I everybody,
I recently put a stock 2.3.6 rom on my SGS I9000 in order to upgrade to 4.1.1 (Tsunami).
The problem is that, after flashing rom and CF root I can't access recovery in no way (3 buttons or from software doesn't matter... it doesn't start the recovery). It simply stop on the first-ever screen, so I can't access recovery to wipe / to flash new rom.
What can it be?
Also, I thought that using that guide i could resolve this problem but simply it doesn't work - i waited long time with odin running but nothing happens (obviously I downloaded a total samsung stock rom).
Any advice?
Are you sure that you have installed the correct Rom with the right CF Root Kernel? Did the phone work after the Flash? Sounds like some kind of bootloop...
Biagio! said:
I everybody,
I recently put a stock 2.3.6 rom on my SGS I9000 in order to upgrade to 4.1.1 (Tsunami).
The problem is that, after flashing rom and CF root I can't access recovery in no way (3 buttons or from software doesn't matter... it doesn't start the recovery). It simply stop on the first-ever screen, so I can't access recovery to wipe / to flash new rom.
What can it be?
Also, I thought that using that guide i could resolve this problem but simply it doesn't work - i waited long time with odin running but nothing happens (obviously I downloaded a total samsung stock rom).
Any advice?
Click to expand...
Click to collapse
Can you get into gb rom? Or bootloop? And when u are in GB rom is there a cwm icon? If yes click on it and there should be An option reboot into recovery
Related
Hi there,
I'm a newbie to android. Just got my i9000 (international version of Galaxy S) for two weeks which I like it very much and flashed it to the official Froyo 2.2 (Build ZSJPD, which to my understanding is based on the European JPO) straight away. But only recently that I find out that it can neither boot into the recovery nor the download mode via the 3 button method, which makes flashing via the Odin impossible for me. I tried to download the Rom Manager to install the Clockwork Recovery Mod but I faced the same problem as the top message of this thread, i.e. it cannot get into the unsigned CWM recovery as it is running the stock 3e recovery.
Nonetheless, thanks to the "Quick Boot App", I was able to go into the stock recovery mode by clicking the dedicated button. So my question is:
Is there any way I could flash the stock kernel back to 2e recovery, given the above condition, so that I could run the CWM recovery?
Is there any apps, which would actual install a different kernel so that I could bypass the stock kernel?
Hope big guys out there could give me some hint and show me the way! Otherwise, I would miss a lot fun and can't even apply the Universal lagfix.
Alex
I am curious too. I am running ZSJPE (Asian Build) but it doesn't seem to have 2e recovery as I am unable to boot into CWM, even with ROM Manager installed.
Any help would be greatly appreciated.
aywchiu said:
Hi there,
I'm a newbie to android. Just got my i9000 (international version of Galaxy S) for two weeks which I like it very much and flashed it to the official Froyo 2.2 (Build ZSJPD, which to my understanding is based on the European JPO) straight away. But only recently that I find out that it can neither boot into the recovery nor the download mode via the 3 button method, which makes flashing via the Odin impossible for me. I tried to download the Rom Manager to install the Clockwork Recovery Mod but I faced the same problem as the top message of this thread, i.e. it cannot get into the unsigned CWM recovery as it is running the stock 3e recovery.
Nonetheless, thanks to the "Quick Boot App", I was able to go into the stock recovery mode by clicking the dedicated button. So my question is:
Is there any way I could flash the stock kernel back to 2e recovery, given the above condition, so that I could run the CWM recovery?
Is there any apps, which would actual install a different kernel so that I could bypass the stock kernel?
Hope big guys out there could give me some hint and show me the way! Otherwise, I would miss a lot fun and can't even apply the Universal lagfix.
Alex
Click to expand...
Click to collapse
It amazes me the amount of people flashing roms without 3br. Why dont you install the 3br fix? then you can do whatever you like to your phone
http://forum.xda-developers.com/showthread.php?t=785201 odin
http://forum.xda-developers.com/showthread.php?t=821698 update.zip
Try either of these before you brick your phone! it doesnt matter how carefully you follow instructions it takes just one bad flash and your history...
tragusman said:
It amazes me the amount of people flashing roms without 3br. Why dont you install the 3br fix? then you can do whatever you like to your phone
http://forum.xda-developers.com/showthread.php?t=785201 odin
http://forum.xda-developers.com/showthread.php?t=821698 update.zip
Try either of these before you brick your phone! it doesnt matter how carefully you follow instructions it takes just one bad flash and your history...
Click to expand...
Click to collapse
I've been directed to one of these links to fix the 3BR bug on my I9000, but after reading some replies I'm a little hesitant as several people have reported their phone being bricked thanks to it...
If by any chance my phone does get bricked because of this, is there any other way to re-flash or something of the sort?
EDIT: Sorry to bump an old post...
Phone: Samsung Galaxy S4 ATT I337UCUAMDL
Model Number in settings on 4.4 ROM = GT-I9505G
As the title says, I installed dandroid's newest 4.4 ROM from WICKED v5 4.2.2 and lost root. So I attempted to update my CWM Recovery from Odus 1x to the newest using Odin which failed do to write protected I suppose all though others says that doesnt effect their installs.
Where I'm at:
Cannot boot into recovery, says booting recovery the just reboots and enters Dandroid's ROM w/o root.
I'm now lost and have been reading the forums for hours. Currently downloading STOCK Samsung firmware for my device I337UCUAMDL_I337ATTAMDL_ATT.zip
CASUAL failed.
What do I need to do to get back to WORKING custom recovery w/ rooted dandriod 4.4 kitkat rom. Should I use Odin and flash stock rom then motochopper to root and try to reinstall working CWM recovery?
Please advise best course of action. My phone had been working properly with every ROM I tried before update to 4.4 ROM and attempted CWM recovery update (thinking that would fix my root issue). Thanks all!
If you have a nandroid, and I hope you do, just restore that in your custom recovery. If you don't, then you're going to have to return to stock with odin
Tried motochopper on the phone as it sits and it fails as well.
I have a stock backup but the problem is I no longer have access to any recovery. Guess I'm just gonna have to flash the stock firmware with Odin when its finished downloading and start over.
Just finished Odin flash back to samsung factory firmware. Phone stuck at att world logo on bootup, still can't access recovery. Any ideas?
GSXRspike said:
Just finished Odin flash back to samsung factory firmware. Phone stuck at att world logo on bootup, still can't access recovery. Any ideas?
Click to expand...
Click to collapse
If you flashed Odin successfully you can get into recovery.
Finally got into recovery it rebooted 3 times but just holding the req. buttons finally got me in.
Back on factory firmware and rooted w/ cwm recovery all back in place properly worrking.
I would like to use the Dandroid 4.4 ROM with this device. When I install am I going to lose root again and if so, how I do I get it back on this device since the model in the settings is going to change from I337 to I9505G after installing this ROM?
Figured it all out last night, re-flashed Dandroid's latest ROM which still caused me to loose root, then flashed SuperSU 1.51 instead of 1.80 and regained root. All is right in the world now.
GSXRspike said:
Figured it all out last night, re-flashed Dandroid's latest ROM which still caused me to loose root, then flashed SuperSU 1.51 instead of 1.80 and regained root. All is right in the world now.
Click to expand...
Click to collapse
Hey, if you dont mind me asking where did you get the 1.51 zip to flash? I'm having a similar issues with same ROM where i lost root but have recovery access.
Thanks
Update: Found the file. Flashed it. Root is back. Have you let market update it automatically? If so did you lose root afterwords?
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
It's impossibe to flash anything other than the leaked 4.4.2 stock because you flashed your bootloader to kitkat, no you MUST stay on sammy 4.4.2 till the devs found a solution for this. Thats why you have to read carefully be4 you flash.
silentvisitor said:
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
Click to expand...
Click to collapse
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
sid8907 said:
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
Click to expand...
Click to collapse
This one seems to be the only one working with 4.4.2 right now.
Possible solution
The way I can suggest is to create a little update.zip file with little updater-script to remove install-recovery.sh file from device (just one line needed).
Ok, I found a zip which I am attaching below. You(or anyone) may review the script before flashing.
Place this on your external (or internal) sdcard.
In ODIN don't check Auto reboot
Flash Recovery. Remove phone when it says PASS.
Remove battery. Start in Recovery mode by pressing buttons.
You should now be in new Recovery.
Flash that zip file.
Reboot.
You should be good.
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
I am out of ideas.
I would suggest you to wait for someone to come up with working solution. Being too adventurous with ODIN could brick your device.
sid8907 said:
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
Click to expand...
Click to collapse
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
radicalisto said:
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Click to expand...
Click to collapse
Thanks!!
sid8907 said:
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
Click to expand...
Click to collapse
You may have to do a little reading but I believe CM11 is now working on the KK bootloader...
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
jp.26 said:
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
Click to expand...
Click to collapse
so.... yeah i just updated my bootloader to 4.4.2 and this drove me literally insane. ive been working on it for 4 hours now. i encountered so many problems with installing the bootloader. exact same problem as SID8907. i gotta tell you tho.... you worked some magic my friend. i tried almost everything. then i came across your link. i was like why not? so i flashed the img in odin..... anddddd :drumroll pleaseeeeee:: IT WORKED. ahhh....... so much frustration and the problem is solved!!! thank you so much JP.26 :good::laugh:
is there any word on how to fix this been looking for hours tmobile note beast dont want to put any roots down on my phone before i find a way to flash cm or a non bloated note rom would be nice.
I'll that I've managed is to root and flash twrp I found a way to turn cwm recovery into a tar file and flash through odin. But i just get into a boot loop with cwm due to the boot loader I presume but tarp works fine I just can't flash cm11. I get boot loop every time
Sent from my SM-N900T using XDA Premium 4 mobile app
im sorry but im confused here... does this all simply mean that there is not yet a working cwm for 4.4.2 yet? and that while we can root, there is no working recovery for this version?
I'm not sure myself tarp works but I can't flash cm11
Sent from my SM-N900T using Tapatalk
Phillz cwm Dev edition I think that's the name works its a themed touch cwm. This works great but still can't flash cm so gayyyy
Sent from my SM-N900T using Tapatalk
I was wondering what happened to the cmw too.
The modded cmw by Chenglu is the only one working that I know of.
Link to thread: http://forum.xda-developers.com/showthread.php?t=2454079
Hello,
I am facing weird problem, I am not able to install custom recovery, I have tried almost everything.. nothing helped.
I am still getting stock recovery..I have tried to flash it via Odin, via some apps, unfortunatelly nothing worked.
My Samsung Galaxy S4 i9505 is running KK 4.4.2.
Any idea?
Thank you.
I had this problem too. keep flashing cwm recovery through the app (needs root I think). and reboot into recovery, once you get cwm you can flash a custom rom or another recovery like twpr or philz.
s4 i9505 stock KK
I have that problem too. I have stock KK 4.4.2 XXUGNG8 updatet ota. When i try to flash flashable zip file cwm of philz or twpr i get some error like:
E:footer bad
Mds check
Something like that and cant flash it. I tryed with odin but no luck. Does anyone have same problem?
I had this problem to
I fixed it by checking te root options.
If u use a root app, make sure it gives always root acces.
After this, install a custom recovery rom
After that you'll have no problem installing a custom ROM
Good luck.
Xehk said:
I had this problem to
I fixed it by checking te root options.
If u use a root app, make sure it gives always root acces.
After this, install a custom recovery rom
After that you'll have no problem installing a custom ROM
Good luck.
Click to expand...
Click to collapse
But my phone is not rooted, its new, with stock recovery, knox 0x0 still....
Have any idea?
Ok, but what if my phone is not rooted, how am I supposed to root it? When I tried CF-Auto-Root my phone started to reboot randomly during the phone call.
I have found one solution, but I am not sure if it works, it says that if you are flashing custom recovery via odin, you have to take out the battery after the flash is done so you won't allow your phone to restart and rewrite the recovery back to stock. Have anyone heard about it?
No, no idea.
Thats crappy.
Only know how I fixed it
icefun said:
I have found one solution, but I am not sure if it works, it says that if you are flashing custom recovery via odin, you have to take out the battery after the flash is done so you won't allow your phone to restart and rewrite the recovery back to stock. Have anyone heard about it?
Click to expand...
Click to collapse
Just uncheck auto-reboot before you flash the recovery. That will fix your problem.
I have tried it, but it didn't help still looking for solution, is there any way how to RENAME RECOVERY RESTORE FILES so I can finally flash custom recovery? (non-rooted phone)
OK, so the solution that worked was simple and I have already mentioned it, you have to take out you battery on samsung galaxy s4 logo, before it reboots.
My solution
Hi I had the same problem too,
I solved it this way: (My phone was rooted)
Download the .zip file from the recovery you want (I used CWM 6.0.4.7)
Next download 'SGS4 flasher' from the playstore.
SGS4 flasher needs root (I think) andyou can flash your recovery through that app.
Next boot into the recovery and you should probably end up in your custom revovery every time now.
If you don't end up in your custom recovery, download ROM manager and then choose the option boot into recovery.
This worked for me at least :laugh:
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
pmlfrew said:
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
Click to expand...
Click to collapse
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Racinghart91 said:
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Click to expand...
Click to collapse
Thanks will flash to lollipop today then....
pmlfrew said:
Thanks will flash to lollipop today then....
Click to expand...
Click to collapse
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
pmlfrew said:
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
Click to expand...
Click to collapse
I got it working by flashing the German non branded ROM... Got the error message again but then used a "All samsung recovery.tar" as stated on another post in here and it booted fine eventually... Now on Lollipop. Now time to flash with TWRP.... Again!!!
Please, i need help !
I need help, urgently !
My Note 4 SM-N910C does not work. I can enter the Recovery and the Download Mode. When attempting to install a Custom ROM gives me an error that says I have no data. In the internal memory I have 0mb.
I tried using odin, but I can not .. Salta error.
Someone who can make a backup of your phone (which is factory), leave me a link to download it? So I install the TWRP. Please.
They have another solution?
Thank you.:good: