Database Users

Turn off flight mode first

Greets.
Every time my magician battery goes down, the next time I use bluetooth I get
"Turn off flight mode first", even after the battery is fully charged.
Then, I must turn on flight mode, and turn it off, and then I must insert the phone PIN. THis is really annoying,
Is there any fix for this?

Dont know if you could stop it doing that.
It turns off the sd/mmc slot and phone to conserve power, when the battery is low. I find it lasts the longest per a percent when those things are off.
After all, it is a pda and it doese function more than a phone. Its just trying to save your data.
Registry hacks anyone?
whitemoo.

I get this issue even after I fully charge the battery.
For example, the battery goes low. I charge it, and then if I try to use bluetooth I get that message "please turn flight mode off".

find this
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\FlightMode]
"PhoneLocalizedName"="Phone.lnk"
& rename
like this-
"PhoneLocalizedName"="TPhone.lnk"
it`ll never be " Turn off flight mode first"
message

Is there any side effect?

Problem screen turn on during charge over night

Very bad bug, when i go bed and i leave my p6800 in charging i dont power off it,so when the tablet is fully charged the screen turn on and remains on until i wake up and turn off it manually with the standby button. So the screen remains on for about 4 hours per night! How can i do for automatically power of the screen when the tablet give tje allert that the battery is full recharged?

Did you try the screen timeout under settings>screen? As far as I can tell, it applies even when the device is plugged into a power source. I have similar practice as you but in the morning, my device would be charged and the screen off.
Sent from my GT-P6800 using xda premium

Yes, i have put the timeout to 15 seconds, but when the battery is full charged,my tablet rings and power on the display with the message that the battery is charged, i have wait 20 minutes, but the screen remains on. The only way to power off it, is by pressing the standby button wery boring, i am constricted to recharge my tablet from power off status ,in order to avoid this issue this is bad becouse i reiceive emergency calls during the night

can application->development->stay awake help? uncheck it

emprize said:
can application->development->stay awake help? uncheck it
Click to expand...
Click to collapse
Omg i dont was know this option, i have unchecked it and there was exactly described his function! "The tablet never go in standby during charge" . I am sure that this can fix the problem, i cant see for sure now becouse i have 80 % of charge, but i'll let you know tomorrow, i am sure that the problem was this thx so much

After charging full, dies out.

So it happened again. Fully charge the TF for a trip. When I get to my distination (8hrs later) turn on the TF and its dead. No power and no chargers. This thing is pissing me off!
Anyone know why or how I can fix? I do have the wifi off when screen is off.

How is that possible?
Did you not shut down your TF?

hipertec said:
So it happened again. Fully charge the TF for a trip. When I get to my distination (8hrs later) turn on the TF and its dead. No power and no chargers. This thing is pissing me off!
Anyone know why or how I can fix? I do have the wifi off when screen is off.
Click to expand...
Click to collapse
It looks like you are having the reboot during deep sleep issue that started with the upgrade to ICS. The reboots can be stuck with the screen enabled and the processor actively trying to complete the boot, which drains your battery.
Short term, I would avoid leaving the TF powered up unattended for long periods.
That will prevent the total battery drain. For a longer term work around, you can try an app called Wake Lock, which you can set to prevent the TF from going into deep sleep, and eliminate the deep sleep reboots, which has helped some users, including me.
The app should be set to restart on Reboot, and select the Partial Lock, then select the Acquire Lock setting, on the red bar, which will switch to green, and indicate that it has acquired. You can also set it to show its icon in the Notification are, so that you have a visual assurance that it is working. Then just exit the app, and it will work in the background.
You can monitor that it is preventing Deep Sleep, using the CPUspy app.
I would then watch carefully to see that you aren't experiencing any more reboots during Deep Sleep.
Long term, ASUS is researching instability with ICS, and we hope to get a true fix. Until then, use of Wake Lock may help you.
Others may have other opinions and explanations, and they may be right, but this has cured my problem for the last 11days. Good luck.
Sent from my Galaxy Nexus using Tapatalk

horndroid said:
How is that possible?
Did you not shut down your TF?
Click to expand...
Click to collapse
No shut down. I would charge the TF to 100%. turn the screen on to see if its 100% charged and that's it. Then 8hrs or so later when I want to go use the TF, its dead. Can't even turn on.
Can this be the reboot issue or an application that is running and not letting my TF go to deep sleep? Help!

hipertec said:
No shut down. I would charge the TF to 100%. turn the screen on to see if its 100% charged and that's it. Then 8hrs or so later when I want to go use the TF, its dead. Can't even turn on.
Can this be the reboot issue or an application that is running and not letting my TF go to deep sleep? Help!
Click to expand...
Click to collapse
Your response makes no sense. You say TF was shut down then you say TF might not be going into deep sleep. If you power the TF down it will go off and use NO battery. you will get some battery internal discharge but TF will not come on an use battery. Try the same test shutting it off.

Ok...try again. I would charge the TF. Then check by pressing the power button. The screen goes on and shows 100%. Then press the power button to turn the screen off ( not turning it completely off).
When I want to use the TF, it won't turn on, as if its completely dead.
Suggestion?

its either a) you get a RR and get stuck in a bootloop, b) you got some app running that drains the battery, such as Winamp or c) your device is broken (not likely).

There are many threads already posted addressing this issue. Please Learn to correctly use the search function
•••THREAD CLOSED•••

Turning off the LCD without triggering the Sleep Mode is not possible in CloverTrails

Hi everyone,
I have a ThinkPad Tablet 2. Last night I wanted to download a file, but I had a problem. I started my download through Internet Download Manager, but I couldn't turn off the display without stopping the download progress. This means Windows 8 translates "Turn off Monitor" to "Sleep Mode" so every background task stops.
I don't want to see the bright light of the screen ( even at lowest ) when I go to sleep, and more important, the health of display is a concern so I dont want it to be always on.
So I asked. And so far every app that has written for turning the display off, is somehow faulty, and it seems its just because Clover Trail which has Connected Standby thing.
I've tested NirCMD, RefreshLock, AutoHotKey and TurnOffLCD. NirCMD, RefreshLock and AutoHotKey trigger sleep mode right away. But TurnOffLCD turns of the display and download continues, but only for a time. After an unpredictable amount of time, device does not interact any more.
So what's the catch ?
Thanks in advance.

Did you find any work around for this issue ?

[Q] sleep mode on watch?

I want to spend some time developing a 'sleep mode' for android wear. I often sleep with it on and would like a mode which keeps the light off while I'm asleep.
Has there been any effort in implementing this, and how would you proceed?

weardev said:
I want to spend some time developing a 'sleep mode' for android wear. I often sleep with it on and would like a mode which keeps the light off while I'm asleep.
Has there been any effort in implementing this, and how would you proceed?
Click to expand...
Click to collapse
That would be really awesome.
Sent from my SM-G906S

Bump to that!

thats a nice idea

Great idea. I'd suggest activating sleep mode either when the watch is placed in the charger, or give users the ability to set start and stop times for sleep mode.

I agree, thats cool. It would be great if the smartwatch 3 could stand in low energy mode without light all the time. Because the smartwatch 3 has a transflective display. You could read the time with display-light off.

The closest I've seen is the sleep as android app. I've tried with mixed results but I never seem to get the watch lighting up while sleeping

There seems to be a sleep mode on the next update wear 5.0...you can get the screen on by Double tapping screen or by pressing the crown button
Sent from my SM-N910C using Tapatalk 2

Bump!
Would really love this, an app that unchecks the ”Always-on screen” setting for selected hours of the day, so that the watch automatically turns screen of when you sleep for example…

Oh please..... We need this
I hate manually turning off the watch before bed and back on in the morning. But I did get 36 hours with 9% battery left on my LG G Watch using this method

Someone should write an app that can auto toggle the new theater mode at night/quiet hours
I usually turn the watch in airplane mode in the night... Burns 1% per hr battery overnight on my moto 360
Sent from my SM-N910C using Tapatalk 2