Database Users

[help needed] phone keep restarting after factory reset

hi guys,
i really need help...i have rooted my galaxy note month ago(odin)...i have decided to factory reset tonight as i wanted to clean my phone....
the problem i have once i have done the factory reset....the phone will boot all over again and again....
can anyone guide me please?
i have tried to restart it in cw mode but no luck
NB: NOT WORRIED TO REVERT BACK TO ORIGINAL...JUST WANT THE PHONE TO WORK AGAIN

had the same problem as you
used odin and flashed the samsung from pc ...and rooted again..
to get into download mode u press home-power-volumedown at same time.
---------- Post added at 02:05 PM ---------- Previous post was at 01:58 PM ----------
here's a good noob guide
http://www.inspiredgeek.com/2011/11...alaxy-note-using-odin-on-android-2-3-5-guide/

toofank said:
had the same problem as you
used odin and flashed the samsung from pc ...and rooted again..
to get into download mode u press home-power-volumedown at same time.
---------- Post added at 02:05 PM ---------- Previous post was at 01:58 PM ----------
here's a good noob guide
http://www.inspiredgeek.com/2011/11...alaxy-note-using-odin-on-android-2-3-5-guide/
Click to expand...
Click to collapse
I HAVE MANAGED TO DO EVRYTHING ABOVE EXCEPT STEP 7 WHERE IT SAYS:
Step 7) In CWM recovery just flash the zip file “su-2.3.6.1-ef-signed.zip” from the SDCard.
I CANT SEE zip file “su-2.3.6.1-ef-signed.zip IN CWM I HAVE THE OLD ONE SUPERUSER 3.0.6 ONCE CLICKED STARTS TO INSTAL AND THEN IT SAYS ABORTED......CAN YOU PKEASE CLARIFY?

gdayhtc said:
I HAVE MANAGED TO DO EVRYTHING ABOVE EXCEPT STEP 7 WHERE IT SAYS:
Step 7) In CWM recovery just flash the zip file “su-2.3.6.1-ef-signed.zip” from the SDCard.
I CANT SEE zip file “su-2.3.6.1-ef-signed.zip IN CWM I HAVE THE OLD ONE SUPERUSER 3.0.6 ONCE CLICKED STARTS TO INSTAL AND THEN IT SAYS ABORTED......CAN YOU PKEASE CLARIFY?
Click to expand...
Click to collapse
Su file is located where u put it yourself.
As long as you have flashed it with a stock samsung firmware ur good.
To root just use CF root batch tool from pc. You must find a kernel that is compatible with the rom u just flashed ur phone with. And just run the .bat file and it roots.
---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------
rooting explained very easily here:
u can download everything u need tehre too.
http://www.androidnz.net/2011/11/at-your-own-risk-how-to-root-your.html
---------- Post added at 03:22 PM ---------- Previous post was at 03:20 PM ----------

toofank said:
Su file is located where u put it yourself.
As long as you have flashed it with a stock samsung firmware ur good.
You must find a kernel that is compatible with the rom u just flashed ur phone
---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------
the thing is cant get inside the phone to know what kernel i need...therefore installing the su file cant be done...phone is not accessible...computer is not recgognizing the phone ONLY ODIN IS
Click to expand...
Click to collapse

gdayhtc said:
toofank said:
Su file is located where u put it yourself.
As long as you have flashed it with a stock samsung firmware ur good.
You must find a kernel that is compatible with the rom u just flashed ur phone
---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------
the thing is cant get inside the phone to know what kernel i need...therefore installing the su file cant be done...phone is not accessible...computer is not recgognizing the phone ONLY ODIN IS
Click to expand...
Click to collapse
if odin is recognizing the phone just use odin to flash the phone:
use this rom http://hotfile.com/dl/134454026/e65141a/N7000JPKJ4_N7000OJPKJ3_XSG.zip.html
Click to expand...
Click to collapse

toofank said:
gdayhtc said:
if odin is recognizing the phone just use odin to flash the phone:
use this rom http://hotfile.com/dl/134454026/e65141a/N7000JPKJ4_N7000OJPKJ3_XSG.zip.html
Click to expand...
Click to collapse
man you are legend for helping me, one more thing never flashed a rom on odin, same procedure like above? you click on pda in odin...etc?
please send me a link....real biginner here...used all windows phones b4
Click to expand...
Click to collapse

gdayhtc said:
toofank said:
man you are legend for helping me, one more thing never flashed a rom on odin, same procedure like above? you click on pda in odin...etc?
please send me a link....real biginner here...used all windows phones b4
Click to expand...
Click to collapse
U just use that pda button and press start worked for me.
I am an android noob myself
Click to expand...
Click to collapse

toofank said:
gdayhtc said:
U just use that pda button and press start worked for me.
I am an android noob myself
Click to expand...
Click to collapse
downloading it now...hope it is going to fix this problem otherwise i would be stuffed!!!
Click to expand...
Click to collapse

gdayhtc said:
toofank said:
downloading it now...hope it is going to fix this problem otherwise i would be stuffed!!!
Click to expand...
Click to collapse
Dont worry. Itll work fine and u'll be hitting that thanks button like crazy
Click to expand...
Click to collapse

toofank said:
gdayhtc said:
Dont worry. Itll work fine and u'll be hitting that thanks button like crazy
Click to expand...
Click to collapse
it is asking me for password....what is it?
Click to expand...
Click to collapse

toofank said:
gdayhtc said:
Dont worry. Itll work fine and u'll be hitting that thanks button like crazy
Click to expand...
Click to collapse
i have flashed it with the rom you have advised but unfortunatelly it is doing the same...the phone keep restarting and get stuck on the samsung logo
Click to expand...
Click to collapse

gdayhtc said:
toofank said:
i have flashed it with the rom you have advised but unfortunatelly it is doing the same...the phone keep restarting and get stuck on the samsung logo
Click to expand...
Click to collapse
it workeddddddddddddddddddddddddd
wohoooooooo...what rom is that? obviously i m rooted again? i cant see swype why? i can see arabic fonts now cool
Click to expand...
Click to collapse

gdayhtc said:
gdayhtc said:
it workeddddddddddddddddddddddddd
wohoooooooo...what rom is that? obviously i m rooted again? i cant see swype why? i can see arabic fonts now cool
Click to expand...
Click to collapse
dude ..hehe..chill . u must have patience... hehhe
its UAE stock rom ..
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
its not a pre rooted rom but just follow that link i gave u on rooting it. its easy
---------- Post added at 05:56 PM ---------- Previous post was at 05:55 PM ----------
gdayhtc said:
gdayhtc said:
it workeddddddddddddddddddddddddd
wohoooooooo...what rom is that? obviously i m rooted again? i cant see swype why? i can see arabic fonts now cool
Click to expand...
Click to collapse
the only reason i got that rom is cuz it can show arabic/persian/urdu etc.... which is not supported by european roms
Click to expand...
Click to collapse
Click to expand...
Click to collapse

toofank said:
gdayhtc said:
dude ..hehe..chill . u must have patience... hehhe
its UAE stock rom ..
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
its not a pre rooted rom but just follow that link i gave u on rooting it. its easy
---------- Post added at 05:56 PM ---------- Previous post was at 05:55 PM ----------
gdayhtc said:
the only reason i got that rom is cuz it can show arabic/persian/urdu etc.... which is not supported by european roms
Click to expand...
Click to collapse
Cuz you are legend! ! ! But if I root in the future how can I upgrade the firmware without having problems like I did?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Hi ,
Am in the same boat as gdayhtc - Have been using Windows Phones (HTCs) for the past seven years..... got my galaxy note as my first Android Phone.
Yesterday, tried to root the set but in the process got that 'Yellow Triangle' while booting. - was not sure if I did successfully root it or NOT. - as when trying to delete some files under system\ apps using Root Explorer, I got the message that the set was not properly rooted.
But i saw that the kernel version was changed from previous XXKK3 to something else...
Finally, I thought that I will go for a Factory Reset to get everything as it was.
I did not select "Full Wipe" checkbox and proceeded with Factory reset -- The phone rebooted [In fact tried to reboot] and since then is in the BOOT LOOP..... :-(
Now downloading the N7000JPKJ4_N7000OJPKJ3_XSG.zip | 544.7 MB
Let me see how long it takes for me to get my GALAXY NOTE live again..... :-(

toofank said:
had the same problem as you
used odin and flashed the samsung from pc ...and rooted again..
to get into download mode u press home-power-volumedown at same time.
---------- Post added at 02:05 PM ---------- Previous post was at 01:58 PM ----------
here's a good noob guide
http://www.inspiredgeek.com/2011/11...alaxy-note-using-odin-on-android-2-3-5-guide/
Click to expand...
Click to collapse
@ toofank -- One more noob question - Can we successfully "Factory Reset" our phones after we root them??
Once i am able to reflash my Galaxy Note with " N7000JPKJ4_N7000OJPKJ3_XSG.zip | " method, I am planning to Root the set with the above mentioned Inspiredgeek.com method.

gdayhtc said:
toofank said:
i have flashed it with the rom you have advised but unfortunatelly it is doing the same...the phone keep restarting and get stuck on the samsung logo
Click to expand...
Click to collapse
Hi gdayhtc,
I flashed my Note with the 2.3.6 KL3 Rom using ODIN - I followed every step word by word as mentioned in the below link (post) :
http://forum.xda-developers.com/showthread.php?t=1389693
Everything showed success but after the auto reboot - My NOTE is still stuck in the BOOT LOOP.
I flashed it thrice using the same ODIN process and every time it showed "Success" but the result was same every time - stuck in BOOT LOOP.
What did you do after you faced the similar problem........ and after which you posted - It worked....
Please help me in making my Note live again.
Click to expand...
Click to collapse

Dude, I just flashed new ROM, the ROM that I have been advised, basically it is a ROM like any other ROM but you can read Arabic . I flashed it with Odin....and it worked, it eliminated the problem I had
Let me know how you go....
Sent from my GT-N7000 using xda premium

Hello gdayhtc and toofank!
My problem got resolved..... and my Note is back to normal.
I did understand that the UAE Stock Firmware was just like any other Stock Firmware and hence I flashed using the 2.3.6 Kernel XXKL3 Firmware because thats the latest released and also available for India officially..........
What I did was followed dr.ketan's instruction in this post - http://forum.xda-developers.com/showpost.php?p=20776423&postcount=70
I was able to get into recovery mode by pressing the Vol Up + Home + Power button in my Galaxy Note.
I deleted the Cache first... then wiped data/ factory reset.... and then rebooted the phone...........
Bingo...... everything back to normal. - The phone booted normally as it started when i first got it from the store!!!! and the Android version is the latest 2.3.6

Parandroid Rom

Hi all
I need to download Parandroid Rom but I don't know which one should I choose to download .. I mean after click on Rom link I got many links ..
http://forum.xda-developers.com/showthread.php?t=2020336
Help pls
sorry my English not good

3mmar3d said:
Hi all
I need to download Parandroid Rom but I don't know which one should I choose to download .. I mean after click on Rom link I got many links ..
http://forum.xda-developers.com/showthread.php?t=2020336
Help pls
sorry my English not good
Click to expand...
Click to collapse
That depends. Do you want the latest stable version?
Then download this one. It's the link that says "pa_mako-3.15-28MAR2013-161116.zip"
Do you want the latest dev version with Halo))) in it?
Then download this one. It's the link inside the folder called "dev", file called "pa_mako-3.60-24JUN2013-161032.zip"
NOTE: The 3.60 dev version is extremely stable, so don't worry about using it. I haven't had any problems with it.

Johmama said:
.
Click to expand...
Click to collapse
ok thank u so much i will download dev version and I hope its good for battery life :crying:

Dont forget to flash PA GApps too. It's modified for PA.

Th3RiddL3r said:
Dont forget to flash PA GApps too. It's modified for PA.
Click to expand...
Click to collapse
that is a question i had regarding PA. can I flash regular gapps? i really don't need all the apps that come with the PA gapps. TIA.

Th3RiddL3r said:
Dont forget to flash PA GApps too. It's modified for PA.
Click to expand...
Click to collapse
would u be more clear pls cuz am new user and dont have good experience :fingers-crossed:

3mmar3d said:
would u be more clear pls cuz am new user and dont have good experience :fingers-crossed:
Click to expand...
Click to collapse
PA GApps: http://d-h.st/oUZ
After flashing the ROM make sure to flash the GApps package so that you'll have the Google Apps and you can setup your phone.
So:
Flash ROM
Flash GApps
Reboot
Profit
Hope that helps.
---------- Post added at 10:34 PM ---------- Previous post was at 10:32 PM ----------
deepasadish said:
that is a question i had regarding PA. can I flash regular gapps? i really don't need all the apps that come with the PA gapps. TIA.
Click to expand...
Click to collapse
Just flash them so that you wont have problems with halo. If you dont really need the other Apps, you can just remove them using a root explorer. You just need to go to: system/app/ then delete the ones you dont need.

Th3RiddL3r said:
PA GApps:
After flashing the ROM make sure to flash the GApps package so that you'll have the Google Apps and you can setup your phone.
So:
Flash ROM
Flash GApps
Reboot
Profit
Hope that helps.
---------- Post added at 10:34 PM ---------- Previous post was at 10:32 PM ----------
.
Click to expand...
Click to collapse
oooooh thanx understand now
thank u so much bro.

[Mod][Port]Bravia Engine 3 for XoLo!

So guys this My first work....
I have Made Bravia Engine 3 flashable zip for xolo.The File is Attached Below.
WORKING NOW! :victory:​
Installation process :
1. go to recovery
2.go to flash zip from sd card
3.select BE3.zip
4. Enjoy :victory:
if you got any problem feel free to reply
I am not responsible for your bricked devices..
Dont Forget Press Thanks if i help You!
Credits :
{C0deF0x}

Is it for xolo700 & 700i????

wasim7956 said:
Is it for xolo700 & 700i????
Click to expand...
Click to collapse
Yes

nishantschavan said:
yes
Click to expand...
Click to collapse
i tried, but no change.

Hey,
Fix permisson and Install in recovery its works
and paste this build.prop given below:
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1

nishantschavan said:
hey,
fix permisson and install in recovery its works
and paste this build.prop given below:
Ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
Click to expand...
Click to collapse
how & where to paste in build.prop in which line to paste in build.prop & how to fix permission.

AFTER ADDING THIS IN BUILD.PROP. MY PHONE DON'T START . SO I HAD FORMATTED MY PHONE & MY ALL DATA LOST BECAUSE OF UR Bravia Engine 3.
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1

wasim7956 said:
AFTER ADDING THIS IN BUILD.PROP. MY PHONE DON'T START . SO I HAD FORMATTED MY PHONE & MY ALL DATA LOST BECAUSE OF UR Bravia Engine 3.
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
Click to expand...
Click to collapse
see above i have edited the post try this new zip after flashing see build.prop

nishantschavan said:
see above i have edited the post try this new zip after flashing see build.prop
Click to expand...
Click to collapse
AFTER FLASHING THIS NEW BE3 THAN I HAVE TO FLASH bravia_engine_3 OR NOT??????
---------- Post added at 10:33 AM ---------- Previous post was at 10:27 AM ----------
nishantschavan said:
see above i have edited the post try this new zip after flashing see build.prop
Click to expand...
Click to collapse
flashing done. Thanx, but please, if u dnt mind, tell me that wt is change after flashing this. Or tell little description about changes.

wasim7956 said:
AFTER FLASHING THIS NEW BE3 THAN I HAVE TO FLASH bravia_engine_3 OR NOT??????
---------- Post added at 10:33 AM ---------- Previous post was at 10:27 AM ----------
flashing done. Thanx, but please, if u dnt mind, tell me that wt is change after flashing this. Or tell little description about changes.
Click to expand...
Click to collapse
its hard to figure out difference... in quality.. u check build.prop to confirm

nishantschavan said:
its hard to figure out difference... in quality.. u check build.prop to confirm
Click to expand...
Click to collapse
YA, I CHECKED BUILD.PROP. IT CHANGE & 2 LINE ALSO ADDED, BUT TELL ABOUT LITTLE CHANGE BECOZ I CANT FIGURE OUT THE CHANGES. THANX:fingers-crossed:

wasim7956 said:
YA, I CHECKED BUILD.PROP. IT CHANGE & 2 LINE ALSO ADDED, BUT TELL ABOUT LITTLE CHANGE BECOZ I CANT FIGURE OUT THE CHANGES. THANX:fingers-crossed:
Click to expand...
Click to collapse
Picture and Video Quality Improves if Bravia Engine is Working Properly, But it is Hard to Find any differences on Non Xperia Devices.
Sent From My Xperia M C2004 Using Tapatalk

nishantschavan said:
So guys this My first work....
I have Made Bravia Engine 3 flashable zip for xolo.The File is Attached Below.
WORKING NOW! :victory:​
Installation process :
1. go to recovery
2.go to flash zip from sd card
3.select BE3.zip
4. Enjoy :victory:
if you got any problem feel free to reply
I am not responsible for your bricked devices..
Dont Forget Press Thanks if i help You!
Click to expand...
Click to collapse
Great Bro !!!! :good::laugh:

work Thx from Poland

wasim7956 said:
AFTER FLASHING THIS NEW BE3 THAN I HAVE TO FLASH bravia_engine_3 OR NOT??????
---------- Post added at 10:33 AM ---------- Previous post was at 10:27 AM ----------
flashing done. Thanx, but please, if u dnt mind, tell me that wt is change after flashing this. Or tell little description about changes.
Click to expand...
Click to collapse
Bravia engine is graphic tweaks which improves graphics/images quality...there's slight difference in quality...if u want better image quality..u should flash this mod if u want..
and sorry for late reply

I WANT CHANGE ANDROID ON MY S3 19305!!! help

hi guys!!
need help...
im not good in this stuff...
have galaxy s3 i9305 with android verson 4.4.4 and baseband version i9305xxufoa1!
already make some research on web and i saw i can change my android to lollipop android.
already try but nothing is worked!!
download lot of stuff and try in different ways but nothing!!
SOMEBODY PLEASE CAN HELP MEEEEE!!!!!
THANKS TO EVERYONE!!!!!

vladiperth said:
hi guys!!
need help...
im not good in this stuff...
have galaxy s3 i9305 with android verson 4.4.4 and baseband version i9305xxufoa1!
already make some research on web and i saw i can change my android to lollipop android.
already try but nothing is worked!!
download lot of stuff and try in different ways but nothing!!
SOMEBODY PLEASE CAN HELP MEEEEE!!!!!
THANKS TO EVERYONE!!!!!
Click to expand...
Click to collapse
This process will void your warranty. If you don't care about it so go for it.
First step is to flash a custom recovery through odin. If you know how to work with odin do it and then reply my post if not tell me to give you a tutorial.

JohnSmit268 said:
This process will void your warranty. If you don't care about it so go for it.
First step is to flash a custom recovery through odin. If you know how to work with odin do it and then reply my post if not tell me to give you a tutorial.
Click to expand...
Click to collapse
hi thanks for answer..
i already make flash of my root with odin... and have super su on..
to put on lollipop what i have to do??

vladiperth said:
hi thanks for answer..
i already make flash of my root with odin... and have super su on..
to put on lollipop what i have to do??
Click to expand...
Click to collapse
Use flashify app (on Google play) to flash recovery file. Download it here:https://dl.twrp.me/i9305

oki then....
i downloaded app and file...
next step??

vladiperth said:
oki then....
i downloaded app and file...
next step??
Click to expand...
Click to collapse
Open flashify. Grant it root. And go to flash section choose recovery image and select the file you downloaded to get flashed.

JohnSmit268 said:
Open flashify. Grant it root. And go to flash section choose recovery image and select the file you downloaded to get flashed.
Click to expand...
Click to collapse
oki..
then that file i need to copy on sdcard or internal memory of phone??

vladiperth said:
oki then....
i downloaded app and file...
next step??
Click to expand...
Click to collapse
After you flashed the recovery you need to download a lollipop rom if you already have it no need to. But if you don't, download from this link: https://www.androidfilehost.com/?fid=24269982087008992
---------- Post added at 02:36 PM ---------- Previous post was at 02:35 PM ----------
vladiperth said:
oki..
then that file i need to copy on sdcard or internal memory of phone??
Click to expand...
Click to collapse
No difference just choose it in flashify.

oki.. perfect... done...
ask me to reboot phone.. and i did it... and now i have screen with different options..
oki... i have to download that one...
but i have another one this one: cm-12.1-20150928-UNOFFICIAL-temasek-i9300-V17.3
but im downloading other one

oki..
i have a file...
now?

vladiperth said:
oki.. perfect... done...
ask me to reboot phone.. and i did it... and now i have screen with different options..
oki... i have to download that one...
but i have another one this one: cm-12.1-20150928-UNOFFICIAL-temasek-i9300-V17.3
but im downloading other one
Click to expand...
Click to collapse
Now you have to take a nandroid backup of your phone using your recovery. It is only to avoid unexpected problems that comes with rom flashing. Boot into recovery for this work power the phone off and turn it on using power+home+volume up buttons. Keep pressing them while you are on s3 logo( about 4 seconds ) and then wait to enter recovery now go to backup section tick all and backup them.

JohnSmit268 said:
Now you have to take a nandroid backup of your phone using your recovery. It is only to avoid unexpected problems that comes with rom flashing. Boot into recovery for this work power the phone off and turn it on using power+home+volume up buttons. Keep pressing them while you are on s3 logo( about 4 seconds ) and then wait to enter recovery now go to backup section tick all and backup them.
Click to expand...
Click to collapse
oki perfect... now is backing up!!!...
nealry finish...
finish

vladiperth said:
oki perfect... now is backing up!!!...
nealry finish...
finish
Click to expand...
Click to collapse
Sorry I forgot one download. Download gapps form: opengapps.org be sure to download 5.1 arm gapps you can use any of this type's gapps but you'd better use mini or higher. After this download you can fly to lollipop.

hold on ... if you have a i9305 you cannot flash ROMs from i9300
you're in the wrong section

maultasche said:
hold on ... if you have a i9305 you cannot flash ROMs from i9300
you're in the wrong section
Click to expand...
Click to collapse
Yes he is but he is receiving guides for i9305 don't worry mate

he downloaded Temasek's ROM which is for i9300

JohnSmit268 said:
Sorry I forgot one download. Download gapps form: opengapps.org be sure to download 5.1 arm gapps you can use any of this type's gapps but you'd better use mini or higher. After this download you can fly to lollipop.
Click to expand...
Click to collapse
oki... i start to download gapps 5.1 arm stock and mini..

maultasche said:
he downloaded Temasek's ROM which is for i9300
Click to expand...
Click to collapse
No I gave him the link for i9305 cm 12.1 don't worry.
---------- Post added at 04:12 PM ---------- Previous post was at 04:11 PM ----------
vladiperth said:
oki... i start to download gapps 5.1 arm stock and mini..
Click to expand...
Click to collapse
Download only one of em no need for both.

JohnSmit268 said:
No I gave him the link for i9305 cm 12.1 don't worry.
---------- Post added at 04:12 PM ---------- Previous post was at 04:11 PM ----------
Download only one of em no need for both.
Click to expand...
Click to collapse
ah oki perfect!!
i have to wait now, its downloading..
and what u think about 5.1 arm super?

vladiperth said:
ah oki perfect!!
i have to wait now, its downloading..
and what u think about 5.1 arm super?
Click to expand...
Click to collapse
These are about your Google apps usage if you use all of em I recommend aroma.
With aroma you can check out the ones you don't need. And I think s3 system space does not have enough storage for super at least on my i9300 it is that way.

Is there is a CM12 or 13 for SM-E500F???

Guys i am not able to find any ROM to my device. Please suggest me some good ROMs. Thank you.!!

rakshushetty said:
Guys i am not able to find any ROM to my device. Please suggest me some good ROMs. Thank you.!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...t/rom-cyanogenmod-13-galaxy-e5-e500h-t3290755
u can install it...

Nadeem1122 said:
http://forum.xda-developers.com/gal...t/rom-cyanogenmod-13-galaxy-e5-e500h-t3290755
u can install it...
Click to expand...
Click to collapse
The link you provided mentioned a ROM for SM-E500H. Does it also work for SM-E500F??

ovi.dire said:
The link you provided mentioned a ROM for SM-E500H. Does it also work for SM-E500F??
Click to expand...
Click to collapse
yes

Yes i think. But for me i stuck in boot loops so i reinstalled stock ROM
Sent from my SM-E500F using XDA Free mobile app

rakshushetty said:
Yes i think. But for me i stuck in boot loops so i reinstalled stock ROM
Sent from my SM-E500F using XDA Free mobile app
Click to expand...
Click to collapse
I tried to install "CM 12.1 & gApps" downloaded from link found in youtube. But there was "error msg" at the time of installing "gApps". However, I am trying again with the link provided here. Will give feed back soon.

I stuck in boot loop
Sent from my SM-E500F using XDA Free mobile app

Nadeem1122 said:
yes
Click to expand...
Click to collapse
I tried in my SM-E500F. But error is shown when wiping existing OS data using TWRP recovery. "cm-12.1-20151124-UNOFFICIAL-e53g" file is installed successfully. But error is also shown when installing "gAAP.zip". So overall result is "NOTHING"...

ovi.dire said:
I tried in my SM-E500F. But error is shown when wiping existing OS data using TWRP recovery. "cm-12.1-20151124-UNOFFICIAL-e53g" file is installed successfully. But error is also shown when installing "gAAP.zip". So overall result is "NOTHING"...
Click to expand...
Click to collapse
This is for E500H variant bro, u cant install it on E500F

Angga Rizky said:
This is for E500H variant bro, u cant install it on E500F
Click to expand...
Click to collapse
But some tried for E500F , it worked. For me stuck in boot loop.

ovi.dire said:
I tried in my SM-E500F. But error is shown when wiping existing OS data using TWRP recovery. "cm-12.1-20151124-UNOFFICIAL-e53g" file is installed successfully. But error is also shown when installing "gAAP.zip". So overall result is "NOTHING"...
Click to expand...
Click to collapse
What country u have?
---------- Post added at 04:55 PM ---------- Previous post was at 04:52 PM ----------
rakshushetty said:
But some tried for E500F , it worked. For me stuck in boot loop.
Click to expand...
Click to collapse
Nope, you can't install it bcz E500F have 4g but E500H not. So there is different kernel and firmware on that package. Expect u can edit it

Angga Rizky said:
What country u have?
---------- Post added at 04:55 PM ---------- Previous post was at 04:52 PM ----------
Nope, you can't install it bcz E500F have 4g but E500H not. So there is different kernel and firmware on that package. Expect u can edit it
Click to expand...
Click to collapse
I think there is no CM released for E500F. When they may release?

rakshushetty said:
I think there is no CM released for E500F. When they may release?
Click to expand...
Click to collapse
Just wait till samsung give marhsmallow to E5 haha. I want make cm13 for e500f. Just put replace kernel and firmware e500f to cm13 for e500h. But i dont know how to repack or unpack boot.img and etc