwm.
I hope this isnt too over the top for you...I've tried to explain things so you can understand a bit better - but I may have to 'dumb' things down a bit more, let me know
good luck with it
dibb
Click to expand...
Click to collapse
DIBB IS TEH AWSEOMEMEMEST!!!!!!!
fastoot mode worked!
one thing that threw me off is that I had to figure out that I needed to type
Code:
fastboot.exe flash [B]recovery[/B] recovery_thor17_403.img
the guide here
doesn't specify which partition to use so I got an error message until I guesstimated I wanted the boot partition.
Anyway, once you fixed my bootloader, I restored the full system from a backup I had made on the first of the month.
thank you thank you for your awesome help!
now I can break it again and again!
made a minor edit, changed boot --> recovery in the "code" section above
j8ner said:
DIBB IS TEH AWSEOMEMEMEST!!!!!!!
fastoot mode worked!
one thing that threw me off is that I had to figure out that I needed to type
Code:
fastboot.exe flash [B]recovery[/B] recovery_thor17_403.img
the guide here
doesn't specify which partition to use so I got an error message until I guesstimated I wanted the boot partition.
Anyway, once you fixed my bootloader, I restored the full system from a backup I had made on the first of the month.
thank you thank you for your awesome help!
now I can break it again and again!
made a minor edit, changed boot --> recovery in the "code" section above
Click to expand...
Click to collapse
Glad u got it
Not sure why you had to use fastboot.exe as the command tho? but as long as it worked and you're up and running, that's the main thing!
happy flashing
dibb
Edit: have edited guide to show recovery partition - thank for picking that up
Sent from my GT-I9300 using Tapatalk 4 Beta
Hi Everyone
A while back I was having all sorts of problems trying to flash a patched bootloader to my Acer A500 So that I could install a custom recovery, Custom ROMS , etc...
Well thanks to some help from this awesome site, and a member here that pointed me to an NVFlash archive (Bab-Sector) with a script in it and it worked perfect. The Script however was using the V8 bootloader instead of V9, and I wanted to go with the V9 Bootloader 03.14-EXT So I updated the scripts to install the bootloader to SkrilaxCZ v9 Patched for Acer A500, and I also added Thor2002ro CWM 1.7.3 touch, instead of 1.7. 1.7.3 works a whole lot better
*****************************IMPORTANT**************************
Before using these tools make sure to back up your tablet first, and have a good ROM ready to install once you have your patched bootloader installed. Using this tool to Install the patched bootloader will render your current ROM unusable. You will have to install a new ROM as soon as your finished. This will also fix all the partitions on your tablet, so that they are all correct, but in doing it destroys your current install.
So any way here is a quick guide to flash the patched V9 bootloader file on your Acer A500:
Before you Continue:
You will need to know your SBK
And you need to have all the proper Acer USB drivers installed.
Plus you will need this file: A500-Bootloader-V9_Babsector
Extract the contents to some folder, and open the folder.
Now power off the tablet, and while it is connected to your PC via USB take a paperclip and press the reset button (located on the side next to the full size USB port, a small hole) and the power button, slowly count to 3 then release the power button, count one more to 4 and then release the reset button. Now your tablet is in APX download mode.
Open the folder where you extracted the bootloader and tools. Double click the file a501 A.bat. Enter your SBK.
The bootloader will be flashed, and Thor2002ro CWM 1.7.3 Custom Recovery will be installed, upon completion the screen will say PASS.
Now hold down the power button until the tab turns off, then hold the vol down button along with the power button to boot into CWM. Once in CWM navigate to the mounts and storage menu, then format system partition twice. Now go back to the power menu, and power off the tablet.
Now you need to boot APX download mode again, take a paperclip and press the reset button and the power button, slowly count to 3 then release the power button, count one more to 4 and release the reset button. Now your tablet is in APX download mode again.
Back to the folder where you extracted the bootloader and tools again. Now double click the file a501 B.bat.
The bootloader will be flashed again, and Thor2002ro CWM 1.7.3 Custom Recovery will be reinstalled, upon completion the screen will once again display PASS. You are finished, and you have a good custom recovery, along with the best patched bootloader for the A500.
Now you are ready to install custom ROMS from Thor2002ro CWM Touch.
If you decide that you no longer want to have the patched bootloader you can restore your A500 to complete stock ICS4.0.3 with this ROM: Stock ROM Acer_AV041_A500_1.033.00_PA_CUS1
You can flash this ROM with CWM or rename it to update.zip and place on root of external SD and the stock recovery will install it also. after the ROM has installed the tablet needs to reboot and the bootloader will be installed, then the tab will reboot, and you are back to 100% stock Acer_AV041_A500_1.033.00_PA_CUS1. You will not have root, and the bootloader will also be stock. This is the file you need if for some reason you should ever need to have your tablet sent to Acer, to be worked on. under warranty for example, or if you just want to have the tablet returned to stock.
I really hope this little guide helps someone, I know that a few months ago this would have helped me out when I could not flash my bootloader from windows with either the Black Thund3rAPX tool or AfterOTA, both of which are excellent tools, but for some reason they just would not work with my tab until after I had flashed my bootloader with NVFlash the way I explain here.
Also I need to point out that the scripts and tools included in the bootloader archive are originally the Bab-Sector tools. I just updated the bootloader files to SkrilaxCZ V9 Bootloader, with the green Acer logo, and the Custom Recovery to Thor2002ro CWM Touch 1.7.3
Thanks
- Kaiji
Omg! Thank you!
Thank you, thank you, thank you. I've been trying for two days to get a custom recovery to install. I too used Blackthund3r's tools, but nothing was working. I think my partition table was screwed. It took me forever just to get the drivers to recognize APX mode. Google's generic driver's > Acers! Again thank you so much.
KaijiKun said:
Hi Everyone
A while back I was having all sorts of problems trying to flash a patched bootloader to my Acer A500 So that I could install a custom recovery, Custom ROMS , etc...
Well thanks to some help from this awesome site, and a member here that pointed me to an NVFlash archive (Bab-Sector) with a script in it and it worked perfect. The Script however was using the V8 bootloader instead of V9, and I wanted to go with the V9 Bootloader 03.14-EXT So I updated the scripts to install the bootloader to SkrilaxCZ v9 Patched for Acer A500, and I also added Thor2002ro CWM 1.7.3 touch, instead of 1.7. 1.7.3 works a whole lot better
*****************************IMPORTANT**************************
Before using these tools make sure to back up your tablet first, and have a good ROM ready to install once you have your patched bootloader installed. Using this tool to Install the patched bootloader will render your current ROM unusable. You will have to install a new ROM as soon as your finished. This will also fix all the partitions on your tablet, so that they are all correct, but in doing it destroys your current install.
So any way here is a quick guide to flash the patched V9 bootloader file on your Acer A500:
Code:
Before you Continue:
You will need to know your SBK
And you need to have all the proper Acer USB drivers installed.
Plus you will need this file: http://www.4shared.com/zip/dbt1DsjT/A500-Bootloader-V9-Nvflash.html
Extract the contents to some folder, and open the folder.
Now power off the tablet, and while it is connected to your PC via USB take a paperclip and press the reset button (located on the side next to the full size USB port, a small hole) and the power button, slowly count to 3 then release the power button, count one more to 4 and then release the reset button. Now your tablet is in APX download mode.
Open the folder where you extracted the bootloader and tools. Double click the file a501 A.bat. Enter your SBK.
The bootloader will be flashed, and Thor2002ro CWM 1.7.3 Custom Recovery will be installed, upon completion the screen will say PASS.
Now hold down the power button until the tab turns off, then hold the vol down button along with the power button to boot into CWM. Once in CWM navigate to the mounts and storage menu, then format system partition twice. Now go back to the power menu, and power off the tablet.
Now you need to boot APX download mode again, take a paperclip and press the reset button and the power button, slowly count to 3 then release the power button, count one more to 4 and release the reset button. Now your tablet is in APX download mode again.
Back to the folder where you extracted the bootloader and tools again. Now double click the file a501 B.bat.
The bootloader will be flashed again, and Thor2002ro CWM 1.7.3 Custom Recovery will be reinstalled, upon completion the screen will once again display PASS. You are finished, and you have a good custom recovery, along with the best patched bootloader for the A500.
Now you are ready to install custom ROMS from Thor2002ro CWM Touch.
If you decide that you no longer want to have the patched bootloader you can restore your A500 to complete stock ICS4.0.3 with this ROM
Code:
Stock ROM Acer_AV041_A500_1.033.00_PA_CUS1
http://www.4shared.com/zip/R6Wn2rFJ/A500-Stock.html
You can flash this ROM with CWM or rename it to update.zip and place on root of external SD and the stock recovery will install it also. after the ROM has installed the tablet needs to reboot and the bootloader will be installed, then the tab will reboot, and you are back to 100% stock Acer_AV041_A500_1.033.00_PA_CUS1. You will not have root, and the bootloader will also be stock. This is the file you need if for some reason you should ever need to have your tablet sent to Acer, to be worked on. under warranty for example, or if you just want to have the tablet returned to stock.
I really hope this little guide helps someone, I know that a few months ago this would have helped me out when I could not flash my bootloader from windows with either the Black Thund3rAPX tool or AfterOTA, both of which are excellent tools, but for some reason they just would not work with my tab until after I had flashed my bootloader with NVFlash the way I explain here.
Also I need to point out that the scripts and tools included in the bootloader archive are originally the Bab-Sector tools. I just updated the bootloader files to SkrilaxCZ V9 Bootloader, with the green Acer logo, and the Custom Recovery to Thor2002ro CWM Touch 1.7.3
Thanks
- Kaiji
Click to expand...
Click to collapse
Nice guide Kaiji...a quick question. Do u know why babsector requires u to run both bat files. A few folks have just run the first one, done the formats then flashed their rom. Seems no one had any problems. Could u explain ( to a noob like me how babsector actually works? ??
rgds dibb
Sent from my GT-I9300 using Tapatalk 4
dibb_nz said:
Nice guide Kaiji...a quick question. Do u know why babsector requires u to run both bat files. A few folks have just run the first one, done the formats then flashed their rom. Seems no one had any problems. Could u explain ( to a noob like me how babsector actually works? ??
rgds dibb
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
Thanks
Actually both of those batch files are identical, I believe that the original writer wanted to be sure that any corrupted data, and or partitions were repaired. And that is exactly what they do.What happens is after the tab is in apx mode a temporary rw bootloader image is uploaded, and then the file correctly maps out and create the partitions needed for you tablet, then it uploads the bootloader, and recovery images. now with your new patched bootloader you can boot to custom recovery, install custom ROM's, and you could even install a second OS and set up a dual boot scenario, Skrilax_CZ has some really great tutorials on this here. You will also find that Blackthund3r's tools will also work now too.
- Kaiji
dibb_nz said:
; Nice guide Kaiji...a quick question....... Could u explain ( to a noob like me how babsector actually works? ??
rgds dibb
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
Thank you
I am very happy that you, a senior member, actually thinks the guide is good. It really does mean a lot ( to a noob like me
I have actually just been poking around, and learning alI I can. I have always been a big fan of the Linux system, and the fact that it is now, in its Android form so huge world wide, on smartphones, and tablets everywhere is awesome!!
Any way I do really love that Android is based on the open source Linux code, and since it is, it's 100% customizable, hackable, & rewritable, sweet!!.
Oh yeah, To continue on a bit more about babsector, from my last post. The way that babsector actually works is this, while the tablet is is the NVidia APX download mode, the program NVFlash can then upload the special temporary APX mode bootloader image with rw abilities so that NVFlash can then set the partitions, and upload you patched bootloader. At least I believe that is how it all works. As I said I am just poking around, hehehe, an old linux user trying to learn all I can and then pass it on so everyone can enjoy the full potential of their devices.
- Kaiji
Not Working
KaijiKun said:
Hi Everyone
A while back I was having all sorts of problems trying to flash a patched bootloader to my Acer A500 So that I could install a custom recovery, Custom ROMS , etc...
Well thanks to some help from this awesome site, and a member here that pointed me to an NVFlash archive (Bab-Sector) with a script in it and it worked perfect. The Script however was using the V8 bootloader instead of V9, and I wanted to go with the V9 Bootloader 03.14-EXT So I updated the scripts to install the bootloader to SkrilaxCZ v9 Patched for Acer A500, and I also added Thor2002ro CWM 1.7.3 touch, instead of 1.7. 1.7.3 works a whole lot better
*****************************IMPORTANT**************************
Before using these tools make sure to back up your tablet first, and have a good ROM ready to install once you have your patched bootloader installed. Using this tool to Install the patched bootloader will render your current ROM unusable. You will have to install a new ROM as soon as your finished. This will also fix all the partitions on your tablet, so that they are all correct, but in doing it destroys your current install.
So any way here is a quick guide to flash the patched V9 bootloader file on your Acer A500:
Before you Continue:
You will need to know your SBK
And you need to have all the proper Acer USB drivers installed.
Plus you will need this file: A500-Bootloader-V9_Babsector
Extract the contents to some folder, and open the folder.
Now power off the tablet, and while it is connected to your PC via USB take a paperclip and press the reset button (located on the side next to the full size USB port, a small hole) and the power button, slowly count to 3 then release the power button, count one more to 4 and then release the reset button. Now your tablet is in APX download mode.
Open the folder where you extracted the bootloader and tools. Double click the file a501 A.bat. Enter your SBK.
The bootloader will be flashed, and Thor2002ro CWM 1.7.3 Custom Recovery will be installed, upon completion the screen will say PASS.
Now hold down the power button until the tab turns off, then hold the vol down button along with the power button to boot into CWM. Once in CWM navigate to the mounts and storage menu, then format system partition twice. Now go back to the power menu, and power off the tablet.
Now you need to boot APX download mode again, take a paperclip and press the reset button and the power button, slowly count to 3 then release the power button, count one more to 4 and release the reset button. Now your tablet is in APX download mode again.
Back to the folder where you extracted the bootloader and tools again. Now double click the file a501 B.bat.
The bootloader will be flashed again, and Thor2002ro CWM 1.7.3 Custom Recovery will be reinstalled, upon completion the screen will once again display PASS. You are finished, and you have a good custom recovery, along with the best patched bootloader for the A500.
Now you are ready to install custom ROMS from Thor2002ro CWM Touch.
If you decide that you no longer want to have the patched bootloader you can restore your A500 to complete stock ICS4.0.3 with this ROM: Stock ROM Acer_AV041_A500_1.033.00_PA_CUS1
You can flash this ROM with CWM or rename it to update.zip and place on root of external SD and the stock recovery will install it also. after the ROM has installed the tablet needs to reboot and the bootloader will be installed, then the tab will reboot, and you are back to 100% stock Acer_AV041_A500_1.033.00_PA_CUS1. You will not have root, and the bootloader will also be stock. This is the file you need if for some reason you should ever need to have your tablet sent to Acer, to be worked on. under warranty for example, or if you just want to have the tablet returned to stock.
I really hope this little guide helps someone, I know that a few months ago this would have helped me out when I could not flash my bootloader from windows with either the Black Thund3rAPX tool or AfterOTA, both of which are excellent tools, but for some reason they just would not work with my tab until after I had flashed my bootloader with NVFlash the way I explain here.
Also I need to point out that the scripts and tools included in the bootloader archive are originally the Bab-Sector tools. I just updated the bootloader files to SkrilaxCZ V9 Bootloader, with the green Acer logo, and the Custom Recovery to Thor2002ro CWM Touch 1.7.3
Thanks
- Kaiji
Click to expand...
Click to collapse
Hi Kaiji,
I tried your trick but it is not working for me. Could you please help me to solve this issue?
When i run first a501A file my tablet vibrate and went to download mode. I have attached file what exactly i get (file no. 1) and when i try to run the batch file again while tablet in download mode i get result (file no. 2). Please direct me what exactly i need to do?
Thanks
jd4r said:
Hi Kaiji,
I tried your trick but it is not working for me. Could you please help me to solve this issue?
When i run first a501A file my tablet vibrate and went to download mode. I have attached file what exactly i get (file no. 1) and when i try to run the batch file again while tablet in download mode i get result (file no. 2). Please direct me what exactly i need to do?
Thanks
Click to expand...
Click to collapse
Hmm, I wonder what the problem could be.... I would say for starters, try reinstalling the drivers, reboot, and try the script again. making sure to runit as Administrator. Also do you have AfterOTA? send me a PM after you try reinstalling your drivers, and if you are still having trouble tomorow, I will PM you my phone # and I will do my best to help you solve this over the phone.
I will be online tomorow around 12:00 noon EDT and will look for your PM and/or a reply
- Kaiji
Thanks.
KaijiKun said:
Hmm, I wonder what the problem could be.... I would say for starters, try reinstalling the drivers, reboot, and try the script again. making sure to runit as Administrator. Also do you have AfterOTA? send me a PM after you try reinstalling your drivers, and if you are still having trouble tomorow, I will PM you my phone # and I will do my best to help you solve this over the phone.
I will be online tomorow around 12:00 noon EDT and will look for your PM and/or a reply
- Kaiji
Click to expand...
Click to collapse
Thanks for your response. I appreciate it. My problem got resolved after running Acera500 flash tool.
Thanks again for your help.
jd4r said:
Thanks for your response. I appreciate it. My problem got resolved after running Acera500 flash tool.
Thanks again for your help.
Click to expand...
Click to collapse
No problem , I am very glad your problems were resolved. And, if you don't mind, I have a few questions for you.
1. What exactly went wrong in your situation?
2. Which tablet are you using?
3. And, how did you solve your problems exactly?
The reason I ask is that each tablet/software combination may each be a little unique, and the details of your experience can be very helpful to others as they encounter their own situation, and most of all we can always learn more from everyones different case, and apply that knowledge to improving the ability to help in the next case. Also, please try to be as detailed as possible, if you decide to answer the questionsI asked.
Thank you very much for your input
- Kaiji
KaijiKun said:
Hi Everyone
I really hope this little guide helps someone, I know that a few months ago this would have helped me out when I could not flash my bootloader from windows with either the Black Thund3rAPX tool or AfterOTA, both of which are excellent tools, but for some reason they just would not work with my tab until after I had flashed my bootloader with NVFlash the way I explain here.
Also I need to point out that the scripts and tools included in the bootloader archive are originally the Bab-Sector tools. I just updated the bootloader files to SkrilaxCZ V9 Bootloader, with the green Acer logo, and the Custom Recovery to Thor2002ro CWM Touch 1.7.3
Thanks
- Kaiji
Click to expand...
Click to collapse
Well it got me from only booting to APX mode to having a bootloader, but I'm still having problems. I ran the script and got the PASS screen. Now it boots to the bootloader but I'm no longer able to use the reset button to get to the APX mode. Even when I hold the reset button while powering on, it just goes to the bootloader. It also does this just powering on without press the -vol button. I'm assuming this was because I was also getting an error message say the Lnx kernel was invalid.
So I went ahead and flashed the A500-stock.zip and no longer get the invalid kernel message but it still boots to the loader menu with the options Primary (LNX), Recovery and Fastboot. But when I choose the first option it hangs on the first screen saying "Booting Android Image from LNX partition..." Revovery takes me to the recovery menu and Fastboot connect me to my PC in ADB mode.
Any suggestion about where I go from here?
4929york said:
Well it got me from only booting to APX mode to having a bootloader, but I'm still having problems. I ran the script and got the PASS screen. Now it boots to the bootloader but I'm no longer able to use the reset button to get to the APX mode. Even when I hold the reset button while powering on, it just goes to the bootloader. It also does this just powering on without press the -vol button. I'm assuming this was because I was also getting an error message say the Lnx kernel was invalid.
So I went ahead and flashed the A500-stock.zip and no longer get the invalid kernel message but it still boots to the loader menu with the options Primary (LNX), Recovery and Fastboot. But when I choose the first option it hangs on the first screen saying "Booting Android Image from LNX partition..." Revovery takes me to the recovery menu and Fastboot connect me to my PC in ADB mode.
Any suggestion about where I go from here?
Click to expand...
Click to collapse
I got APX mode working again. I had to fall back to Win 7. In Win 8 it couldn't find tthe APX driver.
So, I started from scratch and ran the A501.A bat, then formatted the /system twice. Then rebooted into APX and ran the a501.B script and got this error. "Formatting partition 2 BCT please wait... FAILED!" What now????? PLEASE HELP!!!!!
jd4r said:
Hi Kaiji,
I tried your trick but it is not working for me. Could you please help me to solve this issue?
When i run first a501A file my tablet vibrate and went to download mode. I have attached file what exactly i get (file no. 1) and when i try to run the batch file again while tablet in download mode i get result (file no. 2). Please direct me what exactly i need to do?
Thanks
Click to expand...
Click to collapse
im having the same problem as u were having with the attachments on the error codes u got can u share some light to me on the solution u was told to use
Im about at my wits end and gonna make a paper weight out of this thing I guess. I had recovered it with the Timmy Dean tool once already, and was on HC for about a week. I wanted to upgrade to ICS. So I tried to flash to bootloader but somehow got to where I can only boot into APX mode. I keep hanging on every tool I use. Here is a screen shot of the error when using the babsector in this thread. As far as I know I have the correct drivers from Acers site, but not sure about the adb drivers. I have them, but they don't "install" like the acer drivers did. How do I know they are correct? See my error attached photo. Is it possible to have something so messed up that even though apx mode works, it still wont flash itself out of the problem?
Need help with running A501 A.bat
Hi there. I put my tablet into APX mode by following the instructions above. However, when I run the A501 A.bat script, it reports that "USB device not found"
I have my tablet connected to my desktop via a USB-miniUSB cable. The connection works fine when the tablet is on, but it doesn't register it when the tablet is in APX mode
Any suggestions? Thanks!
romUser1365 said:
Hi there. I put my tablet into APX mode by following the instructions above. However, when I run the A501 A.bat script, it reports that "USB device not found"
I have my tablet connected to my desktop via a USB-miniUSB cable. The connection works fine when the tablet is on, but it doesn't register it when the tablet is in APX mode
Any suggestions? Thanks!
Click to expand...
Click to collapse
Just a couple suggestions, I would start by making sure you have a known good micro USB cable, make sure it's plugged into a USB 2.0 port directly connected to you motherboard and not a USB hub or a USB 3.0 port as those can cause problems. The last thing I would recommend is to use Windows 7. Windows 10 may or may not work with this method as this tablet is pretty old. You can use a virtual machine to run Windows 7 and it should work fine. Hopefully this helps a bit.
turnert said:
Just a couple suggestions, I would start by making sure you have a known good micro USB cable, make sure it's plugged into a USB 2.0 port directly connected to you motherboard and not a USB hub or a USB 3.0 port as those can cause problems. The last thing I would recommend is to use Windows 7. Windows 10 may or may not work with this method as this tablet is pretty old. You can use a virtual machine to run Windows 7 and it should work fine. Hopefully this helps a bit.
Click to expand...
Click to collapse
I am unable to connect directly to the motherboard, as my PC is actually a laptop, and I don't really want to try and open it up. I did manage to use a vm and try this on Windows 7 with no luck . If anyone has any other suggestions I'm all ears. The only thing that I think might be causing these issues is that I'm using a USB 3.0 port (My laptop doesn't have 2.0 ports), so I'll update this reply once I find a computer that has usb 2.0 ports.
Also, do I need to install a custom recovery before running the A500 A and A500 B scripts? Are there tutorials on how to do that? I think I ran into issues last time I tried because I hadn't unlocked my bootloader (tablet wouldn't enter recovery mode). But, if I understand it correctly, the instructions for this thread tell you how to unlock the bootloader, but it also requires the custom recovery or else you lose your stock rom. It's quite a catch 22
romUser1365 said:
I am unable to connect directly to the motherboard, as my PC is actually a laptop, and I don't really want to try and open it up. I did manage to use a vm and try this on Windows 7 with no luck . If anyone has any other suggestions I'm all ears. The only thing that I think might be causing these issues is that I'm using a USB 3.0 port (My laptop doesn't have 2.0 ports), so I'll update this reply once I find a computer that has usb 2.0 ports.
Also, do I need to install a custom recovery before running the A500 A and A500 B scripts? Are there tutorials on how to do that? I think I ran into issues last time I tried because I hadn't unlocked my bootloader (tablet wouldn't enter recovery mode). But, if I understand it correctly, the instructions for this thread tell you how to unlock the bootloader, but it also requires the custom recovery or else you lose your stock rom. It's quite a catch 22
Click to expand...
Click to collapse
Yes you need to unlock your bootloader before you can get a custom rom or a custom recovery. But to do that you need root first. Also when I said connect your USB cable directly to your mother board I meant just any USB port on your motherboard.
turnert said:
Yes you need to unlock your bootloader before you can get a custom rom or a custom recovery. But to do that you need root first. Also when I said connect your USB cable directly to your mother board I meant just any USB port on your motherboard.
Click to expand...
Click to collapse
That would still involve opening up my laptop, no? Also, I don't think that the USB cable is the issue, as I am able to connect just fine when the tablet is powered on, but not in APX mode. Also, I have tried rooting it before with a couple methods, both of which failed in one way or another. I'm open to trying out some other method(s) if you have a suggestion
Hi!
I have a similar problem like other users. Ive try many metods and I cant unbrik my A500. I dont know witch BL etc it has. Ive tried many update.zips but always without result. I can enter in apx mode but no more...
When I run A501A the I have this problem.
* Reboot your tablet into APX mode *
Generate your SBK with your CPUID from here :
Enter your SBK:0x58244C00 0x6309C006 0x2B432404 0xB0512103
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x038892484340e057
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) message: nverror:0x8 (0x19000008) flags: 0
Presione una tecla para continuar . . .
-------------------------------------------------------
I cant solve it. Can you help me please.
Hey guys,
Yesterday I tried, after a few months of not modding my phone, to update my recovery as i was running a very old version of TWRP. Long story short I did something wrong somewhere and my phone has ended up in a bit of a weird state.
At the moment the OS is BlissRom, however it fails to boot. The loading screen runs very slowly and never actually boots the OS. The current recovery is the stock recovery.
The thing that is giving me an issue is the fact that somehow the bootloader has locked, so I am unable to flash a new OS onto my phone. I'm not able to flash anything onto my phone as it throws an error telling me the phone is locked.
Overall I aren't able to boot into the OS, however I have access to the stock recovery and fastboot. Unfortunately it looks as though the bootloader has locked some how.
Any ideas how I can fix this, or have I completely messed my phone up?
Thanks in advance.
Hi
U said u were running twrp before which means u have unlocked bootloader and flash roms already.
How did u end up with stock recovery?
Also is it phone being detected bycur PC?
Sent from my ONE A2005 using Tapatalk
I believe it was a result of running the QualComm restoration tool. I ran this and it didn't look as though it did anything however after i rebooted into recovery I found it was stock.
I'm not sure if using this tool also re locked the bootloader however as it appears to be locked and I cant flash anything in fastboot mode.
colinbest2 said:
I believe it was a result of running the QualComm restoration tool. I ran this and it didn't look as though it did anything however after i rebooted into recovery I found it was stock.
I'm not sure if using this tool also re locked the bootloader however as it appears to be locked and I cant flash anything in fastboot mode.
Click to expand...
Click to collapse
Did u also tried command fastboot oem unlock
Sent from my ONE A2005 using Tapatalk
Indeed I have, I get an error saying "phone is locked".
I think the resolution will be running the restoration tool fully but i cant seem to get it to do anything. It just sits there with no progress bars appearing.
Have you ever had any experience with this tool?
No I never used recovery tools.
Can u at any point let's say u boot into recovery and connect the device to PC, will it detected the internal storage?
Sent from my ONE A2005 using Tapatalk
Unfortunately not, if I boot the OS it gets stuck at the loading animation, it isn't a bootloop oddly enough.
Booting in recovery the PC doesn't detect the internal storage, however if I choose "Update from USB" I can see that ADB detects my phone in sideload mode.
Much like in fastboot mode I can see my PC detects my phone in fastboot mode.
I do have some OS zips on the internal storage which I have tried flashing in stock recovery, however these always result in "Install failed" errors.
Dude i think you have to use recovery tool now
Here is the link first read carefully https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Thanks for the link buddy.
I've gone through this thread, I think the issue preventing this from working for me is the fact that although I have installed the relevant drivers, when I plug my phone into my PC the drivers assigned to it are "Android Bootloader Interface". When I try to target another driver, using the Update driver functionality it just refuses to change, saying the driver already assigned is the newer one.
Any ideas how I can get around this? I know ideally it should appear as Qualcomm 9008. I've tried all the methods in the "How to Make the device show as Qualcomm 9008" section without any success.
colinbest2 said:
Unfortunately not, if I boot the OS it gets stuck at the loading animation, it isn't a bootloop oddly enough.
Booting in recovery the PC doesn't detect the internal storage, however if I choose "Update from USB" I can see that ADB detects my phone in sideload mode.
Much like in fastboot mode I can see my PC detects my phone in fastboot mode.
I do have some OS zips on the internal storage which I have tried flashing in stock recovery, however these always result in "Install failed" errors.
Click to expand...
Click to collapse
Here's what to do...
U will need to sideload the stock rom which can be downloaded from here: https://s3.amazonaws.com/oxygenos.o...4_OTA_020_all_1608262242_44a55e674a2b4bf6.zip
-Place the zip in ur adb folder and rename it to update.zip.
-Connect the Oneplus2 to the PC with USB cable and open a command prompt or terminal on your PC. To do this open the ADB folder press shift + right click and click on open command here.
-Reboot to recovery and select install from usb.
-Flash the OxygenOS on OnePlus 2 by typing:
adb sideload update.zip
-Now the update will start and this will take some time.
Hope it helped[emoji106]
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Here's what to do...
U will need to sideload the stock rom which can be downloaded from here: https://s3.amazonaws.com/oxygenos.o...4_OTA_020_all_1608262242_44a55e674a2b4bf6.zip
-Place the zip in ur adb folder and rename it to update.zip.
-Connect the Oneplus2 to the PC with USB cable and open a command prompt or terminal on your PC. To do this open the ADB folder press shift + right click and click on open command here.
-Reboot to recovery and select install from usb.
-Flash the OxygenOS on OnePlus 2 by typing:
adb sideload update.zip
-Now the update will start and this will take some time.
Hope it helped[emoji106]
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
Hey dude, thanks for the help! So I went through these steps and it actually appeared to sideload and update properly.
However now it looks as though my phone is stuck at the one+ logo when I go to boot the OS.
colinbest2 said:
Hey dude, thanks for the help! So I went through these steps and it actually appeared to sideload and update properly.
However now it looks as though my phone is stuck at the one+ logo when I go to boot the OS.
Click to expand...
Click to collapse
Try this one :
https://s3.amazonaws.com/oxygenos.o...4_OTA_019_all_1606041303_bd42fc5cc5cc4ab2.zip
If still stuck on boot logo, boot in fastboot, connect to PC and run command : fastboot erase userdata
If not work try sideload a rom u have with same steps[emoji4]
Sent from my ONE A2005 using Tapatalk