Database Users

[How-to]Root Android 4.2.2 And Install CWM v6.0.2.3

Here We have the Root And CWM for Nexus 7 On Android 4.2.2!
Step 1 - Download Android SDK from the Android Developers website and install with USB drivers. See: How to Set Up Android SDK (Fastboot / ADB) on Windows.
Step 2 - Enable USB Debugging mode in your Nexus 7 tablet.
Step 3 - Download Fastboot and extract it in android-sdk-windowsplatform-tools directory. Create directory if not already there.
NOTE: Skip Steps 1, 2, 3 if you already have them.
Step 4 - Download SuperSU v1.04 (UPDATE-SuperSU-v1.04.zip) and copy it to your sdcard on your Nexus 7 tablet.
Step 5 - Make sure you have backup your data as it will be removed. Then switch OFF your Nexus 7.
Step 6 - Download recovery-clockwork-touch-6.0.2.3-grouper.img and copy/paste it in the android-sdk-windowsplatform-tools directory.
Step 7 - Now go into Fastboot Mode on Nexus 7. How? Press Volume Down + UP + Power key for a few seconds till you see some text on the screen.
Step 8 - Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click > Open Command Prompt).
Step 9 - Type in the following command and press Enter.
fastboot flash recovery recovery-clockwork-touch-6.0.2.3-grouper.img
Click to expand...
Click to collapse
Step 10 - Once completed, choose RECOVERY MODE from the Fastboot menu and enter Recovery Mode.
Step 11 - Then scroll down to “flash zip from SD card” and press the Power button to select it.
Step 12 - Press the Power button again and select “choose zip from sdcard”.
Step 13 - Now using your volume keys, navigate to the UPDATE-SuperSU-v1.04.zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 14 - After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. Then Choose yes flash recovery back (this will make CWM your permanent recovery mode)
That’s it. Your Nexus 7 is now rooted on Android 4.2.2 JDQ39 software version of Jelly Bean and even has a custom CWM recovery installed. Check for the SuperSU app in your apps list to verify.
Root and CWM for Nexus 4
Root and CWM for Nexus 10

Reserved...

udimars30 said:
Reserved...
Click to expand...
Click to collapse
Thank you a lot...but the link for the fastboot its not aviable

Nano23 said:
Thank you a lot...but the link for the fastboot its not aviable
Click to expand...
Click to collapse
link updated

and this belongs in original development how? why not post a thread in original development asking about need for speed too..

Step 4 and step 7
I am a little confused about step 4 as I didn't think any nexus 7's had a SD card slot. I purchased mine right from google. I just put the zip file directly on the device itself and I know from my experience with my old Nexus One that this works too, just wondering who is selling the one with SD card slots. My second question, and really the more important one is step 7. I have tried to make the device go into fastboot several times and when I hold the volume keys down, the device boots to a black screen with no ability to do anything after that. If I mess with the power button (meaning I hold it in for a long time then let it out, and do this several times) I can get the device to preform a normal boot. Any thoughts?

thanks
Thanks its worked for my nexus 7..
udimars30 said:
Here We have the Root And CWM for Nexus 7 On Android 4.2.2!
Step 1 - Download Android SDK from the Android Developers website and install with USB drivers. See: How to Set Up Android SDK (Fastboot / ADB) on Windows.
Step 2 - Enable USB Debugging mode in your Nexus 7 tablet.
Step 3 - Download Fastboot and extract it in android-sdk-windowsplatform-tools directory. Create directory if not already there.
NOTE: Skip Steps 1, 2, 3 if you already have them.
Step 4 - Download SuperSU v1.04 (UPDATE-SuperSU-v1.04.zip) and copy it to your sdcard on your Nexus 7 tablet.
Step 5 - Make sure you have backup your data as it will be removed. Then switch OFF your Nexus 7.
Step 6 - Download recovery-clockwork-touch-6.0.2.3-grouper.img and copy/paste it in the android-sdk-windowsplatform-tools directory.
Step 7 - Now go into Fastboot Mode on Nexus 7. How? Press Volume Down + UP + Power key for a few seconds till you see some text on the screen.
Step 8 - Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click > Open Command Prompt).
Step 9 - Type in the following command and press Enter.
Step 10 - Once completed, choose RECOVERY MODE from the Fastboot menu and enter Recovery Mode.
Step 11 - Then scroll down to “flash zip from SD card” and press the Power button to select it.
Step 12 - Press the Power button again and select “choose zip from sdcard”.
Step 13 - Now using your volume keys, navigate to the UPDATE-SuperSU-v1.04.zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 14 - After the installation completes, go to “+++++Go Back” and reboot the phone by selecting “reboot system now” from the recovery menu. Then Choose yes flash recovery back (this will make CWM your permanent recovery mode)
That’s it. Your Nexus 7 is now rooted on Android 4.2.2 JDQ39 software version of Jelly Bean and even has a custom CWM recovery installed. Check for the SuperSU app in your apps list to verify.
Root and CWM for Nexus 4
Root and CWM for Nexus 10
Click to expand...
Click to collapse

Thanks a million man! I was having all kinds of trouble updating to 4.2.2 and finally figured that out. Then I was having problems rooting again until I found this. Your method worked great but I used TWRP instead and it still did the trick. Thanks again.

I tried this but when I want to flash the recovery, my fastboot.exe will then not respond and will try to close. What gives?

Step 7 - Now go into Fastboot Mode on Nexus 7. How? Press Volume Down + UP + Power key for a few seconds till you see some text on the screen.
Click to expand...
Click to collapse
Just a quick note here, to enter Fastboot Mode you just need to turn the Nexus 7 off, then turn on again, soon as you see the Google logo press the Volume Down key and hold (Hold both Power button and Volume Down Key).

No need for holding the power button, the vol down button does the whole trick

worked for me. thanks very much

sicameron32 said:
I am a little confused about step 4 as I didn't think any nexus 7's had a SD card slot. I purchased mine right from google. I just put the zip file directly on the device itself and I know from my experience with my old Nexus One that this works too, just wondering who is selling the one with SD card slots. My second question, and really the more important one is step 7. I have tried to make the device go into fastboot several times and when I hold the volume keys down, the device boots to a black screen with no ability to do anything after that. If I mess with the power button (meaning I hold it in for a long time then let it out, and do this several times) I can get the device to preform a normal boot. Any thoughts?
Click to expand...
Click to collapse
yes you can do that for the normal boot

Spenzert said:
Just a quick note here, to enter Fastboot Mode you just need to turn the Nexus 7 off, then turn on again, soon as you see the Google logo press the Volume Down key and hold (Hold both Power button and Volume Down Key).
Click to expand...
Click to collapse
Thanks..
I don't have N7 that's why did not know!

Leonhan said:
I tried this but when I want to flash the recovery, my fastboot.exe will then not respond and will try to close. What gives?
Click to expand...
Click to collapse
re-install the fastboot with all it's extensions in the same folder!

If you want to use fastboot by a easy way, use this guide you don't need adb line command, just fastboot line command and it's an child game by this way
If you have got a problem with your adb or fastboot or recovery....it's very simply and faster
use this:
Download this file "Fastboot.zip"
Install this file somewhere in one folder which is named "fastboot" on your PC
=> disk C: root
Unzipped this file on the folder "fastboot" and you will find 3 files:
- adb.exe
- AdbWinApi.dll
- fastboot.exe
and when you need to push something by the bootloader, you can use it.
Don't forget to push on this folder the file that you need. For exemple: boot.img or a recovery.img, etc...
The line command is :
Code:
c:\fastboot>
Enter
Code:
c:\fastboot>fastboot flash recovery recovery.img
Enter
If you want to flash the "recovery.img" file
If you want to flash a boot.img:
Code:
c:\fastboot>fastboot flash boot boot.img
******************************************************************
******************************************************************
If you want to know all lines of command
Code:
c:\fastboot>fastboot
Code:
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default: 2048

don´t i have to unlock bootloader first ?

Domx92 said:
don´t i have to unlock bootloader first ?
Click to expand...
Click to collapse
Yes, it is a prerequisite if you want to root your android device.

Ok, so I am running the 4.2.2 update, and after jumping through numerous hoops trying to have my device recognized by adb, I just want to make sure that my very first step should be to boot up in fastboot mode and then issue the following command...
"fastboot oem unlock"
???
Then I can go ahead and proceed to flashing the CWM recovery and flashing the SuperSU file...?
Sent from my SCH-I535 using Tapatalk 2
EDIT: I've tried multiple times, but everytime I boot into "fastboot" mode, which I guess is another way for saying the bootloader, ADB loses its connection with my Nexus 7! Also, if it helps anyone to know, I'm running Win7 64-bit.....I'm not sure if that matters, but the first time I booted up into fastboot mode, my computer recognized it and installed it as an "Android Bootloader Interface" in the Device Manager! When the device boots up normally, ADB does recognize it again, and it also shows up differently in the Device Manager (Android Composite ADB Interface)! ANY help or suggestions would be greatly appreciated, as I obviously can't issue commands to a device that ADB can't see when it's in fastboot mode!

vmancini3 said:
Ok, so I am running the 4.2.2 update, and after jumping through numerous hoops trying to have my device recognized by adb, I just want to make sure that my very first step should be to boot up in fastboot mode and then issue the following command...
"fastboot oem unlock"
???
Then I can go ahead and proceed to flashing the CWM recovery and flashing the SuperSU file...?
Sent from my SCH-I535 using Tapatalk 2
EDIT: I've tried multiple times, but everytime I boot into "fastboot" mode, which I guess is another way for saying the bootloader, ADB loses its connection with my Nexus 7! Also, if it helps anyone to know, I'm running Win7 64-bit.....I'm not sure if that matters, but the first time I booted up into fastboot mode, my computer recognized it and installed it as an "Android Bootloader Interface" in the Device Manager! When the device boots up normally, ADB does recognize it again, and it also shows up differently in the Device Manager (Android Composite ADB Interface)! ANY help or suggestions would be greatly appreciated, as I obviously can't issue commands to a device that ADB can't see when it's in fastboot mode!
Click to expand...
Click to collapse
Hi, vmancini3...
Forget about ADB when your tablet is in FASTBOOT/BOOTLOADER mode...
Here are the salient commands....
Code:
fastboot devices
- should return a serial number to confirm your FASTBOOT connection -
Code:
fastboot oem unlock
- will unlock the BOOTLOADER and will WIPE and FACTORY RESET THE DEVICE; unfortunate, but necessary .
--------------------
With the BOOTLOADER unlocked, begin to set up your Nexus 7 again... as though it was a brand new, just purchased tablet... ie., country, regionalization, WiFi key... etc.
Go online with your Nexus 7 browser (Chrome), and download Chainfire's SU Updater .ZIP package from here...
http://download.chainfire.eu/310/SuperSU/UPDATE-SuperSU-v1.04.zip
Upon completion of this download, shut down the tablet.
--------------------
Reboot again into FASTBOOT/BOOTLOADER mode... VOL down button + POWER ON button.
From your PC, run this command...
Code:
fastboot flash recovery recovery.img
....where the recovery.img is your CWM or TWRP .img file.
Both of which are available here...
CWM - http://www.clockworkmod.com/rommanager
TWRP - http://www.teamw.in/project/twrp2/103
--------------------
Congratulations.... you've just FLASHED a CUSTOM RECOVERY!!!
--------------------
When the self-congratulatory round of self applause has died down, ... and with the Nexus 7 still in FASTBOOT/ BOOTLOADER MODE, use the VOL buttons to navigate and the POWER button to select... reboot into RECOVERY.
Using the new CUSTOM RECOVERY, flash Chainfires SU updater package that you downloaded earlier... usually found in the /download folder...
Done.
Reboot.
Rooted.
--------------------
I really don't understand why some people seem to have a problem with this procedure... it takes less time doing it, than actually describing how to do it.
Rgrds,
Ged.

[guide][no root][manual method][xt1022] how to update moto e - xt1022 to 4.4.4

F0R TH0SE WHO HAVE N0T UNLOCKED B00TLOADER & WHO ARE ON STOCK ROM
Update Via ADB Sideload:
LINK T0 MINIMAL ADB & FASTBOOT > Download
LINK T0 OTA FILE > KITKAT 4.4.4 THX Gogeta
If you have a stock recovery , follow the simple steps below for flashing the update through ADB sideload.
1. Switch off your Moto E device and wait until it is completely turned off.
2. Hold the Volume Dowm button while rebooting the device, you’ll see the fastboot menu and the word start.
3. Press Volume Up a few times until you see the Recovery menu and then press the Power button to enter recovery. You will see an Android logo with a red exclamation mark.
4. Now press Volume Up+Power buttons together, and you should see the recovery menu.
5. Select the 2nd option from the menu called apply update from adb.
6. Now connect the device to the computer with proper drivers on your PC and with the latest ADB installed on it.
7. Now place the downloaded file,
Code:
Blur_Version.20.11.14.condor_retaildsds.retaildsdsall.en.03.zip
in the same directory where you have the adb files
i.e.
Code:
C:\Program Files\Minimal ADB and Fastboot
and hold SHIFT key on your keyboard and RIGHT CLICK and select “Open command window here” (as shown in the below image).
8. Open-command-window-inside-any-folder
Now type or copy/paste the following command in the command prompt to install the Update on your device.
Code:
adb sideload Blur_Version.174.44.1.falcon_umts.AWSRetail.en.US.zip
Now you should see the Update installing on your device after the progress bar in the command prompt reaches 100%.
Once installed, reboot your device from the menu.
That’s all, wait until the device boots and it usually takes some time build cache as the device booting for the first time after the update. Be extremely excited on your new Android 4.4.4 update on your Moto E.

Any modified zip didn't work for me. So, I downgraded to stock, restored recovery, etc and adb sideloaded OTA. Worked fine.

flash twrp don't overwrite stock recovery

today, i flash Los 13 from Los 14. I tried flash twrp by tool,cmd fastboot but recovery is stock. i tried flash MIUI 7.5.4 and i can boot into TWRP 1 time. And now, i dont flash twrp (twrp dont ovewrite stock recovery). i boot into recovery but it's stuck logo Mi 3,4 times and reboot nomal
can anyone help me flash twrp ?
thank

kirianti94 said:
today, i flash Los 13 from Los 14. I tried flash twrp by tool,cmd fastboot but recovery is stock. i tried flash MIUI 7.5.4 and i can boot into TWRP 1 time. And now, i dont flash twrp (twrp dont ovewrite stock recovery). i boot into recovery but it's stuck logo Mi 3,4 times and reboot nomal
can anyone help me flash twrp ?
thank
Click to expand...
Click to collapse
1.- Boot in fastboot mode (power and vol- buttons until the FASTBOOT logo shows up). Connect the phone with USB cable.
2.- Using Windows file explorer, go into the TWRP installer folder, there press and hold the shift key, and right clic the folder. Then click "open command line here".
3.- In the cmd window that opens, write "fastboot devices". Your phone's serial number and the word "fastboot" will appear. If not, the device is not being detected and you need to install the adequate driver. Look in google.
4.- Write "fastboot flash recovery [the name of the TWRP file inside the folder including the .img extension]". Press enter. You will see the output messages in the window, you must not see any error messages.
6.- After flashing the recovery without errors, DON'T REBOOT OR TURN OFF THE PHONE. THIS WILL ERASE TWRP AND INSTALL STOCK RECOVERY AGAIN.
7.- write "fasbtoot boot recovery [the name of the TWRP file inside the folder including the .img extension]". The phone will boot into TWRP
8.- Inside TWRP go to Advanced > Disable DM-verity
9.- Now you can flash custom roms and stuff. To boot into recovery mode power off the phone, press vol+, vol- and power buttons for 3 seconds, then release buttons and wait.
If none of the above works, maybe your bootloader got re-locked after flashing some MIUI ROM and that's why you can't flash TWRP or another ROM.

If the bootloader gets re-locked? We have to ask the permission again? R directly v can unlock using unlock tool? Is der any chances to relock bootloader? By how? Thank u...

thank for help.i flash miui 8.1.1.0 first, fastboot no re-locked ( I checked my status develop option and MI unlocker ). i flash twrp by flour_mo, it dont work but when i flash twrp-caffe 3.0.1 by fedosis ( LOS 13 ) it work. And i can boot into recovery.

moralesnery said:
1.- Boot in fastboot mode (power and vol- buttons until the FASTBOOT logo shows up). Connect the phone with USB cable.
2.- Using Windows file explorer, go into the TWRP installer folder, there press and hold the shift key, and right clic the folder. Then click "open command line here".
3.- In the cmd window that opens, write "fastboot devices". Your phone's serial number and the word "fastboot" will appear. If not, the device is not being detected and you need to install the adequate driver. Look in google.
4.- Write "fastboot flash recovery [the name of the TWRP file inside the folder including the .img extension]". Press enter. You will see the output messages in the window, you must not see any error messages.
6.- After flashing the recovery without errors, DON'T REBOOT OR TURN OFF THE PHONE. THIS WILL ERASE TWRP AND INSTALL STOCK RECOVERY AGAIN.
7.- write "fasbtoot boot recovery [the name of the TWRP file inside the folder including the .img extension]". The phone will boot into TWRP
8.- Inside TWRP go to Advanced > Disable DM-verity
9.- Now you can flash custom roms and stuff. To boot into recovery mode power off the phone, press vol+, vol- and power buttons for 3 seconds, then release buttons and wait.
If none of the above works, maybe your bootloader got re-locked after flashing some MIUI ROM and that's why you can't flash TWRP or another ROM.
Click to expand...
Click to collapse
when I flash twrp.img but it dont overwrite strock recovery ( fastboot was unlocked)

kirianti94 said:
when I flash twrp.img but it dont overwrite strock recovery ( fastboot was unlocked)
Click to expand...
Click to collapse
What is shown on the cmd window? Is there any error on the phone's screen?
Could you provide a screenshot at least?

TWRP for Intex Aqua 5.5 VR

Note: Unlocking bootloader will completely wipe your device’s data(Everything like music,
photos, videos & apps).So we highly recommend taking backup of your important data. So take
a backup of your apps and data
IMPORTANT & PREREQUIREMENTS
*Make sure there is at least 60% battery left on your smartphone before begin started
this process
• Install USB Drivers on your computer. ( Drivers are Included on The Zip)
• Enable developer option and usb debugging
NEXT STEP
• Connect your android to your PC with USB cable
• Now go to ADB folder and Open the command window there(Right click on the
empty space inside the folder then select “Open command window here” option to
launch a cmd window)
• Now reboot into the bootloader by issuing the following commands. (Make sure
your device is detected by your PC)
adb reboot bootloader
• Now Check fastboot connectivity by giving the command below.If your device is
connect properly then it should return device code.
fastboot devies
• Once in the bootloader, issue the following fastboot command to unlock the
bootloader. (This will unlock your phone and wipe all data of your device)
fastboot oem unlock
There will be a Warning, Press the Volume up Key to Continue.
Then Restart Your Phone, Setup it, then again enable usb debugging .
RECOVERY INSTALL STEP
1. Open the adb folder ( Recovery Image is already Loaded There)
2. Then open a CMD window inside that folder. To do that, Shift + Right click on any empty
white space inside the folder and then select Open command window here.
3. Connect your Android device to the PC. Type the following into the command window to boot
your device into bootloader/fastboot mode:
adb reboot bootloader
4. Once your device boots into bootloader mode, type this into the command line.
fastboot flash recovery recovery.img
5. Once TWRP is successfully flashed on your device, type this final command to reboot your
device.
fastboot reboot
HOW TO ROOT INTEX AQUA 5.5 VR
Download the Super Su .zip From Downloads Tab
Then Go to TWRP Recovery
Touch on Install
Touch on Supersu.zip
It will install & Patch Boot.img on the fly
XDA:DevDB Information
TWRP for Intex Aqua 5.5 VR, Tool/Utility for all devices (see above for details)
Contributors
Rajarshi2
Version Information
Status: Stable
Created 2017-09-04
Last Updated 2017-09-04

can any one help me to port or create a twrp recovery for mtk device

vicky karthi said:
can any one help me to port or create a twrp recovery for mtk device
Click to expand...
Click to collapse
yes i can , tell me your device name

Lava iris 402 and i need to install twrp recovery in infocus m350 which was in lock bootloader

Ok give me sometime i will help you

Make my phone root adaptable...
Intex aqua s3 . android 7.0... Plz

Rajarshi2 said:
yes i can , tell me your device name
Click to expand...
Click to collapse
Intex aqua 5.5 vr plus

doesn't works!!
In fastboot mode
Press Volume Up key to unlock
Press Volume Down key to abort.
volume down key working perfectly and aborting the mission but VOLUME UP KEY DOESN'T WORKS!
In developer mode OEM UNLOCK is already turned on!
In RECOVERY MODE IT SAYS NO COMMAND.

prit19 said:
In fastboot mode
Press Volume Up key to unlock
Press Volume Down key to abort.
volume down key working perfectly and aborting the mission but VOLUME UP KEY DOESN'T WORKS!
In developer mode OEM UNLOCK is already turned on!
In RECOVERY MODE IT SAYS NO COMMAND.
Click to expand...
Click to collapse
Hey Mate just keep pressing volume up button it will work ..It worked in mine.. BTW it I helped then press the thanks button.

smarty1 said:
Hey Mate just keep pressing volume up button it will work ..It worked in mine.. BTW it I helped then press the thanks button.
Click to expand...
Click to collapse
are you serious? because i tried and nothing happens i pressed VOL UP for 100 times nothing happens pressed VOL DWN 1 time.. it got cancled.

prit19 said:
are you serious? because i tried and nothing happens i pressed VOL UP for 100 times nothing happens pressed VOL DWN 1 time.. it got cancled.
Click to expand...
Click to collapse
While you press volume + hold it ffor some seconds it will work.

Install twrp recovery and Root htc One X10

Downloads-
toolkit With Require Files. https://www.mediafire.com/file/ws1qx6j1nxkvvq1/htc+one+x10+Reference.rar
Extras-
Xposed Framework
Dolby atoms
Xtream Music [ Top in Sound System]
How To Unlock Bootloader On htc One X10-
Step 1: Go to htcdev.com/bootloader, make sure you’re registered with HTC. Once the process of signing up is complete, log into HTC Dev. Also, make sure HTC Sync Manager is installed on your PC.
Step 2: Select your device from the Unlock Bootloader page. Select the “All Other Supported Models” as shown in the screenshot below. Click “Begin Unlock Bootloader” and confirm all dialogue boxes on screen that are presented to you.
Step 3: Now, you’re going to be presented with a series of four steps to put your device in bootloader mode: Disconnect the device from PC, turn it off completely, press and hold Volume Down button and the Power button to start the device in Bootloader mode.
Step 4: Once you’re into the bootloader mode, use the device’s volume keys to select the Fastboot option and press power button to confirm. At this point, you’ll need to connect your HTC One to your computer via USB cable.
Step 5: Now on your PC, go to fastboot folder, hold down your keyboard’s shift key and click on any empty space and then click on “Open command window here.”
Step 6: Type in fastboot devices in the command prompt window and press enter. If your drivers are installed correctly, then your HTC One should show up in the command prompt.
Note: if you don’t see your device, don’t panic, reinstall HTC Sync Manager, restart your computer and try again.
Step 7: On page 3 of HTC Dev’s website, click on “Proceed to Step 8”. Follow the listed steps all the way to Step 10 and click on Submit. HTC will mail you your unlock token for your device. Download the token, it should be named “Unlock_code.bin” and then should be placed in your fastboot folder.
Step 8: Now back to the command prompt window, type the following: fastboot flash unlocktoken Unlock_code.bin
Step 9: On your device you’ll get a message saying if you want to unlock your bootloader. Use the volume keys to select your choice, and hit the power button to confirm. Once you’re done, your device will restart and you’ll have an unlocked bootloader.
How To Install twrp recovery Root htc One X10-
Unlock Bootloader From above
Download toolkit From above, Install adb and Fastboot Driver on PC,
Run S-droid toolkit.exe File from twrp/tool Folder. Connect Phone to PC with usb Debugging Enabled.or according to Screen Instructions.
Follow Screen Instructions, or type 41 and hit Enter to flash twrp
Done,
Note-[ after flashing the twrp you are already in adb so don't bootup the Device[ from recovery to Normal] and directly type
45 and hit enter, it will transfer Require File to your Phone and boot it into twrp,
Click on backup tab and create a nandroid backup
do a factory Reset,
Go to Install and select noverity File from storage confirm install
again Go to Install and select xnmagisk File from Device storage/sdcard Confirm Install
Done,
Reboot system Now,if back to Recovery again Reboot system Now done...
Backup Link for ToolKit....Here
Latest OFFICIAL TWRP Recovery for HTC One X10: https://twrp.me/htc/htconex10.html
So this IS a Complete Guide to Install twrp recovery and Root htc One X10 if you have any question Let us Know Via Comment,

Bonsoir ! pouvez-vous m'envoyer ce firmware d'un Htc one x 10 svp : 2PXHIMG_E66_DUGL_M60_SENSE80GP_HTC_Europe_1.07.401.1_Radio_0.A56DJPV1P42.9300.0801_E66W_release_507789_signed.zip
merci