Hi Folks,
MOD for JB 4.1.1
I made this experiment to have the multiwindow interface from Note10.1 JB leak for my N7000 and by luck and a bit of guts, it worked and it looks awesome on my note1. I was just wondering if it could work on note2 using the same idea that I discuss on my thread. I don't have a note2 so I can not test it but I wanted to share the idea in your forum thinking maybe somebody might have the guts to try and explore. It's a learning process for me. I'm sure there are among you who are on the same learning process.
I think the N7100 already have all the necessary lib files for Note10.1-style multiwindow interface. All you need is to copy the missing permission files from the Note10.1 and find a suitable systemui. With the note1, the missing permission files are com.sec.feature.minimode_tray and com.sec.feature.multiwindow.tablet in the /system/etc/permissions folder. I also enabled the nav bar to access the miniapp drawer by editing build.prop and adding qemu.hw.mainkeys with value 0 and change the ro.sf.lcd_density to 213. With the note1, the suitable dpi was between 200 to 213. Then I copied the systemui,apk and seclauncher2.apk from the Galaxy Tab 2 7" and overwrite the ones on my note1 in /system/app folder. Of course, whenever you copy or change files in the /system folder you need to set the right file permissions, normally -rw-r--r--. With the N7100, you need to find the right dpi, you can try 200, maybe less, maybe more. You need to be on a rooted deodex rom and make a nandroid backup before you do this and install another launcher like apex or nova in case the systemui or tw launcer forecloses so that you can be able to change the dpi to another value until you find the sweet spot. When it finally booted without systemui error, I know it finally worked. After that, all I did was swap the apps from the TAB 2 7" and Note10.1 to my note1 one at a time to see which works on my note1, some works, some don't and found modded apps on this thread most of which works on my note1. That's it fellows. Take a leap.
Attached are the files I have used for my mod on note1 and I believe it would also work on note2 by using a dpi of 192. It is not a CWM flashable file. You will need to extract the file and manually copy to specified directory as described here or according to the folder structure of the extracted zip file.
Procedure:
1. Requirement: N7100 Jelly Bean 4.1.1 rooted and deodexed with unlimited apps multiwindow mod installed. Please make a nandroid backup first so you can return to your previous state in case you need/want to.
2. Install another launcher like Apex or Nova as a failsafe in case TW Launcher forecloses.
3. Install another keyboard and enable it in Settings in case the stock keyboard does not work at 192 dpi.
4. Download SystemUI.apk, SecLauncher2.apk and SecBrowser.apk and copy to /system/app folder overwriting the stock files using Solid Explorer/Root Explorer or any file manager that has root access and set file permission property to -rw-r-r (644).
5. Download permissions.zip below, extract and copy just the contents to /system/etc/permissions folder and set file permission property to -rw-r-r (644).
6. Install build prop editor from the Play Store. Run Build Prop Editor and change ro.sf.lcd.density to 192.
Then add new property: qemu.hw.mainkeys with value 0.
7. Reboot phone and explore. The tray bar at the bottom controls the window layout so if the current layout is not dual-mode then using the flashbar panel to open apps in multiview (that is dual-mode) would not work. It takes a while getting familiar with the interface so take your time.
8. Download modded apps from the Note10.1 forum or maybe mod your own using the guide located in the same thread. You can also use the modded 240 dpi apps as alternatives or import the stock apps from TAB 2 7" and Note10.1 and see which one works.
As always, I am not responsible if you brick your phone. Do it at your own risk.
UPDATE:
So one member - f3w1n - has confirmed he was able to make the mod work on his note2 using 192 dpi and is in the process of exploring the apps that would work from the note10.1 on his note2. See post #10.
MOD for JB 4.1.2
The difference between this mod and the 4.1.1 is that there is no longer a tray/nav bar and that there is only one window layout, that is floating, movable, resizable windows, fullscreen and back and forth, and that there is no need to modify the manifest files of apps just like they do in Note10.1 to work on multiview because almost all apps can be resized but not all apps are supposed to look nice and work on window mode. Some apps are not intended by their developers to work and look good on window mode. The flashbar panel no longer works as I said earlier because there is only one window layout - floating windows. The mod is already working for me in the N7000 on this thread .
1. Requirements: N7100 phone with rooted deodex JB 4.1.2 with unlimited multiwindows mod installed. You can use most custom 4.1.2 roms which already have the unlimited apps multiwindow mod built in. Make a nandroid backup to be safe and backup your apps and data with Titanium Backup/Ultimate Backup,etc.
2. Install an alternative launcher like Apex, Nova, ADW or whatever that supports multidpi just in case stock launcher forecloses. Install another keyboard and enable it in Settings in case the stock keyboard does not work at 192 dpi.
3. Install build prop editor from the play store and edit ro.sf.lcd_density = 192.
4. Download the permission.zip file below and extract it. Copy just one file: com.sec.feature.multiwindow.tablet.xml and place it in /system/etc/permissions folder with -rw-r-r (644) permission using Solid Explorer/Root Explorer/Root Browser Lite/Es Explorer. This is the file that makes it all work. Then delete the file com.sec.feature.multiwindow.phone.xml or just rename it to something else.
5. Download the SecLauncher2.apk below which I took from the TAB 2 7" as the stock launcher is not suited for this mod. Make a backup of the stock launcher. Now copy the SecLauncher2.apk to the /system/app folder with -rw-r-r (644) permission.
6. Download the SecBrowser.apk which I took from the Note10.1 as the stock browser won't run on this mod. Make a backup of the stock browser. Now copy SecBrowser.apk to the /system/app folder with -rw-r-r (644) permission.
7. Reboot your phone and explore - open apps, resize them, move them, open multiple apps, and so forth. Let the rom settle for a while as it builds the cache before it resumes the roms usual speed. As in 4.1.1 mod, you can use apps from TAB2 7" and Note10.1 as well as the modded 240 dpi apps in N7100 forum.
*Read more on my mod thread here.
Disclaimer: I am not responsible if you brick your phone using this mod. Use it at your own risk.
So cool. Pls make one for note 2 stock rom! Thaks!
Sent from my GT-N7100 using xda app-developers app
Oh this is friggin' SWEET!!! Man I hope you can get this working on the Note 2 soon. I think it would be especially useful on a much larger screen, like via HDMI on a docking station or something. Hope you can get this to work in TW as well.
Does it affect battery life?
If it needs root that will be the reason for me to try rooting my Note 2
Sent from my GT-N7105 using xda app-developers app
This is very cool man, nice work, hope we have note 2 version
↖(^▽^)↗ Sent From Rego Galaxy Note!! ↖(^▽^)↗
As of now is only 2 windows avsilable in mutitiview on Note 2?
Awesome
sent from: The New S-Pen
Now, imagine implementing this mod combined with the Desktop Smart Dock as described here!! That would be amazing!!
Looking forward into this, if you want a tester im here
Sent from my GT-N7100 using xda premium
Wow, got it working and looksawesome... Time to download note 10.1 apps!
Sent from my GT-N7100 using xda premium
f3w1n said:
Wow, got it working and looksawesome... Time to download note 10.1 apps!
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Can you share you steps how you did it?? Does you s-note still work??
Sent from my GT-N7100 using XDA Premium HD app
You have to overwrite the apps that you have attached in the OP, change the lcd density in build.prop to a maximun of 192 (a bit small but its ok) and ad this in the build.prop aswell: qemu.hw.mainkeys=0
So far all is working excenp samsung keyboard and some apps look strange (should be fixed using the note 10.1 ones. Also i think that there is a post with resaizable stock note 2 apps)
When i have time im going to download the jb leak of the note 10.1 and try some apps
Sent from my GT-N7100 using xda premium
f3w1n said:
You have to overwrite the apps that you have attached in the OP, change the lcd density in build.prop to a maximun of 192 (a bit small but its ok) and ad this in the build.prop aswell: qemu.hw.mainkeys=0
So far all is working excenp samsung keyboard and some apps look strange (should be fixed using the note 10.1 ones. Also i think that there is a post with resaizable stock note 2 apps)
When i have time im going to download the jb leak of the note 10.1 and try some apps
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Ok will wait for the app tests .... then will try it ...
Sent from my GT-N7100 using XDA Premium HD app
This looks nice. Gonna try it when I go back to stock.
In wich line of build.prop I add the code to enable the virtual buttons? Could somebody upload a screenshot? Thanks.:good:
Hell, this looks just gorgeous! As s.o. has mentioned above, this combined with the smart dock... :highfive:
I see a need for a new ROM on this board!
brooon said:
Hell, this looks just gorgeous! As s.o. has mentioned above, this combined with the smart dock... :highfive:
I see a need for a new ROM on this board!
Click to expand...
Click to collapse
+1
brooon said:
Hell, this looks just gorgeous! As s.o. has mentioned above, this combined with the smart dock... :highfive:
I see a need for a new ROM on this board!
Click to expand...
Click to collapse
+10 been coveting this on my note 2 since i got it, good work all.
---------- Post added at 03:48 PM ---------- Previous post was at 03:48 PM ----------
mlecruz said:
This looks nice. Gonna try it when I go back to stock.
Click to expand...
Click to collapse
haha ye that's my problem, now where did i put that nandroid.
You have to add the last line (qemu.hw.mainkeys=0). Look at this screenie.
Sent from my GT-N7100 using xda premium
Any news guys? Some progress? :fingers-crossed:
Related
I know the technical difference b/w ODex-ed and DeODex-ed
I have an odexed ROM
I simply want some applications (apks) from my Previous ROM, which was deodexed
When I PUT .apk files from My Previous ROMs ZIP to my Device's system/app - I get FC
When I restore apps like Go Launcher Ex, from Titanium Backup, I still get FC for that
Any Info...?
I want to use some apps from my Previous ROM
I want Rotary LockScreen
Also, a Professional Theme, Odexed
As I have seen that odexed ROM are so incredibly smooth in almost every aspect
(Not only 1st boot or initial days)
Help appreciated !!
the anserw is simle if your previous firmware was deodexed:
Youraplicationname.odex is missing
@$omator --
Deleting th old apk & dex file, bfore replacing, should work, then?
Sent from my GT-I9000 using xda premium
you must either have all files in pairs apk + odex (thats odex)
or apk only (thats deodexed)
when looking at /system/framework/
that would be jar + odex (odex) or jar only (deodexed)
@$omator
I am talking bout MyFiles.apk
I want new Samsung's MyFiles.apk
So I will delete old apk & dex files
Then put new apk file
Is tht wht u mean?
Sent from my GT-I9000 using xda premium
if you now have aapk+odex
you have to copy new apk and odex
om.thelostone said:
@$omator
I am talking bout MyFiles.apk
I want new Samsung's MyFiles.apk
So I will delete old apk & dex files
Then put new apk file
Is tht wht u mean?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I'm pretty sure I tried this some time ago and found it will not work. The MyFiles.apk is strictly linked to the ROM you are using, something to do with the framework, so you cannot use one on another ROM version.
As for other apk's, if the file you want to use is deodexed, you simply delete the new apk and odex file and put the old one in its place although be warned, it may cause instability on your ROM if you do this with system apk files
ok whatever if you know better
$omator said:
ok whatever if you know better
Click to expand...
Click to collapse
Woah chill on the attitude, I was only offering some help based on my experience with trying the same thing
bigdyl69 said:
I'm pretty sure I tried this some time ago and found it will not work. The MyFiles.apk is strictly linked to the ROM you are using, something to do with the framework, so you cannot use one on another ROM version.
As for other apk's, if the file you want to use is deodexed, you simply delete the new apk and odex file and put the old one in its place although be warned, it may cause instability on your ROM if you do this with system apk files
Click to expand...
Click to collapse
Yup
Thanks
U got my doubt clear
I was not replacing MyFiles actually
Was just giving an example so that $omator thinks I understood
Also
The irony is most of th times, its th system apks tht have dex files
If its not a system apk, I wud rather download th latest 4m market
Sent from my GT-I9000 using xda premium
Hey everyone.
This is my first post in s3 section. I made a guide on how to setup 240 dpi on note 2 and I thought it would be a great idea since the requisites are available for both the phones.
UtkarshGupta said:
Hey everyone
This is my first guide so please be polite
In this guide I will show you how to setup 240dpi or possibly any dpi on your rom.
Links to all the requisites will be given below.
But what is dpi ?
It is the value that manages most ui of the system. a lower dpi means everything would be smaller hence more things could be fitted in the giant screen we have. a higher means everything would be larger hence less could be fitted into the screen
Before We Begin I Want To Clarify The Following-
1)First and foremost I am not responsible for any damage you cause.
2)I assume you have already rooted your phone and have some experience with rooting.
3)You have made backup to be sure that in case you mess up you you can return to what it was like before.
4)Read the whole post before actually starting.
5)Please Hit Thanks If I Helped You
So let's Begin-
1)Download and setup xposed framework (Very good instructions on how to do it in the thread) (You need to reboot).
2)Download these modules - xposed app settings , gappscrashfix , all apps in play store.
3)Enable all the 3 modules (You need to Reboot).
4)Now open xposed app settings and set open each app listed below and in dpi enter 320 but don't change anything else.
-calculator
-camera
-clock
-contacts
-dialer storage
-fm radio
-messaging
-task manager
-touchwiz home
-weather widget main
Now some of these could be skipped or some could be added(can be tested but imao that will make the ui ugly but still it's completely your choice).
Also modded versions of some of these apps has been provided by bala_gamer.
5)Before we begin copy the modded samsung keyboard from the link given or setup some other keyboard and make it default.
6)Now open /system/build.prop or use a build.prop editor if you are very conscious and change the following line "ro.sf.lcd_density=320" to "ro.sf.lcd_density=240"
7)Now before we reboot we need to include apply one fix , so instead of rebooting , power off your phone
8)Then go into recovery and flash the modded samsung keyboard.
9)Reboot and enjoy 240dpi.
Note -
1)The stock keyboard will constantly force close on 240 dpi (if you use xposed settings to set it to 320dpi, you will be practically unable to use it), so bala_gamer(thank him) has customized it to work properly on 240 dpi.
2)Recovery must be custom (ofcourse ).
3)Be sure to flash the correct version of modded apps (i.e. 4.1.1 if you have it or 4.1.2 if you have that)
4)I don't know if gappscrashfix and allappsinplaystore are actually required but nothing bad in using it.
5)I know the explanation of dpi is incorrect but that's all you need to know.
6)Installing xposed framework doesn't affect simplistic framework at all.
7)The gappscrashfix and allappsinplaystore you download would be in .zip format. Just rename them to .apk and you can install it then.
8)Many apps especially the system ones or samsung ones aren't ment to scale well. They are just meant to look good at 320dpi so they will look way ugly at 240dpi. To fix this xposed settings is used. You need to set it for each app that you think is ugly.
9)Please Hit Thanks If I Helped You
Finally the links-
1)xposed framework - http://forum.xda-developers.com/showthread.php?t=1574401 (Link to modules page in his thread).
2)modded apps - http://forum.xda-developers.com/showthread.php?t=2001577
And not to forget credits
-rovo89 for framework
-bala_gamer for modded apps
-numerous other people who helped me in some way or the other (please pm me if I forgot anyone).
Click to expand...
Click to collapse
The guide is exactly same so I am quoting it.
All that is changed that you have to get modded apps from this thread - http://forum.xda-developers.com/showthread.php?t=1873026
Nice one but I prefer this https://play.google.com/store/apps/details?id=com.texdroider.texdroider_dpi
Easy to use and works perfectly
Sent from my GT-I9305 using xda app-developers app
djembey said:
Nice one but I prefer this https://play.google.com/store/apps/details?id=com.texdroider.texdroider_dpi
Easy to use and works perfectly
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
That just modifies the DPI in build.prop. It does not make apps scale selectively. If I'm not mistaken, the Xposed FW is like what Paranoid Android has with its Hybrid engine, where you can selectively scale apps.
djembey said:
Nice one but I prefer this https://play.google.com/store/apps/details?id=com.texdroider.texdroider_dpi
Easy to use and works perfectly
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Correct but that will only do the step 6 of this guide if I am not wrong and most of the ui would be broken
Sent from my GT-N7100 using xda app-developers app
Hello everyone
wish u having a great day
I am coming from a note device so I am more used to 5*5 in the launcher and I love to stick to touch wiz
can anyone help me?
Thanks
Just install nova prime launcher.best available option for android phones.
Sent from my GT-I9500 using Tapatalk
re: Touchwiz 5x5 launcher
alaa1ali said:
Hello everyone
wish u having a great day
I am coming from a note device so I am more used to 5*5 in the launcher and I love to stick to touch wiz
can anyone help me?
Thanks
Click to expand...
Click to collapse
Here you go.... Touchwiz 5x5 Launcher
Installation:
You will need a root capable file manager like "root explorer" to install this.
Temporarily install another launcher while doing this
Unzip the file and copy it over to the internal sdcard
Rename the stock SecLauncher3.apk to SecLauncher3.ap_ (just as a backup).
Copy the new SecLauncher3.apk to the /system/app directory.
Reboot
Set default back to TouchWiz Launcher
Good luck!
Enjoy!
Here is the download link:
http://www.scottsroms.com/downloads/SGS4/mods/SecLauncher3 - 5x5 Home - 5x6 App.zip
Misterjunky said:
Here you go.... Touchwiz 5x5 Launcher
Installation:
You will need a root capable file manager like "root explorer" to install this.
Temporarily install another launcher while doing this
Unzip the file and copy it over to the internal sdcard
Rename the stock SecLauncher3.apk to SecLauncher3.ap_ (just as a backup).
Copy the new SecLauncher3.apk to the /system/app directory.
Reboot
Set default back to TouchWiz Launcher
Good luck!
Enjoy!
Here is the download link:
http://www.scottsroms.com/downloads/SGS4/mods/SecLauncher3 - 5x5 Home - 5x6 App.zip
Click to expand...
Click to collapse
Indicate which versions you are running/offering the i9500 tw launcher does not launch well on the i9505
alaa1ali said:
Hello everyone
wish u having a great day
I am coming from a note device so I am more used to 5*5 in the launcher and I love to stick to touch wiz
can anyone help me?
Thanks
Click to expand...
Click to collapse
Sent from my GT-I9505 using xda premium
paradise220 said:
Just install nova prime launcher.best available option for android phones.
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
thank you buddy for ur reply but i prefer touch wiz :$
Misterjunky said:
Here you go.... Touchwiz 5x5 Launcher
Installation:
You will need a root capable file manager like "root explorer" to install this.
Temporarily install another launcher while doing this
Unzip the file and copy it over to the internal sdcard
Rename the stock SecLauncher3.apk to SecLauncher3.ap_ (just as a backup).
Copy the new SecLauncher3.apk to the /system/app directory.
Reboot
Set default back to TouchWiz Launcher
Good luck!
Enjoy!
Here is the download link:
http://www.scottsroms.com/downloads/SGS4/mods/SecLauncher3 - 5x5 Home - 5x6 App.zip
Click to expand...
Click to collapse
nice one worked like sharm :highfive:
but....
i noticed an annoying dark bar beside each icon
that kinda made me feel lucky and thankful for you already to do a backup of the original file before replacing
i hope i can find a fix for that
thank you so much
saywhatt said:
Indicate which versions you are running/offering the i9500 tw launcher does not launch well on the i9505
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
yes
thank you for the note
my phone is 9500
thanks for your reply
Now that we have 4.4.2 ROM (test build though) how about focus on getting goodies from Note10.1 (2014 Edition) like air command etc. As we know the features for the Note10.1 (2012 edition) would be limited even in the final build of this ROM it is upon the mighty developers here at XDA to make our very capable device perform its optimal.
The snote mod from 2014 note10.1 developed by eric-mod. This is not my work but I am simply putting all mods for convinience.
http://forum.xda-developers.com/showthread.php?p=52236527
Sent from my GT-N7100 using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=48215319
Another mod to add floating multi windows against just 2 windows. Contributed by 'Xperiacle'
Only for rooted ones running this rom.
Download an build.prop editor from the play store or sth like that and change the following lines to :
"ro.product.name=viennaltexx" and "ro.product.device=viennalte"
"ro.product.model=SM-P905"
This will activate some hidden function. You'll get the Note PRO recent apps and notification toggle icons!
contributed by Eric-mod
+1 to thread idea, thanks guys for the contributions, so quick
community 1 corp 0
Prashant Mishra said:
Only for rooted ones running this rom.
Download an build.prop editor from the play store or sth like that and change the following lines to :
"ro.product.name=viennaltexx" and "ro.product.device=viennalte"
"ro.product.model=SM-P905"
This will activate some hidden function. You'll get the Note PRO recent apps and notification toggle icons!
contributed by Eric-mod
Click to expand...
Click to collapse
didn't work for me after the reboot the changes haven't been made?
Edit in build prop editor
fruity_senpai said:
didn't work for me after the reboot the changes haven't been made?
Click to expand...
Click to collapse
you need to open build.prop editor and go to edit, change values and then save. check with root checker and it will show your device as SM-P905.
Prashant Mishra said:
you need to open build.prop editor and go to edit, change values and then save. check with root checker and it will show your device as SM-P905.
Click to expand...
Click to collapse
Ive got it working with the third editor i tried but the phone app started crashing so i restored the settings.
hoopi18 said:
Ive got it working with the third editor i tried but the phone app started crashing so i restored the settings.
Click to expand...
Click to collapse
which one did you use
EDIT: i did it with root explorer because all build.prop editor i tried didn't save my changes.
I used buildprop editor from play store.
Sent from my GT-N7100 using xda app-developers app
fruity_senpai said:
which one did you use
EDIT: i did it with root explorer because all build.prop editor i tried didn't save my changes.
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=ro.ciubex.propeditor
This was the one that saved my changes
Got a screenshot?
My did not allow me any program to edit those files, reboot and return to the initial configurations, which unlocks new features and new applications have the galaxy note pro?
Prashant Mishra said:
Only for rooted ones running this rom.
Download an build.prop editor from the play store or sth like that and change the following lines to :
"ro.product.name=viennaltexx" and "ro.product.device=viennalte"
"ro.product.model=SM-P905"
This will activate some hidden function. You'll get the Note PRO recent apps and notification toggle icons!
contributed by Eric-mod
Click to expand...
Click to collapse
In the case N-8000 this mod produces totally inestable situation. Phone will not work 100% of the times. If you reset, the pda will not start (infinite loop). Finally I had to wipe and reinstall everything from scratch
Wanam Xposed mod can edit the multi-window entries to allow just about any app to work with it
Sent from my SM-P905 using Tapatalk
Phone, phablet, tablet
Does anyone know of a mod for switching between tablet, phablet and phone modes... personally I'd like to get phone mode myself....
torchwolfery said:
Does anyone know of a mod for switching between tablet, phablet and phone modes... personally I'd like to get phone mode myself....
Click to expand...
Click to collapse
Maybe you could try the exposed modules Phab7 or TabletUI trigger.
jika23 said:
Maybe you could try the exposed modules Phab7 or TabletUI trigger.
Click to expand...
Click to collapse
I tried phab7 but it didn't work and tablet trigger doesn't it just trigger tablet mode?
Check this guide to enable particle effect and note 3 effect, it works! I didn't discovered this, i m only reporting! http://forum.xda-developers.com/showthread.php?t=2702528 follow only the first part, set to 4 to have note 3 effect! Heres the original thread! http://forum.xda-developers.com/showthread.php?p=52306274 (thanks to this guide you can also enable grid settings) I think we need a mod for toggles, there are only 15 toggles
How to install multi-window transparency option?
I saw in an earlier post, but did not understand installing.
Sorry, my english no is very good.
Im from mexico
FGM 11 said:
How to install multi-window transparency option?
I saw in an earlier post, but did not understand installing.
Sorry, my english no is very good.
Im from mexico
Click to expand...
Click to collapse
flash/install it via cwm or twrp recovery
google it if you don't know how to flash file via recovery
Not too pleased with the stock font options.
I've tried a couple APKs, resulting in a load of incompatible fonts, and I'm hesitant to try the 3rd party apps and the flashback zips since we're not using full twrp out can.
Any suggestions? What do you use?
Thanks!
Note III KK-style
Font Installer from Google Play.
https://play.google.com/store/apps/details?id=com.jrummy.font.installer
You can also install fonts from online and install them using this app. Right now I'm using Roboto Light Condensed. This app works great and is safe.
Doesn't require you to flash zips at all. It installs right from within the application.
Sent from my SM-N900V using Tapatalk
Not too shabby, thanks for the share.
Curious why you can't simply add a bunch of fonts that are hot swappable.
Note III KK-style
MeetFace said:
Not too shabby, thanks for the share.
Curious why you can't simply add a bunch of fonts that are hot swappable.
Note III KK-style
Click to expand...
Click to collapse
Not sure where I found this but move to system/app and set permissions
https://www.dropbox.com/s/t9ll49c29hz08ec/SamsungSans.apk?dl=0
neopolotin75 said:
Not sure where I found this but move to system/app and set permissions
https://www.dropbox.com/s/t9ll49c29hz08ec/SamsungSans.apk?dl=0
Click to expand...
Click to collapse
I'm having trouble getting any file browser to push the file there. ES File, Root Browser, and FX. Any ideas?
I was able to get it working by just installing it normal. Thanks!
Note III KK-style
MeetFace said:
I was able to get it working by just installing it normal. Thanks!
Note III KK-style
Click to expand...
Click to collapse
Yea I was gonna say I had to reboot my phone to copy it over...I think it's the whole SD KK thing. Glad it worked. ?
I use iFont from the play store.. Open App.... select font.... Download... Set... Set again
Sent from my SM-N900V using Xparent Cyan Tapatalk 2
If your on a specific rom I can inderstand wanting to do this but alliance has like 500+ font options built in as well
Thread moved to Q&A.