Database Users

Is there a way to access Apps on a soft-bricked phone?

I'm stuck at the boot-screen of Deck's 1.2 rom, however, I can still access HBOOT and Clockwork Mod Recovery.
I don't see an explicit option, but is there a way I could access Apps or other data to save as a back-up?
I foolishly deleted my rom back-up, and last time I used Titanium Backup was a few weeks ago, so it's not a good option. Thanks!

Android 17 said:
I'm stuck at the boot-screen of Deck's 1.2 rom, however, I can still access HBOOT and Clockwork Mod Recovery.
I don't see an explicit option, but is there a way I could access Apps or other data to save as a back-up?
I foolishly deleted my rom back-up, and last time I used Titanium Backup was a few weeks ago, so it's not a good option. Thanks!
Click to expand...
Click to collapse
As long as the .zip for the ROM doesn't wipe /data, you could reflash "Deck's 1.2 ROM hopefully fixing your issue and not losing your apps.

mattykinsx said:
As long as the .zip for the ROM doesn't wipe /data, you could reflash "Deck's 1.2 ROM hopefully fixing your issue and not losing your apps.
Click to expand...
Click to collapse
I already tried wiping cache and dalvik, reflashing the rom, and I still get stuck in a boot-loop =/
Thanks for the suggestion though.

Android 17 said:
I already tried wiping cache and dalvik, reflashing the rom, and I still get stuck in a boot-loop =/
Thanks for the suggestion though.
Click to expand...
Click to collapse
You could wipe /boot and /system as well and reflash and see if that fixes it.

mattykinsx said:
You could wipe /boot and /system as well and reflash and see if that fixes it.
Click to expand...
Click to collapse
I just tried that and it didn't work either. This is maddening.
The last thing I remember doing was tinkering with the lockscreen settings in the advanced settings. I set up a rotary revamped lockscreen with Dolphin Browser HD as my custom application. I have Dolphin saved to SD too, but I don't see why such a small thing would cause constant bootloops.
It ran fine before 1.2 stable and messing with the lockscreen.

Android 17 said:
I just tried that and it didn't work either. This is maddening.
The last thing I remember doing was tinkering with the lockscreen settings in the advanced settings. I set up a rotary revamped lockscreen with Dolphin Browser HD as my custom application. I have Dolphin saved to SD too, but I don't see why such a small thing would cause constant bootloops.
It ran fine before 1.2 stable and messing with the lockscreen.
Click to expand...
Click to collapse
I have titanium backup run every night along with my call log back up app and go sms to back up texts.
Prevents this kind of thing.
Nothing you've said you have done explains a boot loop.

mattykinsx said:
I have titanium backup run every night along with my call log back up app and go sms to back up texts.
Prevents this kind of thing.
Nothing you've said you have done explains a boot loop.
Click to expand...
Click to collapse
That's a good idea. I usually just use Titanium backup when I'm doing a full wipe or flashing a ROM with significant updates, but since I'd been using Deck's for a while and having no issues whatsoever really and just updating incrementally, I didn't think to backup in a while.
I had actually backed-up the ROM prior to flashing 1.2 stable, but I needed to delete it to make room to back up the newer version, and I didn't think it'd be a big deal since it was stable for a few boots. I guess I got too comfortable.
This is ridiculous, I didn't make any changes to the ROM or flash any new radios or anything of the sort that should cause a bootloop.
I do also use the Theme Manager MattedBlues theme but I've been using that for over a week or so with no issues, so I doubt that's the cause.
Oh well, thanks for the ideas though.

Android 17 said:
That's a good idea. I usually just use Titanium backup when I'm doing a full wipe or flashing a ROM with significant updates, but since I'd been using Deck's for a while and having no issues whatsoever really and just updating incrementally, I didn't think to backup in a while.
I had actually backed-up the ROM prior to flashing 1.2 stable, but I needed to delete it to make room to back up the newer version, and I didn't think it'd be a big deal since it was stable for a few boots. I guess I got too comfortable.
This is ridiculous, I didn't make any changes to the ROM or flash any new radios or anything of the sort that should cause a bootloop.
I do also use the Theme Manager MattedBlues theme but I've been using that for over a week or so with no issues, so I doubt that's the cause.
Oh well, thanks for the ideas though.
Click to expand...
Click to collapse
Sorry I took my Xanax to sleep or else I'd likely be able to think of some kind of solution.
Hopefully someone else can help you out.

I think in CWM if you mount System&Data /apps you could utilize adb pull..... Also did you set up any custom partitions, a2sd, data2ext, ect... ?
Sent from my HERO200 using XDA App

Actually thanks for the suggestions guys, I managed to dig up an older version of the rom saved on my downloads folder and flashed it and booted.
For some odd reason, an older release labeled as experimental works better than the 1.2 stable...
It's strange too because I looked around Deck's thread and no one else reported any problems similar to what I was having at all.
For all intents and purposes it appears to be very stable and functional for everyone BUT me
Thanks for the suggestions though. I guess I'll hold off on flashing any roms for a while or wait for a newer version and try flashing with a full wipe.

Cool glad you got her going.
Kaaameeehameeehaaaaaa!

After Flashing New Rom, Settings are preset and apps already installed??

i started noticing that after i flashed a new rom, alot of my settings are set to the way i had them before. and some apps are already installed that would otherwise need a marketplace install..
keep in mind, i always do a wipe of cache/dalvik/sdcard
i think it started happening after i partitioned the sd card for those old sense roms that needed extra space.. cant remember..
but it seems like theres a portion of rom that isnt being wiped and all my settings are being carried over to the next rom flash..
how can i fully wipe my phone or get it back to normal?
this is weird, and i want it to stop. any ideas?
i just flashed back to amonra

TorxT3D said:
i started noticing that after i flashed a new rom, alot of my settings are set to the way i had them before. and some apps are already installed that would otherwise need a marketplace install..
keep in mind, i always do a wipe of cache/dalvik/sdcard
i think it started happening after i partitioned the sd card for those old sense roms that needed extra space.. cant remember..
but it seems like theres a portion of rom that isnt being wiped and all my settings are being carried over to the next rom flash..
how can i fully wipe my phone or get it back to normal?
this is weird, and i want it to stop. any ideas?
i just flashed back to amonra
Click to expand...
Click to collapse
Are you using ROMs that have Google back up enabled?
Also, if the zip isn't set to wipe /data and you're not wiping it then you'll still have all of your data.

That has happened to me too. Are you wiping sdext and android.secure in recovery. I always wipe those and haven't had that happen since I started doing that.
We're comin from a pure power source.

naw i turn off all that google backup stuff.
thats the thing, when i try to wipe sdext it gives me an error (from the last i remember doing it)

Hmmm. Latest version of amon ra?
We're comin from a pure power source.

keep in mind, i always do a wipe of cache/dalvik/sdcard
Click to expand...
Click to collapse
You should be wiping data as well when flashing new roms.

I flash vrsuperwipe everytime I flash, but I use Google backup, so when I flash a new sense ROM it saves a lot of my settings, and my SD-ext apps automatically appear. Good feature imo.
Sent from my PC36100 using Tapatalk

bump for any other answers or advice
thanks guise.
still wondering about other options before testing some new roms

same thing happened to me so I tried repairing sdext and then re-partitioned my card and left it ext2 instead of ext3,wipe data/cache/dalvik cache/system flash superwipe, then flashed rom. don't know which one worked but it stopped. Also I noticed it mainly happens when I flash 3.0 roms but it has happened on CM7 to

TorxT3D said:
i started noticing that after i flashed a new rom, alot of my settings are set to the way i had them before. and some apps are already installed that would otherwise need a marketplace install..
keep in mind, i always do a wipe of cache/dalvik/sdcard
Click to expand...
Click to collapse
You did not wipe data. If you do this you will preserve all of you apps (if they were not on card), data and system settings. This may work for you if the new ROM that you are moving to is similar enough. It can cause big problems if the structure of the ROMs is too different. You can end up with a phone that lags and has wakelocks (at best) or is not functional at all due force closes all over the place.
You should really wipe data as well before flashing a ROM and then do a selective restore of data on the new ROM.

[ROM] Stock rooted 3.2.1 a501_4.483.01_EMEA_TMPL 20-01-12

A Present from Moscow!
Acer Stock HC 3.2.1 Acer_A501_4.483.01_EMEA_TMPL
Rooted
Busybox
Superuser
Data/app folder added with a couple of apps to check root
All stock ACER apps included
You know the procedure for flashing. If not, here they are again, as it seems some people don't know.
You MUST do the wipes and formats.
Installation:
Due to issues with Version 1.7 of recovery, you may get stuck at the boot animation. Highly advise you to downgrade your recovery back to Version 1.5. It seems that some things do not get wiped and formatted correctly.
1. Wipe User Data
2. Wipe Cache
3. Wipe DalviK
4. Wipe Battery Stats
Note: Optional Formatting.
If you really want to remove EVERYTHING in Internal Memory, at this point, go to Backup and Restore. Select "Toggle backup and restore of internal storage (/data/media). Enable this setting by selecting it. By default, it is disabled. Then proceed to the formatting steps. This will format the Entire Internal Memory when you proceed.
If you want to save all the things like downloaded files, apps, pdf's etc, then DO NOT enable this toggle, and just proceed to the Format steps.
Select Go Back, Goto Mounts and Storage
1. Format System
2. Format Cache
3. Format Dalvik
4. Format Flexrom
Select Go Back and select Install from Zip File (for those of you who refuse to update their recovery, select Install zip from SD)
Link Re-established.
DOWNLOAD
Alternate Server
DOWNLOAD
MD5 df253e3f8825197c08a1f0a0b8c24a81

Doesn't work for my tablet, can't get past boot animation.
Did a full wipe, cache, dalvik and battery stats and flashed it now a second time - all i get is only the boot animation.
Any suggestions?
Sent from my GT-I9100 using XDA App

Thanks! I will give it a try either tonight or this weekend and see how it goes for me.
Mucho appreciated!

DerTeufel said:
Doesn't work for my tablet, can't get past boot animation.
Did a full wipe, cache, dalvik and battery stats and flashed it now a second time - all i get is only the boot animation.
Any suggestions?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Not sure what your definition is of a "full wipe", but instructions can be found here:
http://forum.xda-developers.com/showthread.php?t=1390860
I can guarantee you that if all you can get is to the boot animation that the problem is "pilot error".

DerTeufel said:
Doesn't work for my tablet, can't get past boot animation.
Did a full wipe, cache, dalvik and battery stats and flashed it now a second time - all i get is only the boot animation.
Any suggestions?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Try downloading the ROM again. It might be a bad download.

DerTeufel said:
Doesn't work for my tablet, can't get past boot animation.
Did a full wipe, cache, dalvik and battery stats and flashed it now a second time - all i get is only the boot animation.
Any suggestions?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Well, here's what I suggest. Look in my original post. I added the full instructions from my other rom.
It seems now days, the old 3 wipes just don't do a good enough job, you also have to do the formats as well.
(I thought I would be lazy and do only the 3 wipes last night, guess what? Stuck at boot animation) Did the full wipe and format, and it works as advertised.
EDIT: Guess what? This morning, I cannot flash anything, or I should say "hit and miss". Not even my daily driver. Connected to Recovery I believe.

Link re-established. Nothing wrong with the download.
If you have issues, downgrade your recovery back to version 1.5.
The issue with version 1.7 is "hit and miss". Sometimes it works, sometimes it doesn't.

Acer_A501_4.483.01_EMEA_TMPL Differences from A501_4.031.24_4.066.29_COM_GEN1?

STASMK said:
Acer_A501_4.483.01_EMEA_TMPL Differences from A501_4.031.24_4.066.29_COM_GEN1?
Click to expand...
Click to collapse
Well, I haven't checked the comgen1 yet (had to figure out the recovery problem first). Will root it and check it in a bit.
But, so far, I see 4 or 5 language supports are missing from the TMPL. Arabic and Aisian mostly. Also, on install the default is Polish (not a biggie as you can change it).
Other that that, it has a few extra files when compared to 3.2.
It seems I can get 1 or 2 extra sat's on gps when comparing to HC 3.2. But maybe because it's a clear day here.
Also, Acer included a couple new apps. One of them some 3d photo browser that force closes the first time you use it. Then it works normally, sort of. Seems it loses it's images off and on. Nice job acer. And, it's butt ugly. Wonder who the rocket scientist was that chose that app?
I'm not going to mod this one, but I will with the comgen1. Overall it runs good I think.

STASMK said:
Acer_A501_4.483.01_EMEA_TMPL Differences from A501_4.031.24_4.066.29_COM_GEN1?
Click to expand...
Click to collapse
What is that A501_4.031.24_4.066.29_COM_GEN1 build ?
I am only aware of that Acer_A501_4.066.29_COM_GEN1 posted by Vache, but how did you figure 4.031.24 is upgraded to that one ?

Sorry. My Bad
I was thinking about the a501_4.510.01_Com_Gen1H that was leaked out yesterday.
I already rooted it and such, but it seems to be a "Demo" version from a couple of months ago. Not only does it have a strange installer script, but a strange directory structure also. 3g also is partly working.
So basically it's of little use.

Moscow Desire said:
Sorry. My Bad
I was thinking about the a501_4.510.01_Com_Gen1H that was leaked out yesterday.
I already rooted it and such, but it seems to be a "Demo" version from a couple of months ago. Not only does it have a strange installer script, but a strange directory structure also. 3g also is partly working.
So basically it's of little use.
Click to expand...
Click to collapse
Could You provide the MD5 just to check if the download is correct (it is very slow)?
Thanks

v11lemans said:
Could You provide the MD5 just to check if the download is correct (it is very slow)?
Thanks
Click to expand...
Click to collapse
I get one in a few minutes.
The issue, is the U.S. is shutting down all the file servers due to piracy. MegaUpload, MultiUpload (server end) Now all that's left are the slow ones. Took me 45 minutes to download today.
MD5 df253e3f8825197c08a1f0a0b8c24a81

Yeah, its a pain in the bum alright, some of the slower ones already have "removed or taken down because of copyrighted material" messages coming up (deposit files)... A couple have the servers offline - upload king and upload here.
This is gonna be a major pain in the bum if the close down or lock file sharing sites, and the sites themselves may end up locking things down and removing anything they see as copyrighted material, even if its not....
Took me 10 minutes to download an 8mb kernel... I'm gonna end up a bald man before I get this rom....
And then the download stuffs up and I have start ALL OVER AGAIN.... Then to add insult to injury I have to wait 20 minutes.....

ultramag69 said:
Took me 10 minutes to download an 8mb kernel... I'm gonna end up a bald man before I get this rom....
.
Click to expand...
Click to collapse
I'm not quite that bad off (still have all my hair)!
I'm going to look around for some Russian servers. Or something. I noticed one other place, but I have to find it again. They'll probably shut it down also soon.
Next thing you know, they'll shut down GitHub, and all dev comes to a standstill.
Also, I noticed today, XDA is almost at a complete stop. And I can guess who's responsible for THAT!

It's running now, needed to format it to make it work.
Didn't have to format when i was installing v3.2.
Thanks for the help
Sent from my GT-I9100 using XDA App

I think there's going to be a "knee jerk" re-action to the mega upload affair.... Be a REAL pain if we can't continue doing what we want with our devices...
Shame too, just getting good with the new A501 roms coming out...
Hate I might need to revert to stock to pick up ICS upgrade because the chefs can't share their flavours...
Chefs are great for sharing these awesome roms....

ultramag69 said:
I think there's going to be a "knee jerk" re-action to the mega upload affair.... Be a REAL pain if we can't continue doing what we want with our devices...
Shame too, just getting good with the new A501 roms coming out...
Hate I might need to revert to stock to pick up ICS upgrade because the chefs can't share their flavours...
Chefs are great for sharing these awesome roms....
Click to expand...
Click to collapse
Well, I just know enough to make me screw things up
I found another place. 30 min download, But you have to give your e-mail for the link. Not really an issue. 3 more servers went down today.
Seems all that's left, is the small file hosts, and they're starting to limit file size.
I suspect, some serious **** will hit the fan in the next coming week, The US can't keep going on this crusade forever. Otherwise, there won;t be a site left except "foxnews" and Facebook.

IS there a Kernel i can use for overclocking?
Using CPU Master i can only choose 1000MHz, had it overclocked to 1.4GHz with the previous ROM.
Sent from my A501 using XDA App

DerTeufel said:
It's running now, needed to format it to make it work.
Didn't have to format when i was installing v3.2.
Thanks for the help
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
No problem and glad it's running.
Not sure what is going on, but in past 6 months, it seems like we now have to format things. I didn't in the past, but now I must.
Well, it is 2012, so things change.
If you have issues with the Rom, it is pure stock HC 3.2.1. I changed nothing in it. Only SU and busybox and removal of the bootloader blob and recovery. So if a game doesn't run, there is nothing I can do about it. It's an Acer deal.
However, I do have one on my notebook, that has "0" acer stuff in it.

Introduction and few comments re: ICS / rooting

Firstly, what a great forum. I have dabbled with my phone purely on what I have gleaned from here, so keep up the great work.
I have viewed for quite a time but it is a pleasure to make my first post, so go easy on me.
I am a total newbie when it comes to phones although I have a lot of experience building PCs for many years. I have an unbranded S2 (prev XEU) which I updated with ICS OTA a few days ago. I am now on LPS. I then successfully rooted using Rachmat’s work [GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel), which was a breeze to do (apart from initially putting it in download mode instead of recovery and wondering why I couldn’t get any further!!).
I have since installed Titanium Backup and frozen a number of apps.
I want to share some of the problems which I have experienced after updating to ICS:
- I get the wifi problem where connectivity is suddenly lost and necessitates a reboot. After a reboot the battery level dramatically drops. I checked the router (VM Superhub) and strangely it had defaulted to factory settings. I have a LAN which runs well with 2 wired PCs, 2 laptops on wifi, 2 iPod Touch and a BB Playbook – I had to set them up again after reconfiguring the router. Needless to say, the wifi problem still exists and I have to reboot the phone every now and again.
- A strange problem with my internal SD storage – before updating I had about 9gb full which included a number of videos, etc. Following the update it still showed 9gb but my videos were gone and the USB storage folder showed 0kb. Adding up what I actually had only amounted to about 4gb and I had to erase the internal SD to get my space back.
- Battery consumption is still very poor – I had not noticed any difference using ICS. I still only get about 10 hours from a full charge if I am lucky, with a moderate amount of use. I have stopped auto-sync for everything, dimmed the display as much as possible and various other tips and I hope there will be an improvement. I have started using Juice Defender again although I am not convinced on that one.
Rooting has made no difference to the wifi issue and I will reset the router and start again when I get time tomorrow.
Thanks again
Tim

Timbop37 said:
.
Rooting has made no difference to the wifi issue a
Nope and it never ever will rooting is access to a lower level of the OS no more and no less .
jje
Click to expand...
Click to collapse

I too used Rachmat's quick and easy guide on how to root & unroot ICS firmware and found it so simple and great to use. I have flashed a number of different custom ICS roms since rooting XWLP8 and my counter has not gone up at all and there is no yellow triangle. I recommend this method for anyone using ICS.
http://forum.xda-developers.com/showthread.php?t=1501719

Did you wipe everything after updating to ICS?
About battery dropping after reboot, it's normal (at least I didn't find a fix).. I mean, it's normal that the battery indicator shows a wrong information.. if you just let your phone, you will notice the indicator going up without charge.. after reboot sometimes the battery indicator doesn't show the real battery level.
And about your battery lofe, you should be more specific.. like how many time of screen on, calls, if you are using 2G, 3G or wifi, if you are playing games or videos etc.
Sent from my GT-I9100 using Tapatalk 2

I had WIFI problem with the LPQ and LPS update (last saturday OTA) fixed it.

After updating to ICS I erased my internal USB data which solved the problem where my free space was reported inaccurately.
I didn't do a factory reset.
With regard to phone/battery usage, I tend to use it for browsing, email and occasionally music. Don't play many games on it, especially CPU/graphic intensive games. Very occasionally I will watch a video but not many and I fully expect the battery to discahrge quickly.
To give an example, this morning at 09:00 my battery was at 83%. It is now at 41% some 5.5hrs later. Screen is 0% display and has been during this time, all syncing is off, wifi has been on perhaps 10-15 minutes max, no GPS or bluetooth. I have browsed the web, checked emails, etc - used the phone for approximately 30 minutes in 5.5hrs. by the way, JD is showing x2.17.
Thank you
Tim

Timbop37 said:
After updating to ICS I erased my internal USB data which solved the problem where my free space was reported inaccurately.
I didn't do a factory reset.
With regard to phone/battery usage, I tend to use it for browsing, email and occasionally music. Don't play many games on it, especially CPU/graphic intensive games. Very occasionally I will watch a video but not many and I fully expect the battery to discahrge quickly.
To give an example, this morning at 09:00 my battery was at 83%. It is now at 41% some 5.5hrs later. Screen is 0% display and has been during this time, all syncing is off, wifi has been on perhaps 10-15 minutes max, no GPS or bluetooth. I have browsed the web, checked emails, etc - used the phone for approximately 30 minutes in 5.5hrs. by the way, JD is showing x2.17.
Thank you
Tim
Click to expand...
Click to collapse
Are you with CWM recovery? If so, do a nandroid backup first and then wioe everything. Wipe data, cache and dalvik cache.. this won't affect your sd card (both internal and external), but will set the system as default, with no apps or data (such as google accounts).
When you change your system (specially in your case, when you moved from a GB to iCS rom) you should wipe everything.
Also, about battery life, only after 3/4 full cycles you will be able to see how it really is.
But since I've never used stock kernel, can't say much about it, but Abyss is being a great kernel for me.
Sent from my GT-I9100 using Tapatalk 2

luizlee86 said:
Are you with CWM recovery?
Click to expand...
Click to collapse
Do you refer to the CWM.zip file I put on the external SD card from Rachmat's tutorial?
If so, I still have it there. Do you mean go into recovery, install CWM.zip from external SD, and Nandroid backup will be an option?
thanks
Tim

Timbop37 said:
Do you refer to the CWM.zip file I put on the external SD card from Rachmat's tutorial?
If so, I still have it there. Do you mean go into recovery, install CWM.zip from external SD, and Nandroid backup will be an option?
thanks
Tim
Click to expand...
Click to collapse
Hm.. I think so.. can you give me a link to this tutorial so I can confirm?
Sent from my GT-I9100 using Tapatalk 2

luizlee86 said:
Hm.. I think so.. can you give me a link to this tutorial so I can confirm?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
The link is in the 3rd post of this thread.
Thank you for your help.
Tim

Yes, you can use this CWM.zip, you will find an option for backup (there won't be mention to nandroid, so don't look for it).
Sent from my GT-I9100 using Tapatalk 2

Okay, just so that I get this straight...
I go into recovery
Install CWM.zip from sdcard
backup using backup/restore in recover
Wipe data/factory reset from recovery
Wipe cache partition
Where is dalvik cache? Also, will not the factory reset put me back to GB 2.3.4?
Sorry to appear dumb but I just want to get it clear in my head.
Thanks again
Tim

Dalvik is under advanced in cwm.
You will do everything under cwm, ok? Enter normal recovery, apply cwm.zip and do everything in cwm recovery.
No, it won't take you back to gb.
Sent from my GT-I9100 using Tapatalk 2

luizlee86 said:
Dalvik is under advanced in cwm.
You will do everything under cwm, ok? Enter normal recovery, apply cwm.zip and do everything in cwm recovery.
No, it won't take you back to gb.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Sorry, just one more thing. Once I have reset/wiped using recovery do I just restart my phone and use or do I have to restore the backup?
Tim

Just reboot. The backup is just for the case of something going wrong.. the nandroid backup backs up everything.. I mean EVERYTHING.. so if you wipe everything and restore the backup it will be as if you didn't wipe anything.
Sent from my GT-I9100 using Tapatalk 2

I have completed everything and I am in the process of reorganising my phone, having reimported contacts, etc.
Thank you very much for your help. It is much appreciated.
Tim

daveyannihilation said:
I too used Rachmat's quick and easy guide on how to root & unroot ICS firmware and found it so simple and great to use. I have flashed a number of different custom ICS roms since rooting XWLP8 and my counter has not gone up at all and there is no yellow triangle. I recommend this method for anyone using ICS.
http://forum.xda-developers.com/showthread.php?t=1501719
Click to expand...
Click to collapse
I cant get this method to work despite numerous attempts. Not sure where I am going wrong.
It all appears to work okay (Superuser is in the Apps menu) but when I run Root Checker it says it is not rooted and this does appear to be true because the latest Total Recall will not work either.
Maybe someone else could try Root Checker and confirm that they are actually rooted.

Timbop37 said:
I have completed everything and I am in the process of reorganising my phone, having reimported contacts, etc.
Thank you very much for your help. It is much appreciated.
Tim
Click to expand...
Click to collapse
Glad it worked.
I suggest you to try other kernels... but remember, when you flash other kernel, give it some time untill you make conclusions, since, as I said, 3 or 4 full charges are needed to settle things up.

DescendDescend said:
I cant get this method to work despite numerous attempts. Not sure where I am going wrong.
It all appears to work okay (Superuser is in the Apps menu) but when I run Root Checker it says it is not rooted and this does appear to be true because the latest Total Recall will not work either.
Maybe someone else could try Root Checker and confirm that they are actually rooted.
Click to expand...
Click to collapse
Method of choice to root .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje

DescendDescend said:
I cant get this method to work despite numerous attempts. Not sure where I am going wrong.
It all appears to work okay (Superuser is in the Apps menu) but when I run Root Checker it says it is not rooted and this does appear to be true because the latest Total Recall will not work either.
Maybe someone else could try Root Checker and confirm that they are actually rooted.
Click to expand...
Click to collapse
All you have to do is install cwm.zip onto external SD card and install SU-Installer-Signed.zip onto your internal SD (I tried it on external but CWM didn't recognise the file). Reboot into recovery, then choose install update from SD card and install cwm.zip . Once that's installed click on install zip from SD card and install SU-Installer-Signed.zip and once that's installed just go back and reboot.
If Superuser is in your apps list then I'm fairly certain you're rooted. I did exactly what you did and was able to install custom roms, overclock and every app that needs root (Titanium Backup, Rom Manager CWM) asked for permission and it was granted. Give it another try and see how you go. :thumbup:
Sent from my GT-I9100 using XDA

i9505 XXUAMDM, want to go to 4.3 - can you help?

Hi all,
I'm currently on Android 4.2.2 (rooted, UK version, SIM unlocked) and would like update to 4.3.
My Baseband version is I9505XXUAMDM.
Does anyone know which rom file I should use? I'd like to retain root permissions if possible and to use an original (or close as possible) Samsung rom.
Many thanks

Jez_ said:
Hi all,
I'm currently on Android 4.2.2 (rooted, UK version, SIM unlocked) and would like update to 4.3.
My Baseband version is I9505XXUAMDM.
Does anyone know which rom file I should use? I'd like to retain root permissions if possible and to use an original (or close as possible) Samsung rom.
Many thanks
Click to expand...
Click to collapse
I'm basically in the same boat as you mate!
I have the same setup and need the same as you, only I have philz recovery installed.
If you find out please let me know.
Thanks

philipkroberts said:
I'm basically in the same boat as you mate!
I have the same setup and need the same as you, only I have philz recovery installed.
If you find out please let me know.
Thanks
Click to expand...
Click to collapse
I ended up using this which I'm really liking: http://forum.xda-developers.com/showthread.php?t=2352258
And the 'Battery Percentage 1 & Semi Transparent Status Bar' from here: http://forum.xda-developers.com/showthread.php?t=2408258

Jez_ said:
I ended up using this which I'm really liking: http://forum.xda-developers.com/showthread.php?t=2352258
And the 'Battery Percentage 1 & Semi Transparent Status Bar' from here: http://forum.xda-developers.com/showthread.php?t=2408258
Click to expand...
Click to collapse
So you were stuck on the XXUAMDM build and simply followed the instructions on the link you gave and all is working well?
Also I have philz recovery, is this an issue or can this be used instead of CWM?
Thanks

philipkroberts said:
So you were stuck on the XXUAMDM build and simply followed the instructions on the link you gave and all is working well?
Also I have philz recovery, is this an issue or can this be used instead of CWM?
Thanks
Click to expand...
Click to collapse
Yes I was on the I9505XXUAMDM version (see attached image) and just followed the instructions EXCEPT I didn't use ClockworkMod, I'm using 'TWRP Recovery'. I downloaded the 'GALAXY S4 Google Play Edition 4.3 v1.3 CoOoL_BoY.zip' file, placed it on my memory card, booted in to TWRP, wiped the parts as instructed, then ran the installer. All worked nicely!
I backed it all up first (mostly using titanium backup pro), then restored the programs/program data from it after, so I was up and running pretty quickly after.

Jez_ said:
Yes I was on the I9505XXUAMDM version (see attached image) and just followed the instructions EXCEPT I didn't use ClockworkMod, I'm using 'TWRP Recovery'. I downloaded the 'GALAXY S4 Google Play Edition 4.3 v1.3 CoOoL_BoY.zip' file, placed it on my memory card, booted in to TWRP, wiped the parts as instructed, then ran the installer. All worked nicely!
I backed it all up first (mostly using titanium backup pro), then restored the programs/program data from it after, so I was up and running pretty quickly after.
Click to expand...
Click to collapse
Thanks, I shall give that a go then
Philz recovery is basically CWM, so as far as I'm aware you can also run the zip from within philz, However can anyone confirm this?
Sorry to hijack the thread by the way!
---------- Post added at 08:25 PM ---------- Previous post was at 08:21 PM ----------
Also when you backed up with titanium pro did you choose to do the batch operation and backup system settings and apps or just the apps?
Thanks

philipkroberts said:
Thanks, I shall give that a go then
Philz recovery is basically CWM, so as far as I'm aware you can also run the zip from within philz, However can anyone confirm this?
Sorry to hijack the thread by the way!
---------- Post added at 08:25 PM ---------- Previous post was at 08:21 PM ----------
Also when you backed up with titanium pro did you choose to do the batch operation and backup system settings and apps or just the apps?
Thanks
Click to expand...
Click to collapse
I backed up the apps and their settings (but ignored the system apps). Good luck

So I installed the rom and it is more stable but is still crashing alot!
In Philz recovery when you wipe/factory reset there are two options:
Wipe/factory reset
Clean for a new rom
In guessing I should have chose the clean for a new rom option? I mean the phone still has some of my old data on it so I'm sure something went wrong.
I'm debating just flashing to stock rom and giving up! cab anyone suggest anything?
Cheers
Sent from my GT-I9505G using XDA Premium 4 mobile app

philipkroberts said:
So I installed the rom and it is more stable but is still crashing alot!
In Philz recovery when you wipe/factory reset there are two options:
Wipe/factory reset
Clean for a new rom
In guessing I should have chose the clean for a new rom option? I mean the phone still has some of my old data on it so I'm sure something went wrong.
I'm debating just flashing to stock rom and giving up! cab anyone suggest anything?
Cheers
Sent from my GT-I9505G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah you should have chosen the 'Clean for new rom' option. It's likely crashing as it still has settings/files left behind that aren't compatible with your new rom. Mine has been very stable since the upgrade, so it's worth trying again with a proper wipe

Jez_ said:
Yeah you should have chosen the 'Clean for new rom' option. It's likely crashing as it still has settings/files left behind that aren't compatible with your new rom. Mine has been very stable since the upgrade, so it's worth trying again with a proper wipe
Click to expand...
Click to collapse
So it turns out the battery is ruined on the phone, I thought it was the rom initally and I will give it a fresh install when I can.
In the press samsung have stated that some S4 batteries are faulty, Mine has swollen up and the phone no longer lies flat!
Also it only holds charge for about 20 mins!
Anyhow, I have spoken to the local service centre and I can get a free replacement, good news, however will I have to flash my phone back to stock firmware? Or is my warranty still good?
I can borrow a friends battery and flash back to stock fw but will I need to do this or can I just go ahead and flash back on my rom of choice?
I'v never overclocked the phone or played with any battery voltage settings etc, so I think it must be a genuine faulty batch.
Any suggestions?

philipkroberts said:
So it turns out the battery is ruined on the phone, I thought it was the rom initally and I will give it a fresh install when I can.
In the press samsung have stated that some S4 batteries are faulty, Mine has swollen up and the phone no longer lies flat!
Also it only holds charge for about 20 mins!
Anyhow, I have spoken to the local service centre and I can get a free replacement, good news, however will I have to flash my phone back to stock firmware? Or is my warranty still good?
I can borrow a friends battery and flash back to stock fw but will I need to do this or can I just go ahead and flash back on my rom of choice?
I'v never overclocked the phone or played with any battery voltage settings etc, so I think it must be a genuine faulty batch.
Any suggestions?
Click to expand...
Click to collapse
Nope you can leave the phone software as is, it's only the battery that's at issue. If they want to see the phone just say it's private and you don't want them looking at it. Maybe even take the battery out in front of them as you're talking at the counter so that the phone is turned off, and they have the battery to instantly look at. Should be an obvious / easy swap out for them...

Jez_ said:
Nope you can leave the phone software as is, it's only the battery that's at issue. If they want to see the phone just say it's private and you don't want them looking at it. Maybe even take the battery out in front of them as you're talking at the counter so that the phone is turned off, and they have the battery to instantly look at. Should be an obvious / easy swap out for them...
Click to expand...
Click to collapse
Thanks Jez! You've been very helpful!
Well tomorrow my plan is to get the battery replaced, then flash it with that rom listed earlier, It was nice and smooth looking, a shame it didnt have Contacts & Music apps however no biggie, Very nice rom
Thanks

philipkroberts said:
Thanks Jez! You've been very helpful!
Well tomorrow my plan is to get the battery replaced, then flash it with that rom listed earlier, It was nice and smooth looking, a shame it didnt have Contacts & Music apps however no biggie, Very nice rom
Thanks
Click to expand...
Click to collapse
No worries, good luck! It does have the default Google 'People' app, which is the same as the Contacts one. And for music I installed the Google 'Play Mucic' app which isn't bad. The only thing I miss from the Samsung 'TouchWiz' rom is their camera app.

Jez_ said:
No worries, good luck! It does have the default Google 'People' app, which is the same as the Contacts one. And for music I installed the Google 'Play Mucic' app which isn't bad. The only thing I miss from the Samsung 'TouchWiz' rom is their camera app.
Click to expand...
Click to collapse
I didn't know the People app was the same, cheers for that
I went for winamp but tbh its layout is awful and I found it very buggy that and my phone battery was already swollen up! haha.
Will report back with results!
thanks once again.

Got a new battery and not had any issues with the rom at all, only issues I did find was that having my SIM PIN enabled got the phone stuck when it booted, I had to take my sim out and put it in my girlfriends phone to disable the sim lock, after that no issues.
I'm in two minds of if I should reflash it or not tho as it now has a **** ton of my apps, I have used titatnium backup before but I find it to copy my buggy software and back it up then reloading it on my new rom hahah!
But a fresh flash might set it straight for longer avoiding me any future headaches... hahah
Anyhow thanks for all the advice.
Peace