If I combined various tweaks from different people, will it be more effective and will it apply? What I did was add the missing scripts from one tweak to another, and copy files from bin folders, xbin, etc. to the corresponding folders. Will this apply?
ajdevera said:
If I combined various tweaks from different people, will it be more effective and will it apply? What I did was add the missing scripts from one tweak to another, and copy files from bin folders, xbin, etc. to the corresponding folders. Will this apply?
Click to expand...
Click to collapse
Depends on what script you are refering to, init.d, build.prop, app tweak, jar, etc.
The term tweak is too broad but yes they can cause instability and conflicts especially if you dont know what they do and how they run
this post is approved by the national potato safety regulation
deathnotice01 said:
Depends on what script you are refering to, init.d, build.prop, app tweak, jar, etc.
The term tweak is too broad but yes they can cause instability and conflicts especially if you dont know what they do and how they run
this post is approved by the national potato safety regulation
Click to expand...
Click to collapse
init.d tweaks. What I did was delete some redundant scripts from various tweaks(kuro's tweaks and adrenaline engine) and add it to hyperion rom. Will it perform better? Or is it just useless?
ajdevera said:
init.d tweaks. What I did was delete some redundant scripts from various tweaks(kuro's tweaks and adrenaline engine) and add it to hyperion rom. Will it perform better? Or is it just useless?
Click to expand...
Click to collapse
well, in build.prop tweaks there is a way to check whether the tweak is active but in init.d it has to have kernel support and other stuff, sadly the only way i know how to determine if an init.d tweak is working is i just test out if it gives performance or not
this post is approved by the national potato safety regulation
Related
USSR v7 vs. CoD Rom Vs.HyperionBUILD-07 RC-03 REV 5.Plz Post each one's Pros and Cons And help me and other people decide which one to choose among these..Sorry for creating a new thread...Among 3 Which one do you chose is best,answer by answering in the poll above.
amanbhalla04 said:
USSR v7 vs. CoD Rom Vs.HyperionBUILD-07 RC-03 REV 5.Plz Post each one's Pros and Cons And help me and other people decide which one to choose among these..Sorry for creating a new thread...Among 3 Which one do you chose is best,answer by answering in the poll above.
Click to expand...
Click to collapse
i havent tried USSR v7....
CoD Rom is not for me.....
SO ITS USSR v7 vs xHyperinx™
OK FIRST THING...ill get some INFOS on there Specific Threads
AND COMPARE THEM 1 BY 1
EDIT:
HYPERION:
BASIC FEATURES
De-Odexed
Zipaligned
Recompressed APKS
Optimized APK Images
Rooted
BusyBox and BusyBox run-parts support
Apps2SD enabled
ADVANCED FEATURES (HE THINKS )
EXT 2, 3 and 4 File System Support
CIFS
Swap Support
BaCeM Tweak
UnderVolt Support
Firewall Support (DroidWall Open-Source Project)
ENHANCEMENTS
Mobile BRAVIA® Engine
xLOUD™ Sound Enhancement Technology
SRS Wow™ HD Sound Enhancement
Beats™ Audio Enhancement
HYPERION CORE TOOLS
Smart Zipalign - Automatically zipaligns system and user apks during boot to optimize memory usage
DB Optimizer - Automatically defrags and optimizes *.db files for faster app launch
Data Cleaner - Automatically cleans junks in /data folder
Turbo SD - Speeds R/W of SD Cards
Turbo Boost - A combination of Chobits Nitro Speed, Kuro tweaks and other tweaks for optimum performance
Lag Nullifier - Loopy Smoothness Tweak by lpy customized for Hyperion ROM
Journalism Disabler - Disables file caching to for faster system wide file access
MISCELLANEOUS
Built-in Ads Blocker host file
RapidBoot Tweak
TouchWhiz Launcher
Supports 5-icon dock
Supports Task bar Transparency
Supports Landscape orientation
Supports up to 9 home screens (actually it's 12, but it looks not -so-nice)
Supports grid and list view in app drawer
Icons are arranged alphabetically
New App Drawer Animation
(ALL INFORMATION ARE IN xHyperinx™ Thread)
UsSr.7.
*LATEST FIRMWARE DXLF1
*deodexed all apk
*Epm
*4wayboot
*20toggle lidroid
compatible with music app
*statusbar mod greper added
*paranoid taste
*adrenaline boost
*edt fully working now u can hide clock
*multylanguage
*fast actually like sonic
*compatible with adrenaline engine/kuro tweak/v6 etc just experiment with it
*bravia hack added pre installed
*transparent backgrounds on apps
*6lockscreen
*etc many more just try to tasted it
(ALL INFORMATION IS FROM USSR V7 THREAD)
NOW AS YOU COMPARE IT.............
ULL SEE THE WINNER...
EDIT AGAIN: ILL ADD COD ROM
1. Fully transparent UI with JellyBean and ICS feel.
2. Modified stock apps no third party apps at all ( just one xperia launcher)
3. Improved swipe to remove notifications
4. 6 lockscreens
5. Stusbar tweaks + 15 toggles (EDT)
6. Features come from the kernel like governers and frequecy init.d.
7. Bravia Engine integrated
8. Fast and stable
Features miscellaneous..
1. Fully Deodexed , Zipaligned.
2. Removed some bloatwares.
3. Extended Settings app
4. ICS like Dialer and Phone app.
5. Statusbar fully jellybean themed.
6. Transparent MMS app with skins , removed auto SMS to MMS conversion and increased recipents limit.
7. Transparent Gtalk, contacts, music app.
8. New market with wish list and no restrictions ( But you only can see the app downloading not compitible app may or may not work) (credits to original poster)
9. All google apps already updated and market update compatible.
10. Smooth scrolling through disabled scrolling cache.
11. Added init.d scripts for batter performance ( Thanks to Kurotsugi again).
12. Xperia launcher with settings and already integrated Meego Icon theme.
13. Extended Power Menu
14. Multiple language support.
(ALL INFORMATION IS FROM THE CoD Rom Thread THREAD)
NOW AS YOU COMPARE IT.............
ULL SEE THE WINNER...
Ok.Thnkx.but more simplified.Can you give your review(short but useful) on 3 above roms??
amanbhalla04 said:
Ok.Thnkx.but more simplified.Can you give your review(short but useful) on 3 above roms??
Click to expand...
Click to collapse
dunno what to say lol....
CAUSE ALL PEOPLE HAS PERSONAL PREFERENCES...
so u might like other roms...
and yeah......find a rom that fits your personality,blah,blah and blah....
Hyperion FITS ME...so ill stick with it...
Ok.So According to you,Sir can you tell me the bugs of Hyperion...
If you pursue for just themeing/I mean not advance tweak user just go with stock rom and using Holo Launcher. If you want something that can mod whole sys. go with USSR
Try ussrv7 rom its very fast soooper smooth.......
Give it a try dude u'll be not dissapointed...!!
Sent from my GT-S5360 using xda premium
The cod rom still rockz for me!
Sent from my GT-S5360 using the cod rom premium!
if your in the performance ussr has a very small edge and actually you can never felt it. I tried it and it has better ram management than hyperon. But for now I am using hyperon for having a lot of features especially when it comes to sound mods because I like listening to music. I actually dont like the launcher and style of ussr, it is quite messy for me unlike hyperon it is very neat and simple.
I downloaded USSRv7 flashed it and it is now stucked at Samsung Logo(Samsung Galaxy young Gts5360..something like this)...Help..
Instructions
amanbhalla04 said:
i downloaded ussrv7 flashed it and it is now stucked at samsung logo(samsung galaxy young gts5360..something like this)...help..
Click to expand...
Click to collapse
what did u really do?
Give me the instructions u used
@aman
Tell me the whole procedure how u install the rom also which baseband version u using.......
Sent from my GT-S5360 using xda premium
why make such thread? like devs said dont compare other devs work.. ill know youll say thats it only for survey but for what? you can check the ROM's thread and check the comment of the people not making such thread like this its like you created a war? i guess
Hi ass all you know i decide to leave the dev or roming what you prefer of u+ cause im really bored of this phone and cause i buy nexus 4 to be my new beloved phone...i decide after my topic about tools and tutorials over editing stuff i decide to make another one with the guides and the knowlage i learn this year on android....
The priority isnt on importance is how they show to my on my browser when i open them from my bookmarks...so keep reading!!
1) Bloatware (Applications inside /system/app that we don't need, they steal resources and they make our device heavy and unstable)
https://spreadsheets.google.com/spr...1gdDJRekl4QmkyNmIzUmRvX2h3UDVkQXc&output=html
http://forum.xda-developers.com/showthread.php?t=1382321
2) Smoothscroll & Volume step increase (Smoothscroll makes the rom scrolling more smooth in apps that using smoothscroll like facebook etc..Volume step increases the steps the slider moving from silence to full sound from 5 i think)
http://forum.xda-developers.com/showthread.php?t=1411317
3) Learn to make your own 'eye-candy' mods (Eye candy mods are mods that make your eyes see candys! ^^ aka beautification tweaks
http://forum.xda-developers.com/showthread.php?t=1680328
4) Collection build.prop; init.d; etc. Now with Tewaks-Combo
http://forum.xda-developers.com/showthread.php?t=1709836
5) Aroma installer (Remember the b930 with the aroma installer that you all loved...so this is his thread)
http://forum.xda-developers.com/showthread.php?p=21755929#post21755929
6) Aroma app package creator (The easy GUI that drags and drops apps inside to make your own aroma installer)
http://forum.xda-developers.com/showthread.php?t=1859221
7) Great XDA thread with plenty tweaks mods etc...
http://forum.xda-developers.com/forumdisplay.php?f=613
8) Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs (READ IT)
http://forum.xda-developers.com/showthread.php?t=1369817
9) Transparent background - framework-res.apk Contacts.apk
http://forum.xda-developers.com/showthread.php?t=1765340
10) Change ICS App Switcher to Stock / Chrome browser style (Change the layout of the recent app never be able to do it though )
http://forum.xda-developers.com/showthread.php?p=24012955
11) Transparent-colored statusbar drawer
http://forum.xda-developers.com/showthread.php?t=1835833
12) Disable lockscreen vibration on any ROM
http://forum.xda-developers.com/showthread.php?p=28227782
13) change ICS lockscreen animation to Honeycomb style (ripple)
http://forum.xda-developers.com/showthread.php?t=1539335
14) Create a device tree for MTD devices
http://forum.xda-developers.com/showthread.php?t=2010281
15) Multi DPI Play Store v3.10.14 (If you change lcd denstity you need this)
http://forum.xda-developers.com/showthread.php?t=1839871
16) OVER 150 DESIGNS and SHORTCUTS ft. CID, AOKP, SuperHeroes AND MORE!! (If you wanna change the ring on the lockscreen )
http://forum.xda-developers.com/showthread.php?t=1704727
17) HEX2RGB (Needed when you change color that needed to be in HEX)
http://d21c.com/sookietex/HEX2RGB.html
Thats all folks...remember dont always download and put it in your rom..99% the rom will not boot at all...always search for guides there are many here in xda and there are easy to find!!
Thanks for this guide!! and Pika dont stop making kernels for us atleast till june or stuffs!then ima get my own laptop and linux! And you will have to teach me how to use linaro
-Rik[Rittik]
Rittik said:
Thanks for this guide!! and Pika dont stop making kernels for us atleast till june or stuffs!then ima get my own laptop and linux! And you will have to teach me how to use linaro
-Rik[Rittik]
Click to expand...
Click to collapse
Its a bit difficult without knowlage to provide more...but i give it a try day by day!!if i make something good i will publish it don't worry!!also i will gain more knowlage using nexus so if i can i will provide later too!
pikachukaki said:
Its a bit difficult without knowlage to provide more...but i give it a try day by day!!if i make something good i will publish it don't worry!!also i will gain more knowlage using nexus so if i can i will provide later too!
Click to expand...
Click to collapse
Awesome!! Btw my Friend got 2 nexus(extremely rich guy ) that phone rocks! So awesome
-Rik[Rittik]
◢ Features ◣
- Android performances improved at 360°
- Radically improved management ram on android
(Lags...adios!)
- Script lightweight and revised to be adapted to this
engine
- Improves a lot the graphics: of course Pure
Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60
system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G
modality
- All SQlite database optimized
- Enable hardware features turned off by default for a
better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe
it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze
any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every
week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the
user)
Battery
- Drastically decreased the drainage of battery
- Check the activities that consume too much battery
stop them with PureWakelocks™
- When the phone is charging reduces system services
for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is
nearly exhausted
- Improvements in build.prop as regards the part of
consumption
Graphics, Screen, Images
- Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure
that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- Of course parts of CrossBreeder (credits to dev)
- Of course parts of Adrenaline Engine (credits to dev)
- Of course PureGraphics HD, even though I already
told you
- Of course V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
- Slightly improves the scaling of the frequencies (for
better results you need a good kernel)
- Lightens the load on the CPU switching the workload
to GPU rendering
- Enable the swap partition in Android (experimental)
I've said too much, man. Install this engine and
discover its power!
◢ Compatibility ◣
This engine works on any devices with any rom, but
there is a version for CM's rom and one for stock
based firmwares . So, CMx.x, Lewa Os, MIUI, etc.
Install the stock version only on your stock firmware of
your phone....
if your device don't have gingerbread or ICS officially,
install the CM version (This also applies to the AOSP)
Downloads
Stock Version : http://www.mediafire.com/download/q0a4crr8aq4gm24/PurePerformances™X_Stock.1.4.zip
CM Version : http://www.mediafire.com/download/62ms8ok7afi8230/PurePerformances™X_CM.1.4.zip
Just Flash the .zip
Dear dude, if you like/download my work, leave a
thanks, is a small reward for my efforts
Do I have init.d support?
Well, here is a way to test:
1. Download the file from here: http://forum.xda-developers.com/attachment.php?attachmentid=1612958
2. Extract the file, you will get a file named 00test. DO
NOT flash!
3. Paste it into /etc/init.d. If there is no init.d folder,
most probably you DO NOT have init.d support.
However, if you still wanna try, just create the folder
named "init.d"
4. Change the permissions of the init.d folder and
00test into rwxrwxrwx.
5. Reboot.
6. If you see a file named Test.log in /data, you have
init.d support. If not, you will have to run Uni-init,
Term-init or Zip-init.
or refer to this thread
http://forum.xda-developers.com/showthread.php?t=1933849
Credits
zeppelinrox for his V6
ImbaWind for his parts of Adrenaline Engine
Exit_Only for his Turbo concepts, there aren't any parts
of his work in mine
idcrisis for his CrossBreeder
nicolassp for his S1_Optimize
All credits goes to these people
L.E.D 26 for his support
Me, @Jeeko for the rest
And you for having received the power of the
PurePerformances X
Please always provide link to original thread in op ...
And have you tested it as it's was posted for galaxy s2 ..
Would it work on moto e
luvk1412 said:
Please always provide link to original thread in op ...
And have you tested it as it's was posted for galaxy s2 ..
Would it work on moto e
Click to expand...
Click to collapse
first of all I have permission to post this.
also its for any Android mobile.
I am not saying u don't have permission I am just saying just provide a link to original thread so that people can see the the real source
luvk1412 said:
I am not saying u don't have permission I am just saying just provide a link to original thread so that people can see the the real source
Click to expand...
Click to collapse
source is not required. if anyone needs it I will provide.
luvk1412 said:
Please always provide link to original thread in op ...
And have you tested it as it's was posted for galaxy s2 ..
Would it work on moto e
Click to expand...
Click to collapse
Yup, it works, but you must have init.d enabled to make tweaks work!
@@SidDev
And yes even if you have asked dev for permission, he will be always wanting that his mod to be shared.
So if you share other's work, you must always give link to their op and credits
I am not being rude, but still imagine as you have developed the mod and somebody else posts the mod without giving you proper credits.
Link to original thread
TheStrix said:
Yup, it works, but you must have init.d enabled to make tweaks work!
@@SidDev
And yes even if you have asked dev for permission, he will be always wanting that his mod to be shared.
So if you share other's work, you must always give link to their op and credits
I am not being rude, but still imagine as you have developed the mod and somebody else posts the mod without giving you proper credits.
Link to original thread
Click to expand...
Click to collapse
See op properly
I have given full credits @TheStrix
thank you,i wanted something like this :good:
super awesome
thanks for sharing its awesome.
comezon said:
thank you,i wanted something like this :good:
Click to expand...
Click to collapse
Your are welcome buddy.
How to get int.d support.
We required int.d support to work this mod
Sent from my XT1022 using xda premium
nisu4717 said:
How to get int.d support.
We required int.d support to work this mod
Sent from my XT1022 using xda premium
Click to expand...
Click to collapse
You csn use this or you can also have init.d support by Pimp my ROM app too!:good:
Nice Post !
IvsomEmidio said:
Nice Post !
Click to expand...
Click to collapse
thanks @IvsomEmidio
Update - OP has been updated for better working and updated instructions.
music player stopped
I flashed the Pure Performance X zip ,after flashing the music player stopped working.Google play music app shows couldn't play the track, other music players also cannot play the music
Rohit99 said:
I flashed the Pure Performance X zip ,after flashing the music player stopped working.Google play music app shows couldn't play the track, other music players also cannot play the music
Click to expand...
Click to collapse
which one you flashed??
stock or cm version??
and elaborate.
Cm link is not active
Plz update the link
Moto E single
This mods work in ART runtime?
Thank's.
Simple Init.D Enabler flashable zip
Built mainly for locked bootloaders
Well this is just a simple, custom init.d enabler i made for my old Arc S rom (AnZuMi White) and have finally decided to release it. It was inspired by Iridaki's guide, but is not the same.
Instructions
- Just flash via CWM
- And Enjoy init.d support
- if you wish to check if it is working or not, go to /data and open "init.txt", it should say "Init.d Running"
EDIT: BOOTLOOP ON 5.0!
Should work on most devices, busybox may be required.
noob question. what does init.d do? what is its role?
sourabhp said:
noob question. what does init.d do? what is its role?
Click to expand...
Click to collapse
Originally Posted by the_scotsman (Moderator Liaison Admin / Moderator Committee / XDA News Writer)
"
Init.d plays an important role in the world of Android development and customization It allows users to install scripts and mods to be run at boot—everything from battery tweaks to performance tweaks. It essentially opens the door to a world of mods only possible through the Init.d process, which in turn is usually only available on custom kernels. "
Rajeev said:
Originally Posted by the_scotsman (Moderator Liaison Admin / Moderator Committee / XDA News Writer)
"
Init.d plays an important role in the world of Android development and customization It allows users to install scripts and mods to be run at boot—everything from battery tweaks to performance tweaks. It essentially opens the door to a world of mods only possible through the Init.d process, which in turn is usually only available on custom kernels. "
Click to expand...
Click to collapse
thank you teacher
sourabhp said:
thank you teacher
Click to expand...
Click to collapse
Haa haa.. Welcome my dear Student..
[MOD][SCRIPTs][TWEAKs]Fly-On Mod�V5.0 Special Ver/Feel The Smoothness!/Upd:5/08/15
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
YOU CAN NOW USE THE NEW FLY-ON MOD APP : Click here
Index :
-Post 1 : Introduction to the Mod and general FAQ.
-Post 2 :Technical info and explications about Tweaking Android.
-Post 3 : Download links.
-Post 4 : changelog.
Introduction :
Hey guys, many of my friends (xperia users) asked for a special Optimized version of my Fly-On mod for your device, and so today I made an intial build based on the universal V5.0 Alpha4 for testing.
It's a WIP, that means im going to work progressivly on improving and optimizing this version of the mod for xperia devices.
Fly-On Mod is a Mod that combines many script,binary and other tweaks in one package which is aimed to improve Android system's Smoothness,reduce GUI lags and of course some useful battery life improvements and tweaks!
Features and Improvements :
- Full memory management.
-Linux kernel tweaks and improvements for better performance and battery life.
- Entropy generator engine used to reduce lags.
- Zipalign apps in "/system" and apps in "/data" every 48 hours which result in less RAM usage.
- Sqlite optimizations and faster database access.
- CPU governors tweaks and improvements for better performance and battery life.
- Increased SD Card read-ahead cache to 2048 KB .
- Ad blocking.
- Build.prop tweaks and improvements.
- Cleans log files and tombstones at every boot.
- Many other tweaks for better performance and battery life!
Requirements :
- Android 2.3.x (Gingerbread) or higher.
- Kernel with init.d support.
- Root and newest busyBox version.
-Custom recovery(like CWM or TWRP).
- At least 4MB of free space in "/system".
How to install :
Before Flashing please do a nandroid backup to avoid any incompatibility issues.
1. Download the Fly-On Mod main pack and sqlite pack according to your phone's Android version.
2. Rebooting into recovery mod.
3. Install Signed_Fly-On_Mod_V4.0-Alphax.zip and sqlite_xversion.
4. Reboot and feel the smoothness!
In the package :
+/system/etc/init.d/ scripts :
-ram_manager: It's a complete memory manager
-92cleaner: Cleans log files and tombstones at every boot.
-09sdcardspeedfix: Set SDCard readahead speed to 2048 KB.
-darky_zipalign: Zipalign apps in "/system" every 24 hours.
-zipaligndata: Zipalign apps in "/data" every 24 hours.
-98fly_engine: Contains various tweaks and improvements. (3G/VM/sysctl/kernel/battery life tweaks etc.)
-sqlite_optimize: Optimizing database of apps every 24 hours.
-93kill_media_server: Kills media server when unused to save battery .
-94Governor_tweaks: Tweaks for CPU governors,It's aimed on better performance and battery backup.
+/system/xbin/ :
-sqlite3
-zipalign
-Openvpn
+/system/etc/rngd/ :
-entro
-entropy
-rngd
+/system/lib/
-libncurses.so .
Frequently asked questions:
Q: I'm coming from an old version should I uninstall my version before installing new one?
A:No,Just new version over old one, the installation package will do everything.
Q: I feel very comfortable with my current old version,why should I update to never version?
A:Even If you feel very comfortable with your old version you should update to get latest improvements and bugfixes.
Q: What is EXT4 tweak?
A:It's a tweak that disables EXT4 journalism which increases I/O speed.
Q: Can I use EXT4 tweak?
A:In order to use this one you'll need your phone's file system to be on EXT4.
Q: Can I use INT2EXT+ with Fly-On Mod?
A:Yes It's totally compatible.
Q: Can I use Fly-On MOD™ with any other MOD that uses init.d scripts,binaries and Tweaks?
A:No,you can't as they will conflict ,so choose one of the them.
Q: And when I install a newer Fly-On version should I re-install my RAM Configs/EXT4 tweak?
A:No need.
Q: What is the best kernel to use with Fly-On?
A:No one is the best,Use any custom kernel with init.d support.
Q: What is entropy engine?
A:It an engine used to reduce lags by keeping a section of the Android file system (/dev/random) full of random bits so that the system does not have to wait for the file system to generate them.
Q: So for better performance/battery Entropy must be on or off?
A:No,It just off by default to let users have their own choices.
Q: Can I use Supercharger V6 with Fly-On Mod?
A:Yes,but If you are using Fly-On RAM manager delete It first.(Keep Fly-On main package installed).
Q: But If I have an older version what to do to uninstall Fly-On?
A:Update your version to V4.0 A6 first then Flash the uninstaller.
Q: Do I need to mount /system or /data before flashing?
A:No need to do that as the installation package does everything.
Q: There are many sqlite zips,which one should I pick?
A: Depending on your phone's Android version,like if you are running Android 4.0.x Ice Cream Sandwich flash sqlite_ICS.
How to use Fly-On Mod,after full installation :
+To manage entropy engine,type in terminal :
Code:
su
Entropy_engine
To check if the files are correctly installed type in terminal:
Code:
su
Fly-On
+To uninstall the Mod,type in terminal:
Code:
su
uninstaller
Notice also that:
- Don't use any Task Killer with this Mod!
- Don't use Fly-On Mod with any other tweaking script as they will conflict!
- If you want to use Fly-On Mod in your ROM or your Mod ask for permissions first and give me credits!
- If you have any question ask me in the thread instead of PMs or I will not reply!
- Read well the thread before posting any newbie questions and do not ask for an already answered question!
Some users feedback :
bennybaz said:
Using Alpha6 - Best cure for my old SGS1 running 4.2.2. Thank you, works even better than SC V6
Click to expand...
Click to collapse
l0lh4rd said:
The script is great!!!!!!!!!! Really feeling comfortable at 312MHz-156MHz/Smartass V2/noop, which under these settings without the scripts would make me miserable
Click to expand...
Click to collapse
ronnieryan said:
Version 8 has awesome boot time, only 38 seconds for me
Click to expand...
Click to collapse
KnightlyNinja said:
this version is awesome. ram usage is very low 150 mb only.Superb work haha:victory::silly:
Click to expand...
Click to collapse
KnightlyNinja said:
great. this is one of the best tweak available in xda. it improves smoothness , battery and performance. Almost does the work of a good kernel. Hoping to see more improvements in future.
great work sir.
Click to expand...
Click to collapse
sad25kag said:
╔╦╦╦═╦╦╦╗╔╦╦╗
║║║║║║║║║║║║║
║║║║║║║║║╠╬╬╣
╚══╩═╩══╝╚╩╩╝
Working great and faster on MIUI rom.
░░░░░░░░░░░░▄▄
░░░░░░░░░░░█░░█
░░░░░░░░░░░█░░█
░░░░░░░░░░█░░░█
░░░░░░░░░█░░░░█
██████▄▄█░░░░░██████▄
▓▓▓▓▓▓█░░░░░░░░░░░░░░█
▓▓▓▓▓▓█░░░░░░░░░░░░███
▓▓▓▓▓▓█░░░░░░░░░░░░░░█
▓▓▓▓▓▓█░░░░░░░░░░░░███
▓▓▓▓▓▓@░░░░░█
▓▓▓▓▓▓█████░░░░░░░░██
█████▀░░░░▀▀███████
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
Chemical SidePearl said:
@slaid480
Here is a talking sentence between me and my friend that is watching my phone flying with cm10.1....
Friend: Have you ever heard the definition of INSANITY ???
Me:Yup,it's the new Fly-ON mod by @slaid480.
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
pykfree said:
I put this script in PAC 4.2.2 ROM.. working fine.. it give more performance on my phone.. thank's dude
Click to expand...
Click to collapse
tcris45 said:
Ty man for those awesome tweaks
Click to expand...
Click to collapse
golfgtiedition30 said:
Instaled on rom stocklite v8...no problems its working well :thumbup:
Click to expand...
Click to collapse
nizar.nasani said:
well i test it on the last cm10.1 by biel after new flashing today and still for now no problems and works perfect and thnx btw
Click to expand...
Click to collapse
Credits:
-Thanks to Darky for the base zipalign script.
-Special thank to pikachu01, zacharias.maladroit,collin_ph and juwe11!
-Big thank to zeppelinrox,Exit_Only and Ryuinferno !
-Big thanks to BSDgeek_Jake for the great hosts file.
-voku1987 and mcbyte_it.
-My Friend Maroc-OS For the big Help!
-Big thank to nolinuxnoparty for designing Fly-On logo!
-Any XDA Member That helped Me out in This Project!
-Google!
The source:
you can find my source on the Github: https://github.com/Slaid480/Android-Universal-Fly-On-Mod/tree/Beta
If you have any feature's request use pull request.
If you liked this mod,please rate this thread to 5 stars and press the Thanks button and if it's possible buy a coffee for me,it will help me to work, support and keep this project up to date!
Click here to donate!
About Android tweaking
This Post is reserved for sharing various information about Scripts/Tweaks used to Tweak the Android system through the Linux kernel.
The main goal of using scripts and tweaks:
Scripts and tweaks are used :
-Improve Performance and GUI Smoothness.
-Improve Battery Life.
-Tweak and Optimize the Android engine!
Useful Info About Tweaks:
-LMK:
The Low Memory Killer is a constant debate between more free RAM and more multitasking capabilities as free RAM (more than 60MB free) is actually wasted RAM.
The Low Memory Killer is actually a feature in the Android OS used to improve memory management.
This is an important feature due to the perennial problem of having low free memory causing lagginess and slowness in launching apps. When you have free memory lingering around the number of 40MB or less, the Android OS just lags like hell.
What this would mean is, you would want to tweak the LMK to not have the situation of it having less than 40MB (or even close to that).
The modern Linux machine in the Android ecosystem relies on a mechanism called Low Memory Killer (LMK) to consistently free up RAM. This is due to Android's internal mechanism of caching apps (and never fully exiting them) when you press the back button. This is to enable faster app switching and provide a seamless experience for apps usage model. Android also, by itself will also constantly look for often used apps to cache them for faster app opening. This will happen even before your system fully boots.
Now, when you mention LMK, the most obvious thoughts that come up are minfrees and Out Of Memory (OOM) groupings. Yes, those two are integral parts when it comes to LMK. The issue here is that no one actually mentioned that there are two LMK systems in Android, that being:
- Linux LMK
- Android Dalvik VM LMK
-Journaling/Barriers:
-This has been a touchy subject here in XDA for most people who debate about it. Most recently,Some Scripts included a way to disable journalism on these partitions:
/system (System is read only, it's safe to remove journalism. However, you will not see speed increase by removing it as you're not writing onto /system 99.99% of the time unless you're using Titanium backup to remove system apps or copying init.d scripts to it)
/cache (Cache can be rebuilt on the fly. Data corruption on it is not game breaking)
/data (All of your data on your phone is here. Removing journalism can risk data corruption. Read more below)
On whether we need journalism or not, I will pose this situation:
Journalism is required to maintain data consistency in events that could lead to data corruption. Data could get corrupted in a number of situations:
- Misbehaving app that constantly writes without syncing/committing data to the disk
- Power loss due to forced reboots or bootloops when data is partially written/committed into disk
-Memory leaks:
If you found out that your Android is laggy after sometime and a reboot will make it faster, then you're experiencing memory leaks. "free" is a command to show your currently free memory. It will not necessarily be the same value as your phone's free memory.
-Busybox:
Busybox is required to perform all of your superuser activities in your android phone. There are some problems associated with this when ROM developers decide to use a certain version of Busybox that are incompatible with the binaries that we use in our phones.
-MinFree:
Minfree is part of the Kernel used to multitasking and It differs from a Phone to another because of the RAM available in users space.
-Network Tweaks:
There are some Tweaks that are used to increase the speed of your Network browsing,downloading and uploading
-Build.Prop Tweaks:
Those Tweaks can generally be found in Build.prop /system and they are used to optimize overall system speed and battery
-SD Card Speed Fix:
This is a Tweaks that Has the goal of increasing the read-ahead speed of your SD Card,and that by improving your SD R/W speed.
-Smoothness Tweaks:
Well with the Linux Kernel there is a possibility to add some Tweaks to optimize the GUI Smoothness.
-Entropy generator engine:
This engine can reduce lag by keeping a section of the Android file system (/dev/random) full of random bits so that the system does not have to wait for the file system to generate them.
-Zipalign:
Zipalign is a tweak used to optimize Android application (.apk) files. The purpose is to ensure that all uncompressed data starts with a particular alignment relative to the start of the file. Specifically, it causes all uncompressed data within the .apk, such as images or raw files, to be aligned on 4-byte boundaries. This allows all portions to be accessed directly with mmap() even if they contain binary data with alignment restrictions. The benefit is a reduction in the amount of RAM consumed when running the application.
Credits::
Well,what I can say is that I shared those useful Info after some research and my experience with Linux/Unix,and those some of My main Target that I use to find some of the useful info:
-XDA Forums
-Goolge
Download links
Fly-On Mod V5.0:
-Alpha5: click here
-Alpha6: click here
Change Log
Fly-On Mod™ V5.0 Alpha5 Special:(29/07/2015)
-Initial release.
Fly-On Mod™ V5.0 Alpha6 Special:(3/08/2015)
-Added initial AROMA installer support !
-New Killer script, to replace media killer script.
-Ram manager : Added KSM tweak.
-Improved the fstrim script.
-New fstrim binary.
-Updated Entropy binaries for better performance and battery life.
-Updated the zipalign binary.
-Minor fix to Fly_engine .
-Deleted I/O scheduler tweaks for now.
-deleted Touchscreen script as it was causing overheating issues
for some users; thanks to [email protected]
Reserved 4
You planning version on 5.1.1?
Wysłane z mojego D6603 przy użyciu Tapatalka
this may works with rom is already have mod ? like sqlite or EXT4 tweaks ?
thank you for bringing this to Xperia Device I will definitely try this
dawidek1258 said:
You planning version on 5.1.1?
Wysłane z mojego D6603 przy użyciu Tapatalka
Click to expand...
Click to collapse
Yeah this version supports android 5.1.1
rebiiejr said:
this may works with rom is already have mod ? like sqlite or EXT4 tweaks ?
Click to expand...
Click to collapse
Which mod ?
Black Plague said:
thank you for bringing this to Xperia Device I will definitely try this
Click to expand...
Click to collapse
Youre welcome.
Thanks for the Mod, Im going to test it and report.
am having a locked bootloader s0 on stock odex rom
Good work,thanks bro :good:
Would this work on Note 4?
Sent from my SM-N910P using Tapatalk
This look interesting , will try it on nicki with CyanogenMod 12.1 build 20150729.
Thanks sir !!!
PeriaZ said:
Thanks for the Mod, Im going to test it and report.
Click to expand...
Click to collapse
Waiting for your report
whalesplaho said:
am having a locked bootloader s0 on stock odex rom
Click to expand...
Click to collapse
You need an unlocked bootloader.
mshnayde said:
Would this work on Note 4?
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
This version is optimized for Xperia devices, look at my universal Fly-On Android thread.
Nicklas Van Dam said:
This look interesting , will try it on nicki with CyanogenMod 12.1 build 20150729.
Thanks sir !!!
Click to expand...
Click to collapse
Every report is appreciated.
why this mod needs unlocked bootloader?, init.d its supported for stock lb
kris555777 said:
why this mod needs unlocked bootloader?, init.d its supported for stock lb
Click to expand...
Click to collapse
You need init.d support , Custom recovery and root/busybox , after that your bootloader can be locked no prob
slaid480 said:
You need init.d support , Custom recovery and root/busybox , after that your bootloader can be locked no prob
Click to expand...
Click to collapse
yep, i think everyone look into this thread is rooted and working recovery, but not evryone has ub thats why i asked
oooooooopppppssss.... not unlocking yet!!!
kris555777 said:
yep, i think everyone look into this thread is rooted and working recovery, but not evryone has ub thats why i asked
Click to expand...
Click to collapse
They can flash the mod anyway !