Related
So I've installed a custom ClockworkMod recovery and ROM on my Nexus 7 tablet. Life was good. Recently, I was running out of space and decided to delete my CWM backup (after saving it to my computer). And then, I realized I couldn't.
I went into ES File Explorer to try. I couldn't do it there.
I went into the ADB shell as root to try to remove it. No luck again, just the message when I finally DID try to remove one file:
Code:
# rm boot.img
rm failed for boot.img, Operation not permitted
What am I doing wrong?
Edit: This looks like it's ClockWorkMod (5.8.??)'s fault, but besides reading that another backup won't make the current one much larger, I don't actually know how to delete the current one.
Try "rm -rf ddd" (where "ddd" is the directory name) on the directory containing the files.
Sent from my Nexus 7
BillGoss said:
Try "rm -rf ddd" (where "ddd" is the directory name) on the directory containing the files.
Sent from my Nexus 7
Click to expand...
Click to collapse
in the development section there is a cwm flashable.zip that will delete them.. Then upgrade to latest cwm or TWRP.. its a bug from older version of cwm.. its talked about in the dev cwm thread..
good luck..
I did this in a way not mentioned here that still deserves mentioning... First I updated to the latest version of CWM available (via the Nexus 7 Toolkit) and then booted into recovery, opened the backup option, deleted the backup that was there, then cleaned the nandroids.
I could not find the aforementioned flashable zip, and because of the new CWM I had, I wanted to attempt a proper method of removal before running another rm command via the terminal. Therefore I could not verify the other methods mentioned here, my apologies.
erica_renee said:
in the development section there is a cwm flashable.zip that will delete them.. Then upgrade to latest cwm or TWRP.. its a bug from older version of cwm.. its talked about in the dev cwm thread..
good luck..
Click to expand...
Click to collapse
primetechv2 said:
I could not find the aforementioned flashable zip, and because of the new CWM I had, I wanted to attempt a proper method of removal before running another rm command via the terminal. Therefore I could not verify the other methods mentioned here, my apologies.
Click to expand...
Click to collapse
Sorry for re-opening an old thread, but I am having a problem where I have files that I cannot delete from the clockworkmods/blobs folder on my external sd card. So far, I have tried deleting them from a file explorer, deleting them as root from a file explorer, root and non-root deletes from terminal emulator, deleting through windows, adb shell deletes (with system booted).
I also wanted to try adb shell while booted into cwm, but I could not get the adb connection to work from recovery.
I also tried to find the zip file in the developer section and that's the real reason why I revived this thread...Does anyone know where the thread is with the zip file to remove these files?
I think the only way to delete them is through cwm.Boot to recovery and use the menu to delete them.
Sent from my SGH-I927 using xda app-developers app
Kodiack99 said:
I think the only way to delete them is through cwm.Boot to recovery and use the menu to delete them.
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
When I booted to recovery, I am able to delete each of the backups that I created. These all deleted correctly. I then went to Free unused backup files (to delete the files/folders in the blobs folder) and ran that and most of the files are gone. When I boot back into the phone, there are still some files/folders there and they seem to be taking up about 4-5 GB on the card. When I try to delete them through the file manager apps (either as root or not) they will not delete and the manager reports an error (before clicking delete, the manager displays a statistics report that says that the size of the files are over 2TB so obviously something is very messed up about them). I have also tried to delete them through the terminal (again as root and regular user) and they will not delete there either and they totally mess up the terminal window with unprintable characters (the only way to recover is to exit out of the current window and start a new one).
I finally fixed this problem last night by backing up all of my stuff (except the clockworkmod folder) to my computer. I then rebooted into recovery (latest version of CWM non-touch) and formatting the ext SD Card. When I rebooted there were still some folders there (including the clockworkmod folder). I did a format from within the OS and that cleared everything out. I copied all of my stuff back from my computer and I'm now good to go. Not sure how it got messed up to begin with, but the problem is fixed now. I think I'm going to stick with TWRP from now on.
Flashed a rooted stock Android 4.2 ROM, root appeared to be broken so i figured rather than be late for work i'd flash my nandroid backup i did beforehand. Now recovery can't find the backup location, and under any file explorer it appears as '0' which i have to select first to view the files. Because of this CWM can't see the backup folder. HELP
That's because of the 4.2 multi-user feature, it needs to separate files of multiple users somehow, so it just moves all your files to "0" subdirectory. If you add another users, they will have their own folders.
It should be okay to just move /data/media/0/TWRP to /data/media/TWRP, either via TWRP's file manager or via adb shell while in recovery:
Code:
mv /data/media/0/TWRP /data/media/
Tasssadar said:
That's because of the 4.2 multi-user feature, it needs to separate files of multiple users somehow, so it just moves all your files to "0" subdirectory. If you add another users, they will have their own folders.
It should be okay to just move /data/media/0/TWRP to /data/media/TWRP, either via TWRP's file manager or via adb shell while in recovery:
Code:
mv /data/media/0/TWRP /data/media/
Click to expand...
Click to collapse
Thank you for your help but I'm using clockworkmod recovery. What do i need to change in that command to suit CWM?
Matty Matt said:
Flashed a rooted stock Android 4.2 ROM, root appeared to be broken so i figured rather than be late for work i'd flash my nandroid backup i did beforehand. Now recovery can't find the backup location, and under any file explorer it appears as '0' which i have to select first to view the files. Because of this CWM can't see the backup folder. HELP
Click to expand...
Click to collapse
Haha, I thought I was the only one! I thought I had partitioned my card somehow. I basically did the same thing as you. I also am running CWM. Its making Rom flashing almost impossible for me, I can only select & flash files from the SD "O". All my nandroids are on the regular SD selection. Did you ever find you answer Matt.?
Sent from my Nexus 7 using Tapatalk 2
Hello,
I don't know if you noticed but JCSullins made a new cwm6 based recovery.
If you want to give it a try I've made a cwm flashable update archive,
**Removed - wait for JCSullins official release**
menthe said:
Hello,
I don't know if you noticed but JCSullins made a new cwm6 based recovery.
If you want to give it a try I've made a cwm flashable update archive,
https://www.dropbox.com/s/hzxb7fswws5l0ss/update-cwm6_tenderloin-20121204.zip
Click to expand...
Click to collapse
For those not in the know, it is recommended to update your recovery and essential if you plan to update to cm10. This fixes s file system corruption bug that shows up when expanding the partition in preparation for cm10.
Sent from my HP TouchPad using Tapatalk 2
menthe said:
Hello,
I don't know if you noticed but JCSullins made a new cwm6 based recovery.
If you want to give it a try I've made a cwm flashable update archive,
https://www.dropbox.com/s/hzxb7fswws5l0ss/update-cwm6_tenderloin-20121204.zip
Click to expand...
Click to collapse
Thanks for your installable zip! I had been trying to get things updated and couldn't get the uImage written to the /boot dir on my TP.
Went through adb (reinstalling drivers, connecting,etc.) then tried renaming and copying to /boot through ES File explorer with SU permissions, but it still wouldn't let me write to the /boot folder. I'm not quite sure why - I thought SU permissions allowed me to write to the /boot folder, but I guess not... I'll have to further investigate. I'm still noobish on quite a lot here.
Needless to say, your zip file helped and was finally able to get CWM6 updated on my TP. Thanks button pressed! :good:
"Went through adb (reinstalling drivers, connecting,etc.) then tried renaming and copying to /boot through ES File explorer with SU permissions, but it still wouldn't let me write to the /boot folder. I'm not quite sure why - I thought SU permissions allowed me to write to the /boot folder, but I guess not... I'll have to further investigate. I'm still noobish on quite a lot here."
Click to expand...
Click to collapse
Open terminal
type
su
umount -o remount,rw /boot
then use es file explorer.
chadster1976 said:
Thanks for your installable zip! I had been trying to get things updated and couldn't get the uImage written to the /boot dir on my TP.
Went through adb (reinstalling drivers, connecting,etc.) then tried renaming and copying to /boot through ES File explorer with SU permissions, but it still wouldn't let me write to the /boot folder. I'm not quite sure why - I thought SU permissions allowed me to write to the /boot folder, but I guess not... I'll have to further investigate. I'm still noobish on quite a lot here.
Needless to say, your zip file helped and was finally able to get CWM6 updated on my TP. Thanks button pressed! :good:
Click to expand...
Click to collapse
Rom Toolbox lite will allow you to .
*sigh*
"... At this point I'm just putting out a uImage to allow those who are
comfortable swapping out the uImage to test." (less than 24 hrs ago on rootzwiki)
I was hoping to get some feedback from the "more advanced" users testing this before creating an
installable zip and unleashing it on everyone. So far, virtually no feedback.
I flashed it and now I'm soft bricked. Can't boot into sk8's CWR6, CM10 or anything.
Lesson learned, ask developers before posting there work
Sent from my Galaxy Nexus using xda app-developers app
It likely not the CWM6 that did it but the boot partition full. If you have an extra webos kernel, some moboot themes, TWRP, and then this new larger uImage for CWM you will likely run out of space.
Probably should put that warning here it's pretty important people realize it and/or add a script to remove TWRP, to prevent issues with this zip.
@jcsullins +1 Feedback. Installed your CWM uImage manually. Mounted as mass storage in CWM, copied files, Installed latest CM10 12/05(over older CM10 installed with Acme3), Installed Gapps, Installed Camera Preview 3 patch, Installed WEBCM10, cleared both caches in CWM and noticed no issues during all the processes.
I ACMEU wiped and ACME3'd the whole deal back on w/new recovery. It needed the clean up anyways and I had a NAND from yesterday.
Nice, thanks JC.
Roland Makes oopsy
jcsullins said:
*sigh*
"... At this point I'm just putting out a uImage to allow those who are
comfortable swapping out the uImage to test." (less than 24 hrs ago on rootzwiki)
I was hoping to get some feedback from the "more advanced" users testing this before creating an
installable zip and unleashing it on everyone. So far, virtually no feedback.
Click to expand...
Click to collapse
Thank you for taking the time to create this great new CWM6. I have been really enjoying the new looks and graphics. I have tested flashing different zips and Roms. I have made and restored Nandroid backups and even restored older CWM5 backups with CWM6. I do this to try and help but sometimes I really step in $#@# trying to help, like with the 4.2gapps.
Sorry about being so anxious to get this out to the public. I have had a lot of complaints about Bricked TouchPads and would like to get the word out about the problem and how to fix/prevent it.
I feel very responsible for the people affected due to me making an install video without knowledge of the corruption issue beforehand.
I wanted to make a video explaining that there was an issue but to fix it they can, Backup, uninstall, reinstall and restore. To prevent future issues I want to included this in my install instructions. They would of course need your New CWM6 to do this and I have been eagerly awaiting this fix.
Sorry about all my stupid mistakes, I get a bit over excited about Tech stuff at times. Please accept my sincerest apologies.
jcsullins said:
*sigh*
"... At this point I'm just putting out a uImage to allow those who are
comfortable swapping out the uImage to test." (less than 24 hrs ago on rootzwiki)
I was hoping to get some feedback from the "more advanced" users testing this before creating an
installable zip and unleashing it on everyone. So far, virtually no feedback.
Click to expand...
Click to collapse
I'm sorry, but I didn't see your post in Rootzwiki or I would have posted there.
This cwm has worked flawlessly. I haven't had a chance to try all the new features, but the ones I did try worked fine.
Thanks so much for this. The old 5.0.2.6 was starting to show its age. I hope this cwm does away with the sporadic partitioning problems I'd been seeing.
jcsullins said:
*sigh*
"... At this point I'm just putting out a uImage to allow those who are
comfortable swapping out the uImage to test." (less than 24 hrs ago on rootzwiki)
I was hoping to get some feedback from the "more advanced" users testing this before creating an
installable zip and unleashing it on everyone. So far, virtually no feedback.
Click to expand...
Click to collapse
In my limited testing to this point, I've not uncovered any issues. I flashed a couple of different roms, gapps and misc zipfiles and all were fine. I also made a nandroid and a subsequent restore which also worked fine.
I like the idea that that the default backup method was tar as opposed to dup, as I am more comfortable with that. Also, was pleasantly surprised to find that USB storage mount was working, I thought that this was "broken" in CWM 6.x. I transferred files back & forth on my PC with no problem.
The only oddity I came across was when trying to view the files in my nandroid backup folder in ES File Explorer, or the stock CM File Manager, the 2 android_secure.vfat.tar files were not visible. Yet they were visible in Root Explorer and of course, when I transferred it over to my PC for safekeeping, they were there.
That's about it for now. Great job as always, JC. Thanks.
Mike T
New Backup Options
I am just trying some of the new backup options. It seems that we have a choice in the backup we make now, the Default is Tar and the 2nd option is Dup. There is also a "free unused backup data" option, since the backups appears to be in several files. I wanted to backup my backups but I am in over my head here and don't know much about the new backup options. Has anyone else had a chance to take a look? I like the spinning ball animation in the Androids stomach while I make and restore my backups:good: I can use my old CWM5 backups but now I don't know what to do about the new ones. Could anyone more experienced help me out please:fingers-crossed:
webdroidmt said:
In my limited testing to this point, I've not uncovered any issues. I flashed a couple of different roms, gapps and misc zipfiles and all were fine. I also made a nandroid and a subsequent restore which also worked fine.
I like the idea that that the default backup method was tar as opposed to dup, as I am more comfortable with that. Also, was pleasantly surprised to find that USB storage mount was working, I thought that this was "broken" in CWM 6.x. I transferred files back & forth on my PC with no problem.
The only oddity I came across was when trying to view the files in my nandroid backup folder in ES File Explorer, or the stock CM File Manager, the 2 android_secure.vfat.tar files were not visible. Yet they were visible in Root Explorer and of course, when I transferred it over to my PC for safekeeping, they were there.
That's about it for now. Great job as always, JC. Thanks.
Mike T
Click to expand...
Click to collapse
I was having the same issues trying to view the files from ES File Explorer, and from the PC. I feel like such a noob
RolandDeschain79 said:
I am just trying some of the new backup options. It seems that we have a choice in the backup we make now, the Default is Tar and the 2nd option is Dup. There is also a "free unused backup data" option, since the backups appears to be in several files. I wanted to backup my backups but I am in over my head here and don't know much about the new backup options. Has anyone else had a chance to take a look? I like the spinning ball animation in the Androids stomach while I make and restore my backups:good: I can use my old CWM5 backups but now I don't know what to do about the new ones. Could anyone more experienced help me out please:fingers-crossed:
I was having the same issues trying to view the files from ES File Explorer, and from the PC. I feel like such a noob
Click to expand...
Click to collapse
Hi Roland, hope all is well with you. I am not having a problem viewing my nandroid files on my PC, just from the apps I mentioned within Android.
Anyway, just a quick blurb on the 2 backup methods of .tar & .dup. Tar is what we are used to with the older CWM version, .dup is something new to CWM and fairly similar to the way a windows PC does backups. I'm no expert but in a nutshell, .tar backs up everthing each time you do a nandroid, .dup does incremental backups each time and stores the data in "blob" files which become very large. With the .dup method, because it's only doing incremental, backup time is faster than .tar but with the large "blob" folders of data, it's a PITA to move to your PC for safekeeping.
With all the flashing I do, I'm constantly moving nandroids back & forth, so I prefer .tar at this time. But as usual, YMMV. Take care.
Mike T
.dup & .tar enlightenment
webdroidmt said:
Hi Roland, hope all is well with you. I am not having a problem viewing my nandroid files on my PC, just from the apps I mentioned within Android.
Anyway, just a quick blurb on the 2 backup methods of .tar & .dup. Tar is what we are used to with the older CWM version, .dup is something new to CWM and fairly similar to the way a windows PC does backups. I'm no expert but in a nutshell, .tar backs up everthing each time you do a nandroid, .dup does incremental backups each time and stores the data in "blob" files which become very large. With the .dup method, because it's only doing incremental, backup time is faster than .tar but with the large "blob" folders of data, it's a PITA to move to your PC for safekeeping.
With all the flashing I do, I'm constantly moving nandroids back & forth, so I prefer .tar at this time. But as usual, YMMV. Take care.
Mike T
Click to expand...
Click to collapse
Thank you very much for the detailed response. I’m feeling good now that I am starting to understand the new recovery. I also really liked having those individual .tar backups:good:, I made one for each version of CM. I wonder how .dup backups will affect the free space on my device. I also backup a lot but I did find that i was able to restore the older CWM5 backups without a problem. I will probably just keep the older CWM5 .tars for CM7, CM9 and do my CM10 backing up with the newer .dup. Time to transfer some backups:victory:
Can we maybe get rid of the link in op? Jc has stated this was only for testing, you shouldn't host a devs work without permission, and maybe for the fact of it will soft brick a TP? Just saying....
Sent from my HTC VLE_U using xda app-developers app
Sorry for possibly misunderstanding but is it recommended to use this yet due to possible corruption issues with older versions of CWM or only intended for testing atm? I've been meaning to ACME uninstall the TP and reinstall CM10 clean again and if this newer version of recovery is recommended for flashing I'll throw it on there while I'm at it
Thx JCSullins! :fingers-crossed:
jcsullins said:
*sigh*
"... At this point I'm just putting out a uImage to allow those who are
comfortable swapping out the uImage to test." (less than 24 hrs ago on rootzwiki)
I was hoping to get some feedback from the "more advanced" users testing this before creating an
installable zip and unleashing it on everyone. So far, virtually no feedback.
Click to expand...
Click to collapse
Hello,
Sorry for that :/
I haven't seen your rootzwiki post and so far I was just willing to help users to install it
easily (seems that was my mistake :x) because after I gave it a try it solved the issues
I was having with the previous CWM one. There is just one thing that disturb me, in
Backup and Restore menu, 'choose backup format' should be rename in something like
"choose default backup format".
That's just my 2cents and besides this all functions work well, thanks for your hard work.
I'll remove the link from the OP post and wait for your public release
Sincerely, menthe.
Has anyone tried the adb sideload yet?
When attempting to sideload I get: * failed to write data 'protocol fault (no status)' *
Any other adb commands I issue are met with "error:closed"
I am stuck here because I don't have a power button to do a hard reset... please someone tell me this function is working and I am just doing something wrong. My TP has a full charge and I don't feel like waiting 8hrs for it to die so it can be reset.
Edit: just took the whole thing apart and pulled the battery
Trying to restore a NAND in CWM but it says "couldn't find directory, no files found" when I click "restore"
So i did a backup, and it shows up when I then hit "restore" in sdcard/clockworkmod/backup (listed at top of recovery screen) but when I boot and look on my sdcard, it shows the old backups I made in the folder listed, not the one I just made. I can't find the one I just made, even though if I reboot into recovery, it still shows it (the latest) and only it.
Any idea where the newest one is, and why I cant restore the older ones?
Are you running CWM 6.0.1.9?
Also, take a look at http://forum.xda-developers.com/showthread.php?t=1991657.
I am running v6.0.1.9 and the link you posted seems to say that this should be an issue resolved with this version. Though it did tell where to find the new backup.
It lists some adb commands to move the old backups to the new directory, can I just do that in rootexplorer with copy/paste?
TheAtheistReverend said:
I am running v6.0.1.9 and the link you posted seems to say that this should be an issue resolved with this version. Though it did tell where to find the new backup.
It lists some adb commands to move the old backups to the new directory, can I just do that in rootexplorer with copy/paste?
Click to expand...
Click to collapse
I don't see why you couldn't move the files with rootexplorer. Give it a try!
They moved fine
They are seen by recovery, and now I just switched to TeamWin recovery. We'll see if that sees them too.
Are we confident that wiping doesn't clear this location? I'm a little worried that a factory reset or something might wipe the data folder
TheAtheistReverend said:
They moved fine
They are seen by recovery, and now I just switched to TeamWin recovery. We'll see if that sees them too.
Are we confident that wiping doesn't clear this location? I'm a little worried that a factory reset or something might wipe the data folder
Click to expand...
Click to collapse
Please read the following
http://forum.xda-developers.com/showthread.php?p=34794673
If you are worried about losing the backups, copy them to your pc or onto OTG storage. I use cwm and my backups are now in /data/media/clockwork. If you activate multi-user, I think they go to /data/media/0/clockwork, but I can't test. Not sure about the TW recovery.
scott_doyland said:
Please read the following
http://forum.xda-developers.com/showthread.php?p=34794673
Click to expand...
Click to collapse
Confusing But the info is there. I don't like how complicated it ahs gotten to wipe, restore, recover, and flash. It used to be so simple...:silly:
EDIT: If you are coming here for the first time, this guide should still work, but @PorygonZRocks has created a flashable zip that should deal with a lot of these issues automatically. You can check out his post here:
https://forum.xda-developers.com/showpost.php?p=75787067&postcount=699
This method will indirectly allow you to root the LG Gpad v410 after it has been upgraded to Lollipop 5.1.1. Yes. Rooting LG v410 Lollipop. It's through a downgrade, but it works.
It took a while to get working, but here's how I did it. The process is straightforward, but the details matter greatly. You will brick your device if you mess up. Please read everything *first* before you do anything. Be sure you understand the process. I'll try to explain what's going on along the way.
An external SD card is extremely helpful for this process. You *could* adb push everything, but that will tedious.
First, you need some files.
The 4.4.2 KDZ which is a TEST OS, but it can be rooted and it downgrades to a Bump'able bootlaoder:
http://forum.xda-developers.com/g-pad-10/general/kdz-lg-g-pad-7-0-v410-t3224867
The LG 2014 Flash Tool:
http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip
Android LG Drivers:
https://www.androidfilehost.com/?fid=24052804347802528
Parted for Android. You can probably find it other places, but I found this file:https://dl.dropboxusercontent.com/u/84115590/LG%20G2%2016GB%20Solution/sdparted-recovery-all-files.zip
EDIT: There seems to be a lot of confusion here. My bad. All you need is the file named "parted" from this zip file - nothing else. Just put that one file in the root of your external SD card.
https://dl.dropboxusercontent.com/u/84115590/LG G2 16GB Solution/sdparted-recovery-all-files.zip linked from here: http://www.**********.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/
EDIT2: The dropbox link is down. I've attached the file directly.
The Candy5 ROM (This will potentially save you some manual steps. Somewhat optional, but highly recommended):
http://forum.xda-developers.com/g-pad-10/development/rom-candy5-g-pad-v410-lollipop-5-1-1-v2-t3111987
Flashify APK:
http://www.apkmirror.com/apk/christian-gollner/flashify/flashify-1-9-1-android-apk-download/
TWRP for the v410:
http://forum.xda-developers.com/g-pad-10/development/recovery-twrp2-8-5-0lgv400-410-t3049568
LG One Click Root:
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
(You may use Purple Drake or whatever else you want. They all use the same root script as this does and the GUI is helpful for novices.)
Android SDK (specifically adb.exe. After installing go to SDK Manager and ensure that Android SDK Platform Tools is checked):
http://developer.android.com/sdk/index.html
For clarification below, when I have commands in "quotes" they are Windows commands. When they are in `backticks` they are commands that you run inside of ADB which actually run on your device....as root. Root can screw things up. Please be extra cautious. If you blame me for messing up your device I will laugh at you. But that's not gonna happen, right? Good. Let's go.
Now that you have everything, put it all into a folder where you can access it easily.
Install the LG Drivers.
Install Android SDK (or otherwise get adb.exe).
Extract all of the archives.
Move the KDZ to the LG Flash Tool 2014 folder.
Put the tablet into Download Mode by powering it off, holding VolUp, and plugging in the USB cable. Press VolUP when instructed. You must be in Download mode before continuing.
Run LGFlashTool2014.exe. Select the KDZ file. Click "CSE Flash". Click "Start". Select "English" and click OK. Do not change anything else.
WAIT for the flash to continue. If you really want to brick your device, here's a good opportunity.
The device will reboot into Android 4.4.2. You will only have 4GB of internal storage at this point. DON'T PANIC! We are fixing it.
Enable USB debugging.
Connect the device.
Install and run LG One Click Root. Wait for the device to be rooted before proceeding.
Copy the Flashify apk, TWRP image, and Candy5 ROM to your external SD card.
Install Flashify and flash TWRP to the recovery partition.
Use the Flashify menu to reboot in to recovery.
DON'T PANIC! You will get white vertical lines on the boot screen from now on. They only show up during boot animations. A small price to pay. This may be fixed at a later date. for the time being! Thanks to marcsoup's first post ever, we have a fix! Details below. PLEASE click this link and thank him!
Things get tricky here. Copy parted to your external SD card and then run "adb shell" from Windows to get a shell in TWRP.
In TWRP, unmount /data by tapping Mount > uncheck Data.
`cp /sdcard/parted /sbin/` This copies the parted binary to /sbin so it can be executed in the path. I had trouble running `/sdcard/parted`, but YMMV.
`chmod +x /sbin/parted` Make it executable.
`parted /dev/block/mmcblk0` Run parted against the internal mmc
`p` Prints the partition table.
`rm 34` Deletes partition 34 labeled "grow". This is the root of our problem. The KDZ apparently only creates a 4GB partition, I assume so the test build has maximum compatibility with all sized devices.
`rm 33` Deletes partition 33 "userdata"
`p` Print to verify
`mkpartfs` Create a partition and put a filesystem on it. If we only expand the partition it won't help us because the filesystem is still only 4 GB.
a) name: userdata
b) type: ext2 (the tool only supports ext2. This is ok for now.)
c) start: 3439MB (the end of part 32. IT MAY BE DIFFERENT FOR YOU!) Be sure you do not omit the MB part otherwise the offset will overwrite another critical partition.
d) end: 15.8GB (where "grow" ended above. IT MAY BE DIFFERENT FOR YOU!) Be sure you do not omit the GB part otherwise the offset will overwrite another critical partition.
`p` Verify. For me it did not name the partition properly. Gotta fix that.
(if necessary) `name 33 userdata` This is critical for mount to find it in /dev/block/platform/msm.sdcc.1/by-name/ on some/all ROMS.
`p`. Verify one last time. Compare it to my partition table in the attachments. If you want to brick, delete some random partitions here.
Flash Candy5 with TWRP. It's only 239 MB, so it will flash quickly. I do this because Candy5 will reformat mmcblk0p33 from ext2 to ext4 for you. It does this as part of it's system boot, apparently. If you install a different ROM that does not do this, you can reformat it by running `make_ext4fs /dev/block/mmcblk0p33`. If your ROM does not have make_ext4, it likely has some differnt method to make an EXT4 filesystem. `/system/bin/mke2fs -t ext4 /dev/block/mmcblk0p33` may work better. Just flash Candy5 and be done with it.
Tap Wipe > Swipe to Factory Reset.
Tap Reboot > System.
WAIT!!! It will take a minute for the ROM to start the first time. You will have white lines and and possibly a white screen. WAIT. It's moving the DEX files to cache, formatting a partition, creating default folders on the internal storage, and several other things. WAIT! When the screen goes dim or turns off then it's ready.
Cycle the display or turn it on. You should be at the Candy5 lock screen.
USB debugging is on by default. Run "adb shell".
`mount | grep userdata` Make sure mmcblk0p33 is mounted.
`df` Make sure /data is 11.3 GB (or whatever size it is on non-16GB devices).
HELL YEAH, you downgraded, rooted, and fixed the partition problem. Enjoy your tablet!
Thanks to dopekid313 for finding the KDZ.
Thanks to timmytim for Candy5.
Thanks to the creators of the root script, flashify, TWRP, and XDA for being so awesome.
Thanks to marcsoup for fixing a fix to the white lines.
Thanks to navin56 for the partition dumps. PLEASE thank his post!
White lines fix.
What we are going to do is flash the aboot partition with the stock image provided by navin56. I've removed the extra files from the dump, so simply download aboot.img.7z below. Unzip it using 7zip.
These commands are to be run in TWRP. Reboot to TWRP recovery and connect with "adb shell". All of the following commands will be run in ADB under TWRP. If you cannot figure out how to get here, please post in the thread and someone will help you. Onward:
If you do everything correctly then you don't have to reflash your ROM and you won't lose data. This process can be done any time after flashing the KDZ, even before you follow the steps above to resize the userdata partition. It's a completely separate process.
Unzip aboot.img.7z so you have the file named aboot.img. You should also make sure that aboot.img's MD5 sum is e97431a14d1cee3e9edba513be8e2b52. Do not flash the 7z file. Please.
Copy aboot.img to your external SD card. It should live at /sdcard/aboot.img
Boot to TWRP and run "adb shell"
`ls -al /dev/block/platform/msm_sdcc.1/by-name/` Let's make sure we are flashing the right partition. On my device "aboot" is /dev/block/mmcblk0p6. You should verify this on your device or you WILL brick your tablet.
`dd if=/dev/block/mmcblk0p6 of=/sdcard/aboot-fukt.img` Let's back up our current aboot partition before we go flashing things just in case there are unintended consequences later. Be sure you have the same partition that "aboot" referred to in the 4th step or you have just backed up the wrong partition.
`dd if=/sdcard/aboot.img of=/dev/block/mmcblk0p6` Be sure the file exists, is the correct aboot.img, and you are flashing the right partition. You have been warned!!
Reboot TWRP and enjoy your boot animations again.
If I missed anything, please let me know. As far as I know this is the very first tutorial that details what is necessary to accomplish this. Please hit the Thanks button on every thread that you visit to download files!
FAQ:
Q: Why do I only have 11.3 GB of space when my device is 16GB?
A: The entire internal SD card (eMMC) is 16 GB. Gotta have someplace to install the bootloader, recovery, android, the modem OS, the secondary bootloader, the cache, the resource and power manager, and all of the other partitions necessary for the table to operate. Please look at the second screenshot in the OP. All of those 33 partitions take up room on the internal card. Fortunately ALL of those partitions ONLY take up about 4.4 GB. Hence the 'userdata' partition is ~11.3 GB.
If anyone wants to use my work to create a flashable zip to make it easier for novices, please do so. My problem is solved and I don't have the time to create the zip. Please post any questions and I'll gladly answer them! I'm so stoked that we have a usable downgrade method now!
Thank You, Worked Great
Thanks for making this I was gonna do it but was to lazy lol and thanks for linking my thread and giving cred instead of just linking straight to the kdz thank you
grandamle91 said:
Thank You, Worked Great
Click to expand...
Click to collapse
Glad to be of help!
dopekid313 said:
Thanks for making this I was gonna do it but was to lazy lol and thanks for linking my thread and giving cred instead of just linking straight to the kdz thank you
Click to expand...
Click to collapse
Of course! If you hadn't obtained the firmware then we'd all still be looking for a solution. It pisses me off to no end when people try to take credit for other people's work. We all just need to realize and acknowledge that we are simply standing on the shoulders of those who did the work necessary for each of us to do our work.
I just noticed since we formatted the userdata it screws up TWRP. It won't mount Data and it says the settings are corrupted
grandamle91 said:
I just noticed since we formatted the userdata it screws up TWRP. It won't mount Data and it says the settings are corrupted
Click to expand...
Click to collapse
Is this after you've rebooted into Candy5 and the partition is reformatted as ext4 (or you've done so manually)? TWRP may not be able to mount an ext2 partition.
EDIT: I just tested this. Following my instructions and flashing to Candy5, TWRP sees mmcblk0p33 (userdata) as the full size and mounts it at /emmc.
For clarification, after you run the parted commands, it will mess with the partition table and TWRP will most likely not be able to see it to remount it - at least not until after a reboot. This is why you need an external SD card from which to install ROMs.
/data not mounted
Edit: nevermind. The partition 33 was still ext2. I had to run make_ext4fs /dev/block/mmcblk0p33 and now I am able to mount /data. Thanks.
Thanks for taking the time to help us.
I followed the steps and till 33 I am good. But once I am in Candy5, I am not able to adb shell (adb not recognizing device eventhough usb debugging is on). I rebooted to recovery and adb works there. But my /data partition is not enabled in TWRP. I am not able to check it either under Mount in TWRP.
Code:
mount | grep userdata
is empty
Code:
df
does not show data
I tried this and my tablet bootlooped. I was able to get into fastboot and restore. I would GREATLY appreciate it if someone who has the time, would kindly donate their valuable time to into making an exe zip or something.
gridironbear said:
I tried this and my tablet bootlooped. I was able to get into fastboot and restore. I would GREATLY appreciate it if someone who has the time, would kindly donate their valuable time to into making an exe zip or something.
Click to expand...
Click to collapse
At what point did it bootloop? What was the last step that you took before rebooting?
Zip
I would really appreciate a zip file as I have never been savvy with adb and for whatever reason it doesn't want to work on Windows 10.
drumm3rb0y said:
I would really appreciate a zip file as I have never been savvy with adb and for whatever reason it doesn't want to work on Windows 10.
Click to expand...
Click to collapse
A zip file for what part? The only part that requires ADB directly is to fix the internal storage. You absolutely have to flash the KDZ and then root before you can do anything. If you are on 5.x then you have no possible way to root, much less flash a zip file.
If you tell me what exactly you are having issues with I will try to help.
fatbas202 said:
A zip file for what part? The only part that requires ADB directly is to fix the internal storage. You absolutely have to flash the KDZ and then root before you can do anything. If you are on 5.x then you have no possible way to root, much less flash a zip file.
If you tell me what exactly you are having issues with I will try to help.
Click to expand...
Click to collapse
The adb part is the part im having issue with. Everything else is flashed already. I was wondering if you could make a zip for the adb part so I can just flash it through twrp.
thanks for the great help. it did work perfectly to regain the lost space.
what about white lines ? is there any solution for that problem ?
I have tried flashing back stock recovery extracted from kdz, dd' but didn't help.
Now i am thinking of flashing back the aboot.bin extracted from original kdz or i can dump ".img" from another working device. (i have 4 similar devices)
what is your opinion i m not a developer and i need your advise. should i go ahead and which partition should i dd ? aboot or abootb or boot ?
regards
shahidmianoor said:
thanks for the great help. it did work perfectly to regain the lost space.
what about white lines ? is there any solution for that problem ?
I have tried flashing back stock recovery extracted from kdz, dd' but didn't help.
Now i am thinking of flashing back the aboot.bin extracted from original kdz or i can dump ".img" from another working device. (i have 4 similar devices)
what is your opinion i m not a developer and i need your advise. should i go ahead and which partition should i dd ? aboot or abootb or boot ?
regards
Click to expand...
Click to collapse
I have no solid evidence of this, but I suspect that the white lines are caused by a display driver issue where when the bootloader hands over control of the display to the kernel it doesn't get reinitialized properly. I have no ideas as to how to get rid of that at the moment but if I stumble across something I'll be sure to post here.
While I'm not an Android developer, I've been a Linux admin for 10+ years and have a lot of experience with Android devices. I'd be really hesitant to go flashing things ad hoc. While Download Mode may save you if you flash the wrong thing, I'm not entirely sure what the limitations that you may run in to with a locked bootloader are.
After having this device for months on 5.x and FINALLY being able to downgrade and run custom ROMs with root, not seeing a boot animation is a pittance to pay. But I'll keep looking.
i have same problem entered in TWRP but when ADB sheel thorough DP tools it didn't connect to my device. i m also using windows 10
Do I need to Re-mount Data ? I press format data button at TWRP and mount data. It looks work great.
After all process, it shows 16Gb total at storage, 11.04GB available. it works perfectly.
I need the stock V41010d, so I reflash the stock rom rooted at [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2 | Rooted + Busybox
Now, my Gpad is at stock V41010d, but I have a question about the boot screen, is it still with white lines and white screen? Any method to fix it?
Hello,
Thanks for the great work. unfortunately I am facing some difficulty, starting from step# 16 "Things get tricky here", how to run"adb shell in TWRP?
also can I use minimal_adb_fastboot_v1.1.3_setup.exe as mentioned in the link in the OP http://www.droidviews.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/ ?
also I noticed the path have been used includes 'parted' folder, but the folder I have after unzipping the parted zip called 'sdparted-recovery-all-files', do I rename the folder to 'parted' instead?
please help and excuse my broken English.
I'm also having trouble with the adb shell step. When my device is powered on normally, adb commands work. However, in TWRP mode my computer can't recognize the tablet, mount properly, and copy over parted. All the steps have been identical to this point. Any ideas?
iphone5sf said:
Do I need to Re-mount Data ? I press format data button at TWRP and mount data. It looks work great.
After all process, it shows 16Gb total at storage, 11.04GB available. it works perfectly.
I need the stock V41010d, so I reflash the stock rom rooted at [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2 | Rooted + Busybox
Now, my Gpad is at stock V41010d, but I have a question about the boot screen, is it still with white lines and white screen? Any method to fix it?
Click to expand...
Click to collapse
You shouldn't need to remount or format data. The parted command nukes the filesystem and creates a new one formatted as ext2. At this point the running kernel has the old partition table loaded and won't know that the partition has been extended. Simply flash Candy5 and reboot at this point and it will reformat the userdata partition.
See above for the white lines during the boot animation. Known issue, no fix in sight, doesn't really matter.
nmnm4alll said:
Hello,
Thanks for the great work. unfortunately I am facing some difficulty, starting from step# 16 "Things get tricky here", how to run"adb shell in TWRP?
also can I use minimal_adb_fastboot_v1.1.3_setup.exe as mentioned in the link in the OP http://www.droidviews.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/ ?
also I noticed the path have been used includes 'parted' folder, but the folder I have after unzipping the parted zip called 'sdparted-recovery-all-files', do I rename the folder to 'parted' instead?
please help and excuse my broken English.
Click to expand...
Click to collapse
You only need the sdparted-recover-all-files.zip from that site. "parted" is not a folder, but the binary (without a file extension) inside of that zip file. Copy that file to /sbin and you are in business.
zmali1 said:
i have same problem entered in TWRP but when ADB sheel thorough DP tools it didn't connect to my device. i m also using windows 10
Click to expand...
Click to collapse
summonholmes said:
I'm also having trouble with the adb shell step. When my device is powered on normally, adb commands work. However, in TWRP mode my computer can't recognize the tablet, mount properly, and copy over parted. All the steps have been identical to this point. Any ideas?
Click to expand...
Click to collapse
I'd recommend installing the SDK and pulling the drivers from that. Alternatively, you can try the drivers here: https://github.com/koush/UniversalAdbDriver.
Technically, when I ran the "parted" commands I was actually booted in to rooted 4.4.2 from the KDZ; I wasn't actually in TWRP. It's just not a very recommended way of going about it. I explained how to run all of this from TWRP, but there's no technical reason that you *can't* run this from Android. You just *shouldn't* because you can't cleanly unmount the filesystem and it theoretically could cause filesystem corruption. I just figured that I don't care about that partition getting corrupted since it's getting wiped out.