Database Users

[Q] Droid 2 Problem

i recently tried to install matt's epic unleashed 3.0 rom. the install completed and all, but when my phone booted up the touch screen wasnt working. ive booted into the stock recovery and erased everything but it still does the same thing. is there any way for me to sbf my phone?

Don't have too much knowledge of that ROM, but I still want to throw in my two cents... When you turn on the phone hold the "up" arrow key and it should go into the bootloader screen and be ready for an spf.

thanks man thats exactly what i needed
edit- nope, nevermind. it boots to the flash screen but when i connect it to my computer it says the device malfunctioned on my computer screen

yea, this is bad. its not sbfing, rsdlite doesnt complete, any ideas guys?

Ok after it says "failed" or whatever is it going into bootloops? Try powering on and holding the "X" key and then you should get the android with the triangle symbol. Press the "search" key on the keyboard and wipe cache and factory reset. Then reboot and you should be all set.
Sent from my DROID2 using XDA App

same problem
can someone help us with this problem.

HerroMoto said:
Ok after it says "failed" or whatever is it going into bootloops? Try powering on and holding the "X" key and then you should get the android with the triangle symbol. Press the "search" key on the keyboard and wipe cache and factory reset. Then reboot and you should be all set.
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
tried this last night, my phone ran out of battery after about the 20th time :[ i charged it overnight so ill try all you guys' suggestions

after charging it overnight, i successfully connected it to my computer, and i sbf'ed with the new droid 2.3.2 sbf file and it worked like a charm

where did you get the file from

sparkyman216 said:
where did you get the file from
Click to expand...
Click to collapse
Here: http://droid2files.com/tools/VRZ_A955_2.3.20_1FF_01.sbf

[Q] Motorola Logo bootloop issue, another one...

Hi,
Was given a Defy by a mate who thinks he has bricked it and replaced it already. I’m hoping I can get it working again. Hopefully with your help this might be possible. 
These are the facts:
1> Current phone state: Motorola logo on screen and nothing else happens. I’m able to get into the bootloader(Power + Volume Up), but not able to get into recovery(Power + Volume Down)
2> Previous firmware version is unknown. All I know is the phone was bought through T-mobile UK.
3> My mate has tried to install various .sbf files(3.4.2-177 nordic Blurless Thread & 3.4.3-11 UK Tmobile Blur Thread & 3.4.3-3 UK Tmobile Blur Thread & 2.51.1 UK - Blur ROM Thread) onto the phone and still the phone stays in the same state.
So I don’t know where to start or what to try really, as I assumed all I would need to do is install a previous .sbf. I read it could have to do with the battery being empty, but I have a external charger and know the battery is full.
Any advice would be great, please help. I have also read other threads, but they do not have the same issues and are able to get there phones working past the point i'm at.
Thanks

same thing happened to my defy today, when I decided to try out CM7 while on a 3.4.2.117-005 nordic. Basically it's F'd up!
When I tried installing CM7 beta 6 zip from recovery, it got installed, but the phone was too damn slow to be used, So I flashed 177-005's sbf again and after completion it got stuck in boot at the Android Text.
Then i flashed with a 3.4.3.11_BLUR_signed sbf and still it's stuck at the Moto Logo.
please help someone, its my new phone..

bikerabhinav said:
same thing happened to my defy today, when I decided to try out CM7 while on a 3.4.2.117-005 nordic. Basically it's F'd up!
When I tried installing CM7 beta 6 zip from recovery, it got installed, but the phone was too damn slow to be used, So I flashed 177-005's sbf again and after completion it got stuck in boot at the Android Text.
Then i flashed with a 3.4.3.11_BLUR_signed sbf and still it's stuck at the Moto Logo.
please help someone, its my new phone..
Click to expand...
Click to collapse
From Stock Recovery wipe factory reset and than flash the SBF...

ifu said:
From Stock Recovery wipe factory reset and than flash the SBF...
Click to expand...
Click to collapse
Tried to enter stock recovery (Vol Down + Power ). Saw the recovery image as it appears and droid robo(as it appears normally), but the screen stays there forever. can't get ahead of it. No menu, no options.

bikerabhinav said:
Tried to enter stock recovery (Vol Down + Power ). Saw the recovery image as it appears and droid robo(as it appears normally), but the screen stays there forever. can't get ahead of it. No menu, no options.
Click to expand...
Click to collapse
When Android Robot appears press Vol Up + Vol Down at same time(BOTH TOGETHER) than other options will appear.....

ifu said:
From Stock Recovery wipe factory reset and than flash the SBF...
Click to expand...
Click to collapse
What happens if i'm unable to get into stock recovery?? I have pulled the battery out, then held down Power + Vol Down and nothing... Should i hold it for longer Or is something really messed up?

ifu said:
When Android Robot appears press Vol Up + Vol Down at same time(BOTH TOGETHER) than other options will appear.....
Click to expand...
Click to collapse
Thanks ! It worked. My cell is back in biz, and I can't express how happy I was to see that Home screen.
Now I'm flashing 3.4.3.11 after which I'll install CM7, hope it wont make system slow this time.

jdearauj said:
What happens if i'm unable to get into stock recovery?? I have pulled the battery out, then held down Power + Vol Down and nothing... Should i hold it for longer Or is something really messed up?
Click to expand...
Click to collapse
Hold it till the Android Robot appears...

ifu said:
Hold it till the Android Robot appears...
Click to expand...
Click to collapse
Well i held it down for just over 2 minutes and still just the motorola logo is showing. Should i be holding it for longer?

jdearauj said:
Well i held it down for just over 2 minutes and still just the motorola logo is showing. Should i be holding it for longer?
Click to expand...
Click to collapse
Remove battery and than hold Vol down and place battery and power ON while holding Vol Down till Android Robot....Best of Luck

ifu said:
Remove battery and than hold Vol down and place battery and power ON while holding Vol Down till Android Robot....Best of Luck
Click to expand...
Click to collapse
Yea, I have tried it every configuration possible and no Android Robot appears… I have even asked my mate and partner to do it to make sure it is just not me…
Could this be the first official “Bricked” Defy? I hope not, was worth a try and assume this is why my mate wanted to get rid of it….
Thanks again for all the advice.

jdearauj said:
Yea, I have tried it every configuration possible and no Android Robot appears… I have even asked my mate and partner to do it to make sure it is just not me…
Could this be the first official “Bricked” Defy? I hope not, was worth a try and assume this is why my mate wanted to get rid of it….
Thanks again for all the advice.
Click to expand...
Click to collapse
Brother than check the battery, cose this steps works usually..And mostly its not easy to brick the phone cose bootloader is locked...If ur phone LED light blinks there is always chance for phone to work......
Sent from my toilet using my Motorola DEFY

ifu said:
Brother than check the battery, cose this steps works usually..And mostly its not easy to brick the phone cose bootloader is locked...If ur phone LED light blinks there is always chance for phone to work......
Sent from my toilet using my Motorola DEFY
Click to expand...
Click to collapse
Not a battery issue as i have two different batteries and both are charged externally. I did find this thread where this user has the same issue. So it seems not just mean really. http://forum.xda-developers.com/showthread.php?t=1096313
Thanks again for your help/advice.

I will check and try something, but between this if ur phone start working...Plz PM me that how ur phone start working....Cose ur problem is extraordinary...
And Sorry for my English...
Sent from my toilet using my Motorola DEFY

@jdearauj just a curiosity, what operative system you use on your computer?
i asked you, because if you have win vista, rsd-lite not worked always very well with this OS....if you have xp or seven its good!

endless bootloop M logo
ok maybe this will help...
quickly remove battery before it gets drained...
now do this,i call it the "monkey method"
>on my left hand i hold my defy without the battery in,
>press the volume up+power at the same time...
now i quickly slip the battery in w/ my right hand & stay a few seconds..it took me to the stock recovery-factory reset & it took me to stock SBF rom & ready to reflash cm7 again.
follow this,its all in here...
http://forum.xda-developers.com/showthread.php?t=1065798&page=10

iaio72 said:
@jdearauj just a curiosity, what operative system you use on your computer?
i asked you, because if you have win vista, rsd-lite not worked always very well with this OS....if you have xp or seven its good!
Click to expand...
Click to collapse
I'm using Windows 7, but my phone connects to RSD Lite without any issues. So no issue with the PC as far as i understand and can see.

hailmary said:
ok maybe this will help...
quickly remove battery before it gets drained...
now do this,i call it the "monkey method"
>on my left hand i hold my defy without the battery in,
>press the volume up+power at the same time...
now i quickly slip the battery in w/ my right hand & stay a few seconds..it took me to the stock recovery-factory reset & it took me to stock SBF rom & ready to reflash cm7 again.
follow this,its all in here...
http://forum.xda-developers.com/showthread.php?t=1065798&page=10
Click to expand...
Click to collapse
Thanks, i will test this out this evening when i'm home again... Will keep you posted on the forum with the result, holding thumbs it works.

There are lots of people having the same issue. could anybody post a sequence of the problem solving methon? can we fix it or it needs to send to the factory?

monkey method
jdearauj said:
Thanks, i will test this out this evening when i'm home again... Will keep you posted on the forum with the result, holding thumbs it works.
Click to expand...
Click to collapse
its tricking the boot animation to load up...
we have the same problem,but it work for me...
continue reading the argument between me & marhensa on that monkey method link.
u will see what happened to my defy..it was scary.
hope u get a lesson on it.gudluck

No recovery + locked out password

Just bought a droid x off someone. Called verizon and the IMEI/ESN/WHATEVER is clean. So after she finished showing me that everything on the phone works and I bought it. So my wife played with it a bit on the way home and somehow locked it up. Now it wants the original owner to log in with her google account before letting me use the phone. After a week of trying to get ahold of this girl with no response, I have a problem. What can I do to reset the phone? Home + power brings me to the triangle/droid/! screen. I assume that means recovery isn't installed. Can someone explain if I need to use SBF/How to use SBF/What to flash?
Thanks in advance!
EDIT: Is there a DX IRC you guys use?

You do need to SBF. Google for instructions; there's tons of videos and guides to help you.
Sent from my DROIDX using XDA App

Okay, so I have the 30.04 Bootloader. I tried flashing the 2.3.340 FULL SBF, and RSD Lite showed the flash passed. It didn't and nothing has changed. Comments, Spock?

Also tried the 2.3.34 SYSTEM ONLY SBF. Didn't do anything. It shows the flash as completing correctly, but I boot it up and nothing has changed.

theherkman said:
Okay, so I have the 30.04 Bootloader. I tried flashing the 2.3.340 FULL SBF, and RSD Lite showed the flash passed. It didn't and nothing has changed. Comments, Spock?
Click to expand...
Click to collapse
Ehh, try SBFing again, and wipe data from recovery.
To enter recovery press home and power (to get the the screen with the Android and the exclamation mark), then press both volume buttons.
Sent from my DROIDX using XDA App

So Home+Power, release both when I see the Android/Exclamation mark, then hold both volume buttons?
Because for some reason I can't get past the Android/Exclamation mark. I don't think it has recovery installed.
EDIT: The search button did it for me.

theherkman said:
So Home+Power, release both when I see the Android/Exclamation mark, then hold both volume buttons?
Because for some reason I can't get past the Android/Exclamation mark. I don't think it has recovery installed.
EDIT: The search button did it for me.
Click to expand...
Click to collapse
Excellent, did wiping data work for you?
Sent from my DROIDX using XDA App

[Q] Cant Get into AP Fast Boot!

I accidentally,... . unknowingly wiped the RED "system" button in Safestrap 3.12 on my Droid RAZR M today. (I was suppose to be wiping the cash and dalvik, but missed) I'm a retard I know. :crying:
Now I cant get into AP Fastboot to restore the phone from this hard brick!
When I press the power button along with the volume buttons, the only thing that happens is the red Motorola 'M" appears for a few seconds then the safe strap screen appears with the little sad robot, but that's it no AP Fastboot. Pressing the on screen buttons to enter Safestrap Recover do not respond. Oh boy I'm afraid I really did it this time. Its on the charger but i don't know if its even charging with out as OS?
Battery power was at 60% before i bricked it (i think). RSD Lite or my PC for that matter don't even see the phone when its plugged in.
Can this be saved? Or do I need to take a trip down to the Verizon Wireless store?
Droid RAZR M
4.1.2 OTA
Rooted
Locked Bootloader
Safestrap 3.12
Partitioned 64GB SD card utilizing Linked2SD

You need a different key combo to get into fastboot. You're not permabricked tho - that's just a really bad softbrick
Sent from my XT907 using Tapatalk 2

sloosecannon said:
You need a different key combo to get into fastboot. You're not permabricked tho - that's just a really bad softbrick
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Really? Well I hope your right. It gives me some hope. lol So do you have any idea of what alternative key combo i might have to use? Thank you for the reply.

Try holding power & volume down until the screen flickers then hold power and both volume buttons. You gotta be quick
If your boot loader is locked you won't be able to fast boot back until the new fast boot files come out though if your on 4.1.2

http://forum.xda-developers.com/showthread.php?t=2207419&page=2
go to the last page new tools and utilities up from matt and it works just unbricked me be sure to thank him :good:

sloosecannon said:
You need a different key combo to get into fastboot. You're not permabricked tho - that's just a really bad softbrick
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Thank you! You were right! was able to get into AP Fastboot with a different button combo like u said. :victory:

shane1 said:
Try holding power & volume down until the screen flickers then hold power and both volume buttons. You gotta be quick
If your boot loader is locked you won't be able to fast boot back until the new fast boot files come out though if your on 4.1.2
Click to expand...
Click to collapse
Shane you were right on the money brother!!! Thank you so very much. It worked perfectly. I'm up and running again.
much respect

bigrob1015 said:
http://forum.xda-developers.com/showthread.php?t=2207419&page=2
go to the last page new tools and utilities up from matt and it works just unbricked me be sure to thank him :good:
Click to expand...
Click to collapse
It worked! I utilized the NEWER version of Mat's utility and it did it!!! Woo Hoo!! Thank you so very much. Thank you all for all the speedy help.

SARM1084 said:
Shane you were right on the money brother!!! Thank you so very much. It worked perfectly. I'm up and running again.
much respect
Click to expand...
Click to collapse
hey no prob! i try to help as much as i can !

bigrob1015 said:
http://forum.xda-developers.com/showthread.php?t=2207419&page=2
go to the last page new tools and utilities up from matt and it works just unbricked me be sure to thank him :good:
Click to expand...
Click to collapse
New to this, i accidentally the whole phone, same problem im in AP fastboot but registers as Device Locked
run through it on windows OS but says 'Fastboot" is not recognized as an internal or external command" and doesnt reboot as said
this process took 1min

Halp
This thread saved my life, then killed me. The suggestion about the different keys was spot on, i got into fast boot mode, then ran that utility. It totally failed me, I must have killed my phone pretty dead, and now there are no more key combos (the suggested one worked at first but now its just making the screen go blank) to try to get back into fast boot to try again. any more suggestions? on the up side verizon just pushed that update so i figure i can blame that to attempt an exchange

Did you take the update before using that utility? If you did, which version did you use? If you were already updated, then you needed to run 1.20. If you ran the wrong utility, that will cause issues. Now, since you can't boot, it sounds like your battery is dead. When you get to the blank screen, plug it in and leave it to charge for a while.

I'm no expert by any means but I'll try to help as best i can. If not me I'm confident someone else will. Now, I apologize because I didn't understand your original post.
Could you elaborate a little more please?
1. What were you trying to do with your phone prior to things going wrong, if they went wrong at all.
2. you mentioned AP Fastboot. So IM going to assume that at least you can access it. (not the same problem that I was having) that's a good thing! lol
3. Are you utilizing a utility like the one by Matt? Or are you doing something else? Like flashing firmware etc.
4. What were you in Fastboot for? What were your intentions?
I hope this doesn't come over a condescending. Just trying to get a Clearer understand of your issue so we can help.
Sent from my XT907 using xda app-developers app

Sorry double post

PartyOnINSANE said:
New to this, i accidentally the whole phone, same problem im in AP fastboot but registers as Device Locked
run through it on windows OS but says 'Fastboot" is not recognized as an internal or external command" and doesnt reboot as said
this process took 1min
Click to expand...
Click to collapse
Look at my previous post
Sent from my XT907 using xda app-developers app

Sorry, my post musnt have updated. As you can see I managed to fix my problem. If there's any issues in the future for anyone I will be sure to advise as best I can.
Sent from my XT907 using xda app-developers app

PartyOnINSANE said:
Sorry, my post musnt have updated. As you can see I managed to fix my problem. If there's any issues in the future for anyone I will be sure to advise as best I can.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
No problems brother. Glad to see your up and running.
Sent from my XT907 using xda app-developers app

Stuck in a Boot Loop
PartyOnINSANE said:
New to this, i accidentally the whole phone, same problem im in AP fastboot but registers as Device Locked
run through it on windows OS but says 'Fastboot" is not recognized as an internal or external command" and doesnt reboot as said
this process took 1min
Click to expand...
Click to collapse
Could you help me please?
I changed 2 lines in my build.prop file so i could see if I could get touchless control.
After I changed it, I restarted my phone. Now it is stuck in the Red M Boot, and it stays there, dosent black screen, dosent boot. I can get to the boot selection menu, but i cant choose anything, they all end up at the Red M. I Read that I can fix it in AP Fastboot, but I can get there. Also if i force it off (with power button and volume button) It just goes back to the Red M.
Everything I do ends up at the Red M
Help fast please, its my only phone, and I just got rid of my house phone
I have a
Droid Razr M
Rooted, no custom Roms or Recovery.
Changed my build.prop from XT907 to XT1087
Changed My Boot Animation to R2D2
A: 4.1.2
8gb Sd card on it.

gjhkl said:
Could you help me please?
I changed 2 lines in my build.prop file so i could see if I could get touchless control.
After I changed it, I restarted my phone. Now it is stuck in the Red M Boot, and it stays there, dosent black screen, dosent boot. I can get to the boot selection menu, but i cant choose anything, they all end up at the Red M. I Read that I can fix it in AP Fastboot, but I can get there. Also if i force it off (with power button and volume button) It just goes back to the Red M.
Everything I do ends up at the Red M
Help fast please, its my only phone, and I just got rid of my house phone
I have a
Droid Razr M
Rooted, no custom Roms or Recovery.
Changed my build.prop from XT907 to XT1087
Changed My Boot Animation to R2D2
A: 4.1.2
8gb Sd card on it.
Click to expand...
Click to collapse
Holding the combination of buttons will only cause it to reboot, every time. Holding the power button down will make it shutdown. With that being said, what was your battery like before you started all of this? If it's below 50%, you're going to have a hard time. Shut the phone down and charge the battery ovenight, prior to attempting to fastboot.
If your battery is good, then you can fastboot. Hold all three buttons down, until you get the phone to power off. As soon as power goes off, you'll see a quick line flash at the top of the screen. As soon as you see this flash, quickly let go of the power button and then re-press it. If you got it right, you'll go into the fastboot menu. If you got it wrong, it will attempt to reboot. If it reboots, just try the button combo again. Once you get into the fastboot menu, use the vol- key to get to the option you need, and then hit the vol+ to choose that option.

RikRong said:
Holding the combination of buttons will only cause it to reboot, every time. Holding the power button down will make it shutdown. With that being said, what was your battery like before you started all of this? If it's below 50%, you're going to have a hard time. Shut the phone down and charge the battery ovenight, prior to attempting to fastboot.
If your battery is good, then you can fastboot. Hold all three buttons down, until you get the phone to power off. As soon as power goes off, you'll see a quick line flash at the top of the screen. As soon as you see this flash, quickly let go of the power button and then re-press it. If you got it right, you'll go into the fastboot menu. If you got it wrong, it will attempt to reboot. If it reboots, just try the button combo again. Once you get into the fastboot menu, use the vol- key to get to the option you need, and then hit the vol+ to choose that option.
Click to expand...
Click to collapse
I have done your steps and I get the menu up, but when I try to scroll down with the volume down button, it doesn't move. It just stays on "normal powerup". How can I fix this?

HTC Glacier black screen vibrating

Hello i have a rooted HTC Glacier with CWM 5.8.1.0 touch with the engineering bootloader my phone started acting up i was running awesome ics rom then it rebooted by itself and now when i reboot it it goes to a black screen and the orange led lights up and vibrates 3 times. I can still enter cwm and flash roms but the phone doesn't go past the black screen. I cant go into the bootloader it stays black and vibrates with a green led light.

Heights713 said:
Hello i have a rooted HTC Glacier with CWM 5.8.1.0 touch with the engineering bootloader my phone started acting up i was running awesome ics rom then it rebooted by itself and now when i reboot it it goes to a black screen and the orange led lights up and vibrates 3 times. I can still enter cwm and flash roms but the phone doesn't go past the black screen. I cant go into the bootloader it stays black and vibrates with a green led light.
Click to expand...
Click to collapse
When u enter recovery, does it give any errors??
Like "unable to mount :e"
"Unable to mount :e/recovery"
Sent Via My Droid RAZR (Spyder)

mickeyasamoah said:
When u enter recovery, does it give any errors??
Like "unable to mount :e"
"Unable to mount :e/recovery"
Sent Via My Droid RAZR (Spyder)
Click to expand...
Click to collapse
No it doesn't cwm works perfectly fine. Aroma installer even works.

Heights713 said:
No it doesn't cwm works perfectly fine. Aroma installer even works.
Click to expand...
Click to collapse
Okay, Remove your battery and reinsert it.
Dont press the power button yet.
Now connect your device to a PC with HTC USB drivers installed and enter the following commands.
adb devices
adb reboot bootloader
If you are able to get into bootloader, let me know.
Sent Via My Droid RAZR (Spyder)

mickeyasamoah said:
Okay, Remove your battery and reinsert it.
Dont press the power button yet.
Now connect your device to a PC with HTC USB drivers installed and enter the following commands.
adb devices
adb reboot bootloader
If you are able to get into bootloader, let me know.
Sent Via My Droid RAZR (Spyder)
Click to expand...
Click to collapse
I tried it leaves me with a black screen adb only responds when im in recovery mode and i tried adb reboot bootloader and it didnt work.

Heights713 said:
I tried it leaves me with a black screen adb only responds when im in recovery mode and i tried adb reboot bootloader and it didnt work.
Click to expand...
Click to collapse
Wow...that's weird.
Have you checked to see weather your volume up key is stuck??
Sent Via My Droid RAZR (Spyder)

mickeyasamoah said:
Wow...that's weird.
Have you checked to see weather your volume up key is stuck??
Sent Via My Droid RAZR (Spyder)
Click to expand...
Click to collapse
I dont think my volume up key works anymore it acted out a while ago.

Heights713 said:
I dont think my volume up key works anymore it acted out a while ago.
Click to expand...
Click to collapse
There!!!!
That's your problem.
When the phone is off and and u press volume up and power, it boots the device in safe mode.
Safe mode disables 3rd party apps at boot up.
Now this only works with stock ROMs and some custom sense ROMs.
If your ROM doesn't support this feature, it would boot into this black screen and begin to flash the red led.
So when the up key gets stuck or malfunctioned it causes the device to boot into that mode at start up.
But what I can rap my head around is why it won't boot into bootloader when you use adb.
Heights713 said:
I dont think my volume up key works anymore it acted out a while ago.
Click to expand...
Click to collapse
Sent Via My Droid RAZR (Spyder)

mickeyasamoah said:
There!!!!
That's your problem.
When the phone is off and and u press volume up and power, it boots the device in safe mode.
Safe mode disables 3rd party apps at boot up.
Now this only works with stock ROMs and some custom sense ROMs.
If your ROM doesn't support this feature, it would boot into this black screen and begin to flash the red led.
So when the up key gets stuck or malfunctioned it causes the device to boot into that mode at start up.
But what I can rap my head around is why it won't boot into bootloader when you use adb.
Sent Via My Droid RAZR (Spyder)
Click to expand...
Click to collapse
Im going to flash a stock sense based rom right now.

mickeyasamoah said:
There!!!!
That's your problem.
When the phone is off and and u press volume up and power, it boots the device in safe mode.
Safe mode disables 3rd party apps at boot up.
Now this only works with stock ROMs and some custom sense ROMs.
If your ROM doesn't support this feature, it would boot into this black screen and begin to flash the red led.
So when the up key gets stuck or malfunctioned it causes the device to boot into that mode at start up.
But what I can rap my head around is why it won't boot into bootloader when you use adb.
Sent Via My Droid RAZR (Spyder)
Click to expand...
Click to collapse
The power button was stuck i got paper and cleaned it up and boom it worked thank you x10!!!!!

Heights713 said:
The power button was stuck i got paper and cleaned it up and boom it worked thank you x10!!!!!
Click to expand...
Click to collapse
Yes!!!! Cleaning the volume button fixed everything! wooo

Heights713 said:
The power button was stuck i got paper and cleaned it up and boom it worked thank you x10!!!!!
Click to expand...
Click to collapse
You welcome...and next time use the thanks button too.
Sent Via My Droid RAZR (Spyder)

Okay i have not experienced this issue in a while since i used the edge of a piece of paper and slid it into the side of the volume up button and put a case on also a friend gave me another Glacier the second one is black.

Heights713 said:
Okay i have not experienced this issue in a while since i used the edge of a piece of paper and slid it into the side of the volume up button and put a case on also a friend gave me another Glacier the second one is black.
Click to expand...
Click to collapse
Ookay...hope u are enjoying it.
Sent from my XT912 using XDA Free mobile app