Well nobody starts a proper cm10 thread.CM already exists for our device, so just a few links with the proper files and a small installation guide. I hope someone from cm team to open the official thread.
First of all its your responsibility if you brick your device
Here you can see upcoming changes and link for our device http://changelog.bbqdroid.org/#n7100/cm10/next
1. Download from here latest build http://get.cm/?device=n7100
2. Download from here latest gapps http://goo.im/gapps/gapps-jb-20121011-signed.zip
and here the add with picasa http://goo.im/gapps/gapps-jb-picasa-20121011-signed.zip (you will loose cm features in camera)
3. Make sure that you have custom recovery (eg cwm)
4. Put both zip files in your sdcard (take care because cm does not support exfat format, so make sure you have fat32 format in your extsdcard)
5. Boot in custom recovery
6. Install zip from sdcard
7. Select the cm-10-xxxxxxxx-NIGHTLY-n7100.zip
8. Install zip from sdcard
9. Select the gapps-jb-20121011-signed.zip
10. Wipe cache
11. Wipe data/factory reset
12. Advanced-wipe dalvik cache
13. Reboot
Enjoy!
Few screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
edit: ipguy already has a thread, so he can take the guide from here, and mods you can close this thread.Up to you!
AWESOME!!!!
well done m8
minibic FOR
Thanks I was just looking for it...look promising
Related
DISCLAIMER:
Rooting your phone and using custom Recoveries and ROMS have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledges about phones and phones utilities too.
Make sure that whatever you do, you are doing it at your own responsibility.
Version 3.0 first release (11-dec-2014):
- based on cwm (cwm 6.0.5.1) and added improvements on top.
- bottom virtual navigation keys, to compensate the non-function of swipe in some phones
- a new advanced backup/restore menu
- separate power and wipe menu
- aroma file manager integration (you can flash the attached AromaFM_installer.zip in recovery, and that will place the aromafm.zip at its place).
- new GUI images, very light
- some other.
Instructions:
Flash the recovery via sp flash tool (RECOMMENDED)
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Link: CTR 3.0
Credits: @carliv for ctr and his amazing porting guide. :fingers-crossed:
zte redbull v9180
Please where can I download carliv touch recovery that I could port to my device, I am using zte red bull , snapdragon 400 720x1820, thank you
Anyone have S4 value edition ( GT-I9515 ) Custom Roms....????
Bumping threads under 24hrs old is against the rules...you left it an hour
Bump
I9515 custom rom
Hi I own a GT-i9515 and i installed a custom rom "Imperium_LL_Rom_OF2_v9.0 " a great ROM with a lot of customization, wifi and bluetooth works. installed xposed as well. here are the steps (if you are already rooted and on 5.0.1 no need to flash with odin, jump to step 4 ) :
1. Install "I9515XXU1BOE3_I9515OXA1BOE3_I9515XXU1BOE3_HOM E.ta r.md5" using "Odin3_v3.10.6" (if you aren't already @ lollipop 5.x)
2.Reboot then reboot into download mode, to root using "CF-Auto-Root-jfvelte-jfveltexx-gti9515.tar.md5" from here
3.Reboot then reboot into download mode, to instal "twrp-2.8.4.0-I9515" from here
4.Reboot then reboot into recovery mode, make a backup
5.Make an advanced wipe (system, data, dalvik cache, cache)
6.Installed "Imperium_LL_Rom_OF2_v9.0" from here
7.Back to install, install "stock_kernel_patch_tw5" from here
8. Reboot, and everything is working
To install Xposed :
1. Install the "XposedInstaller_3.0-alpha2"
2. Reboot into recovery, and install "xposed-sdk21-arm-20150430-arter97-V4-generic"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how did u do that?
when i install rom + stock kernel phone stopped at animation samsung..:crying::crying:
There is CM12.1 rom in the Android Development section
Hello, this is a port of the crdroid key board for those using a rom that is not crdroid. I ported this for those who would rather have the numbers at the top of the key board.
Change Log: December 2nd:
No longer longer need to delete anything to install keyboard. Just download and flash with TWRP. This is the latest version of the keyboard. This is also universal now as you can use on other devices other than HTC M8. No longer need the instructions wrote below but will leave there for reference just in case someone runs into problems. The zip now is labeled m8universal. Enjoy the keyboard. This will be final unless I find something is not working right. Pie is beta will be coming sometime in the future.
Download Link: https://www.dropbox.com/h#share
Screen shot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Directions: Go to System/App/ LatinIme and open the folder then delete everything in it. Then
reboot into TWRP recovery and flash the zip you downloaded. Now you have the keyboard in the pic.
Download link: https://www.dropbox.com/sh/ok357unryey2zwk/AACF9PbFfdu2G7wrufxiyLwza/crdroidkeyboardno-oreo.zip?dl=0
Side note if you don't delete the contents in the LantinIme folder first you might not have a working keyboard after flashing the zip. In my tests when I deleted the contents in the LatinIme folder first before flashing I had a result of 100 percent working. So follow the directions and everything will work. Its works on some nogout roms and works on all oreo roms when tested. Flash and enjoy your new keyboard.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hexagon v2.6Vietnamese firmware based on LineageOS 14 with the latest and best features from all custom ROMs! DroidVNTeam hopes to be able to bring a completely new experience to Android users. Rooted by Magisk. Port of Doogie T6 pro firmware, Android 7.1.2
Screenshots
Installation via TWRP
Be sure to make a backup in case something goes wrong.
Download the firmware, put it in the root directory of the SD or phone memory.
Reboot your smartphone in recovery mode and wipe: Dalvik / ART Cache, System, Cache, Data.
Go to "Install" and select the firmware from SD or phone memory, start the installation.
Download ROM and TWRP Recovery
Download from Cloud.mail.ru, TWRP
Custom Scatter File for SPFlashTool
Recovery.img TWRP 3.0.2, flash via SPFlashTool
Known troubles and their solutions
If u have some troubles with Bluetooth Audio, try to use Bluetooth fix via TWRP
If maximal main camera resolution up to 8mpix only - try to use 13MPix Camera Fix, TWRP
Reserved
Few questions.
Is the Rom enough stabile to you used is as a daily driver ? Have anyone tried the rom ?
The patches and related files in this article are provided by LightVortex.
With the consent of lightvortex, the Nubia Z11 nx531j Project Treble GSI is described below.
Project Treble is not supported in all roms of Nubia Z11 nx531j, and Project Treble is supported by vendor.img and boot.img provided by lightvortex: vndk28 ARM64 Aonly.
Issue:can't flash GApps,can't flash Permissiver_v4(5),no camera.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.Installation requirements
1).stock rom V2.93 or NX531J_Z69_EN_RSZ0T1JF13M306(please install 304 first.then update to 306)
2).MoKee TWRP3.2.3
2.Installation method
1).Wipe system,cache,dalvik cache
2).Flash Trebleizer-NX531J.zip
3)Flash nx531j_recovery_3.5.2_9-0.img
4)Reboot to recovery
5).Wipe system,vendor,data,cache,dalvik cache
6).Flash vendor.img to vendor partition（Just need to flash in first time. There is no need to flash again when replacing the GSI.）
7).Flash boot.img to boot partition（Just need to flash in first time. There is no need to flash again when replacing the GSI.）
8).Flash GSI.img to system partition
Note:if install android11 GSI.then must Modify the vendor/build.prop,Delete this line in the build.prop file:ro.frp.pst=/dev/block/bootdevice/by-name/frp And grant 0755 permissions（Just need to change in first time. There is no need to change again when replacing the GSI.）
9).Wipe factory reset
10).Reboot and enjoy
P.S. When replacing GSI
1).Wipe system,data,cache,dalvik cache
2).Flash GSI.img to system partition
3).Wipe factory reset
4).Reboot and enjoy
Thanks:
lightvortex
crdrom-v316-220330-arm64-agZ.img
PixelExperience_Plus_arm64-aonly-11.0-20211011-UNOFFICIAL.img
IMG-e-1.7-q-20230113251029-dev-treble_arm64_avN
lir-v316-220325-arm64-agZ.img